I need to retrieve a couple legacy files that are on a 1.44 disk. I bought a USB 1.44 drive, but win 8.1 doesn't see it in Win explorer; when I went the "find new devices" route (in Devices), it didn't see the Usb 1.44.
I went into bios and enabled some sort of "recognize legacy usb", but that had no effect.
How do I get this thing recognized and installed - it didn't come with any drivers.
My dvd palyer is not recognized by windows 8.1 one minute it is there then it's gone. Sometimes I get an error when clicking on dvd icon in explorer, then the dvd icon disappears.
View 2 Replies View RelatedI recently purchased a WD 1TB external portable hard drive.When I first got it it was immediately recognised by my laptop (a 2 day old Asus Ultrabook S400C). This is my first time with Windows 8 so I am still learning to navigate it.
The first thing I did was transfer 650gb of movies and music across. I didn't format the hard drive first, maybe that was my first mistake. My files were still recognisable on my laptop and my WD TV Live media centre. The next day all of a sudden my media player wouldn't recognise it and when I plugged it back into my laptop it also cannot see it.
The device can be seen in device manager (when I click on properties it says it's working corectly), but not in the drives list in my computer. It is showing as "Disc 2" 'Not Iniitialised' and when I click on 'Initialise' and choose 'MBR' and hit OK it comes up with this error msg: 'The request could not be performed due to an I/O device error'.
we ordered a bunch of Asus T100TA transformer book tablets for a customer. One of them wouldn't recognize bluetooth or wi-fi and it had a problem with the Broadcom Serial Bus Driver over UART Bus Enumerator. After numerous driver downloads and installs and even a full factory restore (whatever option in windows 8 where it deletes everything and reinstalls the OS), the issue still persisted. Since the tablet was brand new, we just submitted a DOA request from our wholesaler and sent the tablet back. No big deal, figured it was a hardware issue. The other day, a Lenovo tablet came in with the EXACT same problem. Again driver installs, factory restore etc and the issue is still there. SO obviously it's not a hardware issue Again, both units have had drivers, bios and factory restores and the issue is still there, immediately after factory restore.
View 2 Replies View RelatedMy PC with Windows 8 Pro doesn't read any kind of discs. I first tried a movie then it reads, a little disc appears on the cursor which means that the disc is being read. But all of a sudden, it fails at the end and doesn't read the disc. Even a bootable disc, it just stays black with a blinking line then it fails to read it as well. No errors or messages, it just proceeds to the Windows 8 loading screen.
View 4 Replies View RelatedMy WMC has been working just fine since it was released for Windows 8. I opened the programme today to check tv programmes only to find that "Viewing or Listening Conflict - No tuner available to satisfy the current request".
I have a TV Tuner card : AVerMedia H751 Hybrid Analog/DVB-T with the latest and only drivers installed. by visiting AVer Media website.
When I did a compatibility test for Windows 8 there was no conflict, hence I've been viewing TV with WMC until today.
What happened today, nothing that I know of. Windows update yesterday, so I did a system restore, no such luck it made no difference.
My system is Wndows 8 Pro with Media Centre
Intel Core i5 CPU
320GHz
8Gb RAM
64 bit OS
My husband's computer is on the same line for TV and his WMC is working just fine so it's not the connections from the wall unit to PC.
I have an Asus TF600T (Vivotab RT) that came with the Asus Keyboard Dock.
I also already had the Microsoft Wedge bluetooth keyboard.
I believe the last time I used with the Wedge keyboard or the Asus Kyeboard Dock SUCCESSFULLY was when I had RT 8.0 on this device.
I have not had need to use the keyboard until the last few days. I updated my Vivotab RT to 8.1 about 6 weeks ago. Last week I took out the Asus Keyboard Dock and connected it and all the tablet would do is make clicking noises whenever I pressed any button. It would not recognize any keystrokes. I rebooted the tablet while connected to the dock and same problem. I thought maybe the Keyboard Dock needed to be charged so I did not think anything else about it and plugged it into the charger overnight to let it charge.
I have not messed with that keyboard since that night. Tonight I get to work and I had 2 hours to kill so I decided to get my Wedge Keyboard that I have used with my Android tablet with no issues and on my RT I went into Bluetooth and paired the keyboard successfully. YES, it recognized the number code I was asked to type into the keyboard. Pair was successful and it said it was paired and it installed a driver (which looks good in device manager) but now this keyboard is behaving the same way. All the tablet is doing is clicking anytime I press a key on the keyboard. It will not recognize any keys for typing or anything else. Again, I rebooted the tablet and no luck.
I have a bluetooth mouse AND a bluetooth speaker which I HAVE been using successfully with my Vivotab RT for the last month and my bluetooth mouse which I have here at work is working fine on the tablet. I did go ahead and delete all the blueooth devices, turn the bluetooth off and on, reboot the tablet, re-paired the keyboard, successfully paired it.. and now it's back to just making the tablet click.
I was using my laptop at home and was trying to connect a USB external hard drive. About one second after I connected the device, I get a pop-up saying the device was not recognized or the device malfunctioned (which isn't the case as the device works on other computers). I tried using a thumb drive, a USB mouse and a headset, only to get the same pop-up. The computer has the Intel 4th Gen i7 4500, and is currently running Windows 8.1 (x64).
When I checked the Universal Serial Bus Controllers using the Device Manager, I see four items:
1. Generic USB Hub
2. Intel(R) 8 Series USB Enhanced Host Controller #1 - 9C26
3. USB Root Hub
4. USB xHCI Compliant Host Controller
The fourth controller has a warning sign beside it, and when I click on the controller, it says "the device cannot find enough free resources that it can use. (Code 12)" When I try to update the driver, or delete then re-install, nothing changes. I've tried downloading the USB 3.0 eXtensible (...) driver which I've read could be the fix, and it says that the machine doesn't meet the system requirements. I feel like I'm missing an "Intel(R) 8 Series" controller seeing as the one I have says "#1", but whenever I scan for new drivers or driver updates, nothing comes up.
Version: 8.1, 8.1.1 ... When updates from windows-updated are installed (which requires reboot), the "Restart now" button appears after installation. However, I decided not to restart at that time. After completing my job I shutdown by right click on start icon -> Shutdown or sign out -> Shutdown. I started my laptop the next day and checked for updates, I still see the same page where "Restart now" option is shown. With this, you cannot further check for updates.
The shutdown from start-icon is not recognized as "restart". I also checked the update history. The updates installed the other day were shown as "Pending restart".
This is happening for quite sometime. Technically shutdown and start is to be considered as restart. When shutdown from start-icon is selected, what exactly happens? Is it not shutting the PC completely?
Yesterday, I restored my Inspiron 15 to it's factory settings. Post-reset, I installed all drivers for Windows 8 directly from the Dell website except for the AMD driver which I took from the AMD website (just wanting to get the latest directly from the source, I guess). I also used that "Dell Detect" thingy to make sure I have all the latest drivers for everything.
After installing, everything worked great, but I realized that when the display turns off / when I shut down the laptop / when I close the lid, it does not turn off the computer or hibernating it or making go to sleep - it just keep running but there is no display, total darkness. Trying to press the power button / F4-F5 / any other button-pressing related solution did not work, only hard-reset.
Googling this issue, I found that it is very common, and many people with almost brand new Dell laptops, just like me, have encountered the same problem. In most of the solutions offered it was said that doing so would cause the system to mainly use the Intel Graphics HD card and not the AMD, meaning that for games and graphics, the AMD won't matter, which doesn't seem to be fair after paying extra exactly so I can have a dedicated card.
Either way, I started with the first which was using Windows Update. After checking the Windows Update updates list, I saw 2-graphic card related items - something called Graphics Adapter WDDM, one for the AMD card and the other for the Intel Graphics HD. After installing this update, I realized I can successfully turn off the laptop.
Once I turned it back on this morning, I got a pop-message:
I then realized that it just simply doesn't see/use/detect the AMD card. This is how my AMD Catalyst looks right now:
Looking at Everest, you can see it only sees the Intel Graphics HD:
However, device manager is still listing the AMD card as if it's properly working:
And if you look at the event log, you can see that initial driver was installed right after the Windows 8 fresh install I made a day and a half ago, and then there's other events, last night, around the time when I installed the Windows Update thingy:
My BT keyboard is no longer discoverable by my ASUS Vivotab ME 400C.
Seemed to suddenly stop working after a couple of incidents where a letter would be repeated 1 hundred times. (i.e. "eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee" for "e")
The keyboard was recognized by my Blackberry and is working.
I went to Windows Support section and it said to go to PC Settings/Devices/Bluetooth and turn Bluetooth on, but I was unable to locate a place to turn Bluetooth off or on.
I went into Device ManagerBluetoothBluetooth Radio and found status "Windows has stopped this device because it has reported problems (Code 43)."
This may have occurred quite shortly after I installed an ASUS BIOS update, but I think it was a couple of days at least. I installed Windows 8.1 when it was initially released and had problems with SDBUS shutting down the tablet. The BIOS update fixed that.
I checked the Driver on the Bluetooth radio and it says it's the best one for the device.
I thought maybe I should uninstall/re-install the driver but I've never done this. That is I don't know if the Bluetooth icon will disappear altogether or something wierd.
i accidentally disabled my disk drive and i cant re-enable it again here's a picture for the propertes and i cant find the enable box !
View 9 Replies View RelatedIts been 2 hours since this problem occured. i started my laptop and saw that some icons were white, when i clicked on the icon it says "The drive or network connection that the shortcut Counter-Strike.lnk refers to is unavailable.
This is the screenshot of my disk management. I have very important data in these drives
So I've been playing around with FreeNAS on another rig, you install the server on a USB drive and run the server form the flash drive. I've decided to go another rout and not use free nas so I went to format the 2 flash drives I was messing with and there are some partitions I can't remove with disk management, and space missing.
disk 1.jpg
Disk 3 should be 4GB large but I can only find the 943 MB
disk 2.jpg
disk 3.jpg
It doesn't give me any options to change the volumes on Disk 4.
I just wondering but it is the second time my netbook has done this (in less than 4 months) but I have had to restart 2 times because of disk errors. Does this mean that my HDD is dying...
View 9 Replies View RelatedFirst of all.. let me say that this HDD does not have any kind physical damage. It has not been dropped.. nor it has a clicking or beeping sound.
The HDD is SeaGate FreeAgent Go 250 GB. I always watch movies in bulk. So I copy it to my HDD and plug it in the TV and use it. Today when I plugged it in to my PC for watching another set of movies, the copying was not going in a stable manner.. instead the graph showed mountain-like copying.. i.e. first it goes at much speed and then it loses and fall back to 1 or 2 mb/s.. So I thought that a defrag could set things right.
I defragged it and went for a coffee.. After coming back, the defrag was complete but i was unable to open the HDD.. I safely removed it but it said it was in use.. I shut down my PC and unplugged it.. turned on my PC but when I insert my HDD its unreadable.. it shows no percentage of free space.. only just Local Disk F.. ( earlier it used to show FreeAgent GO) I ran chkdsk F: /f /r.. but it showed some error.. I closed it. The log file is attached..
Now whenever I open my HDD, its stops responding.. I know it can be solved..
I have a Toshiba 2TB External HD that came with NTI Backup software. Seemed to work fine until Win 8.1 installed and now I get the 'Corrupted' message, although the Drive shows up in This PC. Driver appears okay and as far as I can see the USB 3 hub the Drive is connected to is working. Have tried in USB 2 but with same result.
View 2 Replies View RelatedI've got an old 750 GB HDD (SATA) which will be fine for file serving (multi-media). It's got the standard SATA connectors (both the small one (data) and the power connector but it's ALSO got the 4 pin power connectors that you get with older IDE drives (Molex ??)
Do I need to connect BOTH power sockets or just ignore the older 4-pin IDE type connector.
Not sure why they needed BOTH power connectors -- maybe this drive might have been used also for making external HDD's at one time.
I'm minded just to connect the two SATA cables and ignore the other one.
My usb is apparently disk write protected. there is no physical switch on the usb. i can't understand it as it was working perfectly one day & the next it was write protected, it maybe to do with the fact that i formatted with 'wii backup manager' allowing me to put downloaded wii games onto the usb & play it on the wii, but i can't remember if i done this or not.
I googled the question and someone said to run cmd, diskpart, list disk, select disk X, attribute disk clear readonly, clean. it goes on for a few more steps but at this point i get the error message "DiskPart has encountered an error: The request could not be performed because of an I/O Device error. See the system event log for more information"
What can i do. the usb is only around a year old so shouldnt be damaged already.
My mother-in-law has purchased a HP laptop with windows 8 which has since updated to 8.1 (and we think update 1 - there is nothing to say update 1 on it, but it does have a power icon on the tiles screen).
When a DVD (data or film) is inserted, the drive spins up - but not to full speed - and the icon in My Computer doesn't change to show the drive is no longer empty (or changed from a previous disc).
At one point, after installing a Canon printer, I switched out the install DVD for a film. As per usual, the icon did not update. I refreshed with [F5] but nothing changed. When I double clicked the drive icon, it opened up but showed the files from the install DVD and not the Film that was in the drive.
It even went as far as to open up on of the smaller files off the DVD that was no longer in the drive. As though it had cached it for some reason. It was only when I retried to run the setup executable did it poll the drive and find out there was a new disc in there and finally allowed us to watch the Film.
The film in this case was Life of Pi - we also tried Skyfall - both of which are off-the-shelf commercial DVD's and not home-brew DVD films.
Is there any setting that can be changed? I have changed the autoplay settings to ask everytime for everything but that had no effect.
my WESTERN DIGITAL hard disk was running smoothly and i can access all datas.....but today 1 disconnected it and there after it is not showing on "my computer"...
bt d indicator light is on and it is rotatng insise......but cant access it ....
I was going to reinstalling windows on my computer and i thought put 200gb for windows 8 and and 1300gb can be for windows 7(for gaming), So i install windows 8 and shrink the hard drive size so windows 8 has 200gb. And use windows 7 for gaming but my pc is a bit s#*t and a dont do gaming any more. (only on the ps3).
So can i unshrink or something so i have 1.5tb together for windows 8?
[URL] .....
How can I get Windows 8 to recognize my secondary HD? It is a WD Green 500GB SATA drive. My bios reads it, but Windows 8 does not.
View 3 Replies View RelatedI had to reinstall windows. I had a raid 0 with 2 drives, when I started widows the drive couldn't be accessed. so the only option was to convert to dynamic disk. I did that but still cant read or change drive letters. I am pretty sure my data is still on it. but how can I read this disk?
right now I am scanning it with easeUS data recovery and it looks like its finding files. any other way to read the drive?
raid was made with the bios
When startup pc (black screen) massage displayed" Please insert correct disk" message exact forgot. Next a few second this is massage displayed:"Please floppy disk insert to drive A" again massage exact forgot.
Will be updated via USB BIOS . What should I do to prepare a USB?
The program Acronis True Image failed when attempting to clone win 8.1 C drive. The destination disk is now hidden in File Explorer but is present in Disk Management (and in Device Manager). The Disk Management command "Change Drive Letter ..." is grayed out. How can I unhide the drive?
The drive in question appears in attached screen shots as Disk 6 but is missing from Explorer.
My ssd broke so I went got a new one today I do a fresh install of win 8 but its showing up as removable disk .
My PC specs-sabertooth fx990 r2.0 mb. Windows 8 ...
Over the last couple days, I built a new PC and installed windows 8.1. Initially I had some issues installing windows, so I unplugged all my drives except the SSD and DVD. I installed windows to my SSD.
Everything works great!
Now I started adding my drives back in 1 at a time. When I plugged my 2nd SSD in, it showed up in BIOS, but not in Disk Management or Device Manager. So I booted back into the install CD, it showed up in the disk manager there. Since this was also a blank SSD, I partitioned and formated the drive from the install CD, then exited the installer and booted back to my windows drive.
I have 2 SSD drives working great!
Now to add my 2TB HDD... Same issue, it shows up in BIOS and the install disc, but not in Disk Management or Device Manager. This drive does not have a boot partition on it, however, it does have two existing data partitions. They were made from my previous windows 7 system and the option to delete these partitions is grayed out in the install disc menu. I also have some data that I would like to keep on it. I have a USB dock that I can use to read the contents of the disk just fine. Everything is there and in working order.
What is different about Windows 8.1 that is preventing my hard drives from showing up in windows proper? I am reading things about UEFI online, but nothing seems to fit my exact scenario. I will try and post some screen shots when I get back at it.
System:
Mobo- Asrock Fatal1ty Killer z87
CPU- i3 4330
GPU- Gigabyte 660 OC
SSDs - Kingston V300 120GB
Windows 8.1 64bit
I have bought a new PC/Server to be used as a media server, I have 2 x 2TB disks installed which I believe I have mirrored.
See below screenshot.
From the reading and research I have done I don't believe if one disk was to fail the other one would work, I think I may need to mirror the EFI system Partition and Recovery Partition of which I'm not too sure how to do this?
I've recently installed Windows 8 on an Asus X201E. There is an audible constant disk trashing, although the HDD LED doesn't blink & the Performance monitor in the task manager also doesn't indicate any excessive disk access (literally 0% when nothing is going on). What could cause this? Besides the annoying sound, I'm worried about the disk wearing out.
View 9 Replies View RelatedThere is 3 hdd's installed to my rig:
1 is 55gb kingston ssd where i run my windows
2 is 1tb hitachi where i keep my games and other junk
3 is seagates 250gb laptop hdd.
The main problem was that sometimes when opening or just clicking some folders freezes the file explorer and it crashes after it, so i tought to format the second hdd to make it work better now it seems work ok except for moving files from hdd to another.
When copying the copy speed just at random point drops to 0% and leaves the hdd 3 to hang 100% and the hdd 2 is dropping to 0%.
What i have tried:
I ran hdd regenerator and 18 bad sectors were fixed Also tried to change sata ports That's not much but can't figure anythin else for now and i am starting to suspect that my hdd is gone bad :/ also when downloading ~100mb file from internet it makes same thing but i don't know is it same problem...