so a few years ago i bought this pc and as Always i make 2 partitions one for backup and the other for windows and all the other stuff.
So today i wanted to reinstall windows because the Disk 0 partition fitness was 0% and randomly freezing. as my other half was like 70-80% fitness (rated by Speedfan). But this never happened to me, usually Partition C and D Always were on the same "disk #" and now they are separated and i just cant get them back.
now i want to put them back together and make one whole HDD, any way to get them back to eachother?
with this ill add some pictures, since a picture says more than 1000 words.And Edit, maybe usefull. i've noticed my partitions turned into 2 different "bus numbers" Bus number 0 and bus number 1
I have a laptop with Windows 8 installed in a 256Gb SSD. There's a 32Gb recovery partition whose purpose is to recover the drive to factory install. Since I already imaged this recovery partition to an external drive I would like to delete it and merge it to the main C partition to increase capacity. I know I can do this easily with 3rd party solutions (Easus, etc), but I'd like to do it using the Windows 8 built in Disk Management. I tried but when I right click on the 32Gb recovery partition the only option that shows up is "Help", it does not show any other option that shows for the other partitions (Shrink, etc).
i want to resize my partitions and yesterday i use acronis disk director boot cd and saw a learning clip but when boot from cd , the acronis shows my partitions but said "unsuppoerted" and i could not resize them(all of the options were disabled) why?
I had a 17 GB unallocated partition. I changed it to a Primary partition. It is empty. Can I merge it with the C: partition ? Picture--- edit--- A picture---
I would like to ask what is OEM, EFI and unallocated partitions?How can i merge unallocated partitions into primary one???Another question is when my alienware restart , I just see my alienware Logo, cant enter to BIOS ??Computer logins smoothly just cant seem to enter BIOS.I will attatch an image of my disk management.
I just bought a new laptop - an ASUS N550JV - with a single 1TB hard drive. I specifically sought a 1TB hard drive because I intend to store a lot of photos on the laptop and already have over 600GB of photo data to store.
When I got the laptop the first thing I did was to go through the windows update process to get everything up to date, then I upgraded to Windows 8.1 (the laptop came with Windows 8), then I ran the windows update again until everything was up to date.
It was only then that I opened up file explorer with the intention of setting up a basic folder structure for the files I planned to transfer to the laptop. I was dissapointed, at that point, to discover that instead of a single 1TB C: drive, I saw a 370+ GB C: drive and a 530GB + D drive. I confirmed with system information that there is indead just a single drive, and that it thus came partitioned into 2 primary volumes (which, btw, still don't add up to 1TB BTW!). This setup really doesn't work for me, because the "larger" volume is still too small for all my photos, and it would be illogical and inconvenient to have to split up the photos so that some were on the C drive and some on the D drive.
Could I somehow merge the two partitions back into one primary drive, or at least re-size them so that the D drive had at least, say, 750GB, and shrink the C drive accordingly. He pointed me to the Disk Management utility and directed me to delete the (still empty) D drive, which would make that storage space unallocated, then extend the C drive to use that unalocated space. I was able to delete the D drive, and confirmed that there was now 530+ GB of unallocated space. However, when I click on the C drive the option to extend is greyed out.
I did a bit of Googling at this point and discovered that you can can only extend to contiguous unallocated space, and the unallocated space was NOT contiguous - there is a 350MB "Recovery Partition" between the C and D (or unallocated) spaces. In fact, there were multiple recovery and other partitions. (From left to right: 100MB "EFI System Partition", 900MB "Recovery Partition", 370+GB "Primary" C Drive with Boot etc, 350MB "Recovery Partition", 530+GB "Primary" D drive, and 20+GB "Recovery Partition").
Of course I would be too scared to delete the recovery partition, but there's no option to do so anyway ...
I asked the family member again and he suggested creating a USB Recovery Drive and, in the process, wipe the recovery partition. So used the windows utility to create a recovery drive, and sure enough, at the end it asked if I wanted to delete the recovery partition and I said yes. The good news is that this removed the 20GB partition, and I was able to extend the D drive to use that newly unallocated space. The bad news is that the 350MB recovery partition still lies between the C and D drives, preventing me from merging the two.
Again through Googling I found that there are tools I could use to force delete the recovery partition, but I'm afraid to do so and kill my computer or recovery options all together. I also heard that this 350MB recovery partition was created when I upgraded to 8.1, and that rolling back to my factory setting won't remove the partition?
So the question is, what can I do? Is there an easy way to "move" the recovery partition to the end of the drive without breaking any functionality that it might have? What would happen to my computer if this recovery partition were to "break" or get removed? Is it best that I just "live with it" the way it is despite the inconvenience?
Unable to start Disk Management. I tried the following without success:
- Check file integrity - Repair with DISM - Start the Virtual Disk Service and Volume SHadoy Copy manually and set them to Automatic and Manual (it starts, but Disk Management cannot connect to it) - Disable Firewall and Antivirus - Verified that my system is malware free - Tried opening it in Safe Mode
on my computer with windows 8 format as I am. Dvd format to format I've installed disk, but I erased or something during the installation, format the error output. The computer BEGAN to GIVE the following ERROR :
GIVEN WARNING
Error: no boot disk has been detected or the disk has failed. </b> <img class="decoded" alt="http://i.hizliresim.com/W2jNzN.jpg" src="http://i.hizliresim.com/W2jNzN.jpg" />
I'm running windows 8 on a partition so I use it mostly for gaming. I have 115 GB on the partition, and when I totaled all the files in my Bootcamp drive it comes to a total of about 80 GB, 50 from games, 20 from the OS. However, I'm constantly getting error messages saying that my disk is almost full and that 105 gigabytes have been used. I've tried CCleaner and disk cleanup but nothing big is found. So why would it be using space greater than what can be seen in the disk when using explorer and is there any way to fix this error (if it is one)?
My Problem Is That In After Installing Both Windows 7 And Windows 8,In Windows 7 Partition Has Original Files.But In Windows 8 Every Partition Shows Files Of Another Partition.
Is it still possible to bring a disk offline using Disk Management (diskmgmt.msc) in Windows 8 the same way it was possible in Windows 7 or is using Diskpart.exe the only way?
My hard disk crashed. I have a recovery cd created on the time of purchase. I bought a new hard disk for this purpose. Now when I am trying to recover from the same cd it is getting stuck at 40 % showing error. I searched for this error and got something as such recovery disk can work on OEM hd. As my old hd has crashed how can I recover over there. Is there any system that dell provide me with necessary operating system so that atleast I can use my system.
I originally built my computer with two 1 TB hdd as RAID1 with Windows 8 Pro 64 Bit as the OS.
The boot files eventually became corrupted. I could not reinstall Windows 8 on the RAID 1 array. So I then purchased two 2 TB HDD and created a new RAID 1 array which Windows 8 readily loaded onto.
I then added the two original 1 TB HDD to the computed to use for photography and media storage. They also showed when booting my computer as a separate RAID 1 array, but were listed as "repair." I went into the RAID BIOS and separated the array. I connected only one of the 1 TB HDD, and the drive was the "E" Drive in my computer, but I was unable to access it. "E: is not accessible. Access is denied." Disk Management showed the drive as DISK 1, but as two partitions: System Reserved 350 MB NTFS Healthy (Active, Primary Partition) and 931.17 GB NTFS Healthy (Primary Partition). I used Diskpart to create a Primary partition and format the disk. That HDD now works fine. Unfortunately I did not backup the data on that HDD, which I would like to have.
I did try the second mirrowed 1 TB HDD on the computer before formatting the first and was able to access all of the data on the HDD.
Now after formatting the first 1 TB HDD, I added the second 1 TB HDD from the original RAID 1 array back onto the computer, wanting to retrieve the data on it. This HDD does not show on My computer and is not assigned a drive letter. However the HDD is listed in Disk Management as DISK 2 and partitioned into System Reserved 350 MB NTFS Healthy ( active, Primary Partition) and 931.17 GB NTFS Healthy (Primary Partition). Looking for retrieving the data on this disk, copying it to another HDD, and then creating one partition on this HDD? How to assign the HDD a drive letter. I would like to format this HDD after copying the data, and have my computer assign it a drive letter so that I can use it.
When i convert the disk says that the disk needs to be formatted.Does that format everything or only not the windows files (so the vital-to-run files )??
I bought 8 Pro a few months ago and installed it on my desktop pc. I then purchased the upgrade to get Media Center. I have spare parts to build another pc and was wondering if the 8 Pro disk is "not in use" and can be installed as when I did the Media Center upgrade I had to enter a new product key.
I have (had) a dual boot with Windows 8.1 and win7 and I was using EasyBCD to edit the boot order. Now, when I try to reboot, I get a blue screen - saying 'RECOVERY - Your PC needs to be repaired'. I have a bootable USB recovery medium for win 8 but the problem is that I can't boot to it and fix the problem because I can't access the boot menu in my BIOS. The usual F12 option to select the boot device isn't showing up no matter what I do. I read that it has something to do with Windows 8's hybrid shutdown system. Is there any way to get out of this 'hybrid shutdown' so I can once again access the boot menu?
A close friend of mine has problems with the hard drive, I reckon. His disk usage it's always close to 80% reaching 100% several times, making impossible to accomplish even the easiest things like listening music or watching SD videos. I've checked the processes and evey thing seems right, cpu usage is very low. I can't figure out what's the problem. The notebook is new, 2 weeks...
I'm attaching a screenshot of a crystal disk report, it's in italian but you should be able to understand it!
I have an HP Envy notebook. bought it 3 months ago. made recovery disk (actually it's on a flash drive). Had troubles with the notebook. HP support walked me through factory reset. Twice.
Never used the flash drive. used whatever was on the computer. Whether or not to keep the recovery stuff I put on the flash drive? Just wondering if its a waste of a perfectly good flash drive, seeing as I never used it when I reset.
I have attached the Windows 8 hard disk from my broken laptop to my external usb hard disk device and windows 8 say format the disk as it does not recognise the file system how do I get around this.
Recently I bought a new hard drive to replace my old one because it failed and just stopped working, I have a Sony vaio laptop that was pre- installed with windows 8 and assuming the activation key is in bios because I have only a windows 8 sticker at the back. With that out of the way the real issue is how i install windows 8 without a disk since I never got one with the laptop when I bought it. I got a spare computer I can use to create a disk or a Installing through an USB, but at this moment I don't have any empty disk available I heard its possible through USB so am planning on using this method. So how would I create an USB that I can use to install windows 8. Lastly, if I did make a USB would i have to enter an activation code or will the one in the bios work.
some have been successful converting GPT partitions to MBR. I'm still trying to get TrueCrypt to run on my Fujitsu Win 8 laptop with GPT. TrueCrypt does not currently support GPT, and it looks doubtful if it ever will.
I have spent some time creating image files and restoring them with True Image 2013. I have not found a way with that program to get Win 8 to be formatted as MBR.
I was recently experimenting with partitions and i had to assign 50 GB of disk space to a partition. Sadly, I noticed that after I deleted it I can't add it back to my main hard drive's space. How I can do this so I have all my disk space again?
Randomly my disk usage will rocket up to 100% and sit there locking up my computer and freezing things that i am doing. problems started right out of the box when i got my laptop. CCleaner seemed to lower the amount of times it happens, but it still occurs. I've ran virus/malware scans there is nothing. so its ether windows doing stuff on its own randomly then consuming my whole disk or its having compatibility issues with some program that i have running. this is interfering with gaming and school work. I will include pics of multiple instances of it locking up. I can also include a list of the programs I have on here.
i have an Acer Aspire V3 772G 9653 intel core i7 - 4702MQ Nvidia Geforce GTX 760M 8 GB DDR3 memory 1 TB hard drive
all while missing from my computer , in task manager saw something about some .Net framework doing stuff, some language don't know what optimization, then triggers also the antimalware service, windows update,something called tiworker (windows modules installer) that survived 3 restarts already and also disabling windows update
I do no t want any of that.
What can I do, there are tens , maybe one hundred as far as I know, services. A mire.
Will I be able to still run a windows machine in 2013 with a really bare minimum services?
Does switching to bblean as shell will get rid of many of them? But most surely don't because shell and services two different meals.At least that I will try it to see for myself.
I need to retrieve a couple legacy files that are on a 1.44 disk. I bought a USB 1.44 drive, but win 8.1 doesn't see it in Win explorer; when I went the "find new devices" route (in Devices), it didn't see the Usb 1.44.
I went into bios and enabled some sort of "recognize legacy usb", but that had no effect.
How do I get this thing recognized and installed - it didn't come with any drivers.
For some reason my disk usage is always at 100%, it never spikes its just a constant 100% and i think its hurting my performance, is there any way to lower this?
