I have a pc with 4 drives. And I got a new job, working from home and i wanted to make one of the drives just for work. It was one that i had windows 7 one and no longer used after i bought an ssd an put windows 8 on it. I am really liking 8 and so I put 8 on the second drive that had windows 7 on it.
It all worked fine, but when i tried to have two windows 8 drives on the same pc it made the drives unbootable. I had to re install windows on both drives again. I did some reading and i think its the fast boot feature of windows 8 that's causing the issue. I disabled fast boot on both hard drives. And before I plug them both in at the same time. I want to make sure that im not going to loos all my data again.
Computer: Dell Inspiron 530 Operating System: Windows Vista home prem. upgraded to Windows 8 home Pro. 32 bit. BIOS Rev. 1.0.15 Hard drives: (# 1) Samsung 500 Gig with 2 partitions. (# 2) WD 500 Gig with 2 partitions. Clone of #1 Ram: 3 Gig
Problem: On start up with either drive, the system goes to a blue screen with a clock (different time zone) on pushing Ctrl + Alt + Delete a log in prompt comes on. After logging in a window with the circling dots and Preparing Windows comes on That stays on for about 4 minutes and then a black screen comes on. Pushing the power button will cause Shutting Down to appear breifly and then the machine shuts down. I have a backup of Drive #1 on an external drive.
Recently upgraded to Windows OS 8.1 Pro and cannot encrypt my HP external hard drive. Encryption pauses and states that disk has errors and please run chkdsk. Ran chkdsk and no errors found. Had no difficulty encrypting the C drive with the OS.
Just bought a HDD on amazon and I was wondering if it comes with an SATA cable. It didnt say it did, nor did it say it didnt include one. If not, where could I buy one?
I purchased an Acer laptop from EBay. It was listed as a refurbished unit. However it looks like it was a complete system wipe and OS replacement. There are no Acer hardware drivers installed and no Acer applications available. My real problem is that the computer has been set up with two hard drives visible in "Computer" a (C drive and "New Volume (D. I believe that when this computer was "refurbished" the installer improperly assigned the drives. In disk management the drives are labeled Disk 0: System reserved 350 MB and New Volume (D 297.75 GB. Disk 1: (C 18.64GB. The C: drive is completely full, with the OS however, it is also the default drive meaning that everything tries to install to that drive, but can't. I want to move the (C drive to the New Volume (D drive or merge the two drives together. Is there a way to perform this task so that the computer will boot up into Windows 8.
Is it possible to have two hard drives in the computer and to be able to choose which one to start with ?
I have in mind that one hard drive has all my normal programs and the other is used for Flight simulation program.
Both hard drives would have win 8 installed. If I could use one hard drive and partition it so the flight sim is on a separate partition. However, for two reasons I wouldn't want this as the flight sim with scenery requires a lot of Gigs. and secondly I believe that it would run faster on its own hard drive.
So. Is it possible to set up the computer to decide which Drive I wish to start ? and if so, how to set it up ?
I have a Toshiba Satellite P855. it has an i5 processor, 8 gig of RAM, 64 bit os. running windows 8. 3 USB ports. Im not sure if they are all usb2. MY problem is that i can't connect any of my external hard drives to my laptop. When I plug them in to my desktop running windows xp, and my other laptop running windows 7, everything is fine, but my laptop running windows 8 doesn't even recognize that anything is plugged in to my usb ports. I have a lot of files, pictures music, and video files that i would like to have easy access to on my new laptop.
I read the tutorial on removing the Windows password requirement. I changed the settings per the example, everything seemed ok, I restarted and it logged me in as expected, but then it took me to the desktop and opened up all of my external hard drives. I then changed the setting back to requiring a password and still the same result. I have restarted several times and still the same condition.
I was trying to install elementary OS alongside Windows but when the installation was finishing it crashed. When I went back to Windows my hard drive didn't appear and now it says in Manage>Storage>Disk Management Disk 1 Dynamic - Invalid i posted a picture of this.I tried with Ubuntu then on the other disk same thing happened. Is there a way to get them back to normal without losing the data?
I am currently running Windows 8 64 bit and when I go to "My Computer" it is only showing my C: drive. I know my other drives (internal, external and dvd) are working because I can enter the directory name (ie. H: or E:) into the address bar and the content appears. Is there any way to fix this problem so that they show up in "My Computer"?
Just purchase this HornetTek X2-U3 JBOD USB 3.0 (HT-3210U3) - 3.5" DUAL BAY - JBOD - HDD ENCLOSURES
The only reason was because I had a spare 1TB drive and 500GB drive that I wanted to span into one volume, according the product spec it supports JBOD, which from my understanding should allow hard drive spanning, I understand that if one drive goes the data is lost, but that is not a concern of mine as I have numerous backups of my data. The problem is when I try to span 2 disk I get the following error "The operation is not supported by the object"
I have Win 7 on a 60gb ssd hard drive. I would like to put another 60gb ssd drive in my computer and run win 8 off of this. Is it possible to run this as a dual boot system. Will I get the option to boot into either when I boot up.
Currently I have a machine with Windows 8 pre-installed already. But now I don't like Windows 8 as much because certain programs I want to use requires Windows 7. Though I would still like to keep Windows 8 because it's licensed. I have an extra hard drive lying around with Windows 7 loaded in it already. Now I would like to dual boot between these two drives. Do I have to turn off Secure Boot and change the boot orders around to boot the Windows 7 hard drive?
I used four drives in my hard-disk. I needed to extend volume for my C drive. So using the Disk management utility I was trying to shrink the drive F (as it was very next to C, as in Disk management). But something happen accidental here. I found that two of my drives E & F went missing after the operation. Also my laptop suddenly restarted (after perform a checking task). I am not sure how this happened and looking for a way to recover the lost partitions as they are seen still exist, including the data.
I was only trying to shrink around 283 mb of volume from a drive with 138 gb, as an experiment basis, to see it work. On that process the drives were lost and those are not shown into my windows now. Using a software EaseUS Partition Master, I could still see the drives still exist as they contain the data as used spaces, and also show the unallocated space of 283 mb but I am not finding a way how could I recover my partition without affecting the data.
I have an ASUS RT-AC68U router with 9 DBI dual band antennas. I need a program that allows me to copy and paste files to the external hard drives which are connected to the router's USB ports. An example of the application I am seeking is called "Silex Virtual Link", I need one like this, I used to use this 1 on my old D-Link DIR-825 router but it is not working with my new ASUS router and ASUS tech support couldn't solve anything.
I am trying to find a definitive answer to the question of mapping external hard drives. I have 4 external hard drives and would like to know if there is benefit in mapping them or not. Is there benefit in speed/response etc.... I do a lot of video streaming through media centre to xbox 360.
I have a system that froze and I have been struggling with for days. Long story short, Lenovo Twist with solid state hard drive and no optical disc drive. I woke up last week and had a black screen. So I rebooted and went through the steps to recover (not 12 after a couple of days of free time I had to force the recovery with f10 and then I could only get the reset windows option to come up wanting me to insert my recovery media.
I don't have any. Windows 8 was preinstalled so I don't have the key. Yes it was visible on the system but that's not an option now and without a optical disc I couldn't burn a recovery disc.
After arguing with Lenovo, Staples, and Microsoft about warranties etc. I want to just get my system running. I want to buy windows 8 and install from a stick or external optical drive right? I cannot just download to the stick and insert into a usb slot. I cannot restore from a factory (Microsoft) CD if I bought the external drive.
I've tried everything. Basically it wont boot when using a USB 3.0 flash drive (which is faster than the external usb 3 hard drive am using) It simply stalls on the boot image part (The blue windows icon). And on my laptop it gives a blue screen type error. Yet wont let me boot into safe mode when using flash drive. However when I use external drive it works fine although the performance isn't great.
At first I though it could have been an issue with the boot/350mb partition so I copied that over. Still the same. I have also tried a fresh windows to go install with same results.
USB Stick: Patriot USB 3 45MB Write/160MB Read USB HDD: External Case (USB3) With Toshiba 7200 Laptop Drive (ASMT 2105)
I have a RAID 0 array consisting of 4x WD Black. Windows lists the array as an SSD in the optimize/defragmenter UI. Both 'Analyze' and 'Optimize' are greyed out and therefore I cannot defragment the array.
For the record I have the latest BIOS for my motherboard (which is an Asus Rampage IV Extreme), latest Intel RST and Windows 8.1 fully updated.
I've been trying to install windows 8 , but it says "No drives Found " . I tried to find out some solution from net , and tried the method of using cmd ( diskpart , listdisk ) but only one drive of cdrom is shown using cmd.
How to solve it , other than cmd , as it is showing one drive that is of cd-rom . I'm using hp probook 4540s . . .
I did an upgrade (admittedly, too lazy to want to reinstall all my programs) from 7 ultimate to 8 Pro (both x64) and now only one of my DVD-RW drives shows up in computer or device manager, and scanning for hardware doesn't work. The drive does show in the BIOS however.
I just bought this Dell XPS 8500 with Win 8 on it and although I'm not that happy with this OS I guess there is a learning curve so I'll try for awhile.
For some reason, after I had uninstalled Mcafee from the start up screen and also added a few items to the startup screen, when I reboot or do a cold boot, instead of getting the startup screen, I am getting the desktop along with about 5 disk partitions and a couple programs that I installed. While this is not bad since I can just "x" out of them, it's irritating and wonder how I can fix this. I would like to ultimately just boot up to the desktop if possible without anything else opening up.
I have a Sony Vaio all in one but it doesn't have a cd drive. I've purchased two and neither were recognized by Windows 8. Can found a USB optical drive recommended?
This is what Windows Explorer and Disk Management show.
Drives G, H, I, and L are completely non-existent. When clicking on them, Windows asks to format them. Properties shows 0 bytes Used space/Free space. I need removing these "drives" from Windows Explorer.
I currently have a machine installed with Windows 8 pro 64 bit installed on one Samsung 840 pro SSD. Works great. I recently added a second Crucial m4 SSD and would like to install Linux on it... I am having major issues doing so mainly because of UEFI... and when installing Linux it does not see Windows 8 installed on any drive therefore making it rather difficult to install both OSes.
My five year old HP Pavilion crashed with virtually no signs of life, although the 2 320GB drives are only 8 months old, and are spinning when startup is attempted. No messages of any kind on the display; I checked the display and it is good. Bought a new HP, but it has Windows 8.
All my backup data is via Norton Ghost 15/Windows 7 and is intact on a 1 TB external Passport drive. I need to figure out how to retrieve this data.
A suggestion was made to just install the old Win 7 hard drive in place of the Win 8 hard drive in the new computer. New computer can't accommodate both old Win 7 hard drives, so I stuck the C: in, it per normal containing the startup and OS files. The computer would not boot from this drive, and delivered an error message to the effect "No bootable disk or drive has failed."
So the question is would there be anything in the BIOS of the new PC which would make it expect to see Win 8?? why it wouldn't boot from this drive? I realize the drive could be bad, but given the age of the drive, it seems unlikely...
I had a Seagate MyBackup 1TB external drive. When it was half full I decided to buy another one, the same Seagate, same model, same 1TB.
So I copied the files to the new one and I do backups every week or so for the changes.
Today I noticed that the old one uses 70GB more than the other.
I mean, 70GB is a lot. I checked the files carefully, it's all my movies. Both are the same capacity, 931 GB. Even same color. The only difference I found is that the newest has 16MB buffer and the old one only 8MB.
Just in case it is relevant, I first used a program called Cobian Backup to make incremental backups and so on, but it was a mess and I uninstalled, formatted the new one and copied the files directly.Maybe Cobian took 70GB of drive #1 and they are now lost in nowhere? I don't detect hidden files, hidden partitions, etc.
I'm running windows 8.1 x64. When I insert a usb flash drive into my PC, it takes maybe over 2 minutes before windows "finds" it and has it appear in windows explorer. I have the latest BIOS for my motherboard and I don't think there are any specific usb drivers to install.
