WLAN Extensibility Module Has Failed To Start
Aug 4, 2013
I have bought a new wireless adapter as my old one had very poor strength and I am really impressed with the signal on this one but after a while it disconnects and then it says there are no available connections. I have to restart the adapter to get it to work again.
If I am gaming online and this happens it's not very useful and I could really do with fixing it.
The adapter is the TL-WN822N by TP-Link.
I have checked the compatibility on the vendor list and it is compatible. I installed the drivers off their website which were 64bit.
I am running Windows 8 64bit.
View 3 Replies
ADVERTISEMENT
Nov 9, 2013
I keep getting this error msg in Event Viewer on my Lenovo IdeaPad Flex 14... What they are and how to resolve them?
WLAN Extensibility Module has stopped.
Module Path: C:WINDOWSSystem32IWMSSvc.dll
View 1 Replies
View Related
Apr 13, 2013
I'm trying to register the .ocx's mentioned above.I first put the .ocx's in the windows/system32, and thereafter ran the regsvr32 command in cmd (as an administrator). I also tried to register them from the windows/SYSwow64. (I run x86).
However, I get the following error for both of the attempts:
The module ".ocx" failed to load Make sure the binary is stored at the specified path or debug it to check for problems with the binary or dependent .DLL files.
The specified module could not be found.
View 9 Replies
View Related
Oct 30, 2013
I have two operatings systems. Windows 7 on one drive and Windows 8 on the other. I have a program called PowerDirector 11 installed on the Windows 7 drive. I went to install the said program on the Windows 8 drive, (to be able to access it from either drive) and when I try to open or run the .exe, I get the error "The application has failed to start because the side-by-side configuration is incorrect.
View 3 Replies
View Related
May 15, 2014
I keep getting this error in device manager:
Driver Management has concluded the process to add Service HdAudAddService for Device Instance ID HDAUDIOFUNC_01&VEN_8086&DEV_2806&SUBSYS_80860101&REV_10004&36B8CB0&0&0301 with the following status: 0.
All Audio devices that I use regularly are all working fine I just don't like seeing any kind of error
The device status on main page says: This device cannot start. (Code 10)
{Operation Failed}
The requested operation was unsuccessful.
Tried reinstalling drivers but nothing seems to work
View 1 Replies
View Related
Apr 21, 2013
I have Windows 8 64 bit installed on a new Hp h8 1360t . On each restart I get this error.
"PKU2u log failed to start with the following error: 0xc0000035".
The results of my searches to resolve this error has been minimal to say the least.I have run sfc/scannow and a chkdsk /r with no positive results. how to correct .
View 5 Replies
View Related
May 15, 2014
Issue Details: AODDriver 4.2.0 service failed to start - The system cannot find the specified file. This from Event Viewer:
- System - Provider [ Name] Service Control Manager [ Guid] {555908d1-a6d7-4695-8e1e-26931d2012f4} [ EventSourceName] Service Control Manager - EventID 7000 [ Qualifiers] 49152 Version 0 Level 2 Task 0 Opcode 0 Keywords 0x8080000000000000 - TimeCreated [ SystemTime] 2014-05-15T13:36:25.744249100Z EventRecordID 95248 Correlation - Execution [ ProcessID] 616 [ ThreadID] 620 Channel System Computer Desktop Security
- EventData param1 AODDriver4.2.0 param2 %%2 41004F00440044007200690076006500720034002E0032002E0030000000
Binary data:
In Words
0000: 004F0041 00440044 00690072 00650076
0010: 00340072 0032002E 0030002E 0000
In Bytes
0000: 41 00 4F 00 44 00 44 00 A.O.D.D.
0008: 72 00 69 00 76 00 65 00 r.i.v.e.
0010: 72 00 34 00 2E 00 32 00 r.4...2.
0018: 2E 00 30 00 00 00 ..0...
Uninstalled AMD software and drivers normally. Installed older or latest AMD software, and it is still there.I have completely uninstalled all AMD software using the AMD cleanup utility. I have installed the previous version 13.12, but the error still appears. Strangely this error was not there prior to installing 14.4, but now it is there using 13.12 even though the AMD cleanup utility was used.So nothing seems to clear this except to uninstall all AMD software using the cleanup utility.When no AMD software is installed there is no error (obviously!).
However, when subsequently installing any AMD graphics software the error returns.
Graphics Card
Radeon HD 6450
AMD Catalyst Driver Version, and Driver History
14.4, previous 13.12, and all previous Catalyst software for many years.
Operating System
- Windows 8.1 Update 1 Pro 64-bit.
[Code].....
View 5 Replies
View Related
Apr 22, 2014
I'm trying to install Visio Pro 2013 on my Windows 8.1 business laptop running Office 365. This is a new PC so the only things installed on it are 64 bit versions of Office.
When attempting to install, I get an error that the Office Extensibility Component is a 32 bit Office piece. I've tried to uninstall this component on my personal PC and it rendered Office 365 unusable. I had to perform a System Restore to get it working again. I don't want to attempt this on my work PC.
32 Bit Office has never been on this PC. How did the Component get here?
How can I safely install Visio 2013 Professional?
Couldn't paste error message into screen, so I attached a file image.
View 1 Replies
View Related
Sep 15, 2014
Since yesterday I have noticed a delay during the welcome circle loading screen after login. Then I checked the event viewer and found out that I get around 15 errors of the same event ID 131 which contains the following details:
Log Name: Microsoft-Windows-DeviceSetupManager/AdminSource: Microsoft-Windows-DeviceSetupManager
Date: 9/13/2014 1:07:25 AM
Event ID: 131
Task Category: None
Level: Error
Keywords:
[Code] ....
I have not done any hardware changes and why these error suddenly started to show up. Just to clarify, I have tried the following troubleshooting steps:
Ran the following commands:
sfc /scannow
DISM.exe /Online /Cleanup-image /Restorehealth
net stop wuauserv
ren SoftwareDistribution SoftwareDistribution.old
net start wuauserv
finally, I also tried running the "Windows Update Diagnostics Tool"
SF diagnostic logs attached
View 9 Replies
View Related
Jun 16, 2013
This is reg uICE (Universal Infrared Control Engine). After installing in my Win 8 64-bit machine whileI try to launch it, I am getting the error-- The task monitor failed to start.reinstall uICE. Error: The service has not been started.
Reinstalling did not work. Nor did compatibility mode installation. Basically uICE declined to start in my Win 8 64 bit. Please note that this program worked fine on my previous 32 bit version of Win 8.
Is there a way to make it work on my PC? Alternatively you can suggest me some other programs like uICE to remote control multimedia applications like WMP, VLC player, Winamp etc?
View 4 Replies
View Related
Sep 30, 2013
This the error message I get : Windows failed to start. A recent hardware or software change might be the cause. To fix the problem:
1. Insert your windows installation disc and restart your computer.
2. Choose your language settings, and the click "next".
3.Click "repair your computer".
If you do not have this disc, contact your system administrator or computer manufacturer for assistance.
File: BootBCD Status: 0xc0000001 Info:
The best configuration beta for your PC is missing or contains errors.
I have tried all the recovery options using windows 8 iso DVD - none worked
Also I did create "Windows 8 Repair Disc at the time When I upgraded from Windows 7. I tried it too - with no result.
Note: I upgraded using windows assistant.
View 9 Replies
View Related
Feb 19, 2014
I'm getting this message since my most recent update on Windows 8.
RunDLL error"The specified module could not be found."
My iPhone and iPod devices are also not appearing in iTunes when connected to my computer.
View 1 Replies
View Related
Apr 12, 2014
Is it necessary to disable CMS in the bios to fully utilize a UEFI install?
I'm getting conflicting messages from what I am reading, probably.
View 8 Replies
View Related
Jun 30, 2013
Whenever I turn on WLAN in my router, the whole network suffers from an incredible latency. No online game is playable, but the download speed itself is not being touched (i.e. fullspeed) and websites load - even if they're a bit slower, it seems. Once I'm switching WLAN off, it is all back to normal again.
I have really no clue about the source of this evil and due to the nature, it's actually hard to google, as you'd only find problems of people that have high latency over the WLAN devices. I'm experiencing all this stuff on my normal LAN PCs as well, though.
Here's a result from an online ping test with an american server. so, no packet loss.
--- xxx.xxx.xxx.xxx ping statistics ---
20 packets transmitted, 20 packets received, 0.0% packet loss
round-trip min/avg/max/stddev = 108.842/1149.351/2727.156/878.843 ms
View 1 Replies
View Related
Feb 20, 2013
Computer: Samsung 530U, NP530U3C-A07SE
So we got this computer brand new with Windows 7. We wanted Windows 8, and performed an clean install of Windows 8, manually formatting the partitions, meaning deleting of every recovery partitions and so on. Windows 8 booted fine, and everything worked fine, installed new drivers through Samsungs own "Windows 8 SW update"-software. Installed new updates through windows update, and everything seemed to work just fine.
But then, suddenly when the PC have been left alone for a while, and I think I can provoke the same issue by hibernate and start up again, the wifi can't connect to the wireless network, which the networks router could be found 1 meter aside. You then get the "network available"-symbol, and we can go on and try to connect to the network. The PC tries to connect for a while, and then it seems to just kill the wlan-card, like it has been disabled, and now the PC freeze. We now have to hard-reboot it, and wait for login, and then clean reboot it, and then again at login everything works fine. To the next time the PC have been left alone.
So the problem look like this; hibernation->wifi connection lost->wifi available->re-connecting to wifi->wlan-card disabled->PC freeze
What we have tried is to uninstall all wifi-drivers, install different drivers, from Samsungs site, windows pre-installed drivers, driver software-drivers and so on. Just to add, we also have this 7 series computer from Samsung, everything works fine.
View 5 Replies
View Related
Sep 15, 2014
I get an error showing specific module missing while trying to install MS Office 2013... I uninstalled older version using Microsoft fix it also..... Even that's is of no use... How to over come this error
View 2 Replies
View Related
Aug 5, 2013
It's a new HP laptop, the m6-1158. I purchased it about three months ago. When I got it, I updated the network card directly from Intel to the latest driver. When I started having issues around a month ago, I reinstalled the OEM driver from HP. When awaking my computer from its sleep, the network card would find my network but it would not connect. It would say, roughly, unable to connect. Eventually I can get it to work by deleting and re-adding the connection several times. The problem doesn't occur every time I awaken my computer, but maybe once every three times.
There have been some changes in my network. I added a wireless extender and set it up on the same SSID. I also changed my wireless security from WPA/WPA2 to just WPA2. I have seen the same problem occur on another Windows 8 laptop in my network.
When running Intel's WiFi troubleshooter, it fails on the association test.
Every time the connection fails, I get the following error in Event Viewer:
Code:
Log Name: SystemSource: Microsoft-Windows-WLAN-AutoConfigDate: 2013-08-06 12:29:41 AMEvent ID: 10002Task Category: NoneLevel: WarningKeywords: User: SYSTEMComputer: [Name]-PCDescription:WLAN Extensibility Module has stopped.
[Code] .....
These are my system specifications:
Code:
<<< System Summary >>> > Mainboard : HP 18A5 > Chipset : Intel Ivy Bridge > Processor : Intel Core i7 @ 2200 MHz > Physical Memory : 8192 MB (2 x 4096 DDR3-SDRAM ) > Video Card : Intel(R) HD Graphics 4000 > Hard Disk : Hitachi HTS541010A9E680 (1000GB) >
[Code] ......
View 2 Replies
View Related
Jan 14, 2014
my WLAN Autoconfig, windows keeps telling me that the service isn't running - I've noticed when I run Services.msc that it's usually not on, so I start it up which seemed to have solved the problem yesterday but today - not so much...
So now it's not showing visible wireless networks (all working fine on the network with other pc's on xp), doesn't seem to respond to going into flight mode etc.
All drivers are up to date for the laptop (it's probably only a couple of months old).
View 9 Replies
View Related
Jul 26, 2014
I keep getting BSODs after building a new PC and installing Win 8. The error I am getting from my Intel event log says: 2000 Error communicating with WLAN device.
I have tried uninstalling and reinstalling the WLAN drivers but am not having any luck. I have found newer driver versions but none of the driver installs take now. Seems like the driver that was installed is now corrupt, or parts of it are lingering. When I uninstall the device and driver from Windows (cause I don't need it), Windows finds it when auto scanning for hardware and then I get another BSOD.
The ethernet device that seems to be having the issue is a Killer e2200 built into my MSi Gaming 5 Motherboard.
View 9 Replies
View Related
Mar 23, 2013
Windows 8 64. To date all my networking needs are just fine
Though I do have just one last loose end to tie up with the adhoc wifi it just fails after sleep.
View 1 Replies
View Related
Oct 29, 2013
I have a 'HP Envy m6-1158ca Notebook PC' running Windows 8 Pro and everything was good until I upgraded to Windows 8.1 Pro.
Immediately after that, it failed to recognize my second monitor (HP Pavilion 23fi 23-inch Diagonal IPS LED Backlit Monitor). I restarted several times assuming OS should recognize that. Device Manager did not show any driver for that new monitor.
Did a hardware troubleshooting and it found some errors. I rebooted the PC and now NOTHING SHOWS UP IN THE SCREEN. JUST A BLANK SCREEN!
After spending hours, I could not do anything. Finally with the support of HP customer service, I was able to access HP recovery mode (F11) and went back to default OS (Windows 8). Lost my data (was not able to backup a lot) and now having all other issues! By the way, F8 or Shift+F8 did not boot in safe mode.
Now every time I restart, it takes forever and randomly removes different drivers (audio etc.)! I now have two OS (Windows 8 and a recovery OS) and don't know how to remove that!
My question is what could happen when I upgraded to Windows 8.1 Pro? Everything was great before that upgrade.
View 5 Replies
View Related
Mar 25, 2013
I was getting repeated blue screens of death. My laptop would crash and then restart only to crash again within 2 minutes, this just kept happening. So I figured I would just factory reset my laptop because it should have a recovery image on it since there is no optical drive. The factory reset failed at 64%, so I did it again and it failed in the exact spot again. Now the computer won't boot up. It says automatic repair which ends up failing and it gives me 2 options to either shut down or go through the advanced options. Is there anyway I can download windows 8 onto an external drive and install it like that? I have no clue what to do at this moment.
View 3 Replies
View Related
Jan 23, 2013
i have tried to active my Windows 8 pro 64 bit but couldn't .
Already i used the method of below :
8 Professional KMS key from .)Code:
slmgr.vbs -ipk <>slmgr /skms <KMS SERVER>slmgr.vbs -ato
1st step is done successfully
2nd step is done successfully
but 3rd step ( as slmgr.vbs -ato ) it's failed as mentioned on below image
.227547532.png
View 9 Replies
View Related
Oct 26, 2013
I had windows 8 pro+wmc installed in my Lenovo laptop (actually an upgrade from windows 7 OEM, upgraded to windows 8 by Lenovo maintenance team when there was some trouble with the hdd!); later I got it activated successfully (phone activation); I have the activation detailes and also copied the sacrosanct windows/system32/spp/store folder for future reactivation.
This laptop had winxp and Linux installed as first and second partitions and the third partition was the windows8; the boot manager was grub; yesterday I found that the freeupdate for windows 8.1 is now back in the store; so I thought of increasing the size and backing up the existing windows8 image in case of any problem; so I deleted the Linux snd xp partitions totally and edited the bcd (using bootice) so that the machine boots correctly; so now the first partition is a large data partition where I intended to copy the windows 8 which is now in partition 2;
When I rebooted the machine today, I got the activation error message! since I have the product key, product id and also the activation code, I thought I can copy the store folder or worst come, I can redo the phone activation; I first copied the store folder as generally suggested by the "activation backup procedure; ' when I restarted the machine, it was a no-go as the activation error is persisting;
I attempted phone activation, the key was first accepted and when the product id (the nine fields) was generated, I found it was different from the one I have copied earlier; still I entered all the fields properly and then after playing music for sometime before generating the activation code, the message came "your request cannot be processed now"; I again tried after an hour I got the message saying the key is blocked!
How I get back the activation?
View 2 Replies
View Related
Apr 30, 2014
I dualboot Windows 8 & XP, this morning Windows 8 did not boot normally but, in a very restrictaed way reminisent of the XP "Safe Mode", with the error icon saying
" HD problem" back your files, pls see attached.
I recycled the HD cables rebooted Windows 8 several times with the same, then booted in XP & all worked fine, no problems reported, even FSX worked.
Asus P5K Premium WiFiiFi Intel Core 2 Quad Pro 2.4GHz, OCZ Vendetta Cpu Cooler, 2x2GB, DDR2 800 PC2-6400, GeForce 9800 GTX (PCI-E), sata 500gb Seagate Barraguta HD , Corsair 750M Psu, X45, Dual boot Windows 8 64 & XPhome sp3.
View 2 Replies
View Related
Jun 11, 2014
Win 8.1 trying to install dragon naturally speaking pro 12
Installation fails : "MSXML 4.0 SP2 failed to Install"...
View 6 Replies
View Related
May 7, 2014
I got this Gateway this last year, and in the "store" it says to upgrade to 8.1, and I have tried and tried and it says that the download has failed, and cannot install. I have called microsoft support, and was on the phone with them for a couple of hours, and he escalated support to the engineers, they also called, and I allowed them remote access, to come to the conclusion, that my connection is too slow to upgrade to 8.1. So, I went to an open network and tried it, to no avail.
View 14 Replies
View Related
Mar 17, 2013
I Activated back in November Win 8 Pro with a MAK key first, than WMC with the promocional key by M$. Didn't use Advanced Tokens Manager at that time, but copied and saved: Store & Token folder in Windows/system32/spp.
I made I Windows 8 Pro WMC iso and integrated the promocional key and placed Store & Token folders to install.wim. Burned ISO to DVD and installed windows to the SAME PC where I had activated Windows 8 Pro WMC before.
At first startup windows system properties showed: Activated. I run slmgr.vbs -ato just to see what happens and got an error: 0xc004c400 on a computer running windows non-core edition, run slui.exe 0x2a 0xc004c400 to display the error text.
After that Windows is not activated any more. Did I do something wrong or is it because of the MAK key I used to activate Win 8 Pro?
View 9 Replies
View Related
May 28, 2013
So I've been trying to update my graphics card. Before I ever got the notification for the update and tried to install it, I could play minecraft, and star craft, and watch Netflix video. When I did install, and was given the failed due to I/O error box, I couldn't play any games or watch any Netflix. Don't know what to do to fix this. Since, I've gone to my manufacturers website and re-installed my driver, but I think the real problem is seeing how I cant connect it. It always says it failed due to the I/O error, so I cant connect it to the video card or something.
My computer is a Toshiba. other info:
Model: Satellite L875DProcessor: AMD A6-4400M APU with Radeon(TM) HD Graphics 2.70 GHzPlenty of RAM (only 5 month old computer)
In Device Manager under Display Adapters It says Microsoft Basic Display Adapter. I just need to know how to change it. I've gone in through device manager, pressed update driver, chose to do it manually and choose a signed driver. When I choose My AMD Radeon Drive and it attempts to install, it always says it failed due to an I/O error. This has been going on for a week or so, and I thought I could fix it, but nothing works.
View 6 Replies
View Related
May 13, 2014
I have a Seagate GoFlex 1 Tb USB 3.0 drive. All worked good until a week or two ago. Now the drive will not be recognized when plugged into a USB 3.0 port, the error given is "Unknown USB Device (Device Failed Enumeration).
If I plug the GoFlex drive into a a USB 2.0 port, it works. I can plug USB 2.0 devices into the USB 3.0 port and they work. I just can't plug my USB 3.0 drive into a USB 3.0 port and get it to work.
I have tried uninstalling the Unknown USB Device in Device Manager. I've also uninstalled all other instances of it failing to be recognized.
My motherboard has a VIA VL805 USB controller. I've used the drivers on Gigabyte's site and I've used VIA's drivers, no difference. I have the latest BIOS for my motherboard.
The drive does not show up in Disk Management when plugged into a USB 3.0 port. This shouldn't be a surprise since the device is unknown in the Device Manager.
I thought the problem might be with the USB 3.0 cable or the GoFlex drive's USB interface. So I bought a new USB 3.0 docking station and...same problem. The new docking station also fails enumeration. Basically what it boils down to is a USB 3.0 storage device will not be recognized in a USB 3.0 port. But they work when plugged into a USB 2.0 port.
View 7 Replies
View Related
Jul 19, 2014
All of a sudden, after installing some software updates, Ubuntu tells me to restart. I restart, load Ubuntu perfectly, then decide I want to use Windows to play a game. Restart, select Windows partition in Grub. The Toshiba logo comes up, as usual, but it doesn't boot into Windows. The scrolling wheel just keeps turning. I go to BIOS, and try enabling secure boot, to see if I can boot Windows like that. Same problem. Go to BIOS a second time, change the boot type to CSM instead of UEFI, to see if that will work. It comes up as a black screen "Failed to load media". I switch it back to UEFI and disable Secure Boot. Now all of a sudden, Grub doesn't come up, it just goes straight to loading Windows, but same problem. I ran Boot Repair from a live USB, didn't work.
I am able to use Ubuntu now, but only by pressing F12 and selecting it. Windows still won't boot. I made a recovery USB, and I tried to refresh my pc but it said drive was locked. I don't know what to do.
Here's my Boot Info: Ubuntu Pastebin
I have a Toshiba Satellite.
View 9 Replies
View Related
