Hardware Drivers :: USB 3.0 Device Failed Enumeration?
May 13, 2014
I have a Seagate GoFlex 1 Tb USB 3.0 drive. All worked good until a week or two ago. Now the drive will not be recognized when plugged into a USB 3.0 port, the error given is "Unknown USB Device (Device Failed Enumeration).
If I plug the GoFlex drive into a a USB 2.0 port, it works. I can plug USB 2.0 devices into the USB 3.0 port and they work. I just can't plug my USB 3.0 drive into a USB 3.0 port and get it to work.
I have tried uninstalling the Unknown USB Device in Device Manager. I've also uninstalled all other instances of it failing to be recognized.
My motherboard has a VIA VL805 USB controller. I've used the drivers on Gigabyte's site and I've used VIA's drivers, no difference. I have the latest BIOS for my motherboard.
The drive does not show up in Disk Management when plugged into a USB 3.0 port. This shouldn't be a surprise since the device is unknown in the Device Manager.
I thought the problem might be with the USB 3.0 cable or the GoFlex drive's USB interface. So I bought a new USB 3.0 docking station and...same problem. The new docking station also fails enumeration. Basically what it boils down to is a USB 3.0 storage device will not be recognized in a USB 3.0 port. But they work when plugged into a USB 2.0 port.
View 7 Replies
ADVERTISEMENT
Feb 8, 2014
Last part of the message, (Device Descriptor Request Failed). I get this, in Device Manager, and I have searched for an answer on the net. Also it is a Code 43. I went through my laptop, with an HP Technician this morning, I might add at a cost of 5p/minute, for 30 odd minutes. He has said that because I had gone over to Windows 8.1 and the recovery discs I made will not load, to put back in Windows 8. I have to send the laptop back for re-installing the OS, because Windows 8.1 do not have the update for my problem. Also the R.H. USB socket has a failure ID:0GAPTK-6T7716-MFPWWK-8D1Q03. I personally think that this is all what the problem is. a duff USB. Is this a cop-out???
Does Windows 8.1 having driver WHQL problems?
I only found out the problem with the usb when I tried to download a Mobi file to a Kindle for my wife. The other usb's work OK.
View 9 Replies
View Related
May 13, 2014
I have got a problem with bluetooth device. I tried removing my bluetooth device but it failed to remove. It is displayed as "removing device" on the screen as shown in the picture. Now I cannot add the device again. I don't find the device when I search by clicking on "add a device" as shown in the picture. When I try to add from my mobile device it fails to add by showing a message as shown in the next picture.
View 4 Replies
View Related
Sep 15, 2014
(Unknown USB Device - A request for the USB device descriptor failed)
Massive problem I have encountered since buying a new laptop pre-installed with Windows 8.1
I have 3 external USB storage devices - 1x Corsair "Slider" 64GB, 1x HiTachi Touro 750GB, & 1x HiTachi 4TB external drive. ALL drives are coming up with the same error message and are not being recognized by Windows 8.1
The strange thing is, I also have another 2 PCs - one with Win7 and one with WinXP and the drives work without issue.
Why ALL of these drives do not work on this new laptop pre-installed with Windows 8.1?
Even stranger still is I have other thumb drives, a cheap Transcend 32GB (which is USB3.0) and a few cheapo (USB2.0) drives of various sizes by Strontium, Lexar and so on which work perfectly.
But the one that has me o.O is an expensive 64GB thumb drive called the Mach Extreme which also works perfectly with this laptop???
So all up 2x HiTachi drives & 1x Corsair thumb drive are not working and its driving me bonkers!
If no drives worked at all, then I would be seeking the manufacturer for maybe a faulty component. Dodgy USB ports, or maybe a motherboard problem. But having a handfull of drives, of various makes, sizes and both USB3.0 - 2.0 fully working leaves me scratching the old chrome dome as to what could be the issue
The HiTachi 4TB drive is my main storage device, I'm preety much stuffed if I can't get this drive working with this laptop. The same goes with the 750GB too. I REALLY need these 2 drives functional with this laptop.
View 2 Replies
View Related
Apr 30, 2014
I have a flash drive that I previously used in public computer lab (where many viruses linger) the other day to do my work. As I got home, the flash drive isn't working anymore, saying "USB Device not Recognized". I also noticed that it really took me a while to finally, safely remove it from the computer lab's PC. So I actually wonder if it actually removed my flash drive properly.
On Device Manager, it says "Unknown USB Device (Device Descriptor Request Failed)".On the Properties, the device status says "Windows has stopped this device because it has reported problems. (Code 43) -- A request for the USB device descriptor failed."
My flash drive is a Kingston Flash Drive DataTraveler (DT100) 16GB, and my PC is running on Windows 8.1.
Things I have tried:
- Shut down my PC, unplugged power and removed battery, waited for a while, booted my PC and try plugging in again.
- On Device Manager, uninstalled it and scanned for hardware changes, it still returns as "Unknown USB Device".
- On Device Manager, I clicked "Update Driver Software..." and it returns me a message saying "The best driver software for your device is already installed".
- Unfortunately, when I visited Kingston's website to check if there is driver for this specific flash drive, there isn't any... "There are no downloads or drivers available for this product".
- Used Windows 8's Troubleshooting tool. It only detected my problem, but was unable to fix it.
- I also tried plugging it to other devices that are running on Windows XP, Vista and 7, none does any better.
View 5 Replies
View Related
May 15, 2014
I keep getting this error in device manager:
Driver Management has concluded the process to add Service HdAudAddService for Device Instance ID HDAUDIOFUNC_01&VEN_8086&DEV_2806&SUBSYS_80860101&REV_10004&36B8CB0&0&0301 with the following status: 0.
All Audio devices that I use regularly are all working fine I just don't like seeing any kind of error
The device status on main page says: This device cannot start. (Code 10)
{Operation Failed}
The requested operation was unsuccessful.
Tried reinstalling drivers but nothing seems to work
View 1 Replies
View Related
Apr 17, 2014
when look in the device manager i get this:
[URL]
and PCI Device above this to unknown device ( i took this photo from google)
when i try to delete it back after restart or Scan hardware change
lenovo ThinkPad Edge E540 20C6006JIV win 8.1
View 9 Replies
View Related
Mar 2, 2014
I have 1 pair of Razer Megalodon USB headphones, on the start up of Windows 8.1 these headphones are not detected correctly. The only proof I have of this is in the device manager displays:
Universal Serial Bus Controllers -
Unknown USB Device (Device Descriptor Request Failed).
(Please see attached screenshots)
Once the device is disconnected and reconnected device manager then displays:
Universal Serial Bus Controllers - USB Composite Device
The device then shows in "Audio inputs and outputs".
View 2 Replies
View Related
May 31, 2014
When I tried to install lan drivers in my pc(dg41RQ mother board) through drivers cd, lan driver is not installing, it is getting failed for windows 8.1.
View 2 Replies
View Related
Jul 23, 2013
I just bought a lenovo laptop, which came with preinstalled Windows 8.
When I turn it on the first thing I see is:
EFI network 0 for IPv4 (20-89-84-23-c3-45) boot failed
Checking media (Fail)
EFI network 0 for IPv6 (20-89-84-23-c3-45) boot failed
And then a blue screen:
Default Boot Device Missing or boot failed
Insert recovery media and hit any key
Then select boot manager to choose a new boot device or to boot recovery media
View 9 Replies
View Related
Jan 17, 2014
I am unsure whether I should enable "Automatically get device drivers, apps, and info for new devices" when installing Windows 8 Pro?
What exactly will it do?
If I enable this, will Windows then automatically install software packages/drivers from the manufacturer, like for example the Logitech Setpoint software for their keyboards and mouse and similar software for other devices? I don't want or need that. Or will it behave like in Windows 7?
On my other PC with Windows 7 I see in Windows Update that there are a couple of optional updates, including that Logitech stuff, as well as some driver for a BenQ monitor I have and also nvidia video drivers. This kind of stuff I don't want or need installed automatically as important updates in Windows Update - so I am worried if enabling this automatic driver stuff in Windows 8 is different than Windows 7? Meaning that it will get installed secretly/automatically?
However, it's fine that Windows finds them so I can manually go and check if I want to install any of it.
The key is that the updates are optional in Windows 7, but I have seen a few people complain about Windows 8 installing stuff like video drivers and mouse drivers automatically.
View 2 Replies
View Related
Jul 22, 2014
I've installed Microsoft Windows 8.1 Version 6.3.9600 Build 9600 on my HP 430 Notebook PC with 1 GB RAM and Pentium CPU @ 2GHz 2 Cores.
Display drivers are not working properly (i.e., everything appears bigger and unclear), earlier I'd successfully updated the display drivers and made it work using Device Manager. making a backup of the drivers (may be in .inf format) from the installed drivers so that I don't have to update it every time I re-install it.
View 7 Replies
View Related
Sep 15, 2014
I'm running a custom build PC on which I clean installed a (legal) copy of Windows 8.1
My system works fine except it can not install drivers for ANYTHING non-standard. Keyboard, mouse, memory sticks, HDDs all work fine, however when I plug in my phone/tablet/camera etc via USB, it fails to install drivers and I can't use my device.
Here's what device manager looks like with my (android) phone plugged in
And when I select Update driver software, I get this error:
View 9 Replies
View Related
Apr 30, 2014
I dualboot Windows 8 & XP, this morning Windows 8 did not boot normally but, in a very restrictaed way reminisent of the XP "Safe Mode", with the error icon saying
" HD problem" back your files, pls see attached.
I recycled the HD cables rebooted Windows 8 several times with the same, then booted in XP & all worked fine, no problems reported, even FSX worked.
Asus P5K Premium WiFiiFi Intel Core 2 Quad Pro 2.4GHz, OCZ Vendetta Cpu Cooler, 2x2GB, DDR2 800 PC2-6400, GeForce 9800 GTX (PCI-E), sata 500gb Seagate Barraguta HD , Corsair 750M Psu, X45, Dual boot Windows 8 64 & XPhome sp3.
View 2 Replies
View Related
Apr 5, 2014
I am using Y410p, running Windows 8.1. I was downloading files using P2P, then I get some error related to disk.
But my whole system works perfectly, no affection on the performance. So, I decide to reboot. Here, the problem comes.
First, I got the 'Automatic Repair' during boot, then it reboots. This time, with BSOD stating UNMOUNTABLE BOOT VOLUME. Then it reboots again. Just black screen. nothing more.
what I do;
1. shut down
2. edit BIOS to boot using 'Legacy'
3. I boot using Windows 7 USB
4. I choose 'Custom Install'
5. I formatted the 'D' drive
6. reboot
7. manage to boot into Windows 8.1
I tried to re-do these steps, no avail, stuck at 'Setup is starting' screen (waiting for 2 hours and nothing happens)
I tried using the OneKey Recovery, no avail. The screen just turn black and nothing happens.
So,
- How do I manage this? (I really hope that no disk formatting will be involved).
- What is actually happening to my laptop? impending disk failure?
- If this is benign, it is preventable?
View 9 Replies
View Related
Sep 24, 2013
I have had Win 8 Pro up and running for about a month and I am having a continuing printing problem. I have 2 printers that I am trying to print to. An HP 4250 and a Ricoh C821DN. Both are on the network and I access them through the local IP address. They both installed fine, but half the time I cannot print to them. When I print, the print command finishes, but nothing prints and nothing is in the que.
I try printing a test page and I get an error box saying that "Test Page Failed to Print". Running through the troubleshooter only makes the printer the default printer and that has no effect. I can see the printer through my browser by typing in the IP address and everything is fine. I also have my laptop running windows 7 right next to me on the network and it prints to both printers just fine.
Sometimes Win 8 will print and sometimes it wont, often for hours at a time.
View 7 Replies
View Related
Jun 8, 2014
I have a toshiba canvio basics 1TB portable external hard drive usb powered. Model no. E05A100BBU2AK. I had purchased it some 3-4years back. It worked for some 4-5months or so. Then, whenever i plug it in the port, an error comes "FAILED DRIVER SOFTWARE INSTALLATION". The device doesn't come with a software installation CD or guide... It's plug and play only I think. The white LED light goes on flickering right when i plug it in till i remove it. A click sound along with metallic scratching sound comes from the device at a regular interval while plugged in & also I can feel the drive moving inside as soon as it is plugged.
I had tested it in all the ports of my system, also in many other systems of my friends but gives the same error on plugging in or the system does not identify it. It cannot be seen in My Computer. the hard drive is not getting recognised. In Device manager I cannot see any error in USB ports & everything is workng properly. USB ports works when other devices are plugged in.
View 9 Replies
View Related
Jan 22, 2014
This issue has been an ongoing one about close to a year after i purchased my PC. It is an ASUS PC when i go to the support site for updates in the past and now for my model i see BIOS updates.
Lately they have been all CAP Bios's,any time i try to use these type of BIOS's it is not recognized in the BIOS utility in the BIOS screen.
My last BIOS update was a ROM BIOS it worked fine, now all the future BIOS updates on ASUS's site are CAP.
If I try to rename the BIOS to a ROM i get an error "image integrity check failed". Of course i have spoken to ASUS Support in the past and now over the phone also, but no luck.
I do know it can be risky updating a BIOS if anything goes wrong the PC will become unstable or unusable.
Most will say unless there is not something in the BIOS update that will make improvements to the PC.
It has been 4 or so BIOS updates since one i have on this PC so far on ASUS's site.
I believe my motherboard is not compatible with a CAP BIOS, but why ASUS lists them for my PC.
View 4 Replies
View Related
May 9, 2013
Where to get the relavent OpenGl Drivers from for windows 8 ? Apps designed for Windows 8 are fine , anything which did play on Windows 7 (minecraft for example) just gets the same error message, "Bad videocard drivers! failed to find an accelerated OpenGL mode ".
View 8 Replies
View Related
May 14, 2013
Sometimes this message window appear and disappear as attached.
My motherboard is p6x58d premium and I installed every possible drivers. However this window is still coming.
View 9 Replies
View Related
Jun 10, 2014
I recently bought a cheap USB Hub off eBay. I plugged it in and connected my devices and it always works.
However, about 75% of the time when Win 8 boots, I get about a dozen "USB connect/disconnect" sounds and a window that says "USB Device not recognized". (sometimes 3 or 4 of these windows)
I've searched for this issue but every post that I find provides a recommendation for a USB device that is not working. None of these suggestions applies because after all the boot noise, the hub and it's devices work. It just seems like Win 8 is having trouble recognizing the Hub but keeps trying and eventually succeeds.
The Hub is plugged into a USB 2 port with a scroll wheel mouse and a Dymo LabelWriter 400 connected to the hub.
Win 8.1 Pro X64
Asus CM3870
Intel Core i7-3770
16GB RAM
View 7 Replies
View Related
Sep 9, 2013
No USB device seems to be getting detected on my machine when I plug in a flash drive or an external hdd I get the distinctive sound from my speakers that an USB device is plugged in but nothing is showing up in "My Computer". I went through the event logs and found that Windows is failing to load the USB device (check image in attachment logs.jpeg). Recently I installed iTunes, so I though it might be causing this problem but I uninstalled it even then the problem persists. I don't want to format my machine just because of this small problem. Is this a driver conflict ? How do I find out why windows is all of a sudden failing to load the USB devices ? I have uploaded a copy of the saved logs detailing this failure(logs.zip).
View 6 Replies
View Related
Jan 28, 2014
I have a strange problem: connecting a Canon Powershot G10 digital camera via USB 2.0 to my Win 8.1 laptop presents no problem (info pops up).
But: Using the same cable connected to my desktop PC, there is no reaction whatsoever. No device manager listing, no error message. The USB ports are all working perfectly with other devices (sticks, external hard drive, wireless mouse & keyboard). Moreover, until some weeks ago, the Canon camera was recognized normally.
Short of re-installing the whole USB controller
View 7 Replies
View Related
Sep 15, 2014
When I connect my DualShock 3 controller to my Windows 8.1 laptop it does not charge. I hear a beep, as in something was connected to the PC, then it seems to charge for a couple of seconds (lights flash on the controller) and then it stops. I am able to charge my phone and tablet so, it's just the DS3. It works fine on my Windows 7 computer, so it's not the controller.
View 5 Replies
View Related
May 11, 2014
Bluetooth device is not working
View 3 Replies
View Related
Sep 13, 2013
I want to change OWN Bluetooth device name. I am using windows 8 which comes with my new laptop Dell Inspiron 15z. The company has set my default bluetooth name as "User". However I want it to be changed but how.
I have tried going to Device manager, Devices and printers etc.
View 1 Replies
View Related
Apr 5, 2013
i Am trying to build my first PC with a Asus P8Z68M motherboard I have managed to get it all going but when I start it up its says - Using PCIE Gen 2 - cant find any device. What does this mean? Also, why does the PC beep at me whilst booting up?
View 9 Replies
View Related
Jun 15, 2014
So i purchased a Bluetooth portable speaker from a china it was very cheap and works great the website i got from is *REMOVED* and the model is the bv200 the only issue is that it has some annoying greetings and they are in chinese.
I want to know how can I access this device and delete or replace this greeting, it has a micro usb connection but when i plug it in to my computer it dosent show up in the device list.
View 1 Replies
View Related
Sep 15, 2014
A couple days ago, somehow, I turned on 'scanning your device' and now I get a black screen every time I plug my phone into the USB port to charge it. how to disable this 'feature'. It's really annoying because the connection is a bit worn, and it keeps connecting and disconnecting...connecting and disconnecting...connecting and disconnecting...connecting and disconnecting...connecting and disconnecting...connecting and disconnecting...connecting and disconnecting...connecting and disconnecting...connecting and disconnecting...
I don't want anything to happen when I plug the phone into the USB port.
View 3 Replies
View Related
Sep 15, 2014
I'm running Windows 8.1 on a SDD with a second HDD along side it. Inside the Device Manager I disabled my second HDD and rebooted my system.
Windows started as normal, but a few key windows programs have stopped working:
- Task Manager
- Device Manager (basically all control panel functions)
- Powershell (Command Prompt Works, but can't be opened with administrative rights)
The main problem is that I now can't enable my second HDD. Why the HDD is needed for these programs and how I can re-enable my HDD?
View 2 Replies
View Related
Mar 27, 2014
Recently my "PS to PC Converter" USB device, as shown in image was not recognized by my laptop. It was working fine as of yesterday, where I was playing FIFA with my friend. Then today when I plug it in, it says USB device not recognized even though I can still on the analog but the controller is not detected by the game. Other games that I use to play with controllers are also not detecting the device. I kept reinstalling the driver but still the same message. Restarting computer, turning it off for a few minutes did not solve my problem too. I'm pretty sure my USB ports are fine as my mouse, keyboard and hard drives are working in all of the USB ports.
EDIT: I check the Device Manager and found a yellow exclamation mark on Other Devices named "Unknown device", I check the properties and says Code 43 on the status. I Enable/Disable it, still the same message.
View 9 Replies
View Related
