How do I slave a hard drive on my Windows 8 Computer?
I had the hard drive slaved to my xp and it was fine, I plug it in to Windows 8 and it doesn't recognize it. Plug it back into the XP and it shows up fine. I'm not really experienced with this, I'm used to just hooking the hard drive up and booting up with XPs and it knows there's another HD available for storage, is the process different with windows 8? is there something specific I need to do to get it to recognize the HD?
Recently lost my mobo due to a power surge no drives detected dead screen. i have a SATA to usb and can see my drive, and data is in tact but when i try to boot in the new computer (system recognizes drive) i get a( to quick to read message) something about the pc i think the issue is the computer im trying to put this drive in is about 3 years younger than the computer the drive was running in. when i use the win 8 recovery on a flash it loops. while running the flash quick message about pc(it does read from the flash but then fails) i was able to use the flash to load 8 on a formatted drive(in this computer) worked fine. and will use as a last resort but would really like to, of course keep all my drivers and settings and software settings etc
Just bought a HDD on amazon and I was wondering if it comes with an SATA cable. It didnt say it did, nor did it say it didnt include one. If not, where could I buy one?
Im a computer repair tech, so I'm always hooking up hard drives from other computers to backup data or run certain off-line tasks
With windows 7, I could access the entire contents of a drive without any issues (via external USB dock)
Including documents and settings<user name> (Windows XP drives) or users<user name> (Vista, 7)
But with Windows 8, when I try to view the contents of the users folder, I always get
"You don't currently have permission to access this folder" - Click continue to get permanent access....etc
I never had to do this with Win7.
Now if I hit continue, I can indeed view those files and do my thing...but here's the issue: If Im trying to get a backup of somebody's dying drive, I can't afford the added stress of Windows making permissions change to an entire user folder...nor do I really want to make changes on the files (which the hard drive will be going back into original computer) by adding my credentials to every file/folder in there.
I just want to be able to get the files without any of the permissions prompts, something Windows 7 never asked for.
Is there some sort of setting I can do, registry or whatever....to eliminate this? I have UAC turned off, made some changes in secpol.msc.... so far no luck
i installed win7 on my SSD (like 22gb drive) in my asus today. Now, under my computer, it shows nothing but the SSD. it doesn't show my 500gb hard drive.. Im pretty sure its because of something i didnt do in the setup. What should i do to get it to show up? i really really really don't wanna re install windows because i got all the drivers and installed programs..
When I go to Computer Management my main (OS) drive shows as "Disk 1" and my 2nd internal data drive shows as "Disk 0". Should I switch the SATA cables so that the main drive will show as "Disk 0 and the 2nd internal drive as "Disk 1"?
Thought this was problem - Microsoft writes "When you resume a computer from sleep or from hibernation, the SATA hard disk drivers require the SATA hard disks to be ready within 10 seconds. However, a large SATA hard disk may take longer than 10 seconds to be ready. In this situation, the resume operation times out." in their fix for W7 - You receive various Stop error messages in Windows 7 or in Windows Server 2008 R2 when you try to resume a computer that has a large SATA hard disk
Have tried a variety of things like checking all current drivers, turning off hybrid sleep, power troubleshooter, windows update and the like on instruction but my ASUS p7p55d-e doesn't seem to have any Windows 8 specific drivers.
boot drive C: (partitioned into two logical drives)
I had one sata drive wanted to add second sata as data drive.i disconnected older hard drive connected new one,installed windows 8 on it,everything went fine.I did not format older drive yet,reconnected it afterwards,changed boot order in BIOS but the second sata drive reads bus number 0,one with operating system reads bus number 1.Is this O.K.?Usually bus number 0 should be the operating system is on.How can I change this?
I have 3 disks in my computer, of which 2 are SSDs.
I swapped the SATA ports between one SSD and the HDD so as to give the SSD a SATA port with maximum 6gb/s transfer speed, and now the access to the HDD is denied. The drive letters are correct, as they should be.
The user (myself, admin) did not change.
What can be done about it? I already tried to check the ownership of the drive and says STEVECOMPUTER/Administrators, which looks good, as my user account is an admin. Still, I have no access.
My computer has the BSOD that says inaccessible boot drive and i think its because of the sata mode selection. But there is only one selection AHCI when I think I need ata. I don't know if I do need it be there hard drives serial ports say ata.
I am trying to install a graphics card in my desktop pc. The heat sink on the card blocks the SATA port that the DVD drive is plugged into (SATA1) so I've switched the DVD drive to SATA2. The drive is now showing as connected to port2 in the BIOS, but in windows (Windows 8 64-bit) it isn't detecting the DVD drive at all? I've seen other posts about this on the internet suggesting to add a line to the registry, but I've done that and it doesn't solve the problem.
I'm booting off my SSD which is drive C: and I have games and programs on an extra hard drive which was origanally drive H: but after a restart it switched to I: and when I go into Disk Management to change it Drive H: isn't there.
I have a 2TB Western Digital My Book Essentials, it's filled with tons of old photos, movies, docs, games, and I'm scared to think of what else. The SATA to USB connector broke on it, so I took the drive apart and put it inside my computer. I opened up device manager because it wasn't showing up automatically and the 2TB is showing up as unallocated, I'm freaking out now because I'm scared the data was somehow deleted.What do I do?
edit: I realize also this isn't directly related to Windows 8 (besides the fact it's the OS I'm on), but I don't know where else to post it. I'd also like to say that I had a really deep feeling the drive was going to break continually for about two weeks before it happened, so if you have a similar feeling about something, don't ignore it!
I know there is good software out there to clone/image my hard drive and restore it to a new SSD drive. I'm just wondering though, since my laptop is brand new, I made a full recovery to a USB drive and included the OEM recovery partition.
Couldn't I just swap out the old HDD with the new SSD and boot with the recovery stick and do a full recovery back to the new SSD?
Also, however I do this, recover or image backup/restore, do I need to do some type of SSD alignment? I can't find a clear answer on that.
I've recently built a new computer with Windows 8.1 and have been having some BSOD issues. Initially, I was getting a "Kernel_Security_Check_Failure" BSOD about once every day or two. After running MemTest+ (and confirming my RAM was fine), I started reading around online and began thinking it was a driver issue.
At the time, I did have a Belkin Wireless USB adapter which did not have an official driver for Windows 8.1. I had gotten it to work by installing it in Win 7 compatibility mode. So to try and solve the problem, I uninstalled that driver and software, and went to hard-line ethernet. The BSOD's went away for about two days until:
Yesterday I had another crash. Except this time I didn't get a BSOD, but instead just a hard crash to black. When I rebooted I ran the Driver Verifier (after reading about it online), and then did a restart. When it booted back up, it started saying I had a "driver_verifier_detected_violation" BSOD appear, which was pointing to "nvlddmkm.sys". This looks like be some sort of Nvidia driver. I had to boot in safe mode to get back in and turn off driver verifier.
I am new to Windows 8, and first time with a laptop. I have 1tb hard drive (minus a few gb) in c drive. d drive is being used as recovery
This is how it was setup. What I would like to do is to partition the amount of space i have from c drive into another drive.
Can manage to partition some hard drive space over to another driver letter, if i do a fresh install of windows, will this new drive be formatted too?
(Just asking this because when I owned a desktop computer, I had two drives. A c-drive and a d-drive. When I re-installed windows 7 on the desktop, all my files were still available on the d-drive, hence asking the above last question).
A few months ago my laptop broke and it needed repairs. The HDD was replaced and i got my laptop back with one new HDD inside and one "broke" HDD in a bag. Later the "Repaired" Laptop crashed again so i bought a new one and took the HDD out of the old laptop. I bought a HDD case with USB connection and both of the HDD's where intact. The oldest HDD contained windows 7 and the replaced contained windows 8. Now i want to sell the Windows 8 HDD so i want it to be clean of personal files but i want it to keep windows 8. I thought the solution was to run the windows 8 on the HDD so i can use the program deletation program of that windows 8. The problem is i dont know how to run windows 8 of a hard drive. I have searched the internet but with no success.
My wife just got a new PC running Windows 8.1 Pro and she wants to re-connect her external hard drive that has all her game files on it to the new PC.
While the new PC recognizes the drive it states that it needs to be initialized , doing so would wipe the data currently on the drive which would be unacceptable. How to get the new PC to recognize this drive and its data?
I have just bought an AIO Asus desktop with 1 Tb of storage. The c: (Windows)drive is allocated 100gb and the d: drive 931gb. I just want to transfer all the data from my old computer. This was pretty much all in the folder c:>Users>Myname, but when I try to transfer it all into the same folder on the new computer, obviously with 100gb there is not enough space.
I have just tried to Refresh my Windows 8.1 installation, but when running the refresh Windows 8.1 came up with an error I have not seen before, let alone do the refresh.
It displayed a message saying "The Drive is Locked, you will have to unlock the drive to continue" so HOW do you unlock a Hard Drive?
How to do this before I either pull my hair out, or start from scratch and re-format the drive and do a complete new install of Windows 8.1
One thing I have done about a week ago which may be causing this problem is I converted the Drive from MBR to GPT and if this has locked the drive.
I have just bought a 4TB external USB 3.0 hard drive. The plan is to copy all of the data from my current internal 2TB drive to the 4TB, then I'm going to crack the case of the external hard drive open, take the drive out, and put it in my PC to replace the 2TB drive that's in there now (which I know will void the warranty). This isn't going to be a boot drive as I have an SSD for that.
I had read that Windows does not support large drives of this size and that it would show up as 2 partitions, so I was prepared to convert the drive to GPT in order to have 1 large partition. However, I connected the drive up to my Windows 8.1 machine and it shows as 1 large partition of 3.63TB, which is about what I expected.
Does this mean I don't have to convert the drive after all? Can I do what I'm planning to do and everything will work fine? Or do I need to convert it to GPT before I copy all of my data over and if so, how do I do that exactly?
My pc got stuck on a black screen after i restart it one time. When it finally lets me log in after turning the computer on and off manually, all of my programs were deleted, i couldn't access my computer's hard drive(?)(c:windows) , and i couldn't access system restore (or msconfig / any of the advance system tools). Any other way to do a full system restore without any of the pre mentioned options?
I have recently purchased and new computer with Windows 8. It's running smoothly, however I am encountering one particular problem.
My primary boot device is a 128GB SSD and obviously I want that space for the operating system install and some essential programs (photoshop, fireworks etc.).
My secondary device is a standard 1TB HDD. This is what I want to be my storage space for files, documents and non-essential programs.
The problem - Whenever I try to install a program to my second drive it comes up with the following error
"Error Writing to D:lahblahlahlah.xml. Verify that you have access to that directory"
I have check my permissions in the security tab and made sure that all the right check boxes are clicked. I have made sure to run the program as administrator and I've check to make sure that the directory is not set to 'read only'.
I successfully managed to create a virtual hard drive on my external drive to try boot windows 8 off it. I managed to boot it up and the login screen also appears as normal. I have a successful login, But on the second time login I am faced with black screen and the cursor. I'm aware that Microsoft has released a fix for this. I have attached the executable in the zip. I tried running this fix but it didn't work . After the black screen appears, even in safe mode I cannot run explorer.exe or open any folder to try running any executable files
My 60 GB C: drive ran out of room. The only thing installed on it is Windows 8 and whatever pre-installed programs came with my computer. I ran WinDirStat (WinDirStat - Windows Directory Statistics), a directory statistic tool and found two very large folders: C:/Windows is 22.2 GB and C:/ProgramData/Microsoft is 17.2 GB. This doesn't seem right. Can I free up room in these or are they both necessary? I read that windows 8 should take up around 20 GB, not 40 so how might I got about freeing up some space?
Also, I updated from Windows 7 about two months ago.
Well, since i installed Windows 8 Pro on my desktop, it already ate 26,8GB of disk space. I have no extra apps installed (posting this from Internet Explorer 10). How can i free some of that space?
I had been using my Dell Inspiron 15R 5521 with the factory installed Windows 8 Single Language version with a 1 TB Hard Drive. Its been over an year, i have been using it.
I used to install my programs in the C: Drive and separate my project related files, mp3s, etc in the D: drive so should their be any virus attack or anything unexpected, i could just format the C: Drive and have all my applications re-installed, which is no big deal for me.
Yesterday I had a very unexpected thing go down. My laptop started acting funny, it started restarted on its own over and over again and goes to the big blue screen notifiying me that the laptop had to be restarted.
Since i was under notion my D: Drive is safe, and the worse thing that could happen would a virus attack on the C: drive, i decided to refresh my PC because it was doing all sorts of weird stuff.
After refreshing my PC, I lost the entire D: drive.
Right now, my D: drive is my DVD drive. I can't figure out how to recover the other drive and its files. My Refreshing i had taken a backup as requested by the wizard but i couldnt view what all files are being taken as backup.
Looks like, it has only taken the backup of my C: Drive.
I just bought a lenovo Z580 with windows 8 and I also have a new hard drive coming. The first thing I tried to do was create factory restore disks so that when the new hard drive gets here I can remove the old hard drive and replace it with the new one and put the pre-installed windows 8 that came with the laptop on it. I can't however find a way to create factory restore disks. Is this still possible and if not what are my options for replacing a hard drive for this laptop and using the same windows install that originally came with it? I would prefer to not have to clone the hard drive because the new hard drive is an SSD so I will want to install windows with AHCI mode on.
Ultimately, I want to do a clean install of windows 8 on the new laptop using the existing pre-installed windows 8 key. I imagine this would be pretty simple if I had windows 8 install discs but I don't have those either as they didn't come with the laptop. what my options are to make this work?
I am running Windows 8.1 and it appears that my hard drive needs to be replaced. When the machine is turned on, frequently there is a slight screech and I feel it's best to replace the hard drive.
How do I make an exact bootable copy of the hard drive on a new hard drive and simply replace the drive with the new drive without having to reinstall Windows 8.1 or other programs and without affecting any of the files currently on the machine? If cloning software is required, are there any free programs I can download?
I've created a "Powered on machine" virtual installation of my Windows 8 on VMware VCentre Convertor to run in VMware Player, the size of the Hard drive was about 130GB, in the virtual machine I've deleted all my media files and uninstalled the large programs. The size of the C: drive is now 40GB which is more manageable for a Virtual Install which will be used to tweaking experimentation before I do it to my real Windows 8 installation.
How do I shrink the Virtual Hard drive from 130GB to say 45GB, I have installed the VM Tools and reading on the VMware website it saying you go to the VM Tools in the ghost install by right clicking it in the system tray or going to control panel on the ghost install and click on shrink. I have the icon in the system tray but the only right click options are about and there is nothing in control panel.
I have tried the "compact" option in the virtual machine settings by right click my Windows 8 virtual machine from the VMware player but it doesn't shrink the volume, it wirred away for an hour but the hard drive stayed the same size.
IF has Win 8 Pro 64bit in Wmware Player could they look to see if the shrink option is there on the Virtual install of Win 8 by right clicking VM tools in the system tray and clicking settings or options.
