Network / Sharing :: Wireless Adapter Not Automatically Connecting?
Oct 27, 2013
I have a Netgear WN111 wireless adapter on my PC. Since installing Windows 8.1 it doesn't connect automatically to the router. The PC says there are no connections available, so I can't even click on the router to try to connect. If I pull the adapter out and push it back into the USB port it connects automatically. Also, when I switch the PC off, the LED on the adapter continues to flash, so I have to pull it out and plug it in again to stop that. I've tried troubleshooting, compatibility check, reinstalling the driver and uninstalling the driver and getting Windows to install one itself.
View 9 Replies
ADVERTISEMENT
Nov 13, 2013
After a while when i'm browsing the web etc, my wireless connection goes to Limited and there are no other wireless networks available (when there should be 10+ networks).
When i disconnect that limited connection, there are suddenly no networks found and my wireless adapter disables itself and i can't re-enable it anymore. The only thing to restart my computer.
This occures after a couple of minutes. I had this problem before, but then it fixed itself for a couple of weeks and now i have the same problem again.
I've tried reinstalling my drivers, but doesn't do the trick..
I have an Asus N76VM laptop running Windows 8.1 Pro 64 Bit with a Intel(R) Centrino(R) Wireless-N 2230 adapter.
View 9 Replies
View Related
Jun 20, 2014
I have a Lenovo Ideapad Y500 laptop running Windows 8.1. i7, 8BG ram, 2GB Nvidia card--all that stuff. It ran perfectly for nearly a year. But now, the local area network is broken. I haven't done anything different or changed anything that would affect it, as far as I know. But now that it's summer, I have lots of free time but I can not lan any games with people, which sucks. So I googled and googled, tried the netsh int ip reset resetlog.txt (or whatever it is), tried ipconfig resets and stuff, and none of that works. The wireless lan adapter Media State is still "Media disconnected."
I took this screenshot AFTER I did OneKey Recovery (which is a factory reset). It set my computer back to the original settings: Windows 8, full of bloatware, etc. I did this reset last night, updated it, updated it to Windows 8.1, updated Windows 8.1, and finally, before I went to bed, tested the LAN. It worked, I was able to connect to my Dad's Minecraft world. So I set my laptop to start re-downloading my games (reset deleted all my data), and when I opened it up this morning to play Minecraft with my family, the LAN was not working again. I couldn't connect (or even find) the lan games.
View 7 Replies
View Related
Apr 28, 2013
I just got a computer that comes with Windows 8 and I'm trying to get on the internet with the wireless adapter I was using on the old computer but I keep getting an error message. I am able to install it from the disc but when I go to run the program it says "Can't load ProcNICs.dll" This is the adapter I am using (version 4). The most recent driver the website lists for this adapter is for Vista. Is there a way to get this to work?
View 9 Replies
View Related
Jul 7, 2014
This is a 6 month Old Gateway Laptop, Windows 8 preinstalled. Broadcom Network Adapter.
I have a Buffalo WZR-300GB Router (2.4mHz, with 802.1/ 11g/b/n) all working. There are 4 wired and 3 wireless computers on the network. Wife's Gateway (Windows 8) is the ONLY one with [wireless]dropped connections. No MOVE has been made with Her Laptop or the Router.
This is the troubleshooting I've have done so far.
Uninstalled/reinstalled network adapters.Reset the adapters. Scanned Hardware changes (before/after) in the Device ManagerTurned off Power Management.Disabled the Lan (wired) connection-adapter.Removed (Forget this Connection) 2 other wireless connections from outside the home.Wireless Adapters are set to "Maximum Performance" under (edit power plan).Moved to Laptop (actually the 1st thing I did) to 2 different locations with same results, dropped connection.Under settings the Topology is all Checked, Except 2 I have never seen before. Multi-Layer Protocol, and Kernel 64 something. Anyway, when I insert a check mark next to both. I'm Prompted "Do you really want to disable this connections?" I have done both (checked/unchecked) nothing changes.Under Device Manager: Restore all Hidden Adapters, About Five More adapter showed up I had never seen before. So then I Scanned for Hardware Changes. No effect!
View 1 Replies
View Related
Jun 14, 2014
I keep loosing the Internet, every few days, and I go to my adapter settings, disable, then enable, and it comes back on. My adapter ia an Asus PCE-N15 Wireless LAN PCI-E card. I have a Lenovo H415 desktop running Windows 7.
View 3 Replies
View Related
May 24, 2014
Laptop - Acer Aspire V5-552G-X414
Router - Asus RT-N56U
Modem - Arris DG860
Wifi Adapter - Atheros AR5BWB222
ISP - Time Warner Cable, 20/2 Mbps
Devices Connected - 2 Iphones, 1 Kindle Fire, 1 PS4, 1 Desktop, 1 Laptop
No Error Messages
Problem: Laptop won't connect at full speed UNLESS I uninstall driver and reinstall. Then it will connect at 20Mbps until I close the lid or restart the computer (I think, not sure on when it slows back down). It slows down to what looks to be 3-4Mbps every single time. It shows no error message and no reason as to why it slows down that I can tell. Device manager shows no problems. Desktop is also ran on wireless through a different adapter and never loses speed, so I'm fairly certain its an adapter or windows problem with the laptop. I've tried original driver and updated to most recent driver and still does this. I've turned off automatic update of driver in Windows 8.1 also.
View 2 Replies
View Related
Mar 3, 2014
I am connected to my router by a Ethernet cable. can i still connect to my printer wireless?
View 7 Replies
View Related
Sep 15, 2014
i got usb adapter WDL-U700 dual band 802.11n wireless USB adapter it doesnt seem detect 5ghz wifi
i already checked/change configuration to multimedia/gamig enviroment, channel mode etc
View 9 Replies
View Related
Jun 23, 2013
I have a neighbor who has an OPEN network called @HOMED689 . For some reason my Windows 8 machines keep trying to connect to this SSID automatically.
I've never tried to connect to it. Once it's connected however, with limited connectivity, I don't have the ability to right click on it and say "Forget this network" or do anything to it such as when I connect to another wireless it says:
Show Estimated Data Usage
Set as Metered Connect
Forget this Network
View Connection Properties
Nothing.
View 7 Replies
View Related
Oct 2, 2013
I upgraded to 8.1 and now my wireless connectivity is lost. I have installed the latest driver model for my device but still it is not working
View 9 Replies
View Related
Nov 19, 2013
Wireless adapter tripping out after upgrading Win 8 to windows 8.1? Computer used to work fine on Win 8. Now I cant download large files or watch TV or you Tube or live Football 30 feet away from the Router. Yet it worked good on Windows 8. Is it possible to return to Windows 8? I did not make a Restore USB at Windows 8 but did a Restore USB for Win 8.1.
View 4 Replies
View Related
Aug 14, 2013
I installed Windows 8.1 build 9471 into my desktop. I use a TP Link TL-WN781ND wireless adapter to access my home network and the internet. I tried copying the drivers from Windows/System32/Drivres and installing them manually, I also downloaded the exe from the site but they still wouldnt connect. It would just say no connections found.
View 7 Replies
View Related
May 3, 2013
As the title says, I'm getting a box saying "An unexpected error has occurred" whenever I try and access the properties window for my ethernet adapter. An unexpected power outage earlier in the day rendered my Windows 8 installation half messed up, leaving most of my drivers corrupt, so I had to attempt a refresh today, which solved most of my problems.
Unfortunately others like this have been cropping up since the refresh. I've looked for other possible solutions to this problem, and none have worked so far. Re-registering DLL files solved nothing, a system file check didn't do anything, and making sure I was in the correct user groups didn't solve anything either.
View 3 Replies
View Related
Dec 21, 2013
I just bought my daughter a Lenovo running Windows 8 and when I try to connect to my Wi-Fi I am getting Limited connection only and can't figure it out.
View 5 Replies
View Related
Apr 28, 2014
This is a boot up timing issue, registry fix for network comming up. I am on a wired LAN which works ok. However, recently when booting I am getting the message cannot connect to network drives - these are mapped drives to NAS boxes.
However, when I access the drives the 'red X's' change to the network symbol and access is working. Its seems the computer wants to connect before the network is up. It is not a credential issue, but boot order. Is there anyway to make the network come up before the computer wants to map to it. Not a problem but a nag.
View 4 Replies
View Related
May 18, 2013
Only just a few days ago did this problem begin. During any session, my wireless adapter will become totally unresponsive and then all of my media connections will become inactive and disconnected. I try to run an ipconfig and it just lists everything as disconnected.
I am thinking that this isn't a driver problem because the wireless internet works up until this happens. I use a d-link usb-wireless adapter but that shouldn't be the problem because even my ethernet becomes disconnected when this issue occurs.
View 1 Replies
View Related
Jan 23, 2014
Wifi worked, walked away for 10 minutes, then found that it didn't. I would normally just reset the router, but I live in an apartment building and the router is in my landlords office.
When I did ipconfig /all, my ip started with 169, which I know isn't normal. But when I try to do a /release and /renew, I get the error "No operation can be performed on local area connection *14 while it has it's media disconnected." I am unable to attempt a wired connection, as the router is not accessible to me.
.I'm not sure if this is a router issue, or an issue with my laptop (less than a year old.) I am a grad student and I currently have to do most of my work via my iphone, which is getting very inconvenient.
View 3 Replies
View Related
Jan 26, 2014
I have two desktop PCs connected to my router, one named Mirabel running Win7 Pro, and one named Bessie running Win Server 2008 R2 (both 64-bit). These can see each other quite happily.
I just installed Windows 8.1 Pro 64-bit on my Dell Vostro 3750 lap top, which I named Rosie, but am having problems connecting to the other machines.
When I go to the Network node in Windows Explorer on Rosie, I can't see either of the other two machines, but if I type Bessie in the address bar, it shows me the two drives that are shared. However, if I try and explore either of these, I get the following error...
The laptop is part of a workgroup, imaginatively named "Workgroup" as are the other two machines...
I changed the properties of the TCP/IP v4 to match the ones on the other two machines (with a different IP address of course) but this didn't work.
The odd thing is that I can browse the shared drives on Mirabel without any problem. In case it's relevant, both desktop machines can browse Rosie without problems. Windows 8 has changed so much from Win7, and it's wasting a lot of time trying to get it set up.
View 7 Replies
View Related
Apr 7, 2014
Installed windows 8 on blank HD. Version was enterprise. Went through installation process, then discover that the wireless adaptor (laptop, built in) wasn't being recognized FULL stop by windows. I tried a few things. In the device manager, the wireless adaptor is not shown. However, after updating the device list, it shows one unknown device.
I looked through the preloaded drivers for wireless devices, but all of them were for USB ethernet/wireless adaptors, which as I recall from my previous installation of windows was not the type of driver that the device was using. I've also gone through the automates troubleshooting, etc, but nowhere is it even acknowledged that the device is even there. Now, my initial thinking is that it is indeed something to do with the drivers, but I'm not sure if I can find the needed ones. I'll upload more detailed information about my setup if it would be useful.
View 6 Replies
View Related
Feb 14, 2014
So, I woke up this morning and realized the the wifi adapter on my ThinkPad 430 is disabled. It's been working perfectly fine for a couple years, but as of this AM it didn't work. My smart phone can connect to the wifi access point just fine. What I can check to get it working again?
I have Windows 8.
View 4 Replies
View Related
Mar 28, 2013
I brought my laptop to work and wanted to connect to my work's network so I could access our shared networks. In the past I was able to log into my work's domain, nahrc, with my user name and password via the ctrl+alt+dlt method fromt he log on screen. I can plug in the ethernet cable into my laptop, and the nahrc network appears in the wired connections area, but I can't seem to connect/access our shared drives. Is it possible to log into my laptop like you could in windows 7 and access my account, or is this just not possible anymore.
View 1 Replies
View Related
Jun 16, 2013
Sometimes when I boot up my computer the wired network doesn't connect. I cannot connect to it unless I reboot my computer. Then iti works fine. The connection seems random and sometimes it works and other times it doesn't. If it does connect there is never a crash or error of it not working.
I have the asus P8Z77-V PRO
I disabled my wireless adapter to try but still same issues.
View 9 Replies
View Related
Feb 4, 2014
My friend got a new computer and is trying, unsuccessfully, to connect to a network printer that he says he has used in the past, in his one man office. He gets his internet access through a wireless router. But the printer is connected via Ethernet cable to a second router that does not have internet access, but does have two printers connected to it.
So his new computer is connected to two different networks, the wireless network, and the wired network. I'm not familiar with having your computer connected to two networks simultaneously.
So my question is, is there any problem doing it like this, and should the network printers show up when the computer does a search in Add Printer? Because it does not find anything right now, not sure if we need to be looking at the printers, the router, or the computer.
He is not able to connect the printers to the wireless router, they are in different rooms. And there are no other computers connected to either network right now.
View 1 Replies
View Related
Aug 19, 2014
I recently got a 2 slot card but seems to be 1 cm away from my wireless network adpater. When booting up, everything runs fine except I'm unable to connect to the internet. I'm wondering if the GPU is blocking the adapter. The GPU is running at 30 celcius
View 2 Replies
View Related
Aug 27, 2014
I tried everything I know but can't seem to get back my wifi card to work.
View 9 Replies
View Related
Sep 5, 2012
I have this usb 2 wireless adapter which worked fine on windows 7, ive just installed Windows 8 and have tried to install this WLAN adapter but its not working. It comes up in device manager as a usb 2.0 WLAN with drivers not installed but when I try and manually install them I just get The hash for the file is not present in the specified catalog file error
View 9 Replies
View Related
Jun 5, 2014
After updating my windows 8 computer and restarting it I found I was unable to connect via wireless internet. I'm currently connected with a Ethernet cable.
View 1 Replies
View Related
Oct 16, 2013
I upgraded to windows 8 and have had no problem when I booted up my compaq presario. I was not online went to the control panel to troubleshoot my internet connection and was told that my Ethernet doesn't have a valid IP configuration and that "Default gateway" is not available. I am hardwired into my AT&T router (the same router that is serving three other laptops in my home without any problems). I downloaded the v1.7.0.0 driver but I'm not sure if it installed as I am still having to manually reset my ethernet adaptor via the control panel each time I restart the computer.
View 1 Replies
View Related
Jul 24, 2014
When you first connect to a new network Windows 8.1 opens up the following window:
I am trying to automate a way so that the answer is always: yes, turn on sharing and connect to devices.
It needs to be automatic without requiring the user to click on the window. This will be used in systems where no keyboard/screen/mouse are present.
View 8 Replies
View Related
Apr 4, 2014
For some reason I can connect fine when I plug in my wireless receiver port into it, But 30 seconds after I plug it in, the bars disappear And a red X appears over it, if you click on it it'll say no networks found.... The only way to fix it is to plug it in and after 30 seconds it happens again...I'm only getting this on my computer, And it's gotten really bad recently, I've tried replacing the reciever, But that fixed it for maybe an hour....
View 4 Replies
View Related
