Recently upgraded to Windows OS 8.1 Pro and cannot encrypt my HP external hard drive. Encryption pauses and states that disk has errors and please run chkdsk. Ran chkdsk and no errors found. Had no difficulty encrypting the C drive with the OS.
View 5 RepliesMy issue first originates with going through the windows 8.1 store app to upgrade windows 8 -> to windows 8.1.
"turn off bitlocker because it isn't supported in the edition of windows you want to install"
I am not sure whether i encrypted the drives after installing windows 8 or in windows 7, nevertheless i do know the encryption passwords to the drives. The biggest problem is therefore trying to remove/disable the encryption to upgrade.
The Applet in the control panel is missing for some reason. I have seen some guides which rely on this applet which is usually situated between auto play and colour management.
I would like to remove/disable the encryption for the upgrade, or confirm the idea that if i disconnect the two drives that are encrypted i could upgrade the OS to 8.1 and wouldn't need to worry about the encryption. The concern is that the 8.1 OS would not read the drives hence the upgrading message.
My specs are this , related to Bitlocker:
Windows 8 64bit - standard (non-enterprise, pro)Hard drives:1 X 128GB SSD - C:/ windows installed here ** NOT ENCRYPTED **1 X 2TB HDD - D:/ + E:/ **ENCRYPTED**1 X 3TB HDD - F:/ **ENCRYPTED**
I'm seeking full-disk encryption software. I want to encrypt the volume that my Windows installation is on.
First of all, does Bitlocker come on the home edition of Windows 8.1? I recall on previous versions it was only available in the Pro editions.
However, I would prefer to use an open-source disk encryption solution. I've searched but I have not found any that can encryption the Windows installation volume, the ones I found (such as TrueCrypt) can only set up additional encrypted partitions which is no good for me.
I have a Toshiba Satellite P855. it has an i5 processor, 8 gig of RAM, 64 bit os. running windows 8. 3 USB ports. Im not sure if they are all usb2. MY problem is that i can't connect any of my external hard drives to my laptop. When I plug them in to my desktop running windows xp, and my other laptop running windows 7, everything is fine, but my laptop running windows 8 doesn't even recognize that anything is plugged in to my usb ports. I have a lot of files, pictures music, and video files that i would like to have easy access to on my new laptop.
View 6 Replies View RelatedI read the tutorial on removing the Windows password requirement. I changed the settings per the example, everything seemed ok, I restarted and it logged me in as expected, but then it took me to the desktop and opened up all of my external hard drives. I then changed the setting back to requiring a password and still the same result. I have restarted several times and still the same condition.
View 1 Replies View RelatedJust purchase this HornetTek X2-U3 JBOD USB 3.0 (HT-3210U3) - 3.5" DUAL BAY - JBOD - HDD ENCLOSURES
The only reason was because I had a spare 1TB drive and 500GB drive that I wanted to span into one volume, according the product spec it supports JBOD, which from my understanding should allow hard drive spanning, I understand that if one drive goes the data is lost, but that is not a concern of mine as I have numerous backups of my data. The problem is when I try to span 2 disk I get the following error "The operation is not supported by the object"
Here's a screenshot of the drives in question :
I have an ASUS RT-AC68U router with 9 DBI dual band antennas. I need a program that allows me to copy and paste files to the external hard drives which are connected to the router's USB ports. An example of the application I am seeking is called "Silex Virtual Link", I need one like this, I used to use this 1 on my old D-Link DIR-825 router but it is not working with my new ASUS router and ASUS tech support couldn't solve anything.
View 2 Replies View RelatedI am trying to find a definitive answer to the question of mapping external hard drives. I have 4 external hard drives and would like to know if there is benefit in mapping them or not. Is there benefit in speed/response etc.... I do a lot of video streaming through media centre to xbox 360.
View 2 Replies View RelatedI just purchased a Dell Ultrabook that came with Window 8. I went to the Windows store and did the upgrade to 8.1. I've read a number of articles saying that encryption is turned on by default on a clean install of 8.1 but not necessarily on an upgrade. From some of the articles I've read, I should be able to see whether my device is encrypted on the PC Info page (see attached). I do not believe it is encrypted but I don't know for sure.
I've always used TrueCrypt on my previous devices but won't bother if my new device is already encrypted.
I was encrypting my 1T external WD hard drive with bit locker while power failed and now when I try to open my drive it says the drive is not ready despite I have the password and key, I never used any method or software I think software is any one know a solid solution to recover my data. and is the data recovery specialist can do it in the data recovery center.?
View 1 Replies View RelatedI recently upgraded my windows 8.1 to windows 8.1 pro as I wanted to enable bitlocker encryption on the laptop.
The issue is that I can't seem to enable or find bitlocker in any of the area's outlined. When I try to right click on the C: drive I don't have an option for bitlocker. When I go into control panel, there's no bitlocker icon. When I do a search on the machine for bitlocker I do get a "manage bitlocker" icon, but it's doesn't do anything when I click on it.
I have followed the tutorial on this site and downloaded/installed the reg files to enable it on a non tpm device. Can see that they did update the policy on the machine, but still no joy.
When I go into PC info on the machine in question I don't see anything about bitlocker. It's like it's not there. Do you have to add a windows feature to enable it?
We are facing an issue with bitlocker on Windows 8 machines since its not encrypting Hard disks through GPO. we are getting the below error on the log files
failed to initiate drive encryption with the following exit code: 80070057
We are using the same GPO for windows 7 machines and its working completely fine and also Bitlcoker_to_go is working fine with both OS's.
Is there anything specific in GPO to check for bitlocker encryption in windows 8?
I have a new Windows 8.1 machine and I wish to encrypt the drive using Bitlocker. It gives me 4 options to save a recovery key
1. Save to your Microsoft account
2. Save to a USB flash drive
3. Save to a file
4. Print the recovery key
Option 1 isn't available as I'm logged on using a local account.
i. What is the difference between options 2 & 3? i.e. I could save to a file on a USB drive
ii. Does option 2 mean the USB flash drive cannot then be used for other purposes?
iii. Does option 2 also mean I could use a USB external hard drive, or does it have to be a flash drive?
iv. Once the recovery key has been created, can the key then be copied to other locations or is it only going to work where Bitlocker puts the key?
v. Just thinking about printing the recovery key - can this be used without a password to access the drive, how sensitive/important is the printed key?
Is there any way to enable it or to be able to find it?
View 5 Replies View RelatedI've recently encrypted my main drive, and all is well. However, I would like to be able to encrypt one of my data drives as well and bitlocker isn't even detecting the drive's existence under "Fixed Drives"
I'm on windows 8.1 machine, the encrypted main drive is a SSD drive, and the data drive is a regular WD spinning drive SATA drive. I would like to have the WD data drive encrypted as well...
I have Windows 8.1 Core and Enterprise dual booted. Now, the real question here is, well I've read online that Windows 8.1 had finally added some of the encryption functionality of Bitlocker in a limited sense setup and turned on by default in all editions of Windows including Core - similar to how it does this with RT. The thing is on that point I've read about this, but no-one on the internet seems to know how to describe this functionality with more detail than just a mention of the existence of this.
Yes, I know Windows 8.1 is a brand new OS - so new that it won't be available to the normal public for another month and a half. And yes, I know, this RTM is still incomplete and when it will be complete within this next month and half maybe some of these new features (like the default limited Bitlocker as well as the Wifi hotspot functionality (which I figured out how to setup with Powershell, but there's no easy and normal way to go about doing this (how are normal people going to set it up? Normal people are afraid of Powershell/Command Prompt! Microsoft knows this - so I assume they'll address these concerns, and if they don't - there employees and executives must be smoking crack cocaine))).
But, what I'm getting at is this - is it safe for me to set up Bitlocker on the Enterprise edition/drive and let the Core edition/drive be as it is now? Is there a specific way I should go about doing this? If my concern on this is warranted - and it's a dangerous thing to try to do - which could have negative and unwanted consequences - than maybe I should just remove Enterprise, well if I should, then suggest that too. I like Bitlocker encryption for my more sensitive data - but I also like this Windows To Go feature as well. I would remove Enterprise if it's probably the best option. I am concerned of this too because I remember reading years ago that in reality having a dual boot setup of 2 editions of the same version of Windows (or just 2 editions of different versions) was/is actually something that isn't a good idea to have setup because it messes with the 2 versions of Windows somehow and drive C:, but I assume that as time has passed and technology has advanced maybe those issues that were authentic issues in the past might've been addressed with the new technology - but am unsure of this.
So, basically, the real question is - is dual booting these 2 editions of Windows safe in the new world of today with these new technologies - and if it is - is having the full Bitlocker functionality with Enterprise setup and having the Core OS setup as the main OS as well - safe?
I am "fresh" with BitLocker encryption. I need to encrpyt OS drive of laptop with Windows 8.1 and TPM chip. I have read few articles about encryption of OS drives with BitLocker ( with TPM / without TPM ) but never got a direct answer to my questions. So ... I want to ask:
1. Is it possible to encrypt the drive without using the TPM in case that there is TPM chip in the laptop because from what I have read BitLocker work with TPM by default but I don't want to use it. I have had already encrypt other laptops without TPM chips by setting up the group policies ( Computer Configuration Administrative Templates Windows Components Bit Locker Drive Encryption Operating System Drives and double click on Require additional authentication at startup ) and ... is it possible something like this to be made in this case ( when the laptop have TPM in it ).
What I want is the user to be asked for password on startup, recovery key to be saved to a file on external device( not to use usb flash drive as a key ) and to be possible simply to change my HDD in the future without need to manage TPM.
If this is not possible ... here is my second question:
2. Can I setup encryption with TPM like that:
- user to be asked for PASSWORD on startup
- recovery key to be saved to a file ( I don't want every time to use usb flash drive with recovery on it to unlock the drive ... what I want is just user to be asked for a password and when he enter the correct password the drive to be unlocked ).
When I want to turn on BitLocker on C drive (for some reason I can't do it on other drives) I get this message:
What should I do in order to enable BitLocker for not only C drive, but all of my partitions?
Which encryption is BitLocker using?
After I restored to default settings in the bios , I get into this problem of bitlocker requiring the key to start. I tried to suspend bit locker but bit locker management is not available . OS is win 8.1 , product is Dell Venue Pro 11 Tablet.
When I tried to use elevated command to disable bitlocker , the system does not recognize "protectors" in the command line.
What am I to do? I am sick of entering the very long Key , each time I bootup ...
I have BitLocker enabled on a laptop's boot/OS drive. It has worked well for almost a year but it hung when shutting down the other day and I had to press and hold the power button for 4 seconds to power it off. Now when I power it back on, it asks for the password as normal but then it starts in recovery mode and asks for the recovery key as well. Unfortunately I do not have the recovery key.
I know that the password I am entering is correct because it rejects any other password (as would be expected) and only prompts for the recovery key when I enter the correct password.
Am I going to be able to recover my data without this recovery key it is asking for?
I activated Bitlocker for my Operating system drive on a Windows 8 machine. But when starting the process I only can back up the recovery key. I have no dialog to choose how to unlock the drive. Thus even though Bitlocker is running, the PC can be turned and windows can be accessed by common user authentication. No password prompt appears at an early instant of the boot-process.
View 8 Replies View RelatedI have a pc with 4 drives. And I got a new job, working from home and i wanted to make one of the drives just for work. It was one that i had windows 7 one and no longer used after i bought an ssd an put windows 8 on it. I am really liking 8 and so I put 8 on the second drive that had windows 7 on it.
It all worked fine, but when i tried to have two windows 8 drives on the same pc it made the drives unbootable. I had to re install windows on both drives again. I did some reading and i think its the fast boot feature of windows 8 that's causing the issue. I disabled fast boot on both hard drives. And before I plug them both in at the same time. I want to make sure that im not going to loos all my data again.
I have a Sony Vaio all in one but it doesn't have a cd drive. I've purchased two and neither were recognized by Windows 8. Can found a USB optical drive recommended?
[URL]
I have a Microsoft Surface Pro 2 and I am running Windows 8.1 Pro Update 1.
I have been unsuccessful at building a WinPE image that provides BitLocker support. I searched around the internet and found many posts. Eventually, I ended up trying to build it with the various added packages I discovered in the various posts. However, in the end, none worked and this is the message I am getting after booting into my WinPE environment:
manage-bde.exe - Application Error
The instruction at 0xa20afa3b referenced memory at 0x0000013d.
The memory could not be read.
Click on OK to terminate the program
Here are the commands I eventually ended up using to build my WinPE image:
Code: dism /image:C:Bootmacriummount /add-package /packagepath:"C:Program Files (x86)Windows Kits8.1Assessment and Deployment KitWindows Preinstallation Environmentamd64WinPE_OCsWinPE-WMI.cab"dism /image:C:Bootmacriummount /add-package /packagepath:"C:Program Files (x86)Windows Kits8.1Assessment and Deployment KitWindows Preinstallation Environment
[Code] ....
But even with all that included, I still have the same error about the memory.
Will WinPE 5.0 x64 bootable environment work on a TPM-enabled machine? If so, how did you build your custom WinPE environment?
I have a Windows 8 Pro laptop with a single SSD. I just encrypted the entire drive using Bitlocker. The process prompted me to save the recovery key, which I did to an external drive. The encryption was successful but nowhere during the process was I prompted to choose a password. So I have the drive encrypted but when I reboot it does so normally without asking me for a key or password to access the drive.
View 9 Replies View RelatedComputer: Dell Inspiron 530
Operating System: Windows Vista home prem. upgraded to Windows 8 home Pro. 32 bit.
BIOS Rev. 1.0.15
Hard drives: (# 1) Samsung 500 Gig with 2 partitions. (# 2) WD 500 Gig with 2 partitions. Clone of #1
Ram: 3 Gig
Problem: On start up with either drive, the system goes to a blue screen with a clock (different time zone) on pushing Ctrl + Alt + Delete a log in prompt comes on. After logging in a window with the circling dots and Preparing Windows comes on That stays on for about 4 minutes and then a black screen comes on. Pushing the power button will cause Shutting Down to appear breifly and then the machine shuts down. I have a backup of Drive #1 on an external drive.
I turned on Bitlocker on three new Windows 8.1 laptops and saved the 48-digit recovery keys and associated identifiers, but I forgot to indicate which laptops they are associated with. Is there any way to find the identifiers/recovery keys on my laptops so I can document this? Or do I have to decrypt the laptop drives, turn off Bitlocker, and start all over again to generate new identifiers/recovery keys? My only options under Manage Bitlocker are Suspend protection, Back up your recovery key, and Turn off BitLocker.
View 5 Replies View RelatedJust bought a HDD on amazon and I was wondering if it comes with an SATA cable. It didnt say it did, nor did it say it didnt include one. If not, where could I buy one?
View 4 Replies View RelatedI purchased an Acer laptop from EBay. It was listed as a refurbished unit. However it looks like it was a complete system wipe and OS replacement. There are no Acer hardware drivers installed and no Acer applications available. My real problem is that the computer has been set up with two hard drives visible in "Computer" a (C drive and "New Volume (D. I believe that when this computer was "refurbished" the installer improperly assigned the drives. In disk management the drives are labeled Disk 0: System reserved 350 MB and New Volume (D 297.75 GB. Disk 1: (C 18.64GB. The C: drive is completely full, with the OS however, it is also the default drive meaning that everything tries to install to that drive, but can't. I want to move the (C drive to the New Volume (D drive or merge the two drives together. Is there a way to perform this task so that the computer will boot up into Windows 8.
View 9 Replies View RelatedIs it possible to have two hard drives in the computer and to be able to choose which one to start with ?
I have in mind that one hard drive has all my normal programs and the other is used for Flight simulation program.
Both hard drives would have win 8 installed. If I could use one hard drive and partition it so the flight sim is on a separate partition. However, for two reasons I wouldn't want this as the flight sim with scenery requires a lot of Gigs. and secondly I believe that it would run faster on its own hard drive.
So. Is it possible to set up the computer to decide which Drive I wish to start ? and if so, how to set it up ?
I was trying to install elementary OS alongside Windows but when the installation was finishing it crashed. When I went back to Windows my hard drive didn't appear and now it says in Manage>Storage>Disk Management Disk 1 Dynamic - Invalid i posted a picture of this.I tried with Ubuntu then on the other disk same thing happened. Is there a way to get them back to normal without losing the data?
View 9 Replies View Related