Network / Sharing :: Win 8 Cannot Automatically See PVR
Aug 24, 2013
Have Divco PVR with wifi, and win 8 cannot access it easily, my old win 7 laptop can find it all the time no problems, and can see the win 8 laptop and the win 8 can see the win 7 laptop. Originally the win 8 machine could only ping the PVR using the IP address, but ping by name fails.
I followed the advice about changing Network Security LAN Manager authentication level etc. plus in Ethernet properties I un-ticked Microsoft LLDP Protocol Driver to make it the same as win 7. After all these I managed to get it to see the PVR when I typed in the IP address in the address bar in explorer at the Network page. I then mapped the folder, which is working, but this is a rather clunky solution. Question why can't win 8 just find the PVR like win 7.
View 1 Replies
ADVERTISEMENT
Oct 27, 2013
I have a Netgear WN111 wireless adapter on my PC. Since installing Windows 8.1 it doesn't connect automatically to the router. The PC says there are no connections available, so I can't even click on the router to try to connect. If I pull the adapter out and push it back into the USB port it connects automatically. Also, when I switch the PC off, the LED on the adapter continues to flash, so I have to pull it out and plug it in again to stop that. I've tried troubleshooting, compatibility check, reinstalling the driver and uninstalling the driver and getting Windows to install one itself.
View 9 Replies
View Related
Mar 17, 2013
I have recently upgraded from windows 7 to windows 8 on my lenovo z470. Recently I have noticed that when I switch on my laptop with AC power (with battery removed), wifi does not automatically start up. I have to manually switch on the wifi through the hot key fn + F5. However, this does not happen if I run on battery without AC power. The wifi will have automatically started and connected. I have untick the network adapter properties of "allow the computer to turn off this device to save power. I have also ensured the WLAN AutoConfig is set to automatic.
View 1 Replies
View Related
Feb 21, 2013
Whenever I boot up my computer, I always have to go and connect to the internet. It doesn't automatically connect to the internet. I don't want to do this anymore. I tried clicking "Connect Automatically," but that didn't solve the problem. I also tried troubleshooting. It found some problems, and it was the problems were fixed but it still doesn't work.
View 9 Replies
View Related
Jul 21, 2014
There are too many tap windows adapters and tap win32 adapters in my network and sharing centre> network adapter. it keeps increasing and decreasing automatically. but i only need ethernet to connect to my broadband. how to get rid of these?
View 4 Replies
View Related
May 23, 2014
I signed up for a DNS service a while back. When I stopped using their service I removed their DNS entry from the ipv4 settings and considered it done (this was all they stated for install/uninstall, just update the DNS in ipv4)
At random, the PC will revert back to their DNS server. I have no virus (Malewarebytes Pro), my hosts file is empty.
Here's what I've done:
1) Removed it from ipv4 settings manually and reset to Obtain DNS Automatically
2) Open cmd as admin and ran the following sequence:
ipconfig /flushdns
ipconfig /registerdns
ipconfig /release
ipconfig /renew
netsh winsock reset
netsh int ip reset
3) Reboot
On reboot, everything is normal, anywhere from 24 hours to 30 DAYS later it automatically reverts back to their DNS servers. I am on a .edu domain. I do not have access to the router, but I never modified anything in the router. Why my PC keeps reverting to their DNS servers?
View 9 Replies
View Related
Apr 11, 2014
Having a strange issue with Onedrive. If I drag/drop files into my "local machine" onedrive folder it automatically syncs up with my onedrive account in the cloud. So the same files are both on my home system and in the cloud. That works. I can log on thru my browser at the onedrive site and log on, copy and download files...upload thru the browser and it will also show up on my local harddrive....so that works too.
The issue I'm having is if I use my metro tile screen, click on onedrive app, it opens up, I can see all the files in my onedrive account.....however if I right click while in app, then click upload it opens up my folder, I can pick the file I wish to upload and click "add to onedrive" nothing ever gets uploaded. No error message or anything, just nothing happens when using the app. No files ever show up or get uploaded. I can also pick a file using the onedrive app (from the cloud) and click download (to my local system), it allows me to pick the destination and hit OK, but I get an message " the file couldn't be saved" no matter where I decide to put it. So while onedrive is working for the most part if I bypass the windows 8 metro app, it is not working inside the app itself.
View 1 Replies
View Related
May 8, 2014
When I upgraded to Win8.1, it asked if I wanted to automatically connect to my hidden network. I've never set up a hidden network. Sometimes it shows up in my list of WiFi connections. My computer also shows me as belonging to a workgroup, which I never joined. Then one day another network showed up called TOA24 and it was set up to automatically connect. Now it shows up every time I connect to my WiFi connection. Is it possible to determine how my computer joined a workgroup without my knowledge or created a hidden network? I have Norton Security Suite (through Comcast) running on this computer.
System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 8.1 Pro, 64 bit
Processor: Intel(R) Core(TM) i7-3610QM CPU @ 2.30GHz, Intel64 Family 6 Model 58 Stepping 9
Processor Count: 8
RAM: 8087 Mb
Graphics Card: Intel(R) HD Graphics 4000, -1984 Mb
Hard Drives: C: Total - 931493 MB, Free - 823816 MB; D: Total - 22071 MB, Free - 2286 MB; F: Total - 98 MB, Free - 66 MB;
Motherboard: Hewlett-Packard, 181C
Antivirus: Windows Defender, Disabled
View 1 Replies
View Related
May 3, 2013
Though I have selected to automatically connect to my wifi network after switching on my laptop wont connect it I have to click connect for it to connect?
View 4 Replies
View Related
Aug 12, 2013
I am trying to share a specific folder on my Windows 8 computer with my Windows 7 computer. They are both on the same network connected to the same router. The Windows 8 computer is connected through ethernet, while the Windows 7 computer is connected wirelessly.
Here are my settings on my Windows 8 Computer:
This is the error I get on my Windows 7 computer:
What's up with this? On a related note, is it possible to share this folder with a specific PC, rather than "Everyone" on the network?
View 5 Replies
View Related
Apr 23, 2013
I am having trouble with ICS on win 8. On my old laptop (win xp) I used to be able to share my 3Connect dongle internet to connect to Xbox live. I recently got a new laptop with win 8 and whenever I share this internet connection I can never connect on my Xbox (the network to internet part fails). When everything is connected up and shared the Ethernet says 'Unidentified Network' which i believe is the cause of the problem. I've read i may require a driver update but i cannot seem to find one.
My Laptop: Toshiba Satellite C855-29N
what to do, maybe i am not setting up the connection sharing properly?
View 9 Replies
View Related
Aug 20, 2014
I've been trying to set up an old Savin 9033 printer through the company's router, but I couldn't find the network it's set up on from any other computer.
So I pull up Network & Sharing, see that Network Discovery is turned off.
I check it, go to click on "Save Changes" and nothing happens. I click it a few times and it kicks me back to the previous page, nothing saved. No password prompt or anything.
I double checked that all the appropriate services are running (DNS Client, SSDP Discovery, UPnP Device Host, Function Discoveryr Resource Publication, etc.) and made sure Network Discovery was allowed through Windows Firewall.
View 2 Replies
View Related
Aug 2, 2013
Is there a way to setup network profiles or something so that when I bring my Surface Pro to work and connect to the wireless network there it will use the static ip address I have but when I disconnect and then connect to my home wifi it will go back to DHCP? On my MacBook Pro I can go into the network settings and change the location profile I have setup for networks but I don't see anything like this for Windows 8.
View 4 Replies
View Related
Feb 27, 2013
This morning I installed an optional update from Windows Update. It was Ralink Technology WLAN 802.11 wireless LAN card.
Since then, when I try to print to my wireless network printer, the network would disconnect then come back on after a while. The update shows up in Update History as successfully installed but not in the installed updates. System restore is of no support here. The network configuration page shows normal. The web does not appear to be affected. I made a new network connection for the printer but it did not work.
Is there a way to reverse this update or should I uninstall the 802.11 LAN card and let windows re-install anew.
The printer is a HP Officejet Pro 8600e
View 5 Replies
View Related
Jul 24, 2014
When you first connect to a new network Windows 8.1 opens up the following window:
I am trying to automate a way so that the answer is always: yes, turn on sharing and connect to devices.
It needs to be automatic without requiring the user to click on the window. This will be used in systems where no keyboard/screen/mouse are present.
View 8 Replies
View Related
May 25, 2014
Windows 8.1 Pro with Media Center,
Windows 8.1
Comcast Gateway.
Pro Media can access 8.1 Network and Homegroup.
8.1 cannot access ant Pro Media. Network Error "Windows cannot access DesktopUsersPeteDocuments' (or any other folder)
Can access IP4 address.
Windows 8.1 new machine, came with 8, updated to 8.1 then 8.1 Update.
View 5 Replies
View Related
Jul 24, 2014
I am trying to get file sharing to work with my win 8 machine and my OS X Server. The computers are on the same network with the same workgroup but I can't seem to connect. I was able to connect with the wife's win 7 home machine until I upgraded it to win 7 Ultimate now it wont connect either.
View 1 Replies
View Related
Feb 6, 2013
I am in the midst of the final steps in setting my my new Win 8 system.
I have a Win XP and Win 8 computer on my home network. I believe that I have set up file and printer sharing correctly. I can access the files and printer on the XP system from the Win 8 system. However, when I attempt to access the Win 8 files from the Win XP system, I get a long delay (about a minute or two) and then it asks me for the User Name & Password. I enter them and then and it works fine.
If I try to print on the printer attached to the Win 8 system from the XP system, I get a printer error unless I have already signed in with the ID & PW when accessing files. It never asks me for an ID & PW before attempting to print.
On the Win 8 system, I have selected "Turn off password protected sharing" in the "Network and Sharing Center/Advanced Sharing Settings".
The Win XP system has previously been correctly sharing files and printers with another XP system for some time and I haven't changed any settings on the XP computer.
Both the XP and Win 8 systems are assigned the same Workgroup name.
View 9 Replies
View Related
Aug 9, 2014
I want to backup my photos from my computer's D: drive to OneDrive. But when I start to upload them, it says those photos are also available offline. That means, all photos uploaded from my D: drive are also copied to my C: drive. But it wastes my space on the C: drive. All my settings are set to upload photos with online access only. I tried to delete the copied photos from my C: drive but it also deleted them from OneDrive. Is it possible to upload only to OneDrive without copying the photos to C: drive?
View 1 Replies
View Related
Jan 3, 2014
Okay, so in Windows 7 I am able to connect my wireless to my phone, and run an ethernet cable over to my Xbox. If I use the ICS feature and configure it under services to allow ports 88 and 53 UDP, it works fine. This also allows my Xbox to seemingly add to this list of ports as it finds necessary.
The issue is however, with Windows 8, although I can connect to Xbox Live the same way, it does not seemingly allow the Xbox to add more ports that it deems necessary. This leads to that NAT error message that I am actually trying to do this as a way to bypass it.
In Windows 7 this only works if the connection is set to Home (not sure about Work), but not public. I'm curious if the reason this does not work in Windows 8 is that Windows 8 does not have a Home option, but rather only Private or Public settings. There is some small setting buried deep somewhere that I just need to change to treat it like Windows 7 allows Xbox to treat home networks and configure/add ports automatically.
View 3 Replies
View Related
Jun 8, 2013
I would like to make a folder share from a tablet with windows 8 with password protected to a laptop of windows 7 and another of vista. I have followed the tutorial of File Sharing - "Share with" & "Stop Sharing" in Windows 8. My PCs have been set in the same workgroup and same user account, network discovery and file and printer sharing turned on. At the first time, it is OK for windows 7. However after some changes of account (delete and create them on both windows 8 and windows 7), it doesn't work anymore with the error from windows 7 "Login failure: user has not been granted the requested logon type at this computer" whenever password protected turned on in windows 8 and only OK when password turned off.
View 1 Replies
View Related
Jun 16, 2013
My ISP provides service only via 802.11. I use laptop A most of the time. The captive portal for the service provider only allows one login per account at a time. The policy is intended to prevent multiple people sharing one account. It's just me, I'm the only user, but very occasionally I'd like to have a 2nd laptop access the internet simultaneously. No abuse, just the simple convenience of not having to logout from A if I need to use B for 30 seconds.
What I want to set up seems simple and it probably is:
WiFi Internet <---> Laptop A <---> ethernet cable <---> Laptop B
Such that Laptop B can share A's active WiFi connection without having to request its own unique address from the ISP.
At present, Laptop A has its network interfaces set up so:
- WiFi is connected, active, functional. Selected the "Yes turn on sharing and connect to devices" in sidebar.
- Under the wired network properties IP Version 4, I manually set addresses to be
IP 192.168.10.1
Subnet 255.255.255.0
Gateway 0.0.0.0
Laptop B has only a wired network, set to
IP 192.168.10.2
Subnet 255.255.255.0
Gateway 192.168.10.1
A & B can connect directly to each other, share folders, etc.
What do I need to do in order to get laptop B to transparently use A's WiFi connection? My guess is that A needs to be set up to do some routing between the internet side and the 192.168.10 subnet, and B needs to be set up to look to A as its "ISP" ... but I don't know where to begin.
View 2 Replies
View Related
Sep 15, 2014
I've got a new Win 8.1 computer (Surface Pro 3), and on that computer, as an adiministrator, I turn off Password Protected Sharing for my network (Control Panel -> Network and Sharing Center -> Advanced sharing settings -> All networks). Once this is done, the other computers on the LAN have good access to the disks I have shared. However, when my new computer sleeps and wakes up, or even sometimes if I merely close the cover and open it, something has reset the password protected sharing option and turned it back on. The other computers no longer can access the shared data. I have to open up the control panel (as above) and turn password protected sharing off. Again. Many times a day.
How do I get this option to stick the way I set it?
View 3 Replies
View Related
Aug 10, 2013
I just bought a Lenovo Y500 a couple of days ago and it came with a pre-installed Windows 8 everything seems working fine but when it comes to Wifi it randomly disconnects a lot , sometimes shows limited access and most of the time the signal strength bars keep going up and down.
View 6 Replies
View Related
Dec 24, 2013
windows 8.0
I was happily using file history, it was backing up to my G partition, which is located on my second hard drive (both drives are internal)but now I get error message:
I think the problem is that this partition got added to my user, that's what the network path shows:
How do I get it out of my user, and back on a normal path?
View 1 Replies
View Related
Jul 17, 2014
I have a 20mbps upload with my ISP and I'm getting around 18.5 consistently. I've started using Zoolz for backing up and I have been assured it does not throttle the bandwidth. It reports it is uploading at around 15-16mbps which would be absolutely fine but Task Manager and NetSpeedMonitor show the upload speed as considerably lower.
I've attached a screenshot showing the difference but I was wondering if Task manager and NetSpeedMonitor could be wrong at all? It seemed quite coincidental that the speed reported by Zoolz was roughly what I would expect. Is there any sort of traffic that wouldn't show with Task Manager?
View 1 Replies
View Related
Dec 15, 2013
I re-installed Windows 8 yesterday evening (thought it would be quicker than to cleanup and fix my old install) and then directly upgraded it to Windows 8.1. The problem I am experiencing is quite weird: The Operating System doesn't detect the network cable.
With that being said, do not jump straight to the "Did you turn it on and off again" questions. Here is what I have done so far:
Hardware-Side: Cross-check the cable with another computer --> Working fineCross-check the wall plug with another computer --> Working fineTest the connection with the BIOS's connection diagnostic utility --> Link detected
Software-Side: Checking if Windows was up to date --> Nothing to updateUpdating the motherboard's BIOS --> Not betterUpdating the LAN's drivers with the ones I found on the manufacturer's website --> Not better
I am wondering what is wrong with my installation. It was working A1 a few days ago, except for the issues I re-installed the operating system for.
View 4 Replies
View Related
Aug 19, 2014
In my network 4 Desktop running windows XP all are connected LAN cable and my modem is tplink and 1 laptop running windows 8.1 pro accessing network through wireless in my laptop network place all the pcs are visible but I am not able to ping them and when I click I am getting message that Network path not found Error code 0x80070035
View 2 Replies
View Related
Dec 30, 2013
I have a lenovo G505 laptop - it will no longer connect to my BT home hub despite it showing as being available. I suspect it might be to do with the fact that it is has a passkey - I entered it yesterday when prompted and it connected fine, but now I'm not being given the option of entering the key.
I've also tried connected using the BT wifi (as opposed to homehub) but once again it will not connect me. I've been through all the troubleshooting options, and searched under every term I can think of, but nothing is working.
View 2 Replies
View Related
May 6, 2014
My 8.1 laptop shows multiple network connections to my Samsung Smart TV --- One as "media connections" and 3 as "other connections". Both devices are on a simple wireless network using Linksys WRT54GS.
Under the "Network" page, most of the "Properties" of the TV connections are the same except for "Serial Number" and "Unique Identifier". Did I do something wrong when setting things up? Are these extra connections harmful? Should I delete some? How?
View 1 Replies
View Related
Mar 23, 2013
Windows 8 64. To date all my networking needs are just fine
Though I do have just one last loose end to tie up with the adhoc wifi it just fails after sleep.
View 1 Replies
View Related
