Setup Installation :: Files On Secondary Hard Drive When Installing Win 8
Jan 2, 2014
Basically at the moment i am using Windows 7 Home and will be upgrading to Windows 8.1 in about a weeks time. I currently have Windows 7 installed on a 60Gb SSD and i have a secondary 500Gb Seagate Barracuda for other files. What i am wondering is if i clean install Windows 8 onto the SSD only will i still be able to use the 2nd drive in Windows 8? Basically this drive has a fair amount of music / videos etc and i would like to make to make sure i can use these. I would like to do a clean install and not an upgrade btw.
I recently upgraded capacity of my hard drive (from 350GB to 500GB). I'm wondering how can I install my windows oem license from my previous hard drive to my new one. My laptop is Compaq Presario CQ58 and OS is Windows 8.
I just bought a 1TB hard drive and want to install windows 8 on it (since I'm used to it already) I have the files for windows 8 on my computer ready to be put on the new hard drive, but thing is, how would I do it? would I just use a simple USB stick and plug it in? or would i have to burn the files on a disk?
Amazon.com: WD Blue 1 TB Desktop Hard Drive: 3.5 Inch, 7200 RPM, SATA 6 Gb/s, 64 MB Cache - WD10EZEX: Computers & Accessories.
How to clean up the windows containing hard drive from everything but the system files, because I upgraded my windows and not installed it to a clean hard drive. I have a lot of unneeded files. How to do it, without reinstalling windows.
I have a laptop that i set up with an image that loads Win8X64 UEFI Secure. If this hard drive crashes at all, will i get a chance to hook it up to as an external hard drive to another computer to pull off user files as back up?
I tried to do this scenario before i start deploying uefi secure images for my company but it wouldn't show data. I can see the drive however in devices but it won't give it a drive letter and i can't access it.
Is there a resolution to this problem that i can troubleshoot just in case i run into it in the future.
A couple of months ago I built a new system and made the jump to Windows 8.
Everything runs great apart from one thing - my secondary hard drive (which is the old one from my old rig) is having issues, which I am now only using for all my less-important programs, and movies, games and general files.
Whenever I open up the drive in Computer or Explorer, it will lock up the window/freeze for 10-20 seconds before returning to normal, in which I can then use it again. It will work for normally for around 5-10 minutes before the lockup returns.
I have the hard drive split into two partitions. Both do the same thing.
As I am nearing the limits of my C drive, I have been purging applications and moving them to a secondary D drive. One of the uninstalled apps, Microsoft Visual Studio 2012 Pro, opened up space on my drive, but also left about 29 uninstalled programs (and I assume, many unnecessary folders). According to a couple of Google searches, uninstalling these programs, even if done in the correct order, could cause some problems down the line. However, I do want to install this program on my D drive. Would installing visual studio on my d drive cause any problems (as there are 29 programs related to visual studio on the C drive)? I am running windows 8.1 on a Gigabyte p34g.
I have a HP Envy 4 Ultrabook and I want to install Windows 8 from scratch, I put the installation files on a flash drive from a DVD of Win 8 I had, but when I go to install it, it says the "We couldn't find any drives". I have tried using DiskPart within the CMD as well, but it only finds my flash drive when I run list disk. Also, my drives are completely formatted, and I accidentally wiped the recovery partition. I tried with a USB of Win 8 Pro, and it was fine, showing all of my drives correctly, but that version is linked to another PC, so I can't install it. Also, I booted into a Linux Mint live CD and tried to install it, it sees my hard drive correctly, but the Windows install does not, I can't figure this out, never encountered it before. Is Linux my only option at this point?
I have a windows 8 laptop and wanted to re install a whole new windows 8 on it. I'm going to use the generic product key than once installed use the one that i found with magic belly bean key finder. I am just worried that it might say something went wrong than have to buy windows 8 so could i partition the hard drive and than once i know the new windows 8 is good than delete the other?
I wiped my pb eastnote TE. I was restoring it to factory settings, i thought id just have put in my usb and it would reinstall everything for me, but it hasnt.. what to do, error mes im getting it ;there was a problem while resetting your pc, all I am getting is a blue screen, but the options they are giving me are not working...
I just bought a lenovo Z580 with windows 8 and I also have a new hard drive coming. The first thing I tried to do was create factory restore disks so that when the new hard drive gets here I can remove the old hard drive and replace it with the new one and put the pre-installed windows 8 that came with the laptop on it. I can't however find a way to create factory restore disks. Is this still possible and if not what are my options for replacing a hard drive for this laptop and using the same windows install that originally came with it? I would prefer to not have to clone the hard drive because the new hard drive is an SSD so I will want to install windows with AHCI mode on.
Ultimately, I want to do a clean install of windows 8 on the new laptop using the existing pre-installed windows 8 key. I imagine this would be pretty simple if I had windows 8 install discs but I don't have those either as they didn't come with the laptop. what my options are to make this work?
I am currently using windows7 in a 1 tb harddrive. I have another internal harddrive that im not using that has windows 8 on it but is only 150gb. How do i bring windows 8 to the 1tb harddrive i am using to replace windows 7?
I have an asus s500ca ultrabook it has a 24gb ssd which is being used as a cache drive and a 500gb HDD which has windows installed on it. If I wipe out the 500gb hdd and re-install windows 8.1 on it and leave the 24gb drive alone will it still act like a cache drive?
I tried to reinstall windows on a second hard drive, but it won't accept my product key, assumedly because I am already using it for the current windows installation on the first hard drive.
How do I transfer my license to allow a reinstallation on the second hard drive? That's the best option, so I can go back to the first drive if I want to.
Second option: If I wipe the current windows partition clean, will that enable me to reinstall on the second hard drive?
I have a Windows 8 DVD(got it from a tech seminar in our college)and a license key from Dreamspark. I ran Upgrade assistant and it showed some compatibility details, beside those apps and sidebar these are my concerns:
1.Secure Boot isn't compatible with your PC
Your PC's firmware doesn't support Secure Boot so you won't be able to use it in Windows 8.
2.Dell Stage
Fingertapps
What really is Secure Boot and is it really necessary after I installed windows 8?
My second concern is that I have unpartitioned hard drive, there's only C drive which has about 60 gb free space out of 581 gb. I'm confused because I used to format my old windows xp PC now and then and it has three drives and during the format process I would choose windows xp to install in C drive and in order to do so I would follow the delete partition process. I knew very less about what I was doing when I used to format it. I just memorized the steps. So i was wondering if during the upgrade process it removes all data from C drive and installs windows 8 in an empty drive like it used to be during XP installation. I'm upgrading win 8 in my Dell inspiron 15 R with genuine win 7. It's a 2 yr old laptop so I guess it has UEFI, not sure though.
I need to delete a recovery partition off my second hard drive. I've seen this link: Delete and Remove to Unlock EISA Hidden Recovery or Diagnostic Partition in Vista - My Digital Life but it's for Vista and the final command "delete partition override" doesn't work in diskpart. It comes up saying "The specified command or parameters are not supported on this system"
Yes, I really do want to delete the recovery partition because it's on my secondary HDD, I still have the recovery partition on my C: so I'm really not losing anything ....
OK, long story short. I did a clean install to Windows 8 Pro 64. Because of the System Reserved partition, it showed both Win 7 and Win 8 available and would prompt to do a dual boot. I cleaned it up by following the instructions on the below link.
Dual Boot - Delete a OS - Windows 7 Forums
It now no longer dual boots, and Windows 8 is fine. The only issue remaining is that my primary drive in drive management still has unallocated space. Disk 0 has 351MB Unallocated space, and 465GB of system boot, page file, etc...
In the instructions, it says to "Right click on the partition that contains the OS you want to delete and Delete Volume. Then right click on the deleted volume and Delete Partition. Now you should have "Freespace" where this partition originally was."
Well, I can't do that. When I right-click on the unallocated space, all I can do is: New Simple Volume, Properties. Everything else is greyed out. I also can't extend the other partition, the "extend" option is also greyed out.
I'm now on Win 8... How to put that 351MB onto the main partition?
I do this day in and day out with Volume Licensing but never with OEM installs...
A user that works at our company brought their personal laptop in, the hard drive failed hard drive tests so we have put one of our spare hard drives in and now we need to re-install Windows 8 x64.
Where do i get the installation media from if the users doesn't have a disc? Is it possible or do we need to order a disc?
Reloading windows 8 or 8.1 on a system that the product key is embedded in the Bios.
Scenario only concerning windows 8 or 8.1 any version, also data recover is not a concern: Systems are coming in that are built by a manufacturer (Dell, Toshiba, HP, Compaq, Emachine ect.) the system(s) are out of warranty, They are either in a boot loop, blue screening when loading windows or the hard drive has crashed and isn't loading windows at all. The customers never created recovery disks, nor can we due to windows not loading. We can not get to advanced mode and even if and when we can, creating recovery media is not available.
So let us be clear: We have a system that had windows 8 or 8.1 preinstalled by manufacturer, it was used for multiple months, no recovery media create, now the operating system is not loading, recovery partition corrupt or not accessible, refresh not available, windows product key is embedded in the Bios and is out of warranty.
What we have tried: System with failed hard drive with windows 8 sticker on it. Ran software that extracts product key from BIOS, Inserted an OEM disk for windows 8 and 8.1 when asked to input key, we used the key that was extracted, the installation tells us that the product key is not a OEM key. We do not have a skip button to continue? How in the world can we reload windows 8 or 8.1 on these systems? We have gone through all of the BIOS settings and have tried everything we can think of. If the product key for windows 8 or 8.1 is embedded in the BIOS what do we need to do to make the installation find the key and use it to continue the installation and activate.
From what we are seeing we are not the only one(s) asking this question, the problem is that the reply(s) are: use system refresh, use recovery partition, use recovery media? We understand the reasoning behind having the product key embedded but it shouldn't be this hard to use what the system already has?
I built myself a new system and I am now on my third clean install of Windows 9 Pro. The first installation was nixed due to faulty programs and the second by faulty hardware. This installation seems to be fine, at least my event log is not showing any significant errors. I really don't won't to do another clean install so the question I have is:
Can I install Windows with UEFI without reinstalling on a new hard drive formatted as GPT?
I recently bought a laptop with Windows 8 and have erased the hard drive while trying to install another OS (not a good move, I know). This caused problems and now I'd like to re-install windows 8, except I have no way of doing this without knowing my product key, which I cannot access through my computer now. Is there a way to re-install windows 8 without having to purchase it again?
I am about to upgrade another PC (about 4 months old) currently running Windows 7 64bit. The PC is set up so that although the PC has the OS and programs on the SSD (C drive), all other data and info is on the 2Tb hard drive. Their is only a single user with no password and the PC was setup (configured) so that the user profile knows to put that user info and data on the 2Tb hard drive.
I want to do a clean install and am happy to clear everything on the C drive (SSD) and the hard drive. When installing Windows 8 from the ISO image on a DVD, how do I create the similar situation that I had for user profile when running Windows 7?
Also is it possible to be able to boot up straight in to the user without having to enter a password, as I can currently do on the Windows 7 boot?
I have just upgraded an older Windows Vista PC to Windows 8 Pro through a clean install and that went perfectly, but only had a single 1Tb hard drive (C drive).
I bought a brand new Acer Aspire xc600 today and it had Windows 8 installed. First thing me and my husband did was to try to install win7 (as we dislike Windows 8 for many reasons)... When it didnt work with just putting in the cd and install, we (stupidly without making recovery discs as we thought we would never need it) formated the drive and made it completely clean before installing win7 (which works now). This means we have no Windows 8 recovery disc or E-recovery management program and therefor cant do factory reset and return this piece of crap pc... (We play world of warcraft and my 7year old pc has only been updated once when it comes to graphic card to geforce 9800 and still perform better outside the game).
The performance test of the whole system give the graphics a lousy 5.0 which is worse than my husbands 3yr old graphic card as well! Only numbers that have increased is the RAM and CPU.
I feel disappointed as the graphics card should be better than mine or my husbands and have better performance even if its the "laptop sized card".
So to the issue, is there a way we could restore/reinstall the computer to factory settings with Windows 8 and Acers drivers as it was when we started it up earlier today?
Here's my situation. My computer is running Windows 8.1 There is only 1 physical HD, but it has many partitions. Here is a picture of my current HD setup
The problem is that the WRE partition is literally sitting between my C and D drives, so when I shrink the C drive partition, I cannot extend the D drive with the unallocated space because it is not sitting right next to the D drive (I'm trying to shrink the C from 370 to ~60 GB, then extend the D from 550 to 850 GB with the C drive's unallocated space).
However, I found something called "AOMEI partition manager", which will let me shrink the C drive, extend the WRE partition with the unallocated space, and then shrink the WRE partition to get the unallocated space next to the D drive so I can extend it. So I'm basically using the WRE partition as a middleman between the C and D drives.
I'll still have the WRE partition (after extending and reshrinking it), my system partitions, recovery partition and everything like that. I just don't know if resizing the WRE partition like that will make it nonfunctional or something, even though all the data will still be on it.
FYI I have already created a full hard disk image with Acronis of the current hard drive setup before trying anything. I also have a USB drive that is bootable with a Windows 8.1 ISO that I was initially going to use to just completely format the hard drive and use Acronis as my recovery program instead of Windows recovery partitions, but I'm too worried about the EFI boot partition and all that stuff and possibly making my computer unbootable.
I got the replacement hard drive from Dell that I was told would come with Windows 8 and drivers preinstalled. Well I installed the hard drive and it tells me that NO OS can be found. I didn't have a chance to make backup discs of my own but Dell sent a Windows 8 Recovery Media CD with the laptop and now with the replacement hard drive.
When trying to install Windows 8 onto the new hard drive I get to the part where it tells me to choose a partition to install Windows 8 on and none of them will let me. There are 5 to choose from and I don't know what to do to get past this. The biggest partition which is 5 has about 934GB of space left out of 1TB but as I mentioned I can't choose it or any of the other ones for installation.
I've never had trouble like this reinstalling other versions of Windows.
I have recently purchased and new computer with Windows 8. It's running smoothly, however I am encountering one particular problem.
My primary boot device is a 128GB SSD and obviously I want that space for the operating system install and some essential programs (photoshop, fireworks etc.).
My secondary device is a standard 1TB HDD. This is what I want to be my storage space for files, documents and non-essential programs.
The problem - Whenever I try to install a program to my second drive it comes up with the following error
"Error Writing to D:lahblahlahlah.xml. Verify that you have access to that directory"
I have check my permissions in the security tab and made sure that all the right check boxes are clicked. I have made sure to run the program as administrator and I've check to make sure that the directory is not set to 'read only'.
I recently received a second monitor for the use of a secondary monitor, but it has a VGA port and no DVI port. This was an issue because my graphics card (NVIDIA GeForce GTX 760) does not have a VGA port.
I purchased a DVI-D to VGA adapter (turns out it was a 5-pack) and it is not detecting it.
I purchased a new laptop with windows 8 and used the options in windows 8 to create recovery media and chose the usb drive option. I was wondering if I would be able to copy the files in the usb drive onto my external HD; then if I ever need them I could put them back onto a usb drive and reinstall windows 8. I took a screenshot of the files on the usb drive.
My old Sony Vaio broke the other day, so I've just got a new laptop. The Vaio was Vista, but now I'm on Windows 8.
I'd been backing up my Vaio to an external harddrive, but all I ever did was run the backup and let it get on with it. So for example, within the external harddrive now it just has a list of the dates I ran a backup, followed by 'Backup files 1', 'Backup files 2' etc. I'm hoping these include some of the documents/files I had on there, but I can't be sure. What exactly will have been backed up here?
I've been trying now to restore these files on my new laptop, but I can't seem to find a way. Is it possible?
