Network / Sharing :: Wifi Does Not Automatically Start Up When Running On AC?
Mar 17, 2013
I have recently upgraded from windows 7 to windows 8 on my lenovo z470. Recently I have noticed that when I switch on my laptop with AC power (with battery removed), wifi does not automatically start up. I have to manually switch on the wifi through the hot key fn + F5. However, this does not happen if I run on battery without AC power. The wifi will have automatically started and connected. I have untick the network adapter properties of "allow the computer to turn off this device to save power. I have also ensured the WLAN AutoConfig is set to automatic.
View 1 Replies
ADVERTISEMENT
May 3, 2013
Though I have selected to automatically connect to my wifi network after switching on my laptop wont connect it I have to click connect for it to connect?
View 4 Replies
View Related
Aug 24, 2013
Have Divco PVR with wifi, and win 8 cannot access it easily, my old win 7 laptop can find it all the time no problems, and can see the win 8 laptop and the win 8 can see the win 7 laptop. Originally the win 8 machine could only ping the PVR using the IP address, but ping by name fails.
I followed the advice about changing Network Security LAN Manager authentication level etc. plus in Ethernet properties I un-ticked Microsoft LLDP Protocol Driver to make it the same as win 7. After all these I managed to get it to see the PVR when I typed in the IP address in the address bar in explorer at the Network page. I then mapped the folder, which is working, but this is a rather clunky solution. Question why can't win 8 just find the PVR like win 7.
View 1 Replies
View Related
Aug 2, 2013
Is there a way to setup network profiles or something so that when I bring my Surface Pro to work and connect to the wireless network there it will use the static ip address I have but when I disconnect and then connect to my home wifi it will go back to DHCP? On my MacBook Pro I can go into the network settings and change the location profile I have setup for networks but I don't see anything like this for Windows 8.
View 4 Replies
View Related
Oct 27, 2013
I have a Netgear WN111 wireless adapter on my PC. Since installing Windows 8.1 it doesn't connect automatically to the router. The PC says there are no connections available, so I can't even click on the router to try to connect. If I pull the adapter out and push it back into the USB port it connects automatically. Also, when I switch the PC off, the LED on the adapter continues to flash, so I have to pull it out and plug it in again to stop that. I've tried troubleshooting, compatibility check, reinstalling the driver and uninstalling the driver and getting Windows to install one itself.
View 9 Replies
View Related
Feb 21, 2013
Whenever I boot up my computer, I always have to go and connect to the internet. It doesn't automatically connect to the internet. I don't want to do this anymore. I tried clicking "Connect Automatically," but that didn't solve the problem. I also tried troubleshooting. It found some problems, and it was the problems were fixed but it still doesn't work.
View 9 Replies
View Related
Jul 21, 2014
There are too many tap windows adapters and tap win32 adapters in my network and sharing centre> network adapter. it keeps increasing and decreasing automatically. but i only need ethernet to connect to my broadband. how to get rid of these?
View 4 Replies
View Related
May 23, 2014
I signed up for a DNS service a while back. When I stopped using their service I removed their DNS entry from the ipv4 settings and considered it done (this was all they stated for install/uninstall, just update the DNS in ipv4)
At random, the PC will revert back to their DNS server. I have no virus (Malewarebytes Pro), my hosts file is empty.
Here's what I've done:
1) Removed it from ipv4 settings manually and reset to Obtain DNS Automatically
2) Open cmd as admin and ran the following sequence:
ipconfig /flushdns
ipconfig /registerdns
ipconfig /release
ipconfig /renew
netsh winsock reset
netsh int ip reset
3) Reboot
On reboot, everything is normal, anywhere from 24 hours to 30 DAYS later it automatically reverts back to their DNS servers. I am on a .edu domain. I do not have access to the router, but I never modified anything in the router. Why my PC keeps reverting to their DNS servers?
View 9 Replies
View Related
Apr 11, 2014
Having a strange issue with Onedrive. If I drag/drop files into my "local machine" onedrive folder it automatically syncs up with my onedrive account in the cloud. So the same files are both on my home system and in the cloud. That works. I can log on thru my browser at the onedrive site and log on, copy and download files...upload thru the browser and it will also show up on my local harddrive....so that works too.
The issue I'm having is if I use my metro tile screen, click on onedrive app, it opens up, I can see all the files in my onedrive account.....however if I right click while in app, then click upload it opens up my folder, I can pick the file I wish to upload and click "add to onedrive" nothing ever gets uploaded. No error message or anything, just nothing happens when using the app. No files ever show up or get uploaded. I can also pick a file using the onedrive app (from the cloud) and click download (to my local system), it allows me to pick the destination and hit OK, but I get an message " the file couldn't be saved" no matter where I decide to put it. So while onedrive is working for the most part if I bypass the windows 8 metro app, it is not working inside the app itself.
View 1 Replies
View Related
Aug 10, 2013
I just bought a Lenovo Y500 a couple of days ago and it came with a pre-installed Windows 8 everything seems working fine but when it comes to Wifi it randomly disconnects a lot , sometimes shows limited access and most of the time the signal strength bars keep going up and down.
View 6 Replies
View Related
Jun 9, 2014
I purchased a new Windows 8, Inspiron 15 7000 series - 7537 last December. I had been using a router at a hotel for the time, and it worked correctly. When I arrived home, I had a Belkin router, and i experienced network issues in that i could not connect to the wifi. I could connect with Ethernet cable. The problem was fixed through customer support eventually, but I now have a new Comcast router, and i'm experiencing what appears to be the same or a similar issue. I can access the internet fine by wire. With wifi, it says i have access to the internet over the internet icon in the bottom right, but i cannot access webpages. I can use skype, and communicate through it.
Here is the result from the ipconfig /all :
Microsoft Windows [Version 6.2.9200]
(c) 2012 Microsoft Corporation. All rights reserved.
C:Windowssystem32>ipconfig /all
Windows IP Configuration
[Code] .....
I really need the wifi on this router working for this laptop. Let me note that it works on other laptops, so it should be an issue with hardware or settings on this laptop.
View 8 Replies
View Related
May 10, 2014
I have two wifi APs in the home and only one has an Internet connection. the other is to access the wired LAN.
Last week I updated from Windows 8 to Windows 8.1 and thought everything was going well until I started getting wired LAN dropouts.
I have traced it back to 8.1 handling connection to wifi APs. In Windows 8, I was able to have "Connect automatically" for BOTH wifi adapters on this laptop. Now when I try to connect to the non-Internet AP, Windows 8.1 announces (correctly) "Limited access" and that's what Windows 8 did too. BUT, Windows 8.1 waits a few seconds then drops the connection with a useless message, "how me solve connection problems," where there is NO problem. A limited connection for the AP to the wired LAN is OK as it was in 8.
So now I am stuck with no home LAN access unless I drop the Internet AP and connect to the LAN AP.
Also, in the great wisdom of 8.1, because it is only a "limited" connection, it does not remember the Passphrase so I have to type it in every time. So much for progress.
What to do to get past this behavior and have a "limited" connection as OK as it is with Windows 8?
View 6 Replies
View Related
Dec 7, 2012
I prefer to keep my home WiFi network from public view by disabling the SSID broadcast, i.e "hiding" the network.
With two modem/routers (a Belkin Play Max F7D4401 ADSL modem/router and now a Cisco EPC2325 DOCSIS modem/router) on two computers (home-built desktop and Acer TM8172T notebook), after the initial connection Windows 8 Pro would not reconnect without tediously re-entering the SSID name and password. Once it does connect, it displays the original SSID name with a new one with an incrementally increasing appended number like:
I was manually deleting them all (except the original) using netsh, until I realized you can <right-click> on an entry in the screen above and choose "Forget this network."
This is the process I go through each time to re-connect. Is there something I'm missing?
I read that if Windows 8 saves too many WiFi connections, it cannot "remember" them to automatically reconnect to them, so on the notebook, I deleted all but wpcTrue (the original), and it now automatically reconnects, although occasionally it will add a new connection with an incrementally increased number -- currently the notebook shows both wpcTrue and wpcTrue 2. I had used the notebook on the road, so had about five WiFi connections saved. On the Desktop my home network is the only WiFi connection I've ever made. However, no matter what I do on the desktop, it NEVER remembers to automatically log on when the SSID is not broadcast.
I even tried manually setting up a connection via Network and Sharing Center > Set up a new connection or network, to no avail -- the desktop computer will not automatically reconnect.
I doubt that this is relevant, but the Belkin modem/router, the Belkin USB adapter I use on my desktop computer, and the notebook's Broadcom internal modem are all b/g/n. The Cisco modem/router is b/g.
If I "unhide" the SSID, i.e. broadcast the SSID, all is well in the world. Both computers automatically reconnect to the modem/router. If I hide the SSID, and then disconnect or reboot, the desktop computer will not automatically reconnect.
I just noticed that the pop up WiFi connection column shows "WiFi-2 Off" -- what does the "Off" mean?
And, why is it "-2" ? My notebook just shows "WiFi', period. (The first image with "WiFi (Off)" was from a previous Windows 8 installation on the desktop computer. I decided to change from EFI-boot to non-EFI so reinstalled Windows 8. I simply used the old image as a quick way to show how the connection name assignment runs away.)
View 3 Replies
View Related
Jun 27, 2014
How can i create local WIFI network without having internet access on my pc. This seems to work if I have access to internet but when i disconnect internet connection my PC ( virtual router ) cannot see anymore other devices..
All other devices that are connecting to my virtual hostednetwork are working without any problems expect my pc. What have i missed that my PC where virtual hostednetwork is running cannot see devices in "virtual" network without internet access?
View 3 Replies
View Related
Jun 16, 2013
My ISP provides service only via 802.11. I use laptop A most of the time. The captive portal for the service provider only allows one login per account at a time. The policy is intended to prevent multiple people sharing one account. It's just me, I'm the only user, but very occasionally I'd like to have a 2nd laptop access the internet simultaneously. No abuse, just the simple convenience of not having to logout from A if I need to use B for 30 seconds.
What I want to set up seems simple and it probably is:
WiFi Internet <---> Laptop A <---> ethernet cable <---> Laptop B
Such that Laptop B can share A's active WiFi connection without having to request its own unique address from the ISP.
At present, Laptop A has its network interfaces set up so:
- WiFi is connected, active, functional. Selected the "Yes turn on sharing and connect to devices" in sidebar.
- Under the wired network properties IP Version 4, I manually set addresses to be
IP 192.168.10.1
Subnet 255.255.255.0
Gateway 0.0.0.0
Laptop B has only a wired network, set to
IP 192.168.10.2
Subnet 255.255.255.0
Gateway 192.168.10.1
A & B can connect directly to each other, share folders, etc.
What do I need to do in order to get laptop B to transparently use A's WiFi connection? My guess is that A needs to be set up to do some routing between the internet side and the 192.168.10 subnet, and B needs to be set up to look to A as its "ISP" ... but I don't know where to begin.
View 2 Replies
View Related
Jul 18, 2013
I want to forget a Wi-Fi network from my network list i windows 8.1 . But when I right click on that network (to forget that network) nothing happens i.e. right click menu does not open.
View 6 Replies
View Related
Feb 27, 2013
My laptop is few months old HP Pavilion g6 OS: Windows 8 uses a ralink rt5390r 802.11bgn wifi adapter.
The wifi was working just fine suddenly it stopped. It detects my home network but every time it tries to connect ends up "unable to connect to this network". It connects to my friends wifi but not mine. And it connects with cable.
There is a red cross on the wifi network but it's green not GREY. It is not a modem problem because the other PC connects just fine. When I'm on wifi, cmd ipconfig gives me disconnected media for all the network cards on the laptop. Command netsh shows failure and access denied.
What I have tried to do for the past week :
I upgraded the adapter/ driver. My windows is fully updated. I re-installed the network card. I tried a USB wifi. I uninstalled the private server. I uninstalled my Norton because I thought it was blocking the connection I also deactivated the windows fire wall. I changed the SSID and PSW ... nothing worked. and of course I tried restarting, resetting, rebooting, deactivating and activating, disabling and enabling every single thing but nothing works.
View 9 Replies
View Related
Nov 1, 2013
I'm having a serious problem trying to connect my other laptops running windows 8, the host laptop that is connected to internet with modem is Compaq Presario g56 laptop also running windows 8, I'm connected to the internet with my evdo modem and this laptop is browsing fine, I download mhotspot to share this connection, this other computers are connected but showing limited connection in their network and sharing panel, the modem have access to internet and the private network I created on the host computer also show access to internet, so why are other computers connected to this computer are not browsing with this internet connection. attached is the screen shot of the host computer this problem had been persistent for more than one week
View 2 Replies
View Related
Jun 23, 2013
I just bought a msi s30 laptop yesterday. So everything went fine when I test the wifi connection before I go to sleep. When I say fine, I mean I could connect to the internet. Then when I woke up this morning, I turn on the wifi but it says "no network found". I check the router and it is working perfectly fine. I also checked the device driver and its also working properly.
View 5 Replies
View Related
Sep 15, 2014
Reinstalled lan driver and it is not showing in device manager. This is an acer aspire v3-371. Light doesn't come on when I toggle fn-f3 combo.
I think there is a service that is not running or it has been deleted. The driver files seem to have installled but it doesn't show under network adapters in device manager.
View 9 Replies
View Related
Sep 15, 2014
I have had my computer for a little under 2 years, and everything was fine until I updated to windows 8.1. Now every 5-10 minutes, my internet keeps changing from working fine, to saying Limited. Disconnecting and reconnecting fixes the problem for a few minutes. I am using several anti virus software as in AVG and McAfee, and they detect no problems. I have tried to troubleshoot the problem, and it works for about 2-5 minutes about half the time. The other half, it doesn't work at all. It takes about 30 minutes to do anything that would normally take about 15 minutes.
View 1 Replies
View Related
Apr 26, 2014
I have a new windows 8 machine (Dell Inspiron 2350), and there is a problem with the WIFI keeps disconnecting. I have determined that it seems to primarily happen whenever I am downloading any large files. When the computer is sitting idle or I am just browsing it doesn't seem to happen.
I do not have any such issue with my Windows 7 laptop or mobile devices.
I have already tried all the suggestions found elsewhere about changing the power management settings, and have already disabled "allow computer to turn off this device to save power".
I already have the latest driver, and have updated the bios.
View 3 Replies
View Related
Feb 5, 2013
I have a brand new Lenovo Ideapad Z585. It has a Broadcom Wireless adapter that will not connect to my home wireless network. I have tried everything I can think of to get it to connect to my Netgear router.
When I run Windows diagnostic tools it tells me that there is a problem with the wireless access point, there isn't I am using another laptop with no issues.
I have done a rescue install and gone through the same problems. This time the diagnostic report tells me I have not chosen a network to connect to despite entering the usual SSID, security type and password details in the network centre.
Networks are detected OK, I click on my network, am asked for the password and weither I wanted to share on the network, click ok and after a couple of seconds I am advised 'could not connect to network'
I have spent about 6 hours today trying to resolve this. The ethernet works fine.
I am completely ignorant of WIndows 8, this being my first computer to use it.
View 9 Replies
View Related
Jan 14, 2014
my WLAN Autoconfig, windows keeps telling me that the service isn't running - I've noticed when I run Services.msc that it's usually not on, so I start it up which seemed to have solved the problem yesterday but today - not so much...
So now it's not showing visible wireless networks (all working fine on the network with other pc's on xp), doesn't seem to respond to going into flight mode etc.
All drivers are up to date for the laptop (it's probably only a couple of months old).
View 9 Replies
View Related
Oct 14, 2013
Getting the limited connectivity problem when waking up my Toshiba laptop running 8.1. Having to reboot it every time I go to use it is getting old. Tried telling it not to shut off the wireless network car when going to sleep but that didn't seem to work.
View 3 Replies
View Related
Jul 6, 2013
I recently bought a new desktop PC. I've had it a few weeks and for some reason I've recently been having trouble with the wireless. I can verify that the problem is with the computer, as my old laptop, my phone, and other devices all seem to be doing fine and don't experience the same problem. As the title says, every few minutes, the WiFi stops. It doesn't go completely, it simply changes to the picture with the asterisk (*) in the bottom right. This happens for only a couple of seconds before it goes back to normal. Then, it will happen again after a few minutes. This is completely infuriating when trying to watch videos online.
Sometimes when I use the troubleshooter it finds a problem with the WiFi adapter and resets it, and then says the issue is fixed.
View 9 Replies
View Related
Feb 28, 2014
i`ve heared a lot of hacking wifi passwords and i wonderd is that ever possible or it is just a joke???
View 4 Replies
View Related
Apr 25, 2014
I have my ethernet cable connected right now, but I can't even load my wifi connections at all. I live in apartments so everyone around me has wifi and my phone and iPad is clearly connected, but it won't load any connections.
View 3 Replies
View Related
Jan 19, 2014
Yesterday I purchased a new Dell Laptop. In the setup and configuration the unit found my wireless network. I have two other PC's (not windows 8) two Kindles, two Cell phones and an IPAD on this router and all the Dell would say it it can't connect to this network. It won't ask for the passkey, it provides no additional information and I can't get online in my own network with this system. I can however log on to a neighbors unsecured network effortlessly.
I am using an old airlink 101 wireless router that has been trouble free for several years. I tried to log onto airlink for a support inquiry but they no longer provide support for this model.
View 1 Replies
View Related
Apr 11, 2014
I was playing a game on my laptop and decided to switch from wifi to ethernet. I plugged in the ethernet and turned off the wifi switch to ensure it switched over, but later when I tried to turn wifi back on, I see the wifi on/off switch is grayed out.
I went to my device manager to check for wifi network adapter driver updates, but everything seemed pretty up to date.
Any recommendations on how to fix this? Or at the least another method of turning the wifi on, like through command prompt or something?
View 1 Replies
View Related
Jul 21, 2013
Sometimes when I am working on my laptop doing whatever it just disconnects me out of the blue. It shows this stupid icon and says that there are no connections possible:
At first, I did not know what to do so I just began doing some random things on the network center. Then I figured out how to solve it:
First open network center
Then, Open adapter settings
Disable your Wifi network card
Next, Enable it again
And then your internet connection is back again
Now this works fine on short term, it takes like less then one minute.
View 3 Replies
View Related
