Setup Installation :: Unallocated Space On Primary Hard Drive
Nov 6, 2012
OK, long story short. I did a clean install to Windows 8 Pro 64. Because of the System Reserved partition, it showed both Win 7 and Win 8 available and would prompt to do a dual boot. I cleaned it up by following the instructions on the below link.
Dual Boot - Delete a OS - Windows 7 Forums
It now no longer dual boots, and Windows 8 is fine. The only issue remaining is that my primary drive in drive management still has unallocated space. Disk 0 has 351MB Unallocated space, and 465GB of system boot, page file, etc...
In the instructions, it says to "Right click on the partition that contains the OS you want to delete and Delete Volume. Then right click on the deleted volume and Delete Partition. Now you should have "Freespace" where this partition originally was."
Well, I can't do that. When I right-click on the unallocated space, all I can do is: New Simple Volume, Properties. Everything else is greyed out. I also can't extend the other partition, the "extend" option is also greyed out.
I'm now on Win 8... How to put that 351MB onto the main partition?
I have some unallocated space to the left of my c: drive, I have googled the issue and tried what I learned to reallocate it to my primary to no avail. I know it's just 300mb, but i would still like to recover that space if I can.
I would like to ask what is OEM, EFI and unallocated partitions?How can i merge unallocated partitions into primary one???Another question is when my alienware restart , I just see my alienware Logo, cant enter to BIOS ??Computer logins smoothly just cant seem to enter BIOS.I will attatch an image of my disk management.
I have 2 hard drives and 1 is a lot bigger than the main one. I was wondering if I changed them around would my computer run faster and how I would go about doing this, what I mean is make my larger hard drive my default disk C if possible? [URL] ....
I was recently experimenting with partitions and i had to assign 50 GB of disk space to a partition. Sadly, I noticed that after I deleted it I can't add it back to my main hard drive's space. How I can do this so I have all my disk space again?
I have 16GB of unallocated space in front of System Reserved. I was wondering if there is a way to move the System Reserved to the front. I've used GParted before and I'm guessing I am going to have to make a backup of the C drive and then move it around. (and I know, only 10MB free on C drive. )
I"ve installed windows 8.1 from fresh on a seperate parition on my macbook pro retina 2013 via Apple's bootcamp.
I allocated 40GB which when formatted is 37GB
But now I'm downloading Call of duty on steam which is 14GB however on my hard drive apparently I've only got 5GB left..
Is there a way to free up space or to see what on earth is taking up soo much space..
Ideally I want to buy Battlefield 4 on origin soon but that needs 30 GB space, obviously I'll delete the call of duty game but how can I get all my space back.
Well, since i installed Windows 8 Pro on my desktop, it already ate 26,8GB of disk space. I have no extra apps installed (posting this from Internet Explorer 10). How can i free some of that space?
i've just formatted my HDD partition where os was. After that I've also deleted the respective partition and now I can not do anything to install the os in that partition, the partition now is unallocated space. I was using Windows 8.1 before all this mess.
I have a HP Envy 4 Ultrabook and I want to install Windows 8 from scratch, I put the installation files on a flash drive from a DVD of Win 8 I had, but when I go to install it, it says the "We couldn't find any drives". I have tried using DiskPart within the CMD as well, but it only finds my flash drive when I run list disk. Also, my drives are completely formatted, and I accidentally wiped the recovery partition. I tried with a USB of Win 8 Pro, and it was fine, showing all of my drives correctly, but that version is linked to another PC, so I can't install it. Also, I booted into a Linux Mint live CD and tried to install it, it sees my hard drive correctly, but the Windows install does not, I can't figure this out, never encountered it before. Is Linux my only option at this point?
About 1-2 weeks ago, I had 15GB of space left on my SSD that is solely committed to OS and drivers. Today, I have 2.9GB left. I have downloaded nothing, and I have changed nothing. take a closer look at why my SSD space is disappearing? I've had this OS for 2 months now and it wasn't a problem until recently.
I have a windows 8 laptop and wanted to re install a whole new windows 8 on it. I'm going to use the generic product key than once installed use the one that i found with magic belly bean key finder. I am just worried that it might say something went wrong than have to buy windows 8 so could i partition the hard drive and than once i know the new windows 8 is good than delete the other?
I just installed Windows 8.1 on my system (from Windows 8) and had to restore to an earlier time (to one from earlier today). The issue is that my solid state hard drive was reduced by about 20 Gigs! I even deleted the other restore points and rebooted, but my hard drive has about 136 gigs of space. Before the restore, it was 156.
Does windows restore really eat up this much hard drive space? Is there a way to get it back?
I wiped my pb eastnote TE. I was restoring it to factory settings, i thought id just have put in my usb and it would reinstall everything for me, but it hasnt.. what to do, error mes im getting it ;there was a problem while resetting your pc, all I am getting is a blue screen, but the options they are giving me are not working...
I just bought a lenovo Z580 with windows 8 and I also have a new hard drive coming. The first thing I tried to do was create factory restore disks so that when the new hard drive gets here I can remove the old hard drive and replace it with the new one and put the pre-installed windows 8 that came with the laptop on it. I can't however find a way to create factory restore disks. Is this still possible and if not what are my options for replacing a hard drive for this laptop and using the same windows install that originally came with it? I would prefer to not have to clone the hard drive because the new hard drive is an SSD so I will want to install windows with AHCI mode on.
Ultimately, I want to do a clean install of windows 8 on the new laptop using the existing pre-installed windows 8 key. I imagine this would be pretty simple if I had windows 8 install discs but I don't have those either as they didn't come with the laptop. what my options are to make this work?
I am currently using windows7 in a 1 tb harddrive. I have another internal harddrive that im not using that has windows 8 on it but is only 150gb. How do i bring windows 8 to the 1tb harddrive i am using to replace windows 7?
I recently upgraded capacity of my hard drive (from 350GB to 500GB). I'm wondering how can I install my windows oem license from my previous hard drive to my new one. My laptop is Compaq Presario CQ58 and OS is Windows 8.
I tried to reinstall windows on a second hard drive, but it won't accept my product key, assumedly because I am already using it for the current windows installation on the first hard drive.
How do I transfer my license to allow a reinstallation on the second hard drive? That's the best option, so I can go back to the first drive if I want to.
Second option: If I wipe the current windows partition clean, will that enable me to reinstall on the second hard drive?
I just bought a 1TB hard drive and want to install windows 8 on it (since I'm used to it already) I have the files for windows 8 on my computer ready to be put on the new hard drive, but thing is, how would I do it? would I just use a simple USB stick and plug it in? or would i have to burn the files on a disk?
Amazon.com: WD Blue 1 TB Desktop Hard Drive: 3.5 Inch, 7200 RPM, SATA 6 Gb/s, 64 MB Cache - WD10EZEX: Computers & Accessories.
I have a Windows 8 DVD(got it from a tech seminar in our college)and a license key from Dreamspark. I ran Upgrade assistant and it showed some compatibility details, beside those apps and sidebar these are my concerns:
1.Secure Boot isn't compatible with your PC
Your PC's firmware doesn't support Secure Boot so you won't be able to use it in Windows 8.
2.Dell Stage
Fingertapps
What really is Secure Boot and is it really necessary after I installed windows 8?
My second concern is that I have unpartitioned hard drive, there's only C drive which has about 60 gb free space out of 581 gb. I'm confused because I used to format my old windows xp PC now and then and it has three drives and during the format process I would choose windows xp to install in C drive and in order to do so I would follow the delete partition process. I knew very less about what I was doing when I used to format it. I just memorized the steps. So i was wondering if during the upgrade process it removes all data from C drive and installs windows 8 in an empty drive like it used to be during XP installation. I'm upgrading win 8 in my Dell inspiron 15 R with genuine win 7. It's a 2 yr old laptop so I guess it has UEFI, not sure though.
I need to delete a recovery partition off my second hard drive. I've seen this link: Delete and Remove to Unlock EISA Hidden Recovery or Diagnostic Partition in Vista - My Digital Life but it's for Vista and the final command "delete partition override" doesn't work in diskpart. It comes up saying "The specified command or parameters are not supported on this system"
Yes, I really do want to delete the recovery partition because it's on my secondary HDD, I still have the recovery partition on my C: so I'm really not losing anything ....
I do this day in and day out with Volume Licensing but never with OEM installs...
A user that works at our company brought their personal laptop in, the hard drive failed hard drive tests so we have put one of our spare hard drives in and now we need to re-install Windows 8 x64.
Where do i get the installation media from if the users doesn't have a disc? Is it possible or do we need to order a disc?
Basically at the moment i am using Windows 7 Home and will be upgrading to Windows 8.1 in about a weeks time. I currently have Windows 7 installed on a 60Gb SSD and i have a secondary 500Gb Seagate Barracuda for other files. What i am wondering is if i clean install Windows 8 onto the SSD only will i still be able to use the 2nd drive in Windows 8? Basically this drive has a fair amount of music / videos etc and i would like to make to make sure i can use these. I would like to do a clean install and not an upgrade btw.
Reloading windows 8 or 8.1 on a system that the product key is embedded in the Bios.
Scenario only concerning windows 8 or 8.1 any version, also data recover is not a concern: Systems are coming in that are built by a manufacturer (Dell, Toshiba, HP, Compaq, Emachine ect.) the system(s) are out of warranty, They are either in a boot loop, blue screening when loading windows or the hard drive has crashed and isn't loading windows at all. The customers never created recovery disks, nor can we due to windows not loading. We can not get to advanced mode and even if and when we can, creating recovery media is not available.
So let us be clear: We have a system that had windows 8 or 8.1 preinstalled by manufacturer, it was used for multiple months, no recovery media create, now the operating system is not loading, recovery partition corrupt or not accessible, refresh not available, windows product key is embedded in the Bios and is out of warranty.
What we have tried: System with failed hard drive with windows 8 sticker on it. Ran software that extracts product key from BIOS, Inserted an OEM disk for windows 8 and 8.1 when asked to input key, we used the key that was extracted, the installation tells us that the product key is not a OEM key. We do not have a skip button to continue? How in the world can we reload windows 8 or 8.1 on these systems? We have gone through all of the BIOS settings and have tried everything we can think of. If the product key for windows 8 or 8.1 is embedded in the BIOS what do we need to do to make the installation find the key and use it to continue the installation and activate.
From what we are seeing we are not the only one(s) asking this question, the problem is that the reply(s) are: use system refresh, use recovery partition, use recovery media? We understand the reasoning behind having the product key embedded but it shouldn't be this hard to use what the system already has?
I built myself a new system and I am now on my third clean install of Windows 9 Pro. The first installation was nixed due to faulty programs and the second by faulty hardware. This installation seems to be fine, at least my event log is not showing any significant errors. I really don't won't to do another clean install so the question I have is:
Can I install Windows with UEFI without reinstalling on a new hard drive formatted as GPT?
I recently bought a laptop with Windows 8 and have erased the hard drive while trying to install another OS (not a good move, I know). This caused problems and now I'd like to re-install windows 8, except I have no way of doing this without knowing my product key, which I cannot access through my computer now. Is there a way to re-install windows 8 without having to purchase it again?
I am about to upgrade another PC (about 4 months old) currently running Windows 7 64bit. The PC is set up so that although the PC has the OS and programs on the SSD (C drive), all other data and info is on the 2Tb hard drive. Their is only a single user with no password and the PC was setup (configured) so that the user profile knows to put that user info and data on the 2Tb hard drive.
I want to do a clean install and am happy to clear everything on the C drive (SSD) and the hard drive. When installing Windows 8 from the ISO image on a DVD, how do I create the similar situation that I had for user profile when running Windows 7?
Also is it possible to be able to boot up straight in to the user without having to enter a password, as I can currently do on the Windows 7 boot?
I have just upgraded an older Windows Vista PC to Windows 8 Pro through a clean install and that went perfectly, but only had a single 1Tb hard drive (C drive).
I bought a brand new Acer Aspire xc600 today and it had Windows 8 installed. First thing me and my husband did was to try to install win7 (as we dislike Windows 8 for many reasons)... When it didnt work with just putting in the cd and install, we (stupidly without making recovery discs as we thought we would never need it) formated the drive and made it completely clean before installing win7 (which works now). This means we have no Windows 8 recovery disc or E-recovery management program and therefor cant do factory reset and return this piece of crap pc... (We play world of warcraft and my 7year old pc has only been updated once when it comes to graphic card to geforce 9800 and still perform better outside the game).
The performance test of the whole system give the graphics a lousy 5.0 which is worse than my husbands 3yr old graphic card as well! Only numbers that have increased is the RAM and CPU.
I feel disappointed as the graphics card should be better than mine or my husbands and have better performance even if its the "laptop sized card".
So to the issue, is there a way we could restore/reinstall the computer to factory settings with Windows 8 and Acers drivers as it was when we started it up earlier today?
Here's my situation. My computer is running Windows 8.1 There is only 1 physical HD, but it has many partitions. Here is a picture of my current HD setup
The problem is that the WRE partition is literally sitting between my C and D drives, so when I shrink the C drive partition, I cannot extend the D drive with the unallocated space because it is not sitting right next to the D drive (I'm trying to shrink the C from 370 to ~60 GB, then extend the D from 550 to 850 GB with the C drive's unallocated space).
However, I found something called "AOMEI partition manager", which will let me shrink the C drive, extend the WRE partition with the unallocated space, and then shrink the WRE partition to get the unallocated space next to the D drive so I can extend it. So I'm basically using the WRE partition as a middleman between the C and D drives.
I'll still have the WRE partition (after extending and reshrinking it), my system partitions, recovery partition and everything like that. I just don't know if resizing the WRE partition like that will make it nonfunctional or something, even though all the data will still be on it.
FYI I have already created a full hard disk image with Acronis of the current hard drive setup before trying anything. I also have a USB drive that is bootable with a Windows 8.1 ISO that I was initially going to use to just completely format the hard drive and use Acronis as my recovery program instead of Windows recovery partitions, but I'm too worried about the EFI boot partition and all that stuff and possibly making my computer unbootable.
