Hardware Drivers :: Dynex SATA External HDD Really Slow 700 Kbs
Jan 6, 2013
My windows 7 computer crashed and I took out the hard drive and placed it in the enclosure. I connected it to my windows 8 computer and it sees the drive, says it is working properly, but everything moves in slow motion. To download some pics back to my other computer it will take 17 hours. I can see my files, but every folder takes a long time to open up. I also made sure all drivers are updated and I have all the windows updates, etc.I also receive a permission notice a lot and I click continue, but that takes forever to change the ownership file by file as well.
View 6 Replies
ADVERTISEMENT
Jul 13, 2014
I've got an old 750 GB HDD (SATA) which will be fine for file serving (multi-media). It's got the standard SATA connectors (both the small one (data) and the power connector but it's ALSO got the 4 pin power connectors that you get with older IDE drives (Molex ??)
Do I need to connect BOTH power sockets or just ignore the older 4-pin IDE type connector.
Not sure why they needed BOTH power connectors -- maybe this drive might have been used also for making external HDD's at one time.
I'm minded just to connect the two SATA cables and ignore the other one.
View 3 Replies
View Related
Feb 9, 2014
After 5 years of use, my college laptop (Windows Vista) finally gave up on me a couple of months ago. Each time at start up, it would automatically go to the blue screen of death and never get past that point. I wound up getting a new laptop operating on windows 8, and now I'm attempting to recover some of my files from the old hard drive. After a little reading, I discovered that you can pull the old drive, connect it to another computer via a USB cable, and attempt to recover the data on the drive. So I ran down to the local best buy and picked up an Apricorn SATA Wire. Here's the problem. Every time I hook the hard drive up to the computer via the USB wire, my computer instantly goes to a blue screen and goes into a cycle of restarting itself over and over. Does this mean that my old hard drive is just too far gone to recover, or is there another method that I can try?
View 4 Replies
View Related
Sep 15, 2014
I have a newly home built MSI AM1i motherboard and have it running fine with Windows 8.1. I am trying to expand the number of SATA ports it has (comes with only 2). The mobo has a mini-PCIe card slot.
I purchased a AsMedia 106x, 2-port, mini-PCIe card (had to use a ribbon-cable extender to get it connected).
That all appears to be fine. I struggled a bit with drivers, but eventually found a Windows 7 AsMedia 106x driver set. Loaded that, seems ok.
Problem: When I go to device mgr, it does not see the added 2-ports. When I first boot up, during the black-screen phase, it does report that the AsMedia device is loading and will actually find/name a hard drive that I attach to one of the new ports. It then almost looks like it will load windows, give the nice little blue windows 8 flag and just sits there. I can hear a drive cycle every 2-3 seconds, but nothing.
I eventually have to hit the power button to shut down. If I disconnect the drive added to the new card, it will start up. The AsMedia device looks to load during a black-screen phase, but reports no device found, and then loads Win 8 Correctly. When I get in, again, no SATA ports shown for the new device.
View 3 Replies
View Related
Mar 26, 2014
I am trying to install a graphics card in my desktop pc. The heat sink on the card blocks the SATA port that the DVD drive is plugged into (SATA1) so I've switched the DVD drive to SATA2. The drive is now showing as connected to port2 in the BIOS, but in windows (Windows 8 64-bit) it isn't detecting the DVD drive at all? I've seen other posts about this on the internet suggesting to add a line to the registry, but I've done that and it doesn't solve the problem.
View 9 Replies
View Related
Jul 1, 2014
When I go to Computer Management my main (OS) drive shows as "Disk 1" and my 2nd internal data drive shows as "Disk 0". Should I switch the SATA cables so that the main drive will show as "Disk 0 and the 2nd internal drive as "Disk 1"?
View 5 Replies
View Related
Mar 10, 2013
My Seagate GoFlex 500 isn't showing up in Windows. Disk Management sees it, but there's no feasible option there. It's not a blank drive, so I can't make a new simple volume, only delete it.
I have important data on there. What gives?
View 2 Replies
View Related
May 1, 2013
I have purchased from a local electronics store, an after market HDD drive housing to enable me to use a surplus 450GB IDE hdd from a now defunct computer.
Once assembled I plugged it in ( it comes with its own power pack , and uses a USB cable to connect to the computer)
Windows 8 knows it is there and installed a driver called - USB to IDE bridge. there the problem starts
I am unable to see the drive in explorer or anything . either as a mass storage device or an external drive.
Do I have to register the drive or anything , and if so how - shouldnt Windows 8 do this automatically ?? I have another HDD ( more modern one ) and windows see's that straight away.
View 9 Replies
View Related
Aug 4, 2014
Does making a new drive by shrinking volume of c: drive and making a volume of the new drive slow down your computer? Does using space on the new drive slow down your computer either?
View 5 Replies
View Related
Jun 30, 2013
I have this problem were external hard drive do not show up on my PC.
First my I put my friends in and it did not work, then I went out and brought one myself (different brand) and it does not show up.
Windows automatically installed the drivers it said it even know what time of external it was. But now it doesn't appear in explorer. What should I do. It appears in the device manger list, but how do I access it?
View 1 Replies
View Related
Oct 30, 2013
I have an external Lacie HDD which does not seem to function.When I plug it into a USB port I can see the HDD in the Computer Management snap in. I have formated it with exFAT. When I try to move something to the HDD it will start off right then will get to a certain %, after a while it will come up with a message saying that it cannot find the hdd.
I have monitored the activity of the flashing blue light & at the start of the transfer it would flash constantly, then slows down till eventually it will go off.What can I do to get the HDD to function right?
View 1 Replies
View Related
Jul 16, 2014
I am on an i7-12gb RAM+SSD Asus laptop, running Windows 8 x64. I am using two external HDDs attached via USB. One is an external-powered 2TB 3.5" WD, and the other is a 1TB 2.5" 5400 rpm Matshita HDD.
I store my music and movie collection in these drives, and a few setup files for the programs that I use.My problem is, from time to time when I boot up my computer, I start my browser, Word, iTunes, even Snipping Tool, etc. or when I need access to some function in a program (e.g. language proofing in Word, some function in Photoshop CS6, etc) my laptop randomly needs to access one, or both of my external drives and read something from there. I hear the whirring sound from the HDD and then my laptop starts responding again. This does not happen all the time, but it happens frequently enough to spoil a good workflow a few times during the day.
My external HDD's are slow in access times, and the 2TB WD actually shuts itself off after a non-use period and takes 6-7 seconds to turn back on.
So this translates into me randomly waiting for 6-7 seconds while using my laptop.
This case has been the same since using Windows 7 and through a few fresh installs.
I want these two HDD's to just store my files and not interfere with my OS' working.
View 9 Replies
View Related
Jul 27, 2014
Few days ago I bought a new Lenovo Thinkpad Edge E540. It has two USB3.0 ports and one USB2.0. I bought the machine without OS and installed Windows 8.1 Pro(x64) myself. Everything seems to be working fine except when I want to use My WD Elements 1TB external HDD in USB 3.0 port. It just doesn't get recognized. In USB 2.0 port it works fine.
What I've gathered and tried so far :
- Device manager does not show anything not even Unknown Device , yet my USB 3.0 Kingston pendrive works fine out of the box in the same slot
- I'm pretty sure the USB power is not the issue because the WD HDD , when plugged, starts blinking for a while , then lights up fulltime and i can feel and hear the drive spinning
- I've disabled USB selective suspend in my Power plan
- I've disabled Fast Startup
- In msconfig , im stuck at "Selective startup" (if changed it doesnt even let me APPLY and switches back to Selective right after I close/change tab in msconfig, I tried doing it in safe mode , same thing)
Using my harddrive in USB3.0 speed is essential for me.
View 5 Replies
View Related
Aug 22, 2013
So I have a WD external HD with all of my research data as well as some text books and other important things on there and for some reason I got an I/O error and after that the drive does not show on the computer anymore. The computer recognizes that there is a drive there and will read that it is a WD passport but cannot tell the size of the disk and will not register it as an external drive whose media I can explore and work with. What is wrong and how can I retrieve the data?
View 9 Replies
View Related
Jun 29, 2014
When I go toControl Panel -> Hardware and Sound -> Devices and Printersit can take 5 minutes or more to populate the window. A green bar slowly progressing along the top.
Sometimes (not always) when I click on the Network icon it shows an empty window, taking five or more minutes, also with a green bar slowly progressing along the top. EDIT: After I submitted this post I saw that the network window had finally populated. Still, it was incredibly slow and happened after the window showed a message saying "This folder is empty."
If I go to This PC that comes up almost instantly, including the mapped network drives.
View 6 Replies
View Related
Dec 5, 2013
My laptop is a Samsung, about 9 months old and has a pretty good spec. Suddenly, over the past few days, I've noticed that the keyboard in lagging whenever I'm logged on. It's fine at the login screen but, once I've logged on the problem occurs - and it happens on all programs. I know that this is specifically an issue with Windows 8, as I have a virtual Ubuntu machine on here that is working fine.
None of the keyboard settings have been altered and no new applications have been installed or upgraded recently.
View 7 Replies
View Related
Nov 25, 2012
I just installed Win 8 last night and everything seemed fine before I turned off the computer. Now, I'm a student and I work a lot from my USB/HD. I have both my usb and HD connected to the computer but the computer doesn't read them now.
View 8 Replies
View Related
Dec 28, 2013
I have a Toshiba 2TB External HD that came with NTI Backup software. Seemed to work fine until Win 8.1 installed and now I get the 'Corrupted' message, although the Drive shows up in This PC. Driver appears okay and as far as I can see the USB 3 hub the Drive is connected to is working. Have tried in USB 2 but with same result.
View 2 Replies
View Related
Jun 28, 2014
I have a external drive that I used for backup with XP. What do I need to do to make it work with windows 8? How do I get win to recognize it? It is a IDE drive and is connected via USB.
View 5 Replies
View Related
Aug 17, 2014
My portable hard drive stops showing up all of a sudden. It is connected to a USB hub. When I go to 'Disk Management' in 'Computer Management', the hard drive shows up as Unknown - Not Initialised. Also this hard drive works while not using the USB hub, and the USB hub works as well with other devices.
View 9 Replies
View Related
Jun 9, 2013
Is there a way I can back up my files from my 2tb WD My Passport External Hard Drive? I have a lot of files on there which I want to back up and convert to NTFS.
View 5 Replies
View Related
May 23, 2013
How do I unplug external drive safely, when I right click their is no safely remove menu like their was on windows vista.
View 2 Replies
View Related
Nov 12, 2013
I have Windows 8.1 x64, I have a 1TB drive attached on USB 3.0 port, the disk has four partitions, two are not allocated, I am trying to extend the volume on one of the active partitions, a Healthy, Primary partition but I get a message "The operation you selected will turn the selected disk(s) to Dynamic disk(s).
I'm not sure what it means but how do I get the extended volume to be a Basic volume?
View 6 Replies
View Related
Sep 15, 2013
HP Envy dv7, Windows 8
Seagate 2TB drive mounted in a Thermaltake, Max 5 enclosure. The drive does not show in Windows 8. Does show when running Disk Management (diskmgmt.msc) but shows as "Unallocated" without a drive letter. If run the Seagate drive tools, it shows up as unallocated, with drive letter "C". But there is obviously already a drive "C".
Disk Management does not present a means by which to assign a drive letter
View 8 Replies
View Related
Nov 10, 2013
I'm unable to 'Safely remove' or 'Eject' external USB 3.0 drives (I have 2) on my Lenovo Thinkpad running Wndows 8.1 without having the computer claim that the drive needs to be scanned for errors when the drive is reconnected to the same laptop or attached to my desktop PC's.
When I connect the same drives to my desktop PC's USB3 ports I initially get the same "scan for errors" prompt. But any further attaching and removal of the same drives to either my Windows 7(64) and Vista (64) dsktop PCs's does not reproduce the same error and further safe removal and reconnecting to those 2 systems is error free.
When scanned for errors there has never been any errors discovered. The 2.5" drives (one Seagate the other WD) are in Vantec USB 3.0 external enclosures that use a '2x USB plugs' cable; one for data and one for power. My usual removal method is to click on the 'Windows Explorer Safely Remove Hardware and Eject Media' icon on the Taskbar and select Eject for the drive and then wait until the 'Safe to remove' message pops up before removing the single cable attached to the external enclosure.
The USB Controllers are:
Intel(R) Series/C216 Chipset Family USB Enhanced Host Coltroller - 1E26
Intel(R) Series/C216 Chipset Family USB Enhanced Host Coltroller - 1E2D
Intel(R) USB 3.0 eXtensible Host Controller - 0100 (Microsoft)
I unsuccessfully tried updating the Intel(R) Series/C216 Chipset controller to v9.4.0.126 but it's still at v9.3.0.1011.
If it's a USB 3.0 driver/firmware related, or a 'feature' of Windows 8.1?
I can live with the problem as I'm sure that the drive is not being removed while data is being written, and Indexing is disabled on external drives. But I prefer using a computer that does not exhibit these sort of problems.
View 5 Replies
View Related
Aug 10, 2013
I have a Simpletech Simpledrive External Hard drive. It works on my desktop running xp. When I connect to my Asus N56DP Laptop, I hear the binging and all. But I do not see it in my control panel. I can see it in the device manager. Not in Disc MAnagement. Is there something I can do to get it to install and be accessible? I have some race car pictures I would like to post to Facebook.
View 1 Replies
View Related
Jul 12, 2014
Yesterday I formatted my computer and today I was updating it to Windows 8.1 again. Everything was fine except I forgot to disconnect my hdd. During the update, it said it was detecting and fixing errors. When the update finished, I tried to open my hdd and it wasn't accessible. How can I recover the data?
View 7 Replies
View Related
Oct 26, 2013
Every since I updated to Windows 8.1 my seagate external hdd has been randomly turning off and coming back on when I start to use it or open a program again
View 9 Replies
View Related
Feb 4, 2014
Just purchase this HornetTek X2-U3 JBOD USB 3.0 (HT-3210U3) - 3.5" DUAL BAY - JBOD - HDD ENCLOSURES
The only reason was because I had a spare 1TB drive and 500GB drive that I wanted to span into one volume, according the product spec it supports JBOD, which from my understanding should allow hard drive spanning, I understand that if one drive goes the data is lost, but that is not a concern of mine as I have numerous backups of my data. The problem is when I try to span 2 disk I get the following error "The operation is not supported by the object"
Here's a screenshot of the drives in question :
View 4 Replies
View Related
Oct 21, 2013
I updated to Windows 8.1 a couple of days ago on my desktop. Windows 8 was installed last June. I have a Seagate Free Agent GoFlex external drive connected to the computer for daily backups. Since upgrading to 8.1, this drive has been shutting itself off and then restarting at seeming random times. This event is accompanied by a soft buzz apparently coming from the desktop tower.
View 4 Replies
View Related
May 27, 2013
my external dvd drive keeps disconnecting and reconnecting from both the front and rear USB ports of my PC. It appears in Device Manager for a second and then disappears. The drive is connected via a SATA/USB converter and plugged directly into an electrical socket.
It also makes loading and ejecting sounds.
View 5 Replies
View Related
