Network / Sharing :: Cannot Connect To WIFI
Feb 5, 2013
I have a brand new Lenovo Ideapad Z585. It has a Broadcom Wireless adapter that will not connect to my home wireless network. I have tried everything I can think of to get it to connect to my Netgear router.
When I run Windows diagnostic tools it tells me that there is a problem with the wireless access point, there isn't I am using another laptop with no issues.
I have done a rescue install and gone through the same problems. This time the diagnostic report tells me I have not chosen a network to connect to despite entering the usual SSID, security type and password details in the network centre.
Networks are detected OK, I click on my network, am asked for the password and weither I wanted to share on the network, click ok and after a couple of seconds I am advised 'could not connect to network'
I have spent about 6 hours today trying to resolve this. The ethernet works fine.
I am completely ignorant of WIndows 8, this being my first computer to use it.
View 9 Replies
ADVERTISEMENT
Sep 3, 2013
How can I connect two laptops wireless for playing games and sharing data ?
View 1 Replies
View Related
Nov 19, 2013
I have recently up-graded my laptop from 8 to 8.1. Since that time, the laptop will not automatically connect to my home wifi. If I try to connect manually, it will say "unable to connect to network" and that's it, no more clues! The only way I can connect is by selecting 'restart' and then it will re-boot and connect automatically. If I 'shut-down' after use (or hibernate) it will not re-connect until I have selected 're-start' which is time consuming and annoying!
View 2 Replies
View Related
Aug 6, 2014
I have a new Lumix GX7 camera which I'm trying to connect to a Dell laptop running Windows8.1 using WiFi direct.
The laptop sees the camera's WiFi signal but connects with "Limited Connectivity" when I input the camera's SSID and password.
What does Limited Connectivity mean and what should I check to enable a full connection so I can copy photos from the camera to PC via WiFi?
View 2 Replies
View Related
Aug 12, 2014
My girlfriend recently updated her computer from Windows 8 to 8.1 Since then, she's been unable to connect to her home wi-fi. She can only connect via cable. Unfortunately, neither of us have disks to roll her back to Windows 8.Yesterday she brought her computer to my house and it connected to my wi-fi with no problem.
I updated her adapter drivers to Windows 8.1 but that had no effect on her ability to connect to her home wi-fi network.Last night she ran "troubleshoot problems" and it says that her adapter is damaged. I highly doubt that since the computer is only a couple of months old and she could connect to my wi-fi network.
Computer: Lenovo G405
Modem/Router: ZTE ZXHN F660
Wi-Fi Adapter: Broadcom BCM4313 802.11b/g LP-PHY
View 2 Replies
View Related
Jul 7, 2014
For some reason my windows 8 Hp will not connect to my home wifi network. Has had no problem connecting in the past but yesterday I unplugged my router to move it to another part of my house and ever since then it can't connect. My cell phone and other laptop connect to the internet no problem.
On my Hp it will show a list of wifi networks and my home network is on the list, however, when I try to connect to it and then troubleshoot the problem it says I can't connect to the network because it is hidden. I don't see how thats possible since the network name shows up on the list of nearby wifi networks.
What I've done but hasn't worked:
Reset my router and laptop multiple times.
Tried to manually connect to network.
Forgot the network on my laptop and tried to reconnect.
I don't understand how one day it can connect to the wifi fine and then I unplug it and all of a sudden it can't connect but my other devices can.
View 4 Replies
View Related
Jan 19, 2014
I have Windows 8.1 installed on my laptop and following is the screen shot of the network information:
1. Basic Network information and setup information.
2. Properties of TIC/IP 4 connection under Advanced/WIN tab
Although, I can connect to other laptop if both are wired, but if other laptop is not wired then I can only see its name appearing in the homegroup connection but cannot connect to it.
View 9 Replies
View Related
Apr 11, 2013
I'm having trouble connecting my wifi printer (Canon pixma mg3100) and my Lacie Network Space on Windows 8, while I haven't experienced any problems connecting these same devices to my Win7 computers.
The driver for the printer is, according to Canon, compatible with windows 8.When I install the software on both my windows 7 laptops, it immediately recognize the network and after 5 minutes I can print wireless without any problems.
However when I try to install the same software on my Windows 8 computer it keeps asking to first plugin a usb cable and do a lot of manual steps, like pressing several buttons on the printer, it's ridiculous! After a while the software succeeds in finding my Wifi but it keeps on saying 'unable to connect'
My Windows 8 laptop is a brand new Dell Inspiron and I didn't change any network settings.
View 9 Replies
View Related
Mar 18, 2014
My windows 8 laptop will not connect to the wifi hotspot of my samsung galaxy note 3
Can find it on other devices such as : iphone, ipad, Mac Computer but nothing running windows 8
View 1 Replies
View Related
Sep 15, 2014
About two weeks ago I turned my laptop on and everything went blank, it couldn't read my drives, no data, nothing. After rebooting it a few times (with a lot of swearing and threatening to chuck it out of the window) eventually everything came back.
HOWEVER, since that night I have been unable to have a stable wireless connection. I have even reset my laptop to a factory setting. I then sent it away to get repaired and I'm still having the same issue. I've spent about two hours on the phone with my ISP but all of my other devices such as phone and iPad connect to the internet fine, although it does drop randomly every now and then.
I have a perfect connection when it is wired and works at a very good speed but if I try to connect to wifi it either says 'Unable to connect to this network' or 'limited' internet connection. My wifi also works to my ps3 and I'm able to stream videos without any annoying buffering.
The make is Lenovo and the model is Z580. It's about a year and a half old.
Is my wifi card (if there is one?!) broken? Can I just buy a USB port dongle that will connect to the internet? Or is there a magical cure?!
View 1 Replies
View Related
Jul 3, 2014
I am trying to troubleshoot a network connectivity issue for my Mom & Dad's laptop. It is an HP 64-bit running Windows 8.1. Up until this morning, it was able to connect to wi-fi. My mother was on the internet with no problems. They have my-fi with AT&T and my dad's laptop and tablet connect fine.
We have tried:
-Restarting the HP taking the battery out uninstalling the wi-fi network adapter
-Restarting and letting it reinstall for getting the network
-Manually adding the network back in
and nothing worked.
So, I took the laptop back to my house and connected it directly into my router via Ethernet cable, but to my surprise, it showed connected, but no internet connection. I ran the troubleshooter and it said that "Ethernet" doesn't have a valid IP config. I restarted the laptop with the ethernet plugged in, but it came back up with limited connectivity and the same error message. I tried connecting to my wifi at my house and again, it sees the various networks, but will not connect. I get a message when I hit the connect button that it is Checking network requirements, but then after about 30-45 seconds it says Can't connect to this network. All of the other laptops/pc's/tablets and phones are connecting just fine.
View 4 Replies
View Related
Jun 5, 2014
When i choose the connection's icon from the task bar, to connect to wifi, the connection side bar appears for a brief instant and disappears. At the moment i can connect to the network in my home, since it is default, but anywhere else i cant choose a new network.
Same occurs when i try to display available networks from the network and sharing centre.
I made a workaround which is very cumbersome for a casual user.
1. command prompt, and listed and deleted the profiles, using the netsh wlan command
2. Network and sharing
3. Setup new connection or network
4. Manually connect to a wireless network
5. typed the credentials of the network, checked start this connection automatically box and apply.
View 1 Replies
View Related
Jun 11, 2014
I purchased a new ASUS laptop a couple of days ago and have been trying to use the hotel wifi where I am staying to do the various updates and installs that new computers require. Unfortunately, while I can connect to my tethered cell phone, I cannot connect to the hotel.
I have another computer on hand that has no difficulties connecting to the hotel wifi, so I know the problem is in the new computer somewhere.
Network adapter is a Broadcom 802.11ac
Actions so far:
-Updated Windows 8.1 to current
-Attempted to reinstall drivers (uninstalling first) - Drivers are up to date and identical to the ones on manufacturer's site.
View 2 Replies
View Related
Feb 27, 2014
I have just installed 8.1 on my laptop and now my wifi card wont connect to the network. My PC works on wifi just fine.
My laptop is a Lenovo G405 using a 802.11n Broadcom card.
View 9 Replies
View Related
Apr 5, 2013
My windows 8 laptop will not connect to the wifi hotspot of my samsung galaxy s3. My windows 7 laptop connects just fine & the windows 8 laptop connects to my broadband router ok so it doesnt seem to be a physical problem.
View 2 Replies
View Related
Oct 15, 2014
I've been having wifi problems, it won't let me connect to any wifi network and it also says media disconnected? I have a dell xps late 2013 and windows 8.1....
View 5 Replies
View Related
May 3, 2013
Though I have selected to automatically connect to my wifi network after switching on my laptop wont connect it I have to click connect for it to connect?
View 4 Replies
View Related
Aug 2, 2013
Is there a way to setup network profiles or something so that when I bring my Surface Pro to work and connect to the wireless network there it will use the static ip address I have but when I disconnect and then connect to my home wifi it will go back to DHCP? On my MacBook Pro I can go into the network settings and change the location profile I have setup for networks but I don't see anything like this for Windows 8.
View 4 Replies
View Related
Dec 30, 2013
I have a lenovo G505 laptop - it will no longer connect to my BT home hub despite it showing as being available. I suspect it might be to do with the fact that it is has a passkey - I entered it yesterday when prompted and it connected fine, but now I'm not being given the option of entering the key.
I've also tried connected using the BT wifi (as opposed to homehub) but once again it will not connect me. I've been through all the troubleshooting options, and searched under every term I can think of, but nothing is working.
View 2 Replies
View Related
May 28, 2014
I'm using Windows 8.1 Professional. After the update to 8.1, I can't connect to my network printer which is connected to a Windows XP Home machine. Everything was working before the upgrade. I can currently see, connect, access and modify files on all the computers. I keep getting a message that I don't have permission to access the printer and I can't access the permissions on the Windows XP computer. I'm also using a Windows 7 computer which has no problem accessing the printer.
View 7 Replies
View Related
Aug 10, 2013
I just bought a Lenovo Y500 a couple of days ago and it came with a pre-installed Windows 8 everything seems working fine but when it comes to Wifi it randomly disconnects a lot , sometimes shows limited access and most of the time the signal strength bars keep going up and down.
View 6 Replies
View Related
Jun 9, 2014
I purchased a new Windows 8, Inspiron 15 7000 series - 7537 last December. I had been using a router at a hotel for the time, and it worked correctly. When I arrived home, I had a Belkin router, and i experienced network issues in that i could not connect to the wifi. I could connect with Ethernet cable. The problem was fixed through customer support eventually, but I now have a new Comcast router, and i'm experiencing what appears to be the same or a similar issue. I can access the internet fine by wire. With wifi, it says i have access to the internet over the internet icon in the bottom right, but i cannot access webpages. I can use skype, and communicate through it.
Here is the result from the ipconfig /all :
Microsoft Windows [Version 6.2.9200]
(c) 2012 Microsoft Corporation. All rights reserved.
C:Windowssystem32>ipconfig /all
Windows IP Configuration
[Code] .....
I really need the wifi on this router working for this laptop. Let me note that it works on other laptops, so it should be an issue with hardware or settings on this laptop.
View 8 Replies
View Related
May 10, 2014
I have two wifi APs in the home and only one has an Internet connection. the other is to access the wired LAN.
Last week I updated from Windows 8 to Windows 8.1 and thought everything was going well until I started getting wired LAN dropouts.
I have traced it back to 8.1 handling connection to wifi APs. In Windows 8, I was able to have "Connect automatically" for BOTH wifi adapters on this laptop. Now when I try to connect to the non-Internet AP, Windows 8.1 announces (correctly) "Limited access" and that's what Windows 8 did too. BUT, Windows 8.1 waits a few seconds then drops the connection with a useless message, "how me solve connection problems," where there is NO problem. A limited connection for the AP to the wired LAN is OK as it was in 8.
So now I am stuck with no home LAN access unless I drop the Internet AP and connect to the LAN AP.
Also, in the great wisdom of 8.1, because it is only a "limited" connection, it does not remember the Passphrase so I have to type it in every time. So much for progress.
What to do to get past this behavior and have a "limited" connection as OK as it is with Windows 8?
View 6 Replies
View Related
Dec 7, 2012
I prefer to keep my home WiFi network from public view by disabling the SSID broadcast, i.e "hiding" the network.
With two modem/routers (a Belkin Play Max F7D4401 ADSL modem/router and now a Cisco EPC2325 DOCSIS modem/router) on two computers (home-built desktop and Acer TM8172T notebook), after the initial connection Windows 8 Pro would not reconnect without tediously re-entering the SSID name and password. Once it does connect, it displays the original SSID name with a new one with an incrementally increasing appended number like:
I was manually deleting them all (except the original) using netsh, until I realized you can <right-click> on an entry in the screen above and choose "Forget this network."
This is the process I go through each time to re-connect. Is there something I'm missing?
I read that if Windows 8 saves too many WiFi connections, it cannot "remember" them to automatically reconnect to them, so on the notebook, I deleted all but wpcTrue (the original), and it now automatically reconnects, although occasionally it will add a new connection with an incrementally increased number -- currently the notebook shows both wpcTrue and wpcTrue 2. I had used the notebook on the road, so had about five WiFi connections saved. On the Desktop my home network is the only WiFi connection I've ever made. However, no matter what I do on the desktop, it NEVER remembers to automatically log on when the SSID is not broadcast.
I even tried manually setting up a connection via Network and Sharing Center > Set up a new connection or network, to no avail -- the desktop computer will not automatically reconnect.
I doubt that this is relevant, but the Belkin modem/router, the Belkin USB adapter I use on my desktop computer, and the notebook's Broadcom internal modem are all b/g/n. The Cisco modem/router is b/g.
If I "unhide" the SSID, i.e. broadcast the SSID, all is well in the world. Both computers automatically reconnect to the modem/router. If I hide the SSID, and then disconnect or reboot, the desktop computer will not automatically reconnect.
I just noticed that the pop up WiFi connection column shows "WiFi-2 Off" -- what does the "Off" mean?
And, why is it "-2" ? My notebook just shows "WiFi', period. (The first image with "WiFi (Off)" was from a previous Windows 8 installation on the desktop computer. I decided to change from EFI-boot to non-EFI so reinstalled Windows 8. I simply used the old image as a quick way to show how the connection name assignment runs away.)
View 3 Replies
View Related
Jun 27, 2014
How can i create local WIFI network without having internet access on my pc. This seems to work if I have access to internet but when i disconnect internet connection my PC ( virtual router ) cannot see anymore other devices..
All other devices that are connecting to my virtual hostednetwork are working without any problems expect my pc. What have i missed that my PC where virtual hostednetwork is running cannot see devices in "virtual" network without internet access?
View 3 Replies
View Related
Jun 16, 2013
My ISP provides service only via 802.11. I use laptop A most of the time. The captive portal for the service provider only allows one login per account at a time. The policy is intended to prevent multiple people sharing one account. It's just me, I'm the only user, but very occasionally I'd like to have a 2nd laptop access the internet simultaneously. No abuse, just the simple convenience of not having to logout from A if I need to use B for 30 seconds.
What I want to set up seems simple and it probably is:
WiFi Internet <---> Laptop A <---> ethernet cable <---> Laptop B
Such that Laptop B can share A's active WiFi connection without having to request its own unique address from the ISP.
At present, Laptop A has its network interfaces set up so:
- WiFi is connected, active, functional. Selected the "Yes turn on sharing and connect to devices" in sidebar.
- Under the wired network properties IP Version 4, I manually set addresses to be
IP 192.168.10.1
Subnet 255.255.255.0
Gateway 0.0.0.0
Laptop B has only a wired network, set to
IP 192.168.10.2
Subnet 255.255.255.0
Gateway 192.168.10.1
A & B can connect directly to each other, share folders, etc.
What do I need to do in order to get laptop B to transparently use A's WiFi connection? My guess is that A needs to be set up to do some routing between the internet side and the 192.168.10 subnet, and B needs to be set up to look to A as its "ISP" ... but I don't know where to begin.
View 2 Replies
View Related
Jul 18, 2013
I want to forget a Wi-Fi network from my network list i windows 8.1 . But when I right click on that network (to forget that network) nothing happens i.e. right click menu does not open.
View 6 Replies
View Related
Feb 27, 2013
My laptop is few months old HP Pavilion g6 OS: Windows 8 uses a ralink rt5390r 802.11bgn wifi adapter.
The wifi was working just fine suddenly it stopped. It detects my home network but every time it tries to connect ends up "unable to connect to this network". It connects to my friends wifi but not mine. And it connects with cable.
There is a red cross on the wifi network but it's green not GREY. It is not a modem problem because the other PC connects just fine. When I'm on wifi, cmd ipconfig gives me disconnected media for all the network cards on the laptop. Command netsh shows failure and access denied.
What I have tried to do for the past week :
I upgraded the adapter/ driver. My windows is fully updated. I re-installed the network card. I tried a USB wifi. I uninstalled the private server. I uninstalled my Norton because I thought it was blocking the connection I also deactivated the windows fire wall. I changed the SSID and PSW ... nothing worked. and of course I tried restarting, resetting, rebooting, deactivating and activating, disabling and enabling every single thing but nothing works.
View 9 Replies
View Related
Sep 15, 2014
My main PC, 2 laptops, an iPhone and an iPad all connect to my home wifi network. All worked perfectly until 3 days ago.
The 2 laptops and my PC all run Windows 8.1 (all updated). 3 days ago my Toshiba Qosmio stopped being able to connect to my home network. All other devices still connect perfectly.
The Qosmio doesn't detect my wifi network. I immediately went to the network adapter's (Qualcomm Atheros) website and downloaded the latest driver. Installed it and for a brief (very brief) time it could once again detect and connect to the network. Last 3 days unable to either detect or connect.
It detects other networks fine, and has no problems connecting to any other network - except mine (doesn't even detect mine anymore). It connects to the iPhone (when used as a hotspot) without any issues.
I've uninstalled and re-installed the new driver, re-booted the wireless router (several times), re-set the router to factory settings, used Windows trouble shooter, checked & deleted the netsh profiles. Re-booted the laptop a dozen + times, disabled (& uninstalled software) for the laptop's Bluetooth.
It simply stopped working.
I've tried everything I can find on the web - without any success at all. I've had the laptop sitting only a few cm from the router.
View 3 Replies
View Related
May 30, 2014
My wife's ASUS Win 8 laptop on a local network some how got connected to "Hidden Network" instead of the Normal ZFHL2. She was unable to shutdown last night. Finally she pulled the battery to power down. This morning after re-installing the battery, boot was normal and the connection was ZFHL2. We removed the "Connect Automatically" check from hidden network but it comes right back. We would like to remove hidden network to prevent this from re-occurring, we have not found a way to do that.
View 6 Replies
View Related
May 30, 2013
I recently installed a fresh version of Windows 8. Everything went smooth until I tried connecting to a wireless network.It finds the wireless network, after typing in the password (btw its a WPA2-Personal), I instantly get Can't connect to this network.I tried it on another wifi network and it gives me the same problem.Another thing I noticed is that when I right click on the Wifi network I get no options.And when I do it on a wired network I only get the turn on/off sharing option.By the way when connected directly to the router connection is perfect.
View 6 Replies
View Related
