I read the tutorial on removing the Windows password requirement. I changed the settings per the example, everything seemed ok, I restarted and it logged me in as expected, but then it took me to the desktop and opened up all of my external hard drives. I then changed the setting back to requiring a password and still the same result. I have restarted several times and still the same condition.
View 1 RepliesI have a Toshiba Satellite P855. it has an i5 processor, 8 gig of RAM, 64 bit os. running windows 8. 3 USB ports. Im not sure if they are all usb2. MY problem is that i can't connect any of my external hard drives to my laptop. When I plug them in to my desktop running windows xp, and my other laptop running windows 7, everything is fine, but my laptop running windows 8 doesn't even recognize that anything is plugged in to my usb ports. I have a lot of files, pictures music, and video files that i would like to have easy access to on my new laptop.
View 6 Replies View RelatedJust purchase this HornetTek X2-U3 JBOD USB 3.0 (HT-3210U3) - 3.5" DUAL BAY - JBOD - HDD ENCLOSURES
The only reason was because I had a spare 1TB drive and 500GB drive that I wanted to span into one volume, according the product spec it supports JBOD, which from my understanding should allow hard drive spanning, I understand that if one drive goes the data is lost, but that is not a concern of mine as I have numerous backups of my data. The problem is when I try to span 2 disk I get the following error "The operation is not supported by the object"
Here's a screenshot of the drives in question :
Recently upgraded to Windows OS 8.1 Pro and cannot encrypt my HP external hard drive. Encryption pauses and states that disk has errors and please run chkdsk. Ran chkdsk and no errors found. Had no difficulty encrypting the C drive with the OS.
View 5 Replies View RelatedI have an ASUS RT-AC68U router with 9 DBI dual band antennas. I need a program that allows me to copy and paste files to the external hard drives which are connected to the router's USB ports. An example of the application I am seeking is called "Silex Virtual Link", I need one like this, I used to use this 1 on my old D-Link DIR-825 router but it is not working with my new ASUS router and ASUS tech support couldn't solve anything.
View 2 Replies View RelatedI am trying to find a definitive answer to the question of mapping external hard drives. I have 4 external hard drives and would like to know if there is benefit in mapping them or not. Is there benefit in speed/response etc.... I do a lot of video streaming through media centre to xbox 360.
View 2 Replies View RelatedI have a pc with 4 drives. And I got a new job, working from home and i wanted to make one of the drives just for work. It was one that i had windows 7 one and no longer used after i bought an ssd an put windows 8 on it. I am really liking 8 and so I put 8 on the second drive that had windows 7 on it.
It all worked fine, but when i tried to have two windows 8 drives on the same pc it made the drives unbootable. I had to re install windows on both drives again. I did some reading and i think its the fast boot feature of windows 8 that's causing the issue. I disabled fast boot on both hard drives. And before I plug them both in at the same time. I want to make sure that im not going to loos all my data again.
I have a portable HDD that keeps opening on startup, how can i change that from happening?
View 3 Replies View RelatedI have a Sony Vaio all in one but it doesn't have a cd drive. I've purchased two and neither were recognized by Windows 8. Can found a USB optical drive recommended?
[URL]
Just bought a HDD on amazon and I was wondering if it comes with an SATA cable. It didnt say it did, nor did it say it didnt include one. If not, where could I buy one?
View 4 Replies View RelatedI purchased an Acer laptop from EBay. It was listed as a refurbished unit. However it looks like it was a complete system wipe and OS replacement. There are no Acer hardware drivers installed and no Acer applications available. My real problem is that the computer has been set up with two hard drives visible in "Computer" a (C drive and "New Volume (D. I believe that when this computer was "refurbished" the installer improperly assigned the drives. In disk management the drives are labeled Disk 0: System reserved 350 MB and New Volume (D 297.75 GB. Disk 1: (C 18.64GB. The C: drive is completely full, with the OS however, it is also the default drive meaning that everything tries to install to that drive, but can't. I want to move the (C drive to the New Volume (D drive or merge the two drives together. Is there a way to perform this task so that the computer will boot up into Windows 8.
View 9 Replies View RelatedComputer: Dell Inspiron 530
Operating System: Windows Vista home prem. upgraded to Windows 8 home Pro. 32 bit.
BIOS Rev. 1.0.15
Hard drives: (# 1) Samsung 500 Gig with 2 partitions. (# 2) WD 500 Gig with 2 partitions. Clone of #1
Ram: 3 Gig
Problem: On start up with either drive, the system goes to a blue screen with a clock (different time zone) on pushing Ctrl + Alt + Delete a log in prompt comes on. After logging in a window with the circling dots and Preparing Windows comes on That stays on for about 4 minutes and then a black screen comes on. Pushing the power button will cause Shutting Down to appear breifly and then the machine shuts down. I have a backup of Drive #1 on an external drive.
Is it possible to have two hard drives in the computer and to be able to choose which one to start with ?
I have in mind that one hard drive has all my normal programs and the other is used for Flight simulation program.
Both hard drives would have win 8 installed. If I could use one hard drive and partition it so the flight sim is on a separate partition. However, for two reasons I wouldn't want this as the flight sim with scenery requires a lot of Gigs. and secondly I believe that it would run faster on its own hard drive.
So. Is it possible to set up the computer to decide which Drive I wish to start ? and if so, how to set it up ?
I was trying to install elementary OS alongside Windows but when the installation was finishing it crashed. When I went back to Windows my hard drive didn't appear and now it says in Manage>Storage>Disk Management Disk 1 Dynamic - Invalid i posted a picture of this.I tried with Ubuntu then on the other disk same thing happened. Is there a way to get them back to normal without losing the data?
View 9 Replies View RelatedWhen I try to boot to Win 7, I get the logo and then a black screen. I have tried all the repairs and nothing works. Win 8.1 is fine.
View 9 Replies View RelatedI am currently running Windows 8 64 bit and when I go to "My Computer" it is only showing my C: drive. I know my other drives (internal, external and dvd) are working because I can enter the directory name (ie. H: or E:) into the address bar and the content appears. Is there any way to fix this problem so that they show up in "My Computer"?
View 9 Replies View RelatedI have Win 7 on a 60gb ssd hard drive. I would like to put another 60gb ssd drive in my computer and run win 8 off of this. Is it possible to run this as a dual boot system. Will I get the option to boot into either when I boot up.
View 4 Replies View RelatedCurrently I have a machine with Windows 8 pre-installed already. But now I don't like Windows 8 as much because certain programs I want to use requires Windows 7. Though I would still like to keep Windows 8 because it's licensed. I have an extra hard drive lying around with Windows 7 loaded in it already. Now I would like to dual boot between these two drives. Do I have to turn off Secure Boot and change the boot orders around to boot the Windows 7 hard drive?
View 4 Replies View RelatedIs there a tool for slowwing opening application in taskbar when the pc starts?
When I start my laptop, first comes the Anti virus, and after 1 of 2 minutes then Google Drives load etc, etc
I used four drives in my hard-disk. I needed to extend volume for my C drive. So using the Disk management utility I was trying to shrink the drive F (as it was very next to C, as in Disk management). But something happen accidental here. I found that two of my drives E & F went missing after the operation. Also my laptop suddenly restarted (after perform a checking task). I am not sure how this happened and looking for a way to recover the lost partitions as they are seen still exist, including the data.
I was only trying to shrink around 283 mb of volume from a drive with 138 gb, as an experiment basis, to see it work. On that process the drives were lost and those are not shown into my windows now. Using a software EaseUS Partition Master, I could still see the drives still exist as they contain the data as used spaces, and also show the unallocated space of 283 mb but I am not finding a way how could I recover my partition without affecting the data.
A few months ago my laptop broke and it needed repairs. The HDD was replaced and i got my laptop back with one new HDD inside and one "broke" HDD in a bag. Later the "Repaired" Laptop crashed again so i bought a new one and took the HDD out of the old laptop. I bought a HDD case with USB connection and both of the HDD's where intact. The oldest HDD contained windows 7 and the replaced contained windows 8. Now i want to sell the Windows 8 HDD so i want it to be clean of personal files but i want it to keep windows 8. I thought the solution was to run the windows 8 on the HDD so i can use the program deletation program of that windows 8. The problem is i dont know how to run windows 8 of a hard drive. I have searched the internet but with no success.
View 3 Replies View RelatedI have two USB 3.0 ports on the front of my Dell XPS 8500 Dell desktop. Once again I have caused the USB 3.0 eXtensible Host Controller to stop working because I did not disconnect the external hard drive before shutting down, it seems. It reminds me of leaving in a floppy drive but at least the computer would not boot in that circumstance. Now, there is no warning whatsoever. Dell technical support's answer is to refresh or reset the machine.
Any way that would be less time-consuming than having to reinstall all of my applications.
I have an external hard drive connected to my PC via hard drive dock on USB 3.0 port. Whenever I turn my PC on with the hard drive connected, my PC won't boot up because it is trying to boot up from the external hd where I have an image of both my Win 7 & Win 8 OS. How can I stop my PC from booting up from the external hd?
View 9 Replies View RelatedMy wife just got a new PC running Windows 8.1 Pro and she wants to re-connect her external hard drive that has all her game files on it to the new PC.
While the new PC recognizes the drive it states that it needs to be initialized , doing so would wipe the data currently on the drive which would be unacceptable. How to get the new PC to recognize this drive and its data?
My old Sony Vaio broke the other day, so I've just got a new laptop. The Vaio was Vista, but now I'm on Windows 8.
I'd been backing up my Vaio to an external harddrive, but all I ever did was run the backup and let it get on with it. So for example, within the external harddrive now it just has a list of the dates I ran a backup, followed by 'Backup files 1', 'Backup files 2' etc. I'm hoping these include some of the documents/files I had on there, but I can't be sure. What exactly will have been backed up here?
I've been trying now to restore these files on my new laptop, but I can't seem to find a way. Is it possible?
OS: Windows 8.1 Pro x86 WMC
External Hard Drive: Seagate FreeAgent GoFlex (No external Power Required)
Problem: I can't access my External Hard Drive.
See The Screenshot Below.
Solution Applied:
Drive letter changed. (Not Worked)
Also tried Properties - Security - Advanced - Owner to Everyone. (Not Worked)
Checked the HDD in another PC Windows 8.1 x64. (Not Worked)
I connected the HDD then I installed the "Better-Explorer" through that i can access my external hdd normally but If I Reboot my PC then same Problem with the "Better-Explorer". & If I install The "Better-Explorer" Then if I connect my HDD Then from the beginning i can't access the HDD.
In Tune-Up Utilities Their is Disk Explorer through that I can explore my Ex HDD Drive. I right clicked on my drive from Tune-up & checked the disk for error and then repaired it (Windows Error checking tool) and then reboot my PC but it is still the same.
I have a external had disk i want to share it on wifi. and want to access it from my laptop and my tv with usb port.
View 2 Replies View RelatedI successfully managed to create a virtual hard drive on my external drive to try boot windows 8 off it. I managed to boot it up and the login screen also appears as normal. I have a successful login, But on the second time login I am faced with black screen and the cursor. I'm aware that Microsoft has released a fix for this. I have attached the executable in the zip. I tried running this fix but it didn't work . After the black screen appears, even in safe mode I cannot run explorer.exe or open any folder to try running any executable files
View 2 Replies View RelatedI just installed Win 8 last night and everything seemed fine before I turned off the computer. Now, I'm a student and I work a lot from my USB/HD. I have both my usb and HD connected to the computer but the computer doesn't read them now.
View 8 Replies View RelatedI just installed Windows 8. I used to have Vista. With Vista I could connect my Seagate external hard drive and then find the Backup function and create a backup. How would I do this with Windows 8?
View 3 Replies View RelatedMy portable hard drive stops showing up all of a sudden. It is connected to a USB hub. When I go to 'Disk Management' in 'Computer Management', the hard drive shows up as Unknown - Not Initialised. Also this hard drive works while not using the USB hub, and the USB hub works as well with other devices.
View 9 Replies View Related