When i choose the connection's icon from the task bar, to connect to wifi, the connection side bar appears for a brief instant and disappears. At the moment i can connect to the network in my home, since it is default, but anywhere else i cant choose a new network.
Same occurs when i try to display available networks from the network and sharing centre.
I made a workaround which is very cumbersome for a casual user.
1. command prompt, and listed and deleted the profiles, using the netsh wlan command
2. Network and sharing
3. Setup new connection or network
4. Manually connect to a wireless network
5. typed the credentials of the network, checked start this connection automatically box and apply.
About two weeks ago I turned my laptop on and everything went blank, it couldn't read my drives, no data, nothing. After rebooting it a few times (with a lot of swearing and threatening to chuck it out of the window) eventually everything came back.
HOWEVER, since that night I have been unable to have a stable wireless connection. I have even reset my laptop to a factory setting. I then sent it away to get repaired and I'm still having the same issue. I've spent about two hours on the phone with my ISP but all of my other devices such as phone and iPad connect to the internet fine, although it does drop randomly every now and then.
I have a perfect connection when it is wired and works at a very good speed but if I try to connect to wifi it either says 'Unable to connect to this network' or 'limited' internet connection. My wifi also works to my ps3 and I'm able to stream videos without any annoying buffering.
The make is Lenovo and the model is Z580. It's about a year and a half old.
Is my wifi card (if there is one?!) broken? Can I just buy a USB port dongle that will connect to the internet? Or is there a magical cure?!
I have a brand new Lenovo Ideapad Z585. It has a Broadcom Wireless adapter that will not connect to my home wireless network. I have tried everything I can think of to get it to connect to my Netgear router.
When I run Windows diagnostic tools it tells me that there is a problem with the wireless access point, there isn't I am using another laptop with no issues.
I have done a rescue install and gone through the same problems. This time the diagnostic report tells me I have not chosen a network to connect to despite entering the usual SSID, security type and password details in the network centre.
Networks are detected OK, I click on my network, am asked for the password and weither I wanted to share on the network, click ok and after a couple of seconds I am advised 'could not connect to network'
I have spent about 6 hours today trying to resolve this. The ethernet works fine.
I am completely ignorant of WIndows 8, this being my first computer to use it.
My ISP provides service only via 802.11. I use laptop A most of the time. The captive portal for the service provider only allows one login per account at a time. The policy is intended to prevent multiple people sharing one account. It's just me, I'm the only user, but very occasionally I'd like to have a 2nd laptop access the internet simultaneously. No abuse, just the simple convenience of not having to logout from A if I need to use B for 30 seconds.
What I want to set up seems simple and it probably is:
WiFi Internet <---> Laptop A <---> ethernet cable <---> Laptop B
Such that Laptop B can share A's active WiFi connection without having to request its own unique address from the ISP.
At present, Laptop A has its network interfaces set up so: - WiFi is connected, active, functional. Selected the "Yes turn on sharing and connect to devices" in sidebar. - Under the wired network properties IP Version 4, I manually set addresses to be IP 192.168.10.1 Subnet 255.255.255.0 Gateway 0.0.0.0
Laptop B has only a wired network, set to IP 192.168.10.2 Subnet 255.255.255.0 Gateway 192.168.10.1
A & B can connect directly to each other, share folders, etc.
What do I need to do in order to get laptop B to transparently use A's WiFi connection? My guess is that A needs to be set up to do some routing between the internet side and the 192.168.10 subnet, and B needs to be set up to look to A as its "ISP" ... but I don't know where to begin.
I recently upgraded to windows 8.1 pro on my laptop (HP Probook 6560b). This is an old business laptop that used to belong to my mother and originally had windows 7. After upgrading and installing all required drivers there is still no option to connect to the internet via Wi-Fi. (currently connecting via ethernet cable)
This is what my network screen looked like:
I say "looked" because that has since changed after downloading the broadcom driver from the HP website (this link> Broadcom Wireless LAN Driver for Microsoft Windows 8 | HP Support), now my network screen looks like this:
how can i set up windows 8 to allow 2 or more of users to connect to my windows 8 desktop by remote desktop connection i know there must be some way to use as when i was work experience every one one was connecting to the same comptere buy that a windows xp comptuer
I just got my new computer today and first thing I did after setting it all up was try and connect to the internet. I plugged in my ethernet cable I would only get "Limited Access" to the router I've spent the last 10hours+ trying to find a solution but not a single has worked now what to do.
I've tried manually putting IP/DNS but nope no luck. I've uninstalled drivers and reinstalled drivers, restarted router tried various cmd commands but I really just dont know what to do anymore.
My wifi always forget the connection that have been made. Every time I want to connect it always ask for the password even though I ticked "Automatically connect". This happened on all wifi connection.
I'm going to throw my hat into the ring of people with wi-fi issues following an update to 8.1. on a brand new Alienware 17.
After the update to 8.1 last night, wi-fi will connect and then drop out after I start transferring data (browsing)
The only remedy is to either restart, or "forget" the connection and re-establish. At which point it will again only work for several minutes, or until I start "using" it.
Wireless adapter is a Broadcom BCM4352 Wireless adapter.
I am running Windows 8 Home Edition. On a HP DV6-7250CA.I have a Intel Centrino Wireless-N 2230 Card.I also have several other laptops and desktop all connected to the same router. For some reason, randomly my Windows 8 HP laptop turns of my wifi internet access just on this laptop, then when i try to reconnect, it says unable to connect. The only way I can get back on line, is if I go to device manager, and disable and then reenable my wireless card.I have tried reinstalling the driver, and it still happens. None of my other machines are effected and run great on wifi. Why just this windows 8 laptop is randomly doing this?
I bought Windows 8 when it was released, like most people I liked the performance upgrades and other stuff, but that was about it. Months later I installed Windows 7 again, but it just felt old and there were a few things I missed about Windows 8, anyway yesterday I decided to install Windows 8 again (8.1) but I'm having a problem since I did.
Whenever I connected an external hard drive via USB3.0, Wi-Fi would disconnect. I searched this over to see if other people were having the same issue, there were some guys but they were using a USB based Wi-Fi adapter, I'm using the one in the laptop.
DETAILS Asus U47A Wi-Fi adapter: Intel Centrino Wireless-N 2230 External Hard Drive: Seagate Expansion Portable Drive (500GB, USB3.0) OS: Windows 8.1 Pro, All updates (Problem happens with or without updates, with original (Asus) or Windows supplied drivers)
I was loosing the Wi-Fi connection and I didn't know why, it was very intermitent, it would work for 10 minutes and then not, I then downloaded new drivers, directly from Intel, Asus and then using the Windows Update, it didn't work in neither case.
I was watching youtube and noticed the signal was good, it was working fine, and realised that the Seagate HDD was disconnected, I had just isolated the problem.
I tried to replicate it and indeed it happened, whenever I connected the drive, signal would be lost. At first I thought it might be a hardware-based issue, but it was working fine with Windows 7, so I decided to play with it a little more. I found out that Wi-Fi connection wasn't being lost, but rather loosing power, Windows would only display the closest routers (two, out of five or six that are in range). So I enabled internet sharing in my cell phone, guess what? It worked fine, signal was strong.
I connected the Seagate drive to a USB2.0 port, no problem. Then connected a different HDD (USB2.0) to the USB3.0 port, no problem.
So the thing is that Wi-Fi loses power when the USB3.0 HDD is connected to the USB3.0 port.
My Surface 2 has this issue where it is connected to the wireless network at first and then it gets limited connection followed by no connection until it re- connects. Sometimes it happens a lot, other times a bit more rarely but overall I feel it has been getting worse lately.
I have tried turning off the router as well as removing that specific connection from the Surface through command prompt and re-connect, but neither has worked.
I have tried trouble shooting the network to no avail, and according to device manager my network drivers are up to date so I don't know what's going on.
My building has wifi. I am able to connect and surf the net. There are 4 connections available to use. Periodically, I get disconnected/reconnected or my signal is very low. Am told it's due to the number of users connecting at one time or accessing a sight that may reduce my signal.
I do have access to change the 4 Network connection properties.
- Set to connect automatically when in range. - Set to mixed band with options 2.4or 5.2 Ghz open.
I've spent a whole day trying to restore my Wifi connection after downloading 8.1. I've looked at forums all over the web and despite many people having the same problem, I haven't found a solution that works for me.
i have a lenovo idea pad that will connect to wifi but says limited connection. I can use the iternet via ethernet cable with no issues. My ISP is comcast and I have one of their modems that came with wifi im guessing it doubles as a router seeing i direct connect to it with my laptop. however my wifi works for my xbox one, a nexus 7 tablet a xbox 360 ,a printer and two smartphones with no issues what so ever. They are not all on at once so max connections shouldnt be a issue. I've spent hours on the phone with comcast and they insist its the laptop and not the wifi, how to go about fixing the issue. I've checked the drivers and their up to date then uninstalled and reinstalled still no luck. i use firefox for browsing and AVG for antivirus.
I have recently up-graded my laptop from 8 to 8.1. Since that time, the laptop will not automatically connect to my home wifi. If I try to connect manually, it will say "unable to connect to network" and that's it, no more clues! The only way I can connect is by selecting 'restart' and then it will re-boot and connect automatically. If I 'shut-down' after use (or hibernate) it will not re-connect until I have selected 're-start' which is time consuming and annoying!
My girlfriend recently updated her computer from Windows 8 to 8.1 Since then, she's been unable to connect to her home wi-fi. She can only connect via cable. Unfortunately, neither of us have disks to roll her back to Windows 8.Yesterday she brought her computer to my house and it connected to my wi-fi with no problem.
I updated her adapter drivers to Windows 8.1 but that had no effect on her ability to connect to her home wi-fi network.Last night she ran "troubleshoot problems" and it says that her adapter is damaged. I highly doubt that since the computer is only a couple of months old and she could connect to my wi-fi network.
For some reason my windows 8 Hp will not connect to my home wifi network. Has had no problem connecting in the past but yesterday I unplugged my router to move it to another part of my house and ever since then it can't connect. My cell phone and other laptop connect to the internet no problem.
On my Hp it will show a list of wifi networks and my home network is on the list, however, when I try to connect to it and then troubleshoot the problem it says I can't connect to the network because it is hidden. I don't see how thats possible since the network name shows up on the list of nearby wifi networks.
What I've done but hasn't worked: Reset my router and laptop multiple times. Tried to manually connect to network. Forgot the network on my laptop and tried to reconnect.
I don't understand how one day it can connect to the wifi fine and then I unplug it and all of a sudden it can't connect but my other devices can.
I have Windows 8.1 installed on my laptop and following is the screen shot of the network information:
1. Basic Network information and setup information. 2. Properties of TIC/IP 4 connection under Advanced/WIN tab
Although, I can connect to other laptop if both are wired, but if other laptop is not wired then I can only see its name appearing in the homegroup connection but cannot connect to it.
I'm having trouble connecting my wifi printer (Canon pixma mg3100) and my Lacie Network Space on Windows 8, while I haven't experienced any problems connecting these same devices to my Win7 computers.
The driver for the printer is, according to Canon, compatible with windows 8.When I install the software on both my windows 7 laptops, it immediately recognize the network and after 5 minutes I can print wireless without any problems.
However when I try to install the same software on my Windows 8 computer it keeps asking to first plugin a usb cable and do a lot of manual steps, like pressing several buttons on the printer, it's ridiculous! After a while the software succeeds in finding my Wifi but it keeps on saying 'unable to connect'
My Windows 8 laptop is a brand new Dell Inspiron and I didn't change any network settings.
I just bought a dell xt2 on ebay it came with windows 8 pro. My problem is that it goes into limited connection every ten minutes, even when i am next to the router. The error I get when i trouble shoot is the Default gateway is not available.
am getting winsock error 10060 the connection timed out when using Wi-Fi connecting with just one of the sites. I pinged and it's fine too. When using wired connection it works fine.
Recently my Samsung laptop has been getting kicked of my house's WiFi. The computer will power up normally and connect to the WiFi, but as soon as I try to use the WiFi to access the internet the connection fails.Typically this only occurs when other devices are connected to the same WiFi. As soon as the other decieves are taken of the WiFi the computer is able to access the internet again. I have tried updating all my drivers and still nothing.
I Just Upgrade My Laptop Windows From 7 To 8.1 But I Have Lots Of Limited Wi-Fi connection And I Just downloaded The drivers For Win 8 From Hp Website But Still Have It And The Only annoying Fix Is When I Do The troubleshooting Think Its Says default gateway Not available Or something Like That . My Laptop Is Hp G7 Wireless Driver is Broadcom 4313GN 802.11 B .
I have recently upgraded to Windows 8.1. After the update what i have noticed is i lost wifi connectivity in the virtual machine which running Windows 2008 R2 server. I have Windows 8.1 and VMware workstation 8.0. Windows 2008 R2 is running in the Virtual machine and i was able to connect to wifi from the virtual machine and share files netween Windows 8 and Windows 2008 R2. but now i can't connect anymore. Even when i enable WLAN service on Windows 2008 R2, i don't see the wifi adapter in network settings.
I use my cell phone for internet access on my laptop, since it can act as a portable wifi access point.
The problem I'm having is that every time I connect, Windows 8.1 creates a new profile. So I started with "Phone access point", then I got "Phone access point 2" on the second connection, "Phone access point 3" on the third connection, and so on and so on, creating a new profile every time I connect.
Is there any way I can tell Windows 8.1 to use the same network profile whenever it connects to "Phone access point", since it's the same connection as it was last time. It does it correctly for all the other wifi access points I connect to: home, work,, the only one that's causing a problem is the phone's connection.
I am facing a strange problem with my internet connection on Windows 8.
I have a netgear WNR612 wifi router and two laptops connected to it running Windows 7 on first and Windows 8 on second.
The connection in Windows 8 laptop shows sufficient signal strength but when I try to access internet, it does only shows connecting. I have changed browsers, wifi router, adsl router, released and reconnected IP address, forgot and re-added wifi network, reset wifi router to factory almost everything.
The strange part is that as soon as the other Windows 7 laptop is disconnected from the network, Windows 8 internet start working fine. I have tested this many times and there is no doubt in this behavior.
I dont know whether the problem is in any update installed on Windows 8 the older Dell Wireless 1703 wifi card or some virus in the other Windows 7 laptop.
My ipconfig output:
Ethernet adapter Bluetooth Network Connection:
Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Bluetooth Device (Personal Area Network) Physical Address. . . . . . . . . : F4-B7-E2-59-1E-42
[Code] .....
Note that I have assigned preferred IP addresses to both laptops based on MAC.
