Network / Sharing :: WLAN Autoconfig Service Not Running - Windows 8
Jan 14, 2014
my WLAN Autoconfig, windows keeps telling me that the service isn't running - I've noticed when I run Services.msc that it's usually not on, so I start it up which seemed to have solved the problem yesterday but today - not so much...
So now it's not showing visible wireless networks (all working fine on the network with other pc's on xp), doesn't seem to respond to going into flight mode etc.
All drivers are up to date for the laptop (it's probably only a couple of months old).
It's a new HP laptop, the m6-1158. I purchased it about three months ago. When I got it, I updated the network card directly from Intel to the latest driver. When I started having issues around a month ago, I reinstalled the OEM driver from HP. When awaking my computer from its sleep, the network card would find my network but it would not connect. It would say, roughly, unable to connect. Eventually I can get it to work by deleting and re-adding the connection several times. The problem doesn't occur every time I awaken my computer, but maybe once every three times.
There have been some changes in my network. I added a wireless extender and set it up on the same SSID. I also changed my wireless security from WPA/WPA2 to just WPA2. I have seen the same problem occur on another Windows 8 laptop in my network.
When running Intel's WiFi troubleshooter, it fails on the association test.
Every time the connection fails, I get the following error in Event Viewer:
Whenever I turn on WLAN in my router, the whole network suffers from an incredible latency. No online game is playable, but the download speed itself is not being touched (i.e. fullspeed) and websites load - even if they're a bit slower, it seems. Once I'm switching WLAN off, it is all back to normal again.
I have really no clue about the source of this evil and due to the nature, it's actually hard to google, as you'd only find problems of people that have high latency over the WLAN devices. I'm experiencing all this stuff on my normal LAN PCs as well, though.
Here's a result from an online ping test with an american server. so, no packet loss.
--- xxx.xxx.xxx.xxx ping statistics --- 20 packets transmitted, 20 packets received, 0.0% packet loss round-trip min/avg/max/stddev = 108.842/1149.351/2727.156/878.843 ms
I can no longer access the internet from my other laptop.
When I boot up it says "Failed to connect to a windows service".
I believe that the computer cannot locate my wireless card.
I am told that there are no available connections.
When I try to open Network and Sharing Centre, it crashes.
There are no exclamation makes in Device Manager and everything else seems to be working ok.
I just cannot find any networks and appears to be something to do with my wireless card - which has worked perfectly until yesterday when I turned on my laptop and found this problem.
I am having issues with my clients. Every time they logon, the information won't go through the PC client and load up. I get this problem in the image below.
What has happened is that when I first started up my laptop this morning, it seems the audio is disabled. Along with this, the wireless connection is also disabled. Windows attempts to fix both of these problems, but only fixes the wireless. I've restarted multiple times to no avail, and each time, the wireless connection must be fixed by Windows. I've had this laptop for about a month, nothing has ever gone wrong.
when I go on Youtube, every video I attempt to watch stutters around for the first few seconds and/or goes directly to an error screen. I'm sure this has to be something with flash or something in general, considering it just started occurring with these other problems. I'm hoping I won't have to backup files and restore the laptop to the factory default, I was an idiot and deleted the only system restore point I had from a few days ago. I completely forgot system restore points only effect installed programs and Windows files.
Here is some more specific information towards my audio problem -
This is what happens when I attempt to start Windows Audio in Services.
Noticed that Microsoft Security Essentials had not received definition updates in 5 days. Tried to update manually through MSE interface and could not connect to server. Tried to find updates using Windows Update and received an error that the Windows Update Service failed to load and need to re-start.
Restarted - No results
Went to Administrative Tools > Services to restart the update service. - No Results
Downloaded the Fix-it from here: [URL] .... and these are the results.
Also, not sure if its related, but the startup sequence for my has been different for the last week. Below is the difference.
Normal Power On: Power on > Dell Logo > Peripheral devices power on > Windows Logo > Windows Login Screen
New (and strange) Power On: Power on > Dell Logo > Peripheral Devices power on > Windows Logo > Peripheral Devices power off and screen goes black > 5 second pause > Peripheral Devices Power On > Windows Login Screen
System Specs: Dell InspironOne2320 Win 7 Home Premium (SP1) Intel Pentium CPU G630 @ 2.70GHz x2 4GB RAM
In order to run Corel Draw X6 I need a service to run in the background, called PSI-SVC-2, also known as Protexis Licencing V2.
Under Task Manager/Services it's always default set to "Stopped". No matter how many times I set it to start automatically, it always resets to Manual after a restart.
Is there another tweak I need to make to have this particular service run on reboot?
Operating System: Windows 8.1 64-bit (6.3, Build 9600) (9600.winblue_gdr.131030-1505) Language: English (Regional Setting: English) System Manufacturer: TOSHIBA System Model: Satellite L875D BIOS: 6.10 Processor: AMD A6-4400M APU with Radeon(tm) HD Graphics (2 CPUs), ~2.7GHz Memory: 16384MB RAM Available OS Memory: 15836MB RAM Page File: 3383MB used, 14885MB available Windows Dir: C:WINDOWS DirectX Version: DirectX 11 DX Setup Parameters: Not found User DPI Setting: 96 DPI (100 percent) System DPI Setting: 96 DPI (100 percent) DWM DPI Scaling: Disabled DxDiag Version: 6.03.9600.16384 64bit Unicode
I have had my computer for a little under 2 years, and everything was fine until I updated to windows 8.1. Now every 5-10 minutes, my internet keeps changing from working fine, to saying Limited. Disconnecting and reconnecting fixes the problem for a few minutes. I am using several anti virus software as in AVG and McAfee, and they detect no problems. I have tried to troubleshoot the problem, and it works for about 2-5 minutes about half the time. The other half, it doesn't work at all. It takes about 30 minutes to do anything that would normally take about 15 minutes.
I'm having trouble keeping my lenovo laptop (running windows 8) connected to the internet. I have been able to connect successfully to multiple wireless networks and access the internet until I tried to connect to the new network.
Initially everything is OK - I can connect to the network and access the internet. However after a short period of time (anywhere from a few seconds to 20 minutes) the network connection will change to limited, without internet access. If I simply disconnect and reconnect to the network the internet will immediately be working again (at least for a few seconds/minutes).
Alternatively, if I run the troubleshooter, I always get the message that the default gateway is not available, which has been fixed by resetting the wi-fi adapter.
I have recently upgraded from windows 7 to windows 8 on my lenovo z470. Recently I have noticed that when I switch on my laptop with AC power (with battery removed), wifi does not automatically start up. I have to manually switch on the wifi through the hot key fn + F5. However, this does not happen if I run on battery without AC power. The wifi will have automatically started and connected. I have untick the network adapter properties of "allow the computer to turn off this device to save power. I have also ensured the WLAN AutoConfig is set to automatic.
OS: Windows 8.1 Pro Processor: AMD FX-1400 Quad Core RAM: 8.00 GB Storage: 1.73 TB of 1.81 TB available System Type: 64-bit Operating System, x64 based processor
A while ago, my PC was having some lag issues that made the computer practically unusable. I found out in msconfig that I had almost all services running. I disabled many of the services, and I made sure not disable the necessary ones (i.e, Windows Audio.) I restarted my computer and there was a red circle with a white "X" over the audio icon. I clicked on the icon. A window named "Playing Audio" opened. On the window was a bar similar to the one shown while loading/downloading something. Above the bar said "Detecting Problems" and then "Scanning for hardware changes...". This went on for about 10 seconds. After this, the window changed. At the top in blue was "Troubleshooting has completed". Under that was "The troubleshooter made some changes to your system. Try attempting the task you were trying to do before." In the center of the window was "Problems found-Hardware changes might not have been detected".
In the search bar, I typed "Manage audio devices". When I opened it up, the window told me that there were no audio devices installed. I have checked in Device management under "sound, video and game controllers" That I have sound drivers installed (AMD High Definition Audio Device & High Definition Audio Device.) I have tried multiple times to uninstall/reinstall the drivers to no avail.
Getting the limited connectivity problem when waking up my Toshiba laptop running 8.1. Having to reboot it every time I go to use it is getting old. Tried telling it not to shut off the wireless network car when going to sleep but that didn't seem to work.
So I've been having this problem for days now, two tasks named Service Host: Local Service(Network Restricted) and Service Host: Local Service(No Network) keep using up ALL of my cpu, theyre usually accompanied by any app I have open, so my task manager is basically like this for example:
Service Host: Local Service(Network Restricted) 40% cpu usage Skype 29% cpu usage Service Host: Local Service(No Network) 26% cpu usage
If I close skype, the usage goes down to 2 percent for a brief second and then any other app I have open launches up instead of skype and uses up all of my cpu.
I've tried several virus scans and I've done my best to clean up the system but I still have this problem
The other day I turned on my computer and my audio would not play. A small icon that resembles when the volume is muted is permanently displayed. When clicked, a window titled: "Playing Audio" opens and tries to troubleshoot the issue. It comes up with the following:
Problem found: One or more audio services isn't running. Not fixed
Both the Windows Audio and the Windows Audio End Point Builder services must be running for audio to work correctly. At least one of these services isn't running.
Potential issues that were checked:
Check audio device. Issue not present
My computer is a Sony Vaio, model number SVS1512DCXB.
All important original drivers and applications can be found here.
In case you can't retrieve any information on my computer, important information is as follows: 64-bit Operating System12 GB RAMWindows 8.1 Under my device manager, for Sound, Video, and Game Controllers: Intel(R) Display Audio Realtek High Definition Audio
I've already downloaded both the Realtek, but when I ran the program, it threw an Error message saying "Install Realtek Audio Driver Failure! Error -0001".
I'm setting up a new laptop running Windows 8.1. I keep finding the Windows Media Network Sharing Service keeps starting up when the PC is otherwise idle and running at 90% + CPU load for long periods. There is no demand for media streaming when the process is running.
What is this process for? Can I disable it or reconfigure it to reduce the CPU load?
As soon as I start an application (Cadence Allegro PCB Designer 16.5 but I don't think it's relevant) my CPU usage gets to the roof and stays there long after I killed the application and I believe I every associated process. The CPU usage is so high that the battery will be drained after about 45 minutes (It usually last about 3 hours).
According to my task manager the responsible is "Service Host: Local System (Network Restricted)". As a matter of fact, preventing the executable from accessing the network sort of solves the issue. I don't believe I need that executable to access the network but I'd like to understand what kind of network service can consume that much CPU (was actually affraid of overheating) and to know if there's a more appropriate way to solve this.
I keep getting BSODs after building a new PC and installing Win 8. The error I am getting from my Intel event log says: 2000 Error communicating with WLAN device.
I have tried uninstalling and reinstalling the WLAN drivers but am not having any luck. I have found newer driver versions but none of the driver installs take now. Seems like the driver that was installed is now corrupt, or parts of it are lingering. When I uninstall the device and driver from Windows (cause I don't need it), Windows finds it when auto scanning for hardware and then I get another BSOD.
The ethernet device that seems to be having the issue is a Killer e2200 built into my MSi Gaming 5 Motherboard.
I have bought a new wireless adapter as my old one had very poor strength and I am really impressed with the signal on this one but after a while it disconnects and then it says there are no available connections. I have to restart the adapter to get it to work again.
If I am gaming online and this happens it's not very useful and I could really do with fixing it.
The adapter is the TL-WN822N by TP-Link.
I have checked the compatibility on the vendor list and it is compatible. I installed the drivers off their website which were 64bit.
So we got this computer brand new with Windows 7. We wanted Windows 8, and performed an clean install of Windows 8, manually formatting the partitions, meaning deleting of every recovery partitions and so on. Windows 8 booted fine, and everything worked fine, installed new drivers through Samsungs own "Windows 8 SW update"-software. Installed new updates through windows update, and everything seemed to work just fine.
But then, suddenly when the PC have been left alone for a while, and I think I can provoke the same issue by hibernate and start up again, the wifi can't connect to the wireless network, which the networks router could be found 1 meter aside. You then get the "network available"-symbol, and we can go on and try to connect to the network. The PC tries to connect for a while, and then it seems to just kill the wlan-card, like it has been disabled, and now the PC freeze. We now have to hard-reboot it, and wait for login, and then clean reboot it, and then again at login everything works fine. To the next time the PC have been left alone.
So the problem look like this; hibernation->wifi connection lost->wifi available->re-connecting to wifi->wlan-card disabled->PC freeze
What we have tried is to uninstall all wifi-drivers, install different drivers, from Samsungs site, windows pre-installed drivers, driver software-drivers and so on. Just to add, we also have this 7 series computer from Samsung, everything works fine.
Is there a way to setup network profiles or something so that when I bring my Surface Pro to work and connect to the wireless network there it will use the static ip address I have but when I disconnect and then connect to my home wifi it will go back to DHCP? On my MacBook Pro I can go into the network settings and change the location profile I have setup for networks but I don't see anything like this for Windows 8.
I am trying to share a specific folder on my Windows 8 computer with my Windows 7 computer. They are both on the same network connected to the same router. The Windows 8 computer is connected through ethernet, while the Windows 7 computer is connected wirelessly.
Here are my settings on my Windows 8 Computer:
This is the error I get on my Windows 7 computer:
What's up with this? On a related note, is it possible to share this folder with a specific PC, rather than "Everyone" on the network?
I am having trouble with ICS on win 8. On my old laptop (win xp) I used to be able to share my 3Connect dongle internet to connect to Xbox live. I recently got a new laptop with win 8 and whenever I share this internet connection I can never connect on my Xbox (the network to internet part fails). When everything is connected up and shared the Ethernet says 'Unidentified Network' which i believe is the cause of the problem. I've read i may require a driver update but i cannot seem to find one.
My Laptop: Toshiba Satellite C855-29N
what to do, maybe i am not setting up the connection sharing properly?
I've been trying to set up an old Savin 9033 printer through the company's router, but I couldn't find the network it's set up on from any other computer.
So I pull up Network & Sharing, see that Network Discovery is turned off.
I check it, go to click on "Save Changes" and nothing happens. I click it a few times and it kicks me back to the previous page, nothing saved. No password prompt or anything.
I double checked that all the appropriate services are running (DNS Client, SSDP Discovery, UPnP Device Host, Function Discoveryr Resource Publication, etc.) and made sure Network Discovery was allowed through Windows Firewall.
This morning I installed an optional update from Windows Update. It was Ralink Technology WLAN 802.11 wireless LAN card.
Since then, when I try to print to my wireless network printer, the network would disconnect then come back on after a while. The update shows up in Update History as successfully installed but not in the installed updates. System restore is of no support here. The network configuration page shows normal. The web does not appear to be affected. I made a new network connection for the printer but it did not work.
Is there a way to reverse this update or should I uninstall the 802.11 LAN card and let windows re-install anew.
First let me say, I rarely leave my 8.1 system running all night as I generally switch off before bed.
On the FEW occasions I leave the system running all night I always get the "Your computer is low on memory" warning.
For instance, yesterday my software RAID mirror was "Re-synchronizing" and I wanted it to complete syncing so I left it running. NOTHING was running except Disk Manager. I closed down everything else. No browser, no Skype, no directory utility, no paint, no uTorrent....
Sure enough when I woke up this morning there it was....
A few days ago I wanted a couple of torrents to keep downloading so I kept the desktop running. Again NOTHING else was running and in the morning there it was....
I have 16Gb of memory and my pagefile.sys is 42Gb. My OS disc is a 250Gb SSD. I have set my system to hibernate after 5 hours idle. I have set the screen/display to sleep after 30 minutes.
The system isn't asleep when I wake as moving the mouse immediately brings the display back on line. Checking Task Manager shows NO memory hogs.
What I suspect is after 5 hours the hibernation process denies access to memory requests or something?
The strange thing is millions of people on 8.1 must leave their systems running all night but I have seen no mention of this behaviour.
I am trying to get file sharing to work with my win 8 machine and my OS X Server. The computers are on the same network with the same workgroup but I can't seem to connect. I was able to connect with the wife's win 7 home machine until I upgraded it to win 7 Ultimate now it wont connect either.
Okay, so in Windows 7 I am able to connect my wireless to my phone, and run an ethernet cable over to my Xbox. If I use the ICS feature and configure it under services to allow ports 88 and 53 UDP, it works fine. This also allows my Xbox to seemingly add to this list of ports as it finds necessary.
The issue is however, with Windows 8, although I can connect to Xbox Live the same way, it does not seemingly allow the Xbox to add more ports that it deems necessary. This leads to that NAT error message that I am actually trying to do this as a way to bypass it.
In Windows 7 this only works if the connection is set to Home (not sure about Work), but not public. I'm curious if the reason this does not work in Windows 8 is that Windows 8 does not have a Home option, but rather only Private or Public settings. There is some small setting buried deep somewhere that I just need to change to treat it like Windows 7 allows Xbox to treat home networks and configure/add ports automatically.
I would like to make a folder share from a tablet with windows 8 with password protected to a laptop of windows 7 and another of vista. I have followed the tutorial of File Sharing - "Share with" & "Stop Sharing" in Windows 8. My PCs have been set in the same workgroup and same user account, network discovery and file and printer sharing turned on. At the first time, it is OK for windows 7. However after some changes of account (delete and create them on both windows 8 and windows 7), it doesn't work anymore with the error from windows 7 "Login failure: user has not been granted the requested logon type at this computer" whenever password protected turned on in windows 8 and only OK when password turned off.
