Network / Sharing :: How To Connect Homegroup In Windows 8 Over WiFi
Jan 19, 2014
I have Windows 8.1 installed on my laptop and following is the screen shot of the network information:
1. Basic Network information and setup information.
2. Properties of TIC/IP 4 connection under Advanced/WIN tab
Although, I can connect to other laptop if both are wired, but if other laptop is not wired then I can only see its name appearing in the homegroup connection but cannot connect to it.
I just purchased a new laptop with windows 8.1. I previously had two laptops and a desktop all running windows 7 and all connected to my network wirelessly. I had a homegroup set up on the desktop that works fine for all windows 7 machines, but I cannot get the new 8.1 machine to connect to it. The new machine sees that the homegroup is there but after I put in the password it says it no longer can find the homegroup.
I tried to run the homegroup troubleshooter and got a vague response about network problems, but no problems were detected by the network troubleshooter. I've also tried creating a local user instead of logging in with a Microsoft account but got the same message when I tried to connect.
I have a big problem in homegroup configuration. To Clarify this is my set up:
Router is in the living room. Computer PC 1 connected via ethernet cable in the living room. Computer loptop 2 in bed room connected via wireless.
When computer 2 is connected via ethernet cable to router, homegroup is working and every thing is ok. but when use WiFi, I can't access to shared files.
My girlfriend recently updated her computer from Windows 8 to 8.1 Since then, she's been unable to connect to her home wi-fi. She can only connect via cable. Unfortunately, neither of us have disks to roll her back to Windows 8.Yesterday she brought her computer to my house and it connected to my wi-fi with no problem.
I updated her adapter drivers to Windows 8.1 but that had no effect on her ability to connect to her home wi-fi network.Last night she ran "troubleshoot problems" and it says that her adapter is damaged. I highly doubt that since the computer is only a couple of months old and she could connect to my wi-fi network.
For some reason my windows 8 Hp will not connect to my home wifi network. Has had no problem connecting in the past but yesterday I unplugged my router to move it to another part of my house and ever since then it can't connect. My cell phone and other laptop connect to the internet no problem.
On my Hp it will show a list of wifi networks and my home network is on the list, however, when I try to connect to it and then troubleshoot the problem it says I can't connect to the network because it is hidden. I don't see how thats possible since the network name shows up on the list of nearby wifi networks.
What I've done but hasn't worked: Reset my router and laptop multiple times. Tried to manually connect to network. Forgot the network on my laptop and tried to reconnect.
I don't understand how one day it can connect to the wifi fine and then I unplug it and all of a sudden it can't connect but my other devices can.
About two weeks ago I turned my laptop on and everything went blank, it couldn't read my drives, no data, nothing. After rebooting it a few times (with a lot of swearing and threatening to chuck it out of the window) eventually everything came back.
HOWEVER, since that night I have been unable to have a stable wireless connection. I have even reset my laptop to a factory setting. I then sent it away to get repaired and I'm still having the same issue. I've spent about two hours on the phone with my ISP but all of my other devices such as phone and iPad connect to the internet fine, although it does drop randomly every now and then.
I have a perfect connection when it is wired and works at a very good speed but if I try to connect to wifi it either says 'Unable to connect to this network' or 'limited' internet connection. My wifi also works to my ps3 and I'm able to stream videos without any annoying buffering.
The make is Lenovo and the model is Z580. It's about a year and a half old.
Is my wifi card (if there is one?!) broken? Can I just buy a USB port dongle that will connect to the internet? Or is there a magical cure?!
I have a brand new Lenovo Ideapad Z585. It has a Broadcom Wireless adapter that will not connect to my home wireless network. I have tried everything I can think of to get it to connect to my Netgear router.
When I run Windows diagnostic tools it tells me that there is a problem with the wireless access point, there isn't I am using another laptop with no issues.
I have done a rescue install and gone through the same problems. This time the diagnostic report tells me I have not chosen a network to connect to despite entering the usual SSID, security type and password details in the network centre.
Networks are detected OK, I click on my network, am asked for the password and weither I wanted to share on the network, click ok and after a couple of seconds I am advised 'could not connect to network'
I have spent about 6 hours today trying to resolve this. The ethernet works fine.
I am completely ignorant of WIndows 8, this being my first computer to use it.
My windows 8 laptop will not connect to the wifi hotspot of my samsung galaxy s3. My windows 7 laptop connects just fine & the windows 8 laptop connects to my broadband router ok so it doesnt seem to be a physical problem.
I have recently up-graded my laptop from 8 to 8.1. Since that time, the laptop will not automatically connect to my home wifi. If I try to connect manually, it will say "unable to connect to network" and that's it, no more clues! The only way I can connect is by selecting 'restart' and then it will re-boot and connect automatically. If I 'shut-down' after use (or hibernate) it will not re-connect until I have selected 're-start' which is time consuming and annoying!
I'm having trouble connecting my wifi printer (Canon pixma mg3100) and my Lacie Network Space on Windows 8, while I haven't experienced any problems connecting these same devices to my Win7 computers.
The driver for the printer is, according to Canon, compatible with windows 8.When I install the software on both my windows 7 laptops, it immediately recognize the network and after 5 minutes I can print wireless without any problems.
However when I try to install the same software on my Windows 8 computer it keeps asking to first plugin a usb cable and do a lot of manual steps, like pressing several buttons on the printer, it's ridiculous! After a while the software succeeds in finding my Wifi but it keeps on saying 'unable to connect'
My Windows 8 laptop is a brand new Dell Inspiron and I didn't change any network settings.
I am trying to troubleshoot a network connectivity issue for my Mom & Dad's laptop. It is an HP 64-bit running Windows 8.1. Up until this morning, it was able to connect to wi-fi. My mother was on the internet with no problems. They have my-fi with AT&T and my dad's laptop and tablet connect fine.
We have tried: -Restarting the HP taking the battery out uninstalling the wi-fi network adapter -Restarting and letting it reinstall for getting the network -Manually adding the network back in and nothing worked.
So, I took the laptop back to my house and connected it directly into my router via Ethernet cable, but to my surprise, it showed connected, but no internet connection. I ran the troubleshooter and it said that "Ethernet" doesn't have a valid IP config. I restarted the laptop with the ethernet plugged in, but it came back up with limited connectivity and the same error message. I tried connecting to my wifi at my house and again, it sees the various networks, but will not connect. I get a message when I hit the connect button that it is Checking network requirements, but then after about 30-45 seconds it says Can't connect to this network. All of the other laptops/pc's/tablets and phones are connecting just fine.
When i choose the connection's icon from the task bar, to connect to wifi, the connection side bar appears for a brief instant and disappears. At the moment i can connect to the network in my home, since it is default, but anywhere else i cant choose a new network.
Same occurs when i try to display available networks from the network and sharing centre.
I made a workaround which is very cumbersome for a casual user.
1. command prompt, and listed and deleted the profiles, using the netsh wlan command
2. Network and sharing
3. Setup new connection or network
4. Manually connect to a wireless network
5. typed the credentials of the network, checked start this connection automatically box and apply.
I purchased a new ASUS laptop a couple of days ago and have been trying to use the hotel wifi where I am staying to do the various updates and installs that new computers require. Unfortunately, while I can connect to my tethered cell phone, I cannot connect to the hotel.
I have another computer on hand that has no difficulties connecting to the hotel wifi, so I know the problem is in the new computer somewhere.
Network adapter is a Broadcom 802.11ac
Actions so far:
-Updated Windows 8.1 to current -Attempted to reinstall drivers (uninstalling first) - Drivers are up to date and identical to the ones on manufacturer's site.
I cannot remove the Homegroup from windows 8.1. I followed the instructions for windows 7 but nothing happens and homegroup is still there in file explorer.
I have a desktop and a laptop both running Windows 8 and are both members of the homegroup. In File explorer both machines can see the other in the homegroup but when I double click I get a message (on either machine) "This PC is currently unavailable". This has only been a problem since using 8. When I was all windows 7 the homegroup worked perfectly. Both machines have been set up to share everything including the kitchen sink. I must have a setting wrong somewhere. This used to be an intermittent thing. When I had my old desktop (also windows 8) other homegroup machines could occasionally see the desktop but sometimes not!! I have a BT router that on an individual basis works fine. All machines are using the wi fi on the router.
I have a Samsung Series 9 13in laptop running windows 8, and I'm attempting to stream video to my xbox 360 (it's one of the new, "slim" ones). I've read you need your homegroup set up in order to facilitate this, but I'm having nothing but trouble with it.
When I try to change any settings on the homegroup, most of the settings are greyed out, and the ones a can change reset as soon as I do it.
Screenshot is here: [URL] ....
How do I enable these settings? Any tips for streaming from Windows 8 to xbox?
My problem is the inability to create a new Homegroup. The password I had for the one I created does not work since I left the homegroup. Now the only option available to me it to join a homegroup I have been invited to. I don' t know any user live near that has invited me to join so I think it is my old homegroup but that password is long gone. Now I cant share my videos and music with my xbox. I use an apple airport express that my computer and xbox sign in to but my xbox does not see my computer however, my computer sees my xbox.
I am running windows8 pro 32 bit, with a Xerox workcentre 3119 laser printer attached to it, by usb. It prints fine. But... I have a homegroup with a windows7 home premium 64 bit machine on it.
I did a clean reinstall on the windows7 pc, and now I can't print to the Xerox from the windows7 pc.
I tried removing and reinstalling the printer on the windows7 pc,
I tried reinstalling the driver for the printer on my windows8 pc,
I tried removing all the computers from the homegroup and recreating the homegroup,
I tried removing the printer from the windows7 pc and changing the name of "workgroup" and then reinstalling the printer on the windows7 pc. But I still can print from the windows7 pc.
I finally found a "problem" with the Windows 8 desktop. Its a problem in Windows 7 too but I had never started a Homegroup. The darn icon won't move and you can't delete it. There is a Windows 7 fix for the problem at HomeGroup Desktop Icon - Add or Remove - Windows 7 Forums and it works with Windows 8.
If you want access to the Homegroup shortcut be sure to pin it to the start menu (I guess we call that the Start screen now) before you delete it.
I'm using Win 8 Pro and i'm on a Private network which happens to be my Home Network. I'm having problem saving HomeGroup settings; I went through Change Advanced Sharing Settings then I checked Turn on network discovery and Turn on file and printer sharing, I clicked save and but when I return to the setting page again, the settings are not saved.
I've tried this several times but nothing seems to be working out. The same thing still happens when I go through Charms >> Change PC Settings >> HomeGroup >>Libraries and Devices.
I can't join my homegroup, it randomly stopped working a week ago (ish) when i try to reconnect to the homgroup now it says "A homegroup can only be created on a private network...change settings blah bah..." Although I have everything setup correctly and i'm trying to join a homegroup not make one. I read,
Homegroup - Create in Windows 8 and Homegroup - Join in Windows 8 did everything still nothing :I the 2 other computers connected to the main homegroup computer is working fine. Now i can't think of anything.
I have set up homegroup on my 2 computers. A windows 7Home premium and a windows 8.1 on my tablet. Windows 7can see and open windows 8.1 files with no problem. Windows 8.1 can see windows 7 files , but cannot open them .A window pops up asking for credentials. I don't know what to do with that
I've been having wifi problems, it won't let me connect to any wifi network and it also says media disconnected? I have a dell xps late 2013 and windows 8.1....
I'm unable to create a home group. when i try to do so, i'm getting an error message saying "Windows just detected an existing homegroup. To join it, click ok, and then open homegroup in control panel."
But the problem is, i don't have any existing homegroup on my pc. at the same time, there were no any other devices connected to my network. i tried with a pc aswell. but it didn't work, When i try to join, i'm getting an error like,
I'm running on win 8. i tried to clear all files on the folder
"C:WindowsServiceProfilesLocalServiceAppDataRoamingPeerNetworking" and tried restarting the homegroup provider and listener and they were running. And ipv6 is also enabled.