Network / Sharing :: Something Keeps Turning Password Protected Sharing Back On
Sep 15, 2014
I've got a new Win 8.1 computer (Surface Pro 3), and on that computer, as an adiministrator, I turn off Password Protected Sharing for my network (Control Panel -> Network and Sharing Center -> Advanced sharing settings -> All networks). Once this is done, the other computers on the LAN have good access to the disks I have shared. However, when my new computer sleeps and wakes up, or even sometimes if I merely close the cover and open it, something has reset the password protected sharing option and turned it back on. The other computers no longer can access the shared data. I have to open up the control panel (as above) and turn password protected sharing off. Again. Many times a day.
How do I get this option to stick the way I set it?
I am in the midst of the final steps in setting my my new Win 8 system.
I have a Win XP and Win 8 computer on my home network. I believe that I have set up file and printer sharing correctly. I can access the files and printer on the XP system from the Win 8 system. However, when I attempt to access the Win 8 files from the Win XP system, I get a long delay (about a minute or two) and then it asks me for the User Name & Password. I enter them and then and it works fine.
If I try to print on the printer attached to the Win 8 system from the XP system, I get a printer error unless I have already signed in with the ID & PW when accessing files. It never asks me for an ID & PW before attempting to print.
On the Win 8 system, I have selected "Turn off password protected sharing" in the "Network and Sharing Center/Advanced Sharing Settings".
The Win XP system has previously been correctly sharing files and printers with another XP system for some time and I haven't changed any settings on the XP computer.
Both the XP and Win 8 systems are assigned the same Workgroup name.
I would like to make a folder share from a tablet with windows 8 with password protected to a laptop of windows 7 and another of vista. I have followed the tutorial of File Sharing - "Share with" & "Stop Sharing" in Windows 8. My PCs have been set in the same workgroup and same user account, network discovery and file and printer sharing turned on. At the first time, it is OK for windows 7. However after some changes of account (delete and create them on both windows 8 and windows 7), it doesn't work anymore with the error from windows 7 "Login failure: user has not been granted the requested logon type at this computer" whenever password protected turned on in windows 8 and only OK when password turned off.
While trying to share folders and files not within a homegroup, but with workgroup, I create 2 same accounts on my desktop pc and my notebook that have windows 8 installed on them. Then I share folders and when accessing dtPC or notebook windows does not ask for a password, just opens the files under the network group. However when i start windows and try to access shared folders right away, it gives me the message that the path was not found. Only a while after that it gives me the access.
If I try to do the same thing but with the notebook what has windows 7 installed it asks me for a password and username as expected and everything goes well.
Why can't I make windows 8 ask for credentials while trying to reach another pc with windows 8.
I have a new Windows 8-notebook connected to a workgroup-ethernet-network via router,to which a windows [version unknown]-server is connected and 6 other clients,2 of them macs,4 xp-pcs.
On all machines,3 other machines resp shares are constantly visible in "network places":
1 the server-share 2 a client-1 share (which has no internet access) 3 a client-2-with-internet-access-share
The notebook gets internet via the wall-plugged lan,from a router-plugged DSL-router. All issues mentioned here are not dependent on which lan-wall-socket is used. (there are 3 in each room). There is no wlan-accesspoint.
Issue: The notebook is _not _seeing_ (not in net places,and not forceable) the server-share_, despite the fact,that the share has been used before to install a bigger client-server software,which worked.
First appearance: Some day someone tried to access a lan-wall-plug-connected printer for printing, which at that time could be seen in network places,as then could the server; after which _both_ disappeared.
Unfortunately,above said client-server-sw is not working anymore on the notebook. How can I bring back the server-share to the Windows 8-notebook?
I am trying to change my MTU value, after changing in cmd(admin) it says "Ok" but when I reboot, the value switches back to the default value(1500), how to change it to the value(1492) I have set in my router.
On windows 7 I made a shortcut for when I used remote desktop I could press on this shortcut and the session came to an end and the previous user could use the computer without typing pass.
This shortcut: %windir%System32 scon.exe RDP-Tcp#0 /dest:console
I have to find the right session number in task manager. So I have to change the 0 to whatever session id I log in with.
Are there a shortcut that will always work without have to edit the shortcut every time? A symbol or something for the correct login number?
I have Windows 8.1 Pro installed signed in with my Microsoft a/c. I have some folders shared on the network through Wifi. I also have an Android device with a File Manager that has SMB capabilities.
Now I want the to connect to my shared folders through the app which works perfectly fine. But what my requirement is that if anybody else want to connect to those shared folders (with the same or another app), I have to give out my Microsoft Account password for that.
Is there a way that I can avoid this password giving? What I'm looking is for creating another set of credentials to access the shared folders without giving away my Microsoft account details. I assume I can create a local account and do the same. Is there any other way I can do this?
I just bought a new Intel NUC which i installed a clean and fully updated Windows 8.1 Pro on. I want to create a networkshare on this machine, which everyone can just access (read permissions) to view the content of a folder or drive.
I am trying to access the drive on another (my own) installed Windows 8.1 Pro (also fully updated). Every time i try to access the machine through the Network explorer in Windows i will be prompted to enter credentials.
I have checked the network settings following this article (amongst others): Network Location - Set to Private or Public in Windows 8 on both machines.
I also checked all the sharing settings on both machines (private/home network, allow external connections, allow all types of connections, allow sharing without password etc. etc.).
I am a bit dazzled as to why the machine keeps asking me to enter credentials. This is standard protocol nowadays? (I wonder how that would work on a machine that has a local user without a password).
I went back through the last few pages but didn't see something similar. Using 8.1.
Just had to setup a new network. Switched it to private and wanting to require password requirements for log on. However, when I turned on my IPod to test it out, my IPod connected without me getting a password prompt.
I'm know I'm missing something, just not where. Checked both the PC settings screen, as well as the Network Screen under the Control Panel.
I have a HP Pavilion A6 VISION AMD with Win 8 Home. It will look at and access all the files on that other 2 XP machines but is being stingy. When the XP's try to go to the Windows 8 machine it want's a password. I have tried my logon password. I have used a password generated by Windows' 8 itself. Nothing works. I'd rather not have the password needed at all. Never did before I did this factory recovery. File Sharing is on.
for a while I've been using netsh to add some IP addresses to the standard windows loopback adapter (interface idx=1) which worked fine until today when I ran windows update.
I have always used this command to assign my loopback adapter an extra IP:
netsh int ip add addr 1 address=111.111.111.111 mask=255.255.255.0 st=ac
(using an example IP address)
But since installing the updates, this returns the following error message:
Failed to configure the DHCP service. The interface may be disconnected.The system cannot find the file specified.
However, when I do "netsh int ip show int" it clearly shows the following interfaces:
Idx Met MTU State Name --- ---------- ---------- ------------ --------------------------- 1 50 4294967295 connected Loopback Pseudo-Interface 1 3 25 1500 connected Wi-Fi 4 5 1500 disconnected Local Area Connection* 2
and it's not disconnected at all. The only fix I have found so far was reinstalling windows 8.1 and not installing any updates... I just installed the updates again and it stopped working.
My wifi always forget the connection that have been made. Every time I want to connect it always ask for the password even though I ticked "Automatically connect". This happened on all wifi connection.
My Setup: I have a Windows 8.1 Home Premium PC acting as a server. It has Password Protected Sharing Turned Off, andit has 'Everyone' permission on both the folder share and folder security. Now, in past, especially with Windows 7, this was enough to make this work, but something must be different with Windows 8. My other Windows 8 PC is using a microsoft account so it does have a password.
What Happens: When I browse to the server I get prompted for username and pass, if I spam anything into the username field, it will let me in.
What I know will fix it: Adding my username and password to the server that is on my Windows 8 PC.
What I don't want to do: See above
So I want the share to be open as possible, without prompting for password for anyone. I'm guessing the issue is because my other PC has a password, but it doesn't make sense that it is prompting me when everyone should have access regardless.
I have an old Dell netbook that crashed (literally) on the ground, broke the screen. Hard drive is intact and accessible by a USB device, but that pesky password I made up to protect the files under my personal username, even though I know it, doesn't appear anywhere for me to access the document. I haven't found references made to it, but the hard drive has Windows XP operating system on it and I am running 8 on the computer I have now. Don't know if that has anything to do with not being able to get control panel to open on that one. I'm trying to continue writing a book I had started on that computer and foolishly didn't save elsewhere.
I have Vista with shared files and folders but when I click on the PC shown in computers or do a run //pctosharewithneame
I receive a username and PW entry box.
On my Vista I do not log in with a PW. My account name is HOME and has no PW and it is set up as Adminwhch may be different than a machine admin-not sure.
I assume that would be the user name would be home. But Home and no PW was not accepted by the Win 8 machine for the Vista machine
Every time I sign into my windows 8 account at home it never automatically connects to it. I tried following the tutorial at [URL]......
However when I get up to the part where you are support to right click on the wifi connection to access view connection properties I am unable to. Right clicking on the wireless connection does absolutely nothing. I even tried clicking on it and holding and still nothing.
When I go to the network and sharing center and click on the wireless connection it pops up a dialogue called wi-fi status. However there is no button for wireless properties. I remember in windows 7 there use to be a tab where you change the key encryption type and there was a check box where you can save the password. Essentially I can't access the dialog box in page 10 of the above link.
I just traveled to a place where there is supposed to be wifi and I am staying here for a while. The wifi connects well through Ipod, but when connecting through windows 8 it accepts the password but tells me this connection is limited.
I searched through some threads and did some of the solutions such as the netsh reset for example but none have worked so far. Should I do a factory reset to my laptop?
Any way to password protect shutting down or reset computer? Or maybe "redirecting" user to lock screen? I don't want to disable shutting down in user policy or renaming shutdown.exe. Just pop-up or something to password verify these actions, system or software.
I upgraded to Windows 8.1 and all has been great except one thing. When I leave the computer for about 10 minutes or so, the display turns off like it is supposed to. If I want to turn the display back on though, I find I'm unable to with the mouse, keyboard, or power button. It's like it is stuck in limbo and I have to restart the PC.
I am trying to share a specific folder on my Windows 8 computer with my Windows 7 computer. They are both on the same network connected to the same router. The Windows 8 computer is connected through ethernet, while the Windows 7 computer is connected wirelessly.
Here are my settings on my Windows 8 Computer:
This is the error I get on my Windows 7 computer:
What's up with this? On a related note, is it possible to share this folder with a specific PC, rather than "Everyone" on the network?
I am having trouble with ICS on win 8. On my old laptop (win xp) I used to be able to share my 3Connect dongle internet to connect to Xbox live. I recently got a new laptop with win 8 and whenever I share this internet connection I can never connect on my Xbox (the network to internet part fails). When everything is connected up and shared the Ethernet says 'Unidentified Network' which i believe is the cause of the problem. I've read i may require a driver update but i cannot seem to find one.
My Laptop: Toshiba Satellite C855-29N
what to do, maybe i am not setting up the connection sharing properly?
I've been trying to set up an old Savin 9033 printer through the company's router, but I couldn't find the network it's set up on from any other computer.
So I pull up Network & Sharing, see that Network Discovery is turned off.
I check it, go to click on "Save Changes" and nothing happens. I click it a few times and it kicks me back to the previous page, nothing saved. No password prompt or anything.
I double checked that all the appropriate services are running (DNS Client, SSDP Discovery, UPnP Device Host, Function Discoveryr Resource Publication, etc.) and made sure Network Discovery was allowed through Windows Firewall.
I am trying to get file sharing to work with my win 8 machine and my OS X Server. The computers are on the same network with the same workgroup but I can't seem to connect. I was able to connect with the wife's win 7 home machine until I upgraded it to win 7 Ultimate now it wont connect either.
I want to backup my photos from my computer's D: drive to OneDrive. But when I start to upload them, it says those photos are also available offline. That means, all photos uploaded from my D: drive are also copied to my C: drive. But it wastes my space on the C: drive. All my settings are set to upload photos with online access only. I tried to delete the copied photos from my C: drive but it also deleted them from OneDrive. Is it possible to upload only to OneDrive without copying the photos to C: drive?
Okay, so in Windows 7 I am able to connect my wireless to my phone, and run an ethernet cable over to my Xbox. If I use the ICS feature and configure it under services to allow ports 88 and 53 UDP, it works fine. This also allows my Xbox to seemingly add to this list of ports as it finds necessary.
The issue is however, with Windows 8, although I can connect to Xbox Live the same way, it does not seemingly allow the Xbox to add more ports that it deems necessary. This leads to that NAT error message that I am actually trying to do this as a way to bypass it.
In Windows 7 this only works if the connection is set to Home (not sure about Work), but not public. I'm curious if the reason this does not work in Windows 8 is that Windows 8 does not have a Home option, but rather only Private or Public settings. There is some small setting buried deep somewhere that I just need to change to treat it like Windows 7 allows Xbox to treat home networks and configure/add ports automatically.
My ISP provides service only via 802.11. I use laptop A most of the time. The captive portal for the service provider only allows one login per account at a time. The policy is intended to prevent multiple people sharing one account. It's just me, I'm the only user, but very occasionally I'd like to have a 2nd laptop access the internet simultaneously. No abuse, just the simple convenience of not having to logout from A if I need to use B for 30 seconds.
What I want to set up seems simple and it probably is:
WiFi Internet <---> Laptop A <---> ethernet cable <---> Laptop B
Such that Laptop B can share A's active WiFi connection without having to request its own unique address from the ISP.
At present, Laptop A has its network interfaces set up so: - WiFi is connected, active, functional. Selected the "Yes turn on sharing and connect to devices" in sidebar. - Under the wired network properties IP Version 4, I manually set addresses to be IP 192.168.10.1 Subnet 255.255.255.0 Gateway 0.0.0.0
Laptop B has only a wired network, set to IP 192.168.10.2 Subnet 255.255.255.0 Gateway 192.168.10.1
A & B can connect directly to each other, share folders, etc.
What do I need to do in order to get laptop B to transparently use A's WiFi connection? My guess is that A needs to be set up to do some routing between the internet side and the 192.168.10 subnet, and B needs to be set up to look to A as its "ISP" ... but I don't know where to begin.
I have an external HDD that I like to store music and pictures and videos on. But I also put personal stuff on it like homework or notes I write to myself. I'm sharing the entire drive across my home network. So they have access to everything. Even the stuff I dont want them to have access to.
Can I stop sharing that one specific folder on the drive? Or do I just have to take it off the drive and put it on my local disc? I right click on the folder I dont want to share. And it says "sharing" Then I hover over it. "Stop sharing" I click that. But I test it on my sister's laptop and it still is accessible. How do I hide that folder from my home network?
Does the settings for them go back to default (on) every time the modem is reset or the network name changed?
Why does media streaming automatically gets turned on? (I don't even have any public folders)
How can I see who is accessing which files through sharing? Is there any old or new way to check all the shared folders in Windows 8?
I don't want sharing settings to change when the connection, or the connection name has changed; how can I do this?
I only realized that sharing was on when I tried to rename and move a file. It said it is open somewhere else. It didn't show me which computer was accessing what? Can I find that out next time it happens?
Yes, I want to put my music into music folder, but that doesn't mean that I want them to be accessed by the network (As I mentioned before, I don't have any public folders -or somehow I don't see them [show hidden files are on])
When I click any library folders (or even any other folder, even in an external drive); stop sharing is always an option, but clicking it doesn't change anything, stop sharing option still stays on. When I click on sharing settings, I only see my username as the owner.
Any library (or any media file on pc) can be accessed this easily? Even without writing a username and password?
