Maintenance :: Partition Based Backup / Restore?
Sep 14, 2013
I have a question on ability to restore from an image based backup with a Win 8 compatible backup program (Acronis 2014 Premium), and not fully familiar with EFI. System is preinstalled Windows 8 on Asus F75 laptop, so disk is GPT.
Here are the partitions:
1. 300 MB EFI System Partition, FAT32
2. 900 MB NTFS Recovery Partition (would seem to be the MS Reserved partition)
3. 279 GB NTFS OS Partition
4. 398 GB NTFS Data Partition
5. 20 GB NTFS Recovery Partition
Forgetting about the 20 GB Recovery partition and the Data partition, if I wanted to return to a previous point in time for the OS, would I restore the OS partition (3), the MS Reserved Partition(2), AND the EFI System Partition, or would restoring the EFI System Partition not normally be done or recommended?
View 1 Replies
ADVERTISEMENT
Feb 14, 2014
Am using outlook.com, web based, as a backup email program. Since setting it up when I try to access it, I keep getting a screen that says 'we are having a problem access this program, try again'. When I click again, I am in the email program and ready to use it.
So far have not found why I must go through this extra step to get to Outlook.com.
I am using browser Firefox on Win 8.1 on my PC.
View 13 Replies
View Related
Mar 30, 2014
I'm having a problem trying to restore Win 8.1 after a crash. All I get is a blue screen with an error code.
I finally deduced that I was having a hardware problem with my beloved SSD (weird glitches and erratic behavior, occasional recognition errors in BIOS, and finally I/O errors when trying to restore from backup), so I pulled it out, and temporarily replaced it with a spare HDD of slightly larger size. The backup/restore program I use is Paragon, and it has worked flawlessly for me for some time, including when I migrated Win 8.0 to that SSD over a year ago. So I pulled up the last full-disk backup (from 4 weeks ago) and did a Restore to the replacement HDD, but the resulting installation will not boot. I've tried it several times, including using a different archive, and each time I get a blue screen saying "Your PC needs to be repaired", with an error code 0xc0000034.
What is this error code, and how do I go about fixing the problem? Is there some kind of issue with restoring an SSD backup to an HDD? (I know there is something about the partition alignment which may be different, for instance.) This program worked just fine in the opposite direction, meaning restoring a backup of an HDD to the SSD.
I might have been able to use the recovery media to fix the problem, if I had the current media... unfortunately, the disk I created was from prior to the 8.1 upgrade, and it won't work anymore. My mistake. But short of a clean install back to 8.0, and then another upgrade to 8.1.
View 9 Replies
View Related
Apr 17, 2013
My windows 8 pro install messed up n i have almost 2.8tb of stuff on my drive on a 3tb hd. I have an identical hd as a backup which i have (an apparently successful) a backup of my system from a couple of weeks ago on. I had set the system to do scheduled backups of the system (set to backup a system image of efi partition and c. There were a few times where i was trying to get other things done and the systemwas running slow so i cancelled the backups when i noticed them running. The software stopped the backups (seemingly successfully).
As i say my system messed up - i came home to find out it was no longer downloading (as i had left it doing when i went to work) but was on a blue screen (bsod?) saying the system needs to be restarted. Since then it didnt work well at all and after dskchk reported that several sectors were damaged so it was moving data to spare sectors (or whatever it generally reports when this happens) there were a lot of files messed up or reported as deleted when doing a file recovery scan with recuvva.
So i decided to restore the backed up system image from the other hd. Incidentally i tried mounting the vhdx backup image from that hd via windows explorer which then reported "the disk needs formatting" and didnt get any success mounting via disk management either (it mounted in the app but didnt show up on windows explorer and if i tried to access info on it via disk management it reported the same"disk needs formatting prompt".
So when i booted my win 8 dvd it didnt work cos the dvd wasnt an efi booting version so i had to boot from a usb version with the efi bit included.
I formatted the system drive and chose to do an image restore. It started doing the restore (apparently) but every time i came back to it later i had the follwing error:
"Re-image your computer
The system image restore failed.
Error details: The requested system device cannot be identified due to multiple indistinguishable devices potentially matching the identification criteria Ox80073B92"
It took me so long to set up my system n i have a lot of my own data on there too. The system drive I formatted was created in diskpart and then re formatted with "format" command (as it created the disk in raw mode) so now it is ntfs mode (uncompressed).
View 9 Replies
View Related
Aug 9, 2013
I am running a regular laptop that is not a portable workstation of any sort and yet I am unable to utilize Windows 8's hidden Backup & Restore function. I have already made the appropriate backups with Macrium but my issue is the error message itself and how it may be effecting other aspects of my Windows experience. How to tell the OS that I am not a "portable workstation"?
View 1 Replies
View Related
Oct 22, 2013
I upgraded to 8.1 this past weekend and it went just fine, however now the the Backup and Restore Center and Create Recovery Disks options are busted. Both icons appear in my app list as generic grey document icons, and if I click either of them I'm brought to the desktop and then...nothing.
I use BRC for my daily backups so I'm obviously concerned that it's not working. I tried searching for a way to reinstall these programs, but as they're part of Windows I wasn't surprised to not find anything. BRC was working fine for me prior to the upgrade so I'd hate to have to buy a third party solution now.
View 2 Replies
View Related
Oct 24, 2013
On a friend's new Dell Windows 8 desktop I tried to create a system image using Windows 7 File Recovery. I got a message saying it could not create the image. The message said "windows backup failed to get an exclusive lock on the efi system partition".
View 9 Replies
View Related
Nov 5, 2013
I am trying to create a system image backup and I keep getting this error message
[COLOR=#FF0000]'Threre is not enough disk space to create the volum shadow copy on storage location. Make sure that for all volume to be backup up, the minimum disk space required for shadow copy creation is available. this applies to both the backup storage destination and volume included in the backup. Minimum requirement for Volumes less than 500 megabytes, the minimum is 50 megabyte of free space. for voulimes more than 500 megabytes, the minimum is 320 megabytes of free space. Recommended at least 1 gigabytes free of disk space on each volumes if volumes size is more than 1 gigabytes (0x80780119)"
I am backing it up to a external HDD with over a tb of free space but I understand its not letting me perform the backup because the hidden 100mb hidden system partition is full...if i create a larger partition how can I copy that system partition to it? if that is possible....
View 6 Replies
View Related
Jul 23, 2014
Upgrading Netbook, with an SSD, so naturally I made sure I let him know beforehand that an SSD was not going to perform as advertised on his Netbook given that it only has a SATA 2 (3Gb/s) interface and a pretty low end Intel Atom based CPU.
The SSD is a Crucial MX100 128GB.
So... Is there a software I need to be running in order to get the most out of Crucial SSD's?, I'm running a Plextor SSD on my main gaming rig and it runs absolutely beastly without any software, etc.
I made sure I changed the SATA Mode to ACHI before installing Windows 8.1.
Also, I did not install any Intel Chipset drivers or anything on the Netbook given how old it is, Windows should have the latest drivers for it (I did run Windows Update).
View 3 Replies
View Related
Sep 15, 2013
I installed Windows 8 and noticed it still had a version of Windows 7 Backup & Restore.
When I installed Windows 8.1 RTM, it looks like they removed it. I've been using it on Windows 7 x64 for a while and it has saved my skin a few times.
I did a Google search and basically found that if you install Windows 8 first, then upgrade to 8.1 RTM, it leaves Backup & Restore available. I want to install 8.1 RTM directly, is there any way to install Backup & Restore or keep it somehow?
View 7 Replies
View Related
May 15, 2013
How can I restore my backup data files to Windows 8 that were created using Backup & Restore under Windows 7?
View 8 Replies
View Related
Sep 1, 2013
How to backup and restore Windows 8.1 activation?
View 1 Replies
View Related
Oct 12, 2013
1. im thinking about backup the small system partition, Windows 8.1 & win 7 (Both x64 os) but i heard that there are always issue even when hardware is not change after backup & restore os. which is better clean install or backup with utility like acronis true disk?
2. Which utility is better for such task macrium or acronis?
3. is it possible to backup system without installing these software(some boot disk) means when i restore system it won't restore installed utility (just activated OS with no extra apps)?
View 2 Replies
View Related
Aug 5, 2013
Automatic Restore Points is not working in System Restore. Task Scheduler is empty during last 30 days.
View 9 Replies
View Related
Apr 6, 2014
I have a Lenovo G585 laptop that I installed with Linux (tried dual boot) and accidentally wiped out the Windows 8.1 restore partition. Now I want to restore it to Windows. I also have a Dell desktop Windows 8.1 that I can use to to create a USB restore image, can I use a restore image from a desktop to fix a laptop?
View 2 Replies
View Related
Feb 26, 2014
I have the famous blue screen of death for the first time. I am using windows 8.1. Every time I try to boot into my rig, it says that:"windows has encountered some problems and need to restart". I am using another computer to write this message but most of all I have absolutely no clue how to resolve the issue. Restore Points were turned off in the rig to save space - Not my idea but it is what it is I have no back up - I am starting my rig and as soon as I get to the log in screen, the unit restart to a blue screen. I have a couple of options but most of them can't since I have no back up and no restore point.
When the rig restarts, I land on a blue page with 1 continue 2 troubleshoot 3 turn off your PC I choose 2 (because of tools). Then I have: 1 Refresh you PC: I need the refresh more than my PC 2 Reset your PC. It says if you want to remove all your files. Definitely not what I want to do. 3 Advanced options I choose 3 and then I get: 1 System Restore: No restore point so useless 2 System Image Recovery: No backup so useless 3 Start Up Repair: Tried that but no go 4 Command prompt: Tried that but I have no clue on how to move forward once on command prompt. 5 Start Up Behavior I picked that one and went option 1 to 4. 4 being the option that allowed to log into the unit in safe mode. Once I am in Safe Mode what should I be doing ?
View 9 Replies
View Related
Aug 10, 2014
I would like to add a partition to a drive having the following partitions:
Number Partition Size 1 Windows RE 499 MB 2 EFI System 300 MB 3 MSR 128 MB 4 C: 216 GB 5 Windows RE 450 MB 6 Samsung Image 19 GB 7 Samsung Recovery 1 GB
This should be easy to do with MiniTool Partition Wizard. In essence, resize "C:", add the partition in the unallocated space, assign the drive letter "D" to the new partition, and format it to NTFS.
You will notice that the drive has two Windows RE partitions. This is because I updated to Windows 8.1 from Windows 8 through the Microsoft Store.
View 9 Replies
View Related
Dec 12, 2013
I used to have System Reserved on separate partion to C: but on my last fresh re-install, I decided to make C: and System Reserved in one partition. Here's what shows on Disk Management:
My question is, which is better. System Reserved on the same partition with C: or on a separate partition?
View 3 Replies
View Related
Jan 13, 2014
I used to use Windows Easy Transfer to backup my settings and files before reinstalling/reimaging...etc - now that doesn't exist, and File History really doesn't cut it when it comes to apps and settings.
A system image really won't work either, as I need to reinstall windows 8.1 on a new system with different partitioning...etc.
Are there any Windows 8.1 native tools that will do it? If not, are there any freeware apps that perform the equivalent?
I have checked out Paragon Backup and Recovery (more all-or-nothing) and D7 (freeware version doesn't have automated restore - but it does create registry dumps...hmmm) but neither seems to work as simply/well as WET used to.
I have tried just saving the User profile folder, but unfortunately, that doesn't save anything that's in the registry (outlook profiles, app settings...etc).
View 2 Replies
View Related
Feb 24, 2014
I used the Easy Windows Backup on my old machine (running vista), saved to an external hard drive. Installed the latest 8.1.1 on a new machine and tried to use the Easy Windows Backup to restore my stuff, but I get this message "Windows Easy Transfer can't transfer files from Windows Vista or Windows XP".
Is there any way I can recover my files from the Easy Transfer Backup?
View 5 Replies
View Related
Jul 30, 2014
I recently tried installing Ubuntu dual boot with my Windows installation as I had done with a previous system. I somehow failed to notice I had whole disk selected rather than the option for partition. Well. Obviously it wiped my whole disk along with my Windows 8 installation. I aborted the Ubuntu install progress right away and shut down, of course it was too late to save everything.
I resorted to Testdisk. It was able to find my C: (windows) and M: partitions, which I am able to restore in order to copy and access my data, but not simultaneously. It must be only C: (Acer) or M: at a time.
At this point my data is safe. My only concern now is fixing the Windows installation, I had neglected to create a recovery drive until after this headache transpired, and that was done with my friends Dell machine. I do not have any Windows 8 discs or drives, nor do I know how to aquire it without purchasing, which is not an option.
I suppose I'd like to know if I'm going to be able to boot Windows again, using testdisk to restore the proper partition table setup and (I don't need M:, it's been backed up)
I cannot restore or refresh the system via the recovery Usb created on the other pc as it reports the drive is locked.
Laptop is an Aspire V5-552p-x440.
I cannot access Acer Recovery.
View 9 Replies
View Related
May 6, 2013
My tablet is running fine, but I did something (not bright) which could leave me in a lurch later. Here's what I did, and what I'm looking for.
Soon after I purchased my Asus VivoTab Smart, I made a USB recovery disk, complete with recovery partition. Then, to save disk space on the tablet, I deleted the recovery partition on the tablet. So far, so good. Where I blew it was when I got my flash drives mixed up and then erased my USB recovery disk! The tablet runs fine, but if I ever want to refresh it or do a reset, I need the recovery partition, either on the tablet or on a flash drive.
Is it possible to get that partition back?
View 9 Replies
View Related
Jul 7, 2014
I have a Sager NP9377 with Windows 8.1 installed. I got hit by bad viruses and need to recover. How do I access and restore from the Recovery Partition?
View 1 Replies
View Related
Dec 8, 2013
I have Dell XPS 8300 and made a set of dvds when I got the machine. I don't remember if I made them before or after a Dell tech deleted my recovery partition.I have since made a Win 8 dvd from the downloaded iso file and using the library, moved to Win 8.1.
I am asking if there is a way I can restore or obtain the recovery partition.I have the original Win 7 cd, the 2 dvds I made when I got the pc and the Win 8 dvd I created.If the recovery partition is not in the Win 7 dvds(as I said above) is there any way to get that partition back?
When I moved from Win 7 to 8 with the disc I did not see any opportunity to create this recovery disc. I thought if I selected 'custom' after 0 unallocated space, then 'drive options adv', 'new' and 'apply' it would be automatically created.I never saw anything like that so just 'next it' to Win 8.
P.S. I have a Dell Laptop which is similar to the desktop and it has the recovery partition.
View 4 Replies
View Related
Jan 16, 2014
EaseusToDo backup gives me the following error. I use security tab to allow access to everyone and still get this error. Can I run the backup in the built in admin account? I have tried system backup and Disk and Partition backup and get the same error message. This is an hd in an enclosure with a sata connection.
View 9 Replies
View Related
Nov 3, 2013
A week ago or so I had a machine failure. I had all the documents saved. It took me quite a long time to get me up and running on another machine. At the moment I'm interested in finding out if there is a possibility to backup/clone a finished installed system to a usb(bootable) drive.
In case of failure of a machine a bootable usb drive would give the option of continuing the basic work. At least you could instantly communicate with clients and so on till the new machine is installed. My Mac friend uses Superduper. What are the options in Windows 8? What 3party programs would be capable to do that?
View 9 Replies
View Related
Jan 24, 2014
I have a the Dell 15R SE 7520 which came preloaded with windows 8 . Recently I upgraded to windows 8.1 . My questions are -
1. What should I create - a rescue disk or a recovery disk ?
2. If I create a recovery disk, will it recover my windows 8.1(not windows 8) in case my OS gets corrupted .
3. I also couldn't find the product key for my OS. So , If someday I have to repair my laptop using my recovery disk ,it will not stay genuine?
View 7 Replies
View Related
Apr 2, 2013
I initially started a File History backup 6 days ago and when I open File History from the control panel it still says "Files last copied on 'and the original date'. I have set a daily preference for backing up so shouldn't the date change each day? When I click on the "run now" link a line appears saying "File History is saving copies of your files", but after about 10 seconds that line is gone and it goes back to "run now". So, it is not saving copies of my files.
I have a brand new Western Digital 3T My Book external hard drive that has the initial "File History" folder and backup on it, but if it's not going to update/backup and just stays as it, is it isn't going to be very useful.
Why won't it backup even when I click the "run now" link?
View 1 Replies
View Related
Apr 2, 2013
previously i was using windows 7 home basic 64bit OS. My battery used to give an average backup of about 2 hours. But since the time i have installed windows 8,it gives a backup of hardly an hour. I have checked all the settings in the control panel. They are all fine and proper. The fan keeps making a buzzing sound all the time, even when the CPU usage is low. This was not the case earlier. Also, my laptop is getting heated up more compared to before. What shall i do? What steps shall i take?
View 2 Replies
View Related
Sep 13, 2013
My prior pc had some major issues (win7) while I had an external WD backup drive attached. During my troubleshooting I had reinstalled win7 and hooked my backup drive back onto the system. At the time I had not taken the time to restore or take ownership of the backup drive/files. It ran fine for a while with backups occurring regularly when finally it had major motherboard issues at which point I gave up and purchased a new Dell PC with Windows 8 (one I'm using now).
After setting it up I proceeded to connect the external backup drive and restore the folder I really needed as it contained all the photos, files, music, etc from the old pc. After doing so I was able to open/view the files that were backed up on my old pc AFTER I had reinstalled win7 but could not view the older backed up files/images etc. I then used the take ownership steps in this tread but this did not appear to work either. When I attempt to open the restored files/folders from my prior pc that are older I only get a default image of the Windows 8 icon for that file. get access to all my backed up files?
View 9 Replies
View Related
Dec 2, 2012
I am trying to use Windows Backup in Windows 8 on my HP Envy h8-1414 to my external HD and I get a message saying something like, "Your last backup did not complete." The reason given is The Device is Not Ready or something like that. The error code is 0x80070015. Yet from the Desktop/Computer I can read and write to the external disk with no difficulty.
I don't want to go much further with the set up until until I can make a good backup.
View 5 Replies
View Related
