Audio Device Cannot Start - Operation Failed
May 15, 2014
I keep getting this error in device manager:
Driver Management has concluded the process to add Service HdAudAddService for Device Instance ID HDAUDIOFUNC_01&VEN_8086&DEV_2806&SUBSYS_80860101&REV_10004&36B8CB0&0&0301 with the following status: 0.
All Audio devices that I use regularly are all working fine I just don't like seeing any kind of error
The device status on main page says: This device cannot start. (Code 10)
{Operation Failed}
The requested operation was unsuccessful.
Tried reinstalling drivers but nothing seems to work
View 1 Replies
ADVERTISEMENT
Mar 2, 2014
I have 1 pair of Razer Megalodon USB headphones, on the start up of Windows 8.1 these headphones are not detected correctly. The only proof I have of this is in the device manager displays:
Universal Serial Bus Controllers -
Unknown USB Device (Device Descriptor Request Failed).
(Please see attached screenshots)
Once the device is disconnected and reconnected device manager then displays:
Universal Serial Bus Controllers - USB Composite Device
The device then shows in "Audio inputs and outputs".
View 2 Replies
View Related
Jan 4, 2014
The device is manufactures by Quallcom Atheros and the device manager has a yellow sign with the following message:
device cannot start (code 10) object path component was not a directory
Tried to update drivers but they are updated. Drivers listed in the device manager are all in C:windowssystem32drivers ...
View 4 Replies
View Related
Feb 8, 2014
Last part of the message, (Device Descriptor Request Failed). I get this, in Device Manager, and I have searched for an answer on the net. Also it is a Code 43. I went through my laptop, with an HP Technician this morning, I might add at a cost of 5p/minute, for 30 odd minutes. He has said that because I had gone over to Windows 8.1 and the recovery discs I made will not load, to put back in Windows 8. I have to send the laptop back for re-installing the OS, because Windows 8.1 do not have the update for my problem. Also the R.H. USB socket has a failure ID:0GAPTK-6T7716-MFPWWK-8D1Q03. I personally think that this is all what the problem is. a duff USB. Is this a cop-out???
Does Windows 8.1 having driver WHQL problems?
I only found out the problem with the usb when I tried to download a Mobi file to a Kindle for my wife. The other usb's work OK.
View 9 Replies
View Related
Jun 11, 2013
I'm have a problem with a high definition audio device, it says This device cannot start. (Code 10). I have tried updating the driver and deleting and reinstalling the device, nothing has worked.
I can hear sound, but I can not record anything. I have tried several recording devices, like Audacity and MS Recorder and nothing works.
I have attached captures of my computer information.
I run Windows 8, 64 bit. The computer is only six months old.
View 8 Replies
View Related
Feb 4, 2013
an error message in Device Manager when installing the network attached storage drives like MyBook Live, the drives themselves seem to work fine and i have access to them (most of the time) on my home netwok, however i keep getting that little yellow triangle telling me that something is wrong, specifically:
the device manager error code is This device cannot start. (Code 10)
View 1 Replies
View Related
May 13, 2014
I have a Seagate GoFlex 1 Tb USB 3.0 drive. All worked good until a week or two ago. Now the drive will not be recognized when plugged into a USB 3.0 port, the error given is "Unknown USB Device (Device Failed Enumeration).
If I plug the GoFlex drive into a a USB 2.0 port, it works. I can plug USB 2.0 devices into the USB 3.0 port and they work. I just can't plug my USB 3.0 drive into a USB 3.0 port and get it to work.
I have tried uninstalling the Unknown USB Device in Device Manager. I've also uninstalled all other instances of it failing to be recognized.
My motherboard has a VIA VL805 USB controller. I've used the drivers on Gigabyte's site and I've used VIA's drivers, no difference. I have the latest BIOS for my motherboard.
The drive does not show up in Disk Management when plugged into a USB 3.0 port. This shouldn't be a surprise since the device is unknown in the Device Manager.
I thought the problem might be with the USB 3.0 cable or the GoFlex drive's USB interface. So I bought a new USB 3.0 docking station and...same problem. The new docking station also fails enumeration. Basically what it boils down to is a USB 3.0 storage device will not be recognized in a USB 3.0 port. But they work when plugged into a USB 2.0 port.
View 7 Replies
View Related
May 13, 2014
I have got a problem with bluetooth device. I tried removing my bluetooth device but it failed to remove. It is displayed as "removing device" on the screen as shown in the picture. Now I cannot add the device again. I don't find the device when I search by clicking on "add a device" as shown in the picture. When I try to add from my mobile device it fails to add by showing a message as shown in the next picture.
View 4 Replies
View Related
Sep 15, 2014
(Unknown USB Device - A request for the USB device descriptor failed)
Massive problem I have encountered since buying a new laptop pre-installed with Windows 8.1
I have 3 external USB storage devices - 1x Corsair "Slider" 64GB, 1x HiTachi Touro 750GB, & 1x HiTachi 4TB external drive. ALL drives are coming up with the same error message and are not being recognized by Windows 8.1
The strange thing is, I also have another 2 PCs - one with Win7 and one with WinXP and the drives work without issue.
Why ALL of these drives do not work on this new laptop pre-installed with Windows 8.1?
Even stranger still is I have other thumb drives, a cheap Transcend 32GB (which is USB3.0) and a few cheapo (USB2.0) drives of various sizes by Strontium, Lexar and so on which work perfectly.
But the one that has me o.O is an expensive 64GB thumb drive called the Mach Extreme which also works perfectly with this laptop???
So all up 2x HiTachi drives & 1x Corsair thumb drive are not working and its driving me bonkers!
If no drives worked at all, then I would be seeking the manufacturer for maybe a faulty component. Dodgy USB ports, or maybe a motherboard problem. But having a handfull of drives, of various makes, sizes and both USB3.0 - 2.0 fully working leaves me scratching the old chrome dome as to what could be the issue
The HiTachi 4TB drive is my main storage device, I'm preety much stuffed if I can't get this drive working with this laptop. The same goes with the 750GB too. I REALLY need these 2 drives functional with this laptop.
View 2 Replies
View Related
Apr 30, 2014
I have a flash drive that I previously used in public computer lab (where many viruses linger) the other day to do my work. As I got home, the flash drive isn't working anymore, saying "USB Device not Recognized". I also noticed that it really took me a while to finally, safely remove it from the computer lab's PC. So I actually wonder if it actually removed my flash drive properly.
On Device Manager, it says "Unknown USB Device (Device Descriptor Request Failed)".On the Properties, the device status says "Windows has stopped this device because it has reported problems. (Code 43) -- A request for the USB device descriptor failed."
My flash drive is a Kingston Flash Drive DataTraveler (DT100) 16GB, and my PC is running on Windows 8.1.
Things I have tried:
- Shut down my PC, unplugged power and removed battery, waited for a while, booted my PC and try plugging in again.
- On Device Manager, uninstalled it and scanned for hardware changes, it still returns as "Unknown USB Device".
- On Device Manager, I clicked "Update Driver Software..." and it returns me a message saying "The best driver software for your device is already installed".
- Unfortunately, when I visited Kingston's website to check if there is driver for this specific flash drive, there isn't any... "There are no downloads or drivers available for this product".
- Used Windows 8's Troubleshooting tool. It only detected my problem, but was unable to fix it.
- I also tried plugging it to other devices that are running on Windows XP, Vista and 7, none does any better.
View 5 Replies
View Related
Dec 18, 2012
Recently upgraded my Dell Latitude E6420 to Windows 8.
When I attempt to use my Sony TV as a second monitor via HDMI cable, I no longer get audio. Cable is fine and worked previous to upgrade.
Video comes up fine. In "Playback Devices" (with both "Show Disabled" and "Show Disconnected" devices checked), Digital Audio is greyed out and unable to be selected as a default device - simply says "Not plugged in".
I've tried updating various drivers, but to no avail.
Display adapters:
Intel(R) HD Graphics 3000NVIDIA NVS-4200M
View 9 Replies
View Related
Jul 17, 2014
why my audio goes every time I plug in my mouse or external hard drive into one of the usb ports. The only way I can get audio back is by restarting the computer.
I'm running Windows 8 on ASUS UX32VD.
I've gone into Sound settings, Communications tab, and selected Do Nothing.
View 2 Replies
View Related
Sep 28, 2013
Last night I restarted my computer and for some reason when I booted it back up I was not able to use my headsets sound. I went through the settings disabling audio drivers and nothing worked, I also tried to change the default audio device but that wouldn't work either. For some reason I can't change any audio settings when i press OK and open back up the windows the settings are the same.
The thing that puzzles me that everything was working fine until I restarted my computer. I am also confused why windows won't let me change my default audio device under the playback devices menu.
Details: Headset: Turtlebeach P11's
View 1 Replies
View Related
Jul 23, 2013
I just bought a lenovo laptop, which came with preinstalled Windows 8.
When I turn it on the first thing I see is:
EFI network 0 for IPv4 (20-89-84-23-c3-45) boot failed
Checking media (Fail)
EFI network 0 for IPv6 (20-89-84-23-c3-45) boot failed
And then a blue screen:
Default Boot Device Missing or boot failed
Insert recovery media and hit any key
Then select boot manager to choose a new boot device or to boot recovery media
View 9 Replies
View Related
Oct 30, 2013
I have two operatings systems. Windows 7 on one drive and Windows 8 on the other. I have a program called PowerDirector 11 installed on the Windows 7 drive. I went to install the said program on the Windows 8 drive, (to be able to access it from either drive) and when I try to open or run the .exe, I get the error "The application has failed to start because the side-by-side configuration is incorrect.
View 3 Replies
View Related
Feb 27, 2014
I'v been trying to get my new USB sound card (Roland Duo Capture EX) working with Pro-Tools 10, but when I choose the Roland as the playback engine on starting up ProTools, I get an error stating that it is in use by aother application.
Also, when I change the sample rate in the "Sound" window for that sound card, I get the following: "The Device is being used by another application"...
Is there some way in Windows 8 to check what applications are hogging the card?
View 8 Replies
View Related
Aug 4, 2013
I have bought a new wireless adapter as my old one had very poor strength and I am really impressed with the signal on this one but after a while it disconnects and then it says there are no available connections. I have to restart the adapter to get it to work again.
If I am gaming online and this happens it's not very useful and I could really do with fixing it.
The adapter is the TL-WN822N by TP-Link.
I have checked the compatibility on the vendor list and it is compatible. I installed the drivers off their website which were 64bit.
I am running Windows 8 64bit.
View 3 Replies
View Related
Jul 9, 2014
I have been having sound problems with the speakers on an HP Ultrabook. There are times when the laptop speakers stop working. When this occurs, I go to Control Panel>Sound, select the speakers(only one set to select), select Configure and Test. After selecting Test, I receive the message Device In Use. The device is being used by another application. Please close any devices that are playing audio to this device and then try again. I've gone to Properties for the speakers, Advanced tab and unchecked option "Allow applications to take exclusive control of this device". I've also used Run sndvol to try to determine the application, but it only shows Device:Speakers/HP and Applications:System Sounds.
The only way I've been able to get the speakers to work is to reboot or disable and enable the driver for the IDT High Definition Audio CODEC.
View 9 Replies
View Related
May 29, 2013
I get the error attached.
However, devices show up in device manager.
When I try to re-install the driver from the dell site, the installation fails. Here is the error log:
[05/29/13 12:32:09] Update Package Execution Started
[05/29/13 12:32:09] Original command line: "C:UsersCathleenDocumentsDell Downloads9ef71118-f3dd-4d85-90ac-914583774eb1Audio_Driver_G22H1_WN_6.0.1.6662_A01.EXE"
[Code]....
View 5 Replies
View Related
Apr 21, 2013
I have Windows 8 64 bit installed on a new Hp h8 1360t . On each restart I get this error.
"PKU2u log failed to start with the following error: 0xc0000035".
The results of my searches to resolve this error has been minimal to say the least.I have run sfc/scannow and a chkdsk /r with no positive results. how to correct .
View 5 Replies
View Related
May 15, 2014
Issue Details: AODDriver 4.2.0 service failed to start - The system cannot find the specified file. This from Event Viewer:
- System - Provider [ Name] Service Control Manager [ Guid] {555908d1-a6d7-4695-8e1e-26931d2012f4} [ EventSourceName] Service Control Manager - EventID 7000 [ Qualifiers] 49152 Version 0 Level 2 Task 0 Opcode 0 Keywords 0x8080000000000000 - TimeCreated [ SystemTime] 2014-05-15T13:36:25.744249100Z EventRecordID 95248 Correlation - Execution [ ProcessID] 616 [ ThreadID] 620 Channel System Computer Desktop Security
- EventData param1 AODDriver4.2.0 param2 %%2 41004F00440044007200690076006500720034002E0032002E0030000000
Binary data:
In Words
0000: 004F0041 00440044 00690072 00650076
0010: 00340072 0032002E 0030002E 0000
In Bytes
0000: 41 00 4F 00 44 00 44 00 A.O.D.D.
0008: 72 00 69 00 76 00 65 00 r.i.v.e.
0010: 72 00 34 00 2E 00 32 00 r.4...2.
0018: 2E 00 30 00 00 00 ..0...
Uninstalled AMD software and drivers normally. Installed older or latest AMD software, and it is still there.I have completely uninstalled all AMD software using the AMD cleanup utility. I have installed the previous version 13.12, but the error still appears. Strangely this error was not there prior to installing 14.4, but now it is there using 13.12 even though the AMD cleanup utility was used.So nothing seems to clear this except to uninstall all AMD software using the cleanup utility.When no AMD software is installed there is no error (obviously!).
However, when subsequently installing any AMD graphics software the error returns.
Graphics Card
Radeon HD 6450
AMD Catalyst Driver Version, and Driver History
14.4, previous 13.12, and all previous Catalyst software for many years.
Operating System
- Windows 8.1 Update 1 Pro 64-bit.
[Code].....
View 5 Replies
View Related
Sep 15, 2014
Since yesterday I have noticed a delay during the welcome circle loading screen after login. Then I checked the event viewer and found out that I get around 15 errors of the same event ID 131 which contains the following details:
Log Name: Microsoft-Windows-DeviceSetupManager/AdminSource: Microsoft-Windows-DeviceSetupManager
Date: 9/13/2014 1:07:25 AM
Event ID: 131
Task Category: None
Level: Error
Keywords:
[Code] ....
I have not done any hardware changes and why these error suddenly started to show up. Just to clarify, I have tried the following troubleshooting steps:
Ran the following commands:
sfc /scannow
DISM.exe /Online /Cleanup-image /Restorehealth
net stop wuauserv
ren SoftwareDistribution SoftwareDistribution.old
net start wuauserv
finally, I also tried running the "Windows Update Diagnostics Tool"
SF diagnostic logs attached
View 9 Replies
View Related
Jun 16, 2013
This is reg uICE (Universal Infrared Control Engine). After installing in my Win 8 64-bit machine whileI try to launch it, I am getting the error-- The task monitor failed to start.reinstall uICE. Error: The service has not been started.
Reinstalling did not work. Nor did compatibility mode installation. Basically uICE declined to start in my Win 8 64 bit. Please note that this program worked fine on my previous 32 bit version of Win 8.
Is there a way to make it work on my PC? Alternatively you can suggest me some other programs like uICE to remote control multimedia applications like WMP, VLC player, Winamp etc?
View 4 Replies
View Related
Sep 30, 2013
This the error message I get : Windows failed to start. A recent hardware or software change might be the cause. To fix the problem:
1. Insert your windows installation disc and restart your computer.
2. Choose your language settings, and the click "next".
3.Click "repair your computer".
If you do not have this disc, contact your system administrator or computer manufacturer for assistance.
File: BootBCD Status: 0xc0000001 Info:
The best configuration beta for your PC is missing or contains errors.
I have tried all the recovery options using windows 8 iso DVD - none worked
Also I did create "Windows 8 Repair Disc at the time When I upgraded from Windows 7. I tried it too - with no result.
Note: I upgraded using windows assistant.
View 9 Replies
View Related
Aug 7, 2014
I been having issues with my Ativ Tab 3 so I shipped it back to Samsung to fix it. Before I shipped it, It always played the sound that indicated that a bluetooth device was connected. After receiving it, I noticed it had fresh copy of Windows 8 pro on it with drivers, etc. So I updated it to 8.1 and reinstall everything and noticed the bluetooth devices no longer play the sounds when they connect.Tried refreshing, sfc /scannow, and redoing audio drivers.
View 2 Replies
View Related
Feb 12, 2014
while going through my device manager, a yellow triangle sign caught my attention. It is under the "Sound, video and game controllers' labeled as 'Bluetooth Audio Device". When opening the properties, it says that "This device annot start. (Code 10) Object Path Component was not a directory object.
I went to the MSI website (The laptop is a 4 days old MSI GS70-229) and could not find the corresponding driver for this so called "Bluetooth Audio Device". Windows update was unable to find anything, and the "Roll Back Driver" button was disabled. Driver provider is Qualcomm Atheros Communication.
View 1 Replies
View Related
May 7, 2013
I have been playing music and watching movies on my Hp pavillion g6 intel core i3 laptop player without any hitch for the past 3month,its pre-installed,the problem now is that,it is playing without audio sound,i navigate to setting,and click on volume icon,it read "DISABLED",and again"No audio output device is installed".
View 2 Replies
View Related
Jan 1, 2014
Basically I have an ASus ux301la (zenbook infinity) and i noticed that after installing Displaylinks software (port replicator software) my default sound device was called (USB AUDIO) and that my Realtek sound device kind of went missing (no sound devices on the playback tab in the sound settings). I had no backups at teh time as its a new laptop and i really dont want to re-install 8.1 from scratch as it took me over a day to configure this thing to my personal config.
So I uninstalled the diplaylink software and uninstalled/reinstalled the sound drivers from the asus site and each time i did so it would create a new sound entry, hence all teh duplicates. Now i still have a problem because although sound works, i have to manually select the correct playback device in VLC player and I cannot see any sound devices in the playback tab on SOUND settings.
View 6 Replies
View Related
Mar 13, 2012
I only get a buzzing noise out of my speakers when I play music. Otherwise I get nothing. Under device Manager it says;
VIA HIGH DEFINITION Audio
Provider MS
Date 17/02/2012
Version 6.2.8250.0
Signed MS
My Motherboard is an ASUS M5A78L-M USB3
It also gives a warning that "Device is not compatible under current OS"
View 9 Replies
View Related
Feb 15, 2014
How can I solve Playback & Record device not found in windows' sound?
Sound driver status in device manager still has no conflict and Realtek Audio manager can detect only plugged in jack. I have tried to reinstalled audio driver without any conflict but still nothing in windows' sound.
If I try to restore by windows restore point, would the problem solved?
View 1 Replies
View Related
Apr 15, 2013
I have a Toshiba Satellite L875-S7110 with Windows 8 that is a few months old now, and had been working fantastic until last night. Windows did an update, and now I have a red X over my sound icon that states "No Audio Output Device is installed."
Things I have tried so far to try to fix this:
I went to the Device Manager > Sound, video and game controllers. I have "Intel(R) Display Audio" and "Realtek High Definition Audio" both listed with the little yellow caution icons on them. I have tried to disable, then enable each of them seperately and both together, which had no effect. I have tried to unistall both of them, restart the laptop, and let the drivers reinstall themselves, to no effect. I have tried downloading the latest drivers from both the Intel and Realtek product sites. The one from Intel seemed to install correctly and asked to restart the computer. There was no positive change to the audio though, stil the same message. The Realtek driver won't finish installing and throws the error: "Install Realtek HD Audio Driver Failure!! [Error Code: 0x000000FF]"
If I go to Control Panel > Sound, under both the Playback and Recording tabs, it says "No audio devices are installed."
If I go to Recovery, to try to roll back my updates with System Restore, I get errors on ALL of my restore points with the following message, "System Restore did not complete successfully. Your computer's system files and settings were not changed. Details: The specified restore point is missing or corrupt. Try again using another restore point. (0x81000201)"
View 1 Replies
View Related
