Do Hard Drives Come With SATA Cable
Jun 20, 2013Just bought a HDD on amazon and I was wondering if it comes with an SATA cable. It didnt say it did, nor did it say it didnt include one. If not, where could I buy one?
View 4 RepliesJust bought a HDD on amazon and I was wondering if it comes with an SATA cable. It didnt say it did, nor did it say it didnt include one. If not, where could I buy one?
View 4 RepliesI did an upgrade (admittedly, too lazy to want to reinstall all my programs) from 7 ultimate to 8 Pro (both x64) and now only one of my DVD-RW drives shows up in computer or device manager, and scanning for hardware doesn't work. The drive does show in the BIOS however.
View 9 Replies View RelatedI was wondering is there any way to increase the data transfer rate on SATA drives. My MB has SATA 3 and I have a Samsung HD 154UI drive on SATA /300 where I have Windows 8 x64 installed. The performance under Windows is 5.9. This is the lowest on the list. CPU 7.4, Memory 7.4, Graphics 7.9, Gaming graphics 7.9, Hard disk 5.9...Is there a way to get it higher without replacing the drive. The drive is new (only 3 months old) I have two of these drives and two Seagate drives that are 2 tera which are 1 year old.
View 9 Replies View RelatedThere was a registry fix for this problem as here:
How can I remove the option to eject SATA drives from the Windows 7 tray icon? - Super User
In Windows 8, though, the registry is different, as there is no msahci under services as here:
HKEY_LOCAL_MACHINESYSTEMCurrentControlSetservicesmsahci
How do I slave a hard drive on my Windows 8 Computer?
I had the hard drive slaved to my xp and it was fine, I plug it in to Windows 8 and it doesn't recognize it. Plug it back into the XP and it shows up fine. I'm not really experienced with this, I'm used to just hooking the hard drive up and booting up with XPs and it knows there's another HD available for storage, is the process different with windows 8? is there something specific I need to do to get it to recognize the HD?
I have a pc with 4 drives. And I got a new job, working from home and i wanted to make one of the drives just for work. It was one that i had windows 7 one and no longer used after i bought an ssd an put windows 8 on it. I am really liking 8 and so I put 8 on the second drive that had windows 7 on it.
It all worked fine, but when i tried to have two windows 8 drives on the same pc it made the drives unbootable. I had to re install windows on both drives again. I did some reading and i think its the fast boot feature of windows 8 that's causing the issue. I disabled fast boot on both hard drives. And before I plug them both in at the same time. I want to make sure that im not going to loos all my data again.
I purchased an Acer laptop from EBay. It was listed as a refurbished unit. However it looks like it was a complete system wipe and OS replacement. There are no Acer hardware drivers installed and no Acer applications available. My real problem is that the computer has been set up with two hard drives visible in "Computer" a (C drive and "New Volume (D. I believe that when this computer was "refurbished" the installer improperly assigned the drives. In disk management the drives are labeled Disk 0: System reserved 350 MB and New Volume (D 297.75 GB. Disk 1: (C 18.64GB. The C: drive is completely full, with the OS however, it is also the default drive meaning that everything tries to install to that drive, but can't. I want to move the (C drive to the New Volume (D drive or merge the two drives together. Is there a way to perform this task so that the computer will boot up into Windows 8.
View 9 Replies View RelatedComputer: Dell Inspiron 530
Operating System: Windows Vista home prem. upgraded to Windows 8 home Pro. 32 bit.
BIOS Rev. 1.0.15
Hard drives: (# 1) Samsung 500 Gig with 2 partitions. (# 2) WD 500 Gig with 2 partitions. Clone of #1
Ram: 3 Gig
Problem: On start up with either drive, the system goes to a blue screen with a clock (different time zone) on pushing Ctrl + Alt + Delete a log in prompt comes on. After logging in a window with the circling dots and Preparing Windows comes on That stays on for about 4 minutes and then a black screen comes on. Pushing the power button will cause Shutting Down to appear breifly and then the machine shuts down. I have a backup of Drive #1 on an external drive.
Is it possible to have two hard drives in the computer and to be able to choose which one to start with ?
I have in mind that one hard drive has all my normal programs and the other is used for Flight simulation program.
Both hard drives would have win 8 installed. If I could use one hard drive and partition it so the flight sim is on a separate partition. However, for two reasons I wouldn't want this as the flight sim with scenery requires a lot of Gigs. and secondly I believe that it would run faster on its own hard drive.
So. Is it possible to set up the computer to decide which Drive I wish to start ? and if so, how to set it up ?
I have a Toshiba Satellite P855. it has an i5 processor, 8 gig of RAM, 64 bit os. running windows 8. 3 USB ports. Im not sure if they are all usb2. MY problem is that i can't connect any of my external hard drives to my laptop. When I plug them in to my desktop running windows xp, and my other laptop running windows 7, everything is fine, but my laptop running windows 8 doesn't even recognize that anything is plugged in to my usb ports. I have a lot of files, pictures music, and video files that i would like to have easy access to on my new laptop.
View 6 Replies View RelatedI read the tutorial on removing the Windows password requirement. I changed the settings per the example, everything seemed ok, I restarted and it logged me in as expected, but then it took me to the desktop and opened up all of my external hard drives. I then changed the setting back to requiring a password and still the same result. I have restarted several times and still the same condition.
View 1 Replies View RelatedI was trying to install elementary OS alongside Windows but when the installation was finishing it crashed. When I went back to Windows my hard drive didn't appear and now it says in Manage>Storage>Disk Management Disk 1 Dynamic - Invalid i posted a picture of this.I tried with Ubuntu then on the other disk same thing happened. Is there a way to get them back to normal without losing the data?
View 9 Replies View RelatedWhen I try to boot to Win 7, I get the logo and then a black screen. I have tried all the repairs and nothing works. Win 8.1 is fine.
View 9 Replies View RelatedI am currently running Windows 8 64 bit and when I go to "My Computer" it is only showing my C: drive. I know my other drives (internal, external and dvd) are working because I can enter the directory name (ie. H: or E:) into the address bar and the content appears. Is there any way to fix this problem so that they show up in "My Computer"?
View 9 Replies View RelatedJust purchase this HornetTek X2-U3 JBOD USB 3.0 (HT-3210U3) - 3.5" DUAL BAY - JBOD - HDD ENCLOSURES
The only reason was because I had a spare 1TB drive and 500GB drive that I wanted to span into one volume, according the product spec it supports JBOD, which from my understanding should allow hard drive spanning, I understand that if one drive goes the data is lost, but that is not a concern of mine as I have numerous backups of my data. The problem is when I try to span 2 disk I get the following error "The operation is not supported by the object"
Here's a screenshot of the drives in question :
I have Win 7 on a 60gb ssd hard drive. I would like to put another 60gb ssd drive in my computer and run win 8 off of this. Is it possible to run this as a dual boot system. Will I get the option to boot into either when I boot up.
View 4 Replies View RelatedCurrently I have a machine with Windows 8 pre-installed already. But now I don't like Windows 8 as much because certain programs I want to use requires Windows 7. Though I would still like to keep Windows 8 because it's licensed. I have an extra hard drive lying around with Windows 7 loaded in it already. Now I would like to dual boot between these two drives. Do I have to turn off Secure Boot and change the boot orders around to boot the Windows 7 hard drive?
View 4 Replies View RelatedRecently upgraded to Windows OS 8.1 Pro and cannot encrypt my HP external hard drive. Encryption pauses and states that disk has errors and please run chkdsk. Ran chkdsk and no errors found. Had no difficulty encrypting the C drive with the OS.
View 5 Replies View RelatedI used four drives in my hard-disk. I needed to extend volume for my C drive. So using the Disk management utility I was trying to shrink the drive F (as it was very next to C, as in Disk management). But something happen accidental here. I found that two of my drives E & F went missing after the operation. Also my laptop suddenly restarted (after perform a checking task). I am not sure how this happened and looking for a way to recover the lost partitions as they are seen still exist, including the data.
I was only trying to shrink around 283 mb of volume from a drive with 138 gb, as an experiment basis, to see it work. On that process the drives were lost and those are not shown into my windows now. Using a software EaseUS Partition Master, I could still see the drives still exist as they contain the data as used spaces, and also show the unallocated space of 283 mb but I am not finding a way how could I recover my partition without affecting the data.
I have an ASUS RT-AC68U router with 9 DBI dual band antennas. I need a program that allows me to copy and paste files to the external hard drives which are connected to the router's USB ports. An example of the application I am seeking is called "Silex Virtual Link", I need one like this, I used to use this 1 on my old D-Link DIR-825 router but it is not working with my new ASUS router and ASUS tech support couldn't solve anything.
View 2 Replies View RelatedI am trying to find a definitive answer to the question of mapping external hard drives. I have 4 external hard drives and would like to know if there is benefit in mapping them or not. Is there benefit in speed/response etc.... I do a lot of video streaming through media centre to xbox 360.
View 2 Replies View RelatedBasic Specs
Brand New Toshiba Satellite C855
Win 8 64-bit
6 GB RAM
Display Adapter: Intel(R) HD Graphics (2000)
Driver: Intel 9.17.10.3040
Playback Devices
Show Disabled Devices - checked
Show Disconnected Devices - checked
High Def Audio Device displays as not plugged in
Cable is plugged inCable has been tested on backup laptopCable connected to HDTVVideo is fineNo Audio
I have spent hours installing and uninstalling drivers from the Toshiba and Intel sites. Tech support said to return it but I have just spent 2 days installing software. I never took a break to watch Netflix.
After 5 years of use, my college laptop (Windows Vista) finally gave up on me a couple of months ago. Each time at start up, it would automatically go to the blue screen of death and never get past that point. I wound up getting a new laptop (ASUS S500CA) operating on windows 8, and now I'm attempting to recover some of my files from the old hard drive. After a little reading, I discovered that you can pull the old drive, connect it to another computer via a USB cable, and attempt to recover the data on the drive. So I ran down to the local best buy and picked up an Apricorn SATA Wire. Here's the problem. Every time I hook the hard drive up to the computer via the USB wire, my computer instantly goes to a blue screen and goes into a cycle of restarting itself over and over. Does this mean that my old hard drive is just too far gone to recover, or is there another method that I can try?
View 2 Replies View RelatedI just bought a new laptop with windows 8 single language and i want to transfer my videos but it stuck i don't know what is the problem ...
View 3 Replies View RelatedI had one sata drive wanted to add second sata as data drive.i disconnected older hard drive connected new one,installed windows 8 on it,everything went fine.I did not format older drive yet,reconnected it afterwards,changed boot order in BIOS but the second sata drive reads bus number 0,one with operating system reads bus number 1.Is this O.K.?Usually bus number 0 should be the operating system is on.How can I change this?
View 9 Replies View RelatedMy hdd sata hitachi htb-tt7sab320, hitachi is locked , and need master or user password.....
View 6 Replies View RelatedI've got an old 750 GB HDD (SATA) which will be fine for file serving (multi-media). It's got the standard SATA connectors (both the small one (data) and the power connector but it's ALSO got the 4 pin power connectors that you get with older IDE drives (Molex ??)
Do I need to connect BOTH power sockets or just ignore the older 4-pin IDE type connector.
Not sure why they needed BOTH power connectors -- maybe this drive might have been used also for making external HDD's at one time.
I'm minded just to connect the two SATA cables and ignore the other one.
I have 3 disks in my computer, of which 2 are SSDs.
I swapped the SATA ports between one SSD and the HDD so as to give the SSD a SATA port with maximum 6gb/s transfer speed, and now the access to the HDD is denied. The drive letters are correct, as they should be.
The user (myself, admin) did not change.
What can be done about it? I already tried to check the ownership of the drive and says STEVECOMPUTER/Administrators, which looks good, as my user account is an admin. Still, I have no access.
My windows 7 computer crashed and I took out the hard drive and placed it in the enclosure. I connected it to my windows 8 computer and it sees the drive, says it is working properly, but everything moves in slow motion. To download some pics back to my other computer it will take 17 hours. I can see my files, but every folder takes a long time to open up. I also made sure all drivers are updated and I have all the windows updates, etc.I also receive a permission notice a lot and I click continue, but that takes forever to change the ownership file by file as well.
View 6 Replies View RelatedAfter 5 years of use, my college laptop (Windows Vista) finally gave up on me a couple of months ago. Each time at start up, it would automatically go to the blue screen of death and never get past that point. I wound up getting a new laptop operating on windows 8, and now I'm attempting to recover some of my files from the old hard drive. After a little reading, I discovered that you can pull the old drive, connect it to another computer via a USB cable, and attempt to recover the data on the drive. So I ran down to the local best buy and picked up an Apricorn SATA Wire. Here's the problem. Every time I hook the hard drive up to the computer via the USB wire, my computer instantly goes to a blue screen and goes into a cycle of restarting itself over and over. Does this mean that my old hard drive is just too far gone to recover, or is there another method that I can try?
View 4 Replies View RelatedWith windows 7 i was able to do this by going to network settings and all of that and had no issues. Now with windows 8 I plug in my cable but it says the device is an unidentified network an I cannot figure out how to alter these settings.
View 3 Replies View Related