I have been playing music and watching movies on my Hp pavillion g6 intel core i3 laptop player without any hitch for the past 3month,its pre-installed,the problem now is that,it is playing without audio sound,i navigate to setting,and click on volume icon,it read "DISABLED",and again"No audio output device is installed".
View 2 RepliesI have a Toshiba Satellite L875-S7110 with Windows 8 that is a few months old now, and had been working fantastic until last night. Windows did an update, and now I have a red X over my sound icon that states "No Audio Output Device is installed."
Things I have tried so far to try to fix this:
I went to the Device Manager > Sound, video and game controllers. I have "Intel(R) Display Audio" and "Realtek High Definition Audio" both listed with the little yellow caution icons on them. I have tried to disable, then enable each of them seperately and both together, which had no effect. I have tried to unistall both of them, restart the laptop, and let the drivers reinstall themselves, to no effect. I have tried downloading the latest drivers from both the Intel and Realtek product sites. The one from Intel seemed to install correctly and asked to restart the computer. There was no positive change to the audio though, stil the same message. The Realtek driver won't finish installing and throws the error: "Install Realtek HD Audio Driver Failure!! [Error Code: 0x000000FF]"
If I go to Control Panel > Sound, under both the Playback and Recording tabs, it says "No audio devices are installed."
If I go to Recovery, to try to roll back my updates with System Restore, I get errors on ALL of my restore points with the following message, "System Restore did not complete successfully. Your computer's system files and settings were not changed. Details: The specified restore point is missing or corrupt. Try again using another restore point. (0x81000201)"
My problem is Windows 8 will occasionally BSOD after the sound goes quiet or dead while watching a video or playing a game and I turn off my M-Audio Fast Track Pro in an attempt to recover sound. This is basically a soundcard that is used to record music or MIDI components. It is attached via USB. I have disabled all other soundcards besides the M-Audio.
Im certain the drivers for this device are current and up-to-date. They do state to support Windows 8 on the M-Audio website found at Fast Track Pro Drivers
My tool named "Blue Screen Viewer" shows to have 2 dump files, but I used the "SF_Diagnostic_Tool" as per forum instructions. The zip file has been attached ...
I successfully got bootcamp to work on my iMac, and the only issue that I have run across is that I do not have any sound whatsoever coming out of my speakers.
The sound icon just remains at the speaker with a red cross, and no matter what I do, I just can't get it to work.
In Device Manager, the sound device that is being used is 'AMD High Definition Audio Device', and I can't seem to find an update for it anywhere. Under the sound area of control panel, if I go to the playback tab it says that the only available playback device is 'AMD HDMI Output', and it says that is "not plugged in".
I'm having a little problem with my onboard audio, having just installed Windows 8.1 (clean install). I have an Asus P8Z77-V LE PLUS motherboard, which includes a "Realtek - ALC889 8-Channel High Definition Audio CODEC" onboard.
I have installed the latest realtek drivers; R2.73 from the official website.
Now, here's my problem: when I was using Windows 7 on this same machine, I could plug headphones in the front panel connector, as well as speakers in the green back panel connector. This would give me two audio outputs in the device manager/sound list, which was pretty practical and enabled me to output different applications through the speakers or the headphones.
Now, however, there's only one output, irrelevant of whether or not I have two outputs plugged in at the same time. They appear in the device manager as a single device called "speakers" (see picture). Instead of both having separate outputs, they both output exactly the same audio.
My laptop with OS Windows 8 will become no sound frequently. I try to find out the cause, and discover that the device is being used by another application, but I can't find any application using it, here is the screenshot:
Under this situation, when I open Window Media Player, this problem will occur:
I am sure that my sound drivers are working properly:
When I use Windows Troubleshooting function, here is what I discovered (Ignore the Bluetooth):
I am not sure about what is "Hardware changes might not have been detected", but after running Troubleshooting, my laptop have sound back, however, after about 30 minutes, my laptop will become no sound again, and I need to run Troubleshooting again and again to solve the problem. how to solve the problem completely so that I do not need to run Troubleshooting again and again?
I've bought an HDMI cable to connect my laptop to TV, i've gone into the control panel and checked that "show disabled devices" and "show disconnected devices" are both allowed and still i dont seem to get an option for HDMI for audio. The picture has come through fine, but nothing I do with the audio seems to work.
View 6 Replies View RelatedI have the laptop as stated above, i have had it a week and the user before me had decided to put on 7 instead of 8. i completely wiped and restored to windows 8.1, installed all sammy drivers and ensured it is all up to date.
the laptop had huge instability issues, the hdd was on its way out as mbr was damaged and the heads were ticking badly. then i found the ram was not secured in the sockets properly too. so i fixed it all!
Anyways back to the problem. i have the realtek hd audio drivers installed from sammy, reinstalled the ones from realtek themselves and still nothing.
Main issue, mic and speakers built in work and are fully detected. but the microphone port and headphone port are not detected, no matter what i plug into them.
I have been having sound problems with the speakers on an HP Ultrabook. There are times when the laptop speakers stop working. When this occurs, I go to Control Panel>Sound, select the speakers(only one set to select), select Configure and Test. After selecting Test, I receive the message Device In Use. The device is being used by another application. Please close any devices that are playing audio to this device and then try again. I've gone to Properties for the speakers, Advanced tab and unchecked option "Allow applications to take exclusive control of this device". I've also used Run sndvol to try to determine the application, but it only shows Device:Speakers/HP and Applications:System Sounds.
The only way I've been able to get the speakers to work is to reboot or disable and enable the driver for the IDT High Definition Audio CODEC.
I get the error attached.
However, devices show up in device manager.
When I try to re-install the driver from the dell site, the installation fails. Here is the error log:
[05/29/13 12:32:09] Update Package Execution Started
[05/29/13 12:32:09] Original command line: "C:UsersCathleenDocumentsDell Downloads9ef71118-f3dd-4d85-90ac-914583774eb1Audio_Driver_G22H1_WN_6.0.1.6662_A01.EXE"
[Code]....
I installed windows 8 on my PC 3 days back. The problem i am facing is that it's sound is not working. I heard we don not need to install additional software to make sound working. But this is not working in my case.
View 1 Replies View RelatedI been having issues with my Ativ Tab 3 so I shipped it back to Samsung to fix it. Before I shipped it, It always played the sound that indicated that a bluetooth device was connected. After receiving it, I noticed it had fresh copy of Windows 8 pro on it with drivers, etc. So I updated it to 8.1 and reinstall everything and noticed the bluetooth devices no longer play the sounds when they connect.Tried refreshing, sfc /scannow, and redoing audio drivers.
View 2 Replies View RelatedBasically I have an ASus ux301la (zenbook infinity) and i noticed that after installing Displaylinks software (port replicator software) my default sound device was called (USB AUDIO) and that my Realtek sound device kind of went missing (no sound devices on the playback tab in the sound settings). I had no backups at teh time as its a new laptop and i really dont want to re-install 8.1 from scratch as it took me over a day to configure this thing to my personal config.
So I uninstalled the diplaylink software and uninstalled/reinstalled the sound drivers from the asus site and each time i did so it would create a new sound entry, hence all teh duplicates. Now i still have a problem because although sound works, i have to manually select the correct playback device in VLC player and I cannot see any sound devices in the playback tab on SOUND settings.
Until earlier today I could 'rewind' 15 seconds on the MS Music Control Panel. Having 'updated' the App this functionality has been lost. You can either rewind to the start or the end. You have to use the slider if you want to rewind less. For transcribing a multi-hour interview that is in .wma format this is now highly inconvenient.
How I can retrieve a 15 second shift button again?
Well, things went on until noon yesterday, but suddenly My PC takes no audio input or gives any output.
I have tried reinstalling driver, checking mute button, checking Cables etc, none of the audio devices work on my PC which work in other devices.
On opening realtek audio manager and playing auto test, Nothing plays, and going to control Panel -> Sound, and playing the test tone, I get this error:
Just as an additional info, I reinstalled AVG Internet Security 14 yesterday, and probably the audio was working till then. Once AVG was installed and the system got restarted, a system Update was triggered automatically, if that has got anything to do with my problem.
P.S. I could not use system restore as well, I get the following error:
Also, I come to know by googling that The Audio and System restore problems come in combos frequently.
...for SELECT programs? For example, I like to game with headphones on, I listen to music with headphones on and more. I don't like to unplug them every time I'm done, that's too confusing and more importantly, I FORGET ALL THE TIME. play my "Free Alarm Clock" through the speakers despite having headphones plugged in. I use it not only to wake up but also to remind me of other daily things.
I'm not looking for something to play sound through headphones and speakers simultaneously. That would defeat the purpose.
I have Windows 8.1 x64 and the following:
Radeon HD5450
Samsung TV connected via HDMI to graphics card
AMD HDMI High Definition Audio Device
Realtek HD audio
I have a strange problem that has not always been there but just recently if I don't have any sounds for about 5 minutes the HDMI audio seems to go into some sort of suspended mode and when I click on (generate) a sound (either system or music etc) it takes about 30 seconds for the sound to actually appear (manifest itself) through the Samsung TV speakers.
At first I thought it might be some conflict with the Realtek HD audio so I have disabled this (mobo built-in sound) in the BIOS and uninstalled the realtek drivers. This did not work.
I then thought it was probably an update to the Sound drivers or the graphics drivers for the ATI / AMD Sound card. I have installed the latest catalyst drivers and this did not work. I then fully uninstalled the catalyst drivers including the HDMI Audio and installed an earlier version 9.2.00 from 2012. This did not work either.
The only Playback Audio Device I have in the Sound settings is Digital Audio (HDMI) and I have tried disbling all audio enhancements. This did not work.
Please note that this happens even if I am using the computer (i.e. the screen can be on all of the time and it still happens after a few minutes).
Other things I have tried:
Power Config - disabled Link State Power Management for the PCIe card
One think I have observed (and I am not sure if this is a symptom or a cause) - The "Windows Audio Device Graph Isolation" process uses about 3-4% CPU while the 30 seconds or so elapses between the sound being invoked and it playing through the speakers. the rest of the sstem is relatively in idle. I can reproduce this by clicking on the sound and adjusting the volume a tad. It is meant to make an immediate "bing" sound to show the sound level is clicked or changed.
If I wait the 30 seconds then the sound eventually comes and then if I click on it again (or do other sound related things) then the sounds are instantaneous. Its only of I leave it 5 minutes or so with no sound activity. If I wait, say, 2 minutes the sound is instant too so long as their has been a sound event in the prior 5 minutes or so.
Recently upgraded my Dell Latitude E6420 to Windows 8.
When I attempt to use my Sony TV as a second monitor via HDMI cable, I no longer get audio. Cable is fine and worked previous to upgrade.
Video comes up fine. In "Playback Devices" (with both "Show Disabled" and "Show Disconnected" devices checked), Digital Audio is greyed out and unable to be selected as a default device - simply says "Not plugged in".
I've tried updating various drivers, but to no avail.
Display adapters:
Intel(R) HD Graphics 3000NVIDIA NVS-4200M
why my audio goes every time I plug in my mouse or external hard drive into one of the usb ports. The only way I can get audio back is by restarting the computer.
I'm running Windows 8 on ASUS UX32VD.
I've gone into Sound settings, Communications tab, and selected Do Nothing.
Last night I restarted my computer and for some reason when I booted it back up I was not able to use my headsets sound. I went through the settings disabling audio drivers and nothing worked, I also tried to change the default audio device but that wouldn't work either. For some reason I can't change any audio settings when i press OK and open back up the windows the settings are the same.
The thing that puzzles me that everything was working fine until I restarted my computer. I am also confused why windows won't let me change my default audio device under the playback devices menu.
Details: Headset: Turtlebeach P11's
I have a windows 8 laptop and today the sound just stopped working. The windows audio service will not enable and everytime i try to enable it fails due to a duplicate in Windows Audio Endpoint Builder.
Now tricky part is i cant open control panel as it doesn't load, i tried reinstalling windows 8 but it also not load. This all was working perfectly just earlier today. I have no sound, just an x by the sound.
When I watch YouTube videos I get random stutters where the sound skips. The image doesn't seem to freeze though, just the sound
I also get issues with the sound streaming music online, where it pauses for a second and stutters even though it's not buffering.
When this happens, NT Kernel & System shoots up in task manager and uses more CPU than the browser. This by the way happens in every browser, IE, Chrome or Firefox.
It doesn't happen when playing music in iTunes or watching videos from my hard drive.
That being said I'm not posting about a buffering type stutter, I am aware of that and this is not it. This is like basically suddenly the computer has a big spike in memory or cpu usage and the video/sound clip stutters for a sec. But it happens often enough to be very annoying. In a 15 min YouTube clip it happened 10 times.
I have reinstalled my IDT High Definition Codec and my Intel HD Graphics 4000 driver, but still the problem persists.
I keep getting BSODs after building a new PC and installing Win 8. The error I am getting from my Intel event log says: 2000 Error communicating with WLAN device.
I have tried uninstalling and reinstalling the WLAN drivers but am not having any luck. I have found newer driver versions but none of the driver installs take now. Seems like the driver that was installed is now corrupt, or parts of it are lingering. When I uninstall the device and driver from Windows (cause I don't need it), Windows finds it when auto scanning for hardware and then I get another BSOD.
The ethernet device that seems to be having the issue is a Killer e2200 built into my MSi Gaming 5 Motherboard.
i get no audio in any games, Youtube, Twitch, etc. I get audio on skype but thats it. I checked my device manager and it says all audio devices are working properly. I checked for driver updates and found none. I have a Dell XPS 8700.
View 2 Replies View RelatedI just got a BSOD. It happened while i was in a Skype call, listening to music, and about to go into match of League of Legends.
I've actually been getting quite a few of BSOD lately. The one I got before this one was
Kernel_Security_Check_Failure. Which I also got today.
I only seem to get BSOD when I have a sound card installed into my computer. I even bought a new sound card in hope to maybe fix this problem but I still get it. I've tried a few things too, I've even replaced my ram. I actually thought it was my AMD motherboard at first so I completly replaced my mother and cpu to a intel cpu and motherboard and still i get BSOD. The only thing I have not changed out has been my 2 Graphics cards and my SSD. But I didn't start getting BSOD till i either got my SSD or got more ram, I can't remember which. But like I said, I've already completely changed out my ram.
I'v been trying to get my new USB sound card (Roland Duo Capture EX) working with Pro-Tools 10, but when I choose the Roland as the playback engine on starting up ProTools, I get an error stating that it is in use by aother application.
Also, when I change the sample rate in the "Sound" window for that sound card, I get the following: "The Device is being used by another application"...
Is there some way in Windows 8 to check what applications are hogging the card?
The device is manufactures by Quallcom Atheros and the device manager has a yellow sign with the following message:
device cannot start (code 10) object path component was not a directory
Tried to update drivers but they are updated. Drivers listed in the device manager are all in C:windowssystem32drivers ...
I keep getting this error in device manager:
Driver Management has concluded the process to add Service HdAudAddService for Device Instance ID HDAUDIOFUNC_01&VEN_8086&DEV_2806&SUBSYS_80860101&REV_10004&36B8CB0&0&0301 with the following status: 0.
All Audio devices that I use regularly are all working fine I just don't like seeing any kind of error
The device status on main page says: This device cannot start. (Code 10)
{Operation Failed}
The requested operation was unsuccessful.
Tried reinstalling drivers but nothing seems to work
I've installed Microsoft Windows 8.1 Version 6.3.9600 Build 9600 on my HP 430 Notebook PC with 1 GB RAM and Pentium CPU @ 2GHz 2 Cores.
Display drivers are not working properly (i.e., everything appears bigger and unclear), earlier I'd successfully updated the display drivers and made it work using Device Manager. making a backup of the drivers (may be in .inf format) from the installed drivers so that I don't have to update it every time I re-install it.
while going through my device manager, a yellow triangle sign caught my attention. It is under the "Sound, video and game controllers' labeled as 'Bluetooth Audio Device". When opening the properties, it says that "This device annot start. (Code 10) Object Path Component was not a directory object.
I went to the MSI website (The laptop is a 4 days old MSI GS70-229) and could not find the corresponding driver for this so called "Bluetooth Audio Device". Windows update was unable to find anything, and the "Roll Back Driver" button was disabled. Driver provider is Qualcomm Atheros Communication.
It's definitely not a hardware problem as one minute it's all working, then it suddenly stops. I've tried everything. My sound card drivers are all up to date, it also happens at the same time as youtube videos stop playing on google chrome (despite them loading), windows media player is unable to play and an error occured on youtube on firefox.
However after a few hours it finally lets me on the "configure speakers" setting and I click test and it begins to play sounds again, from then on it plays sound and loads videos.
Edit: When I click "test" it tells me "The device is being used by another application. Please close any devices that are playing audio to this device and then try again."