Network / Sharing :: Connecting Then Suddenly No Networks Found
Apr 4, 2014
For some reason I can connect fine when I plug in my wireless receiver port into it, But 30 seconds after I plug it in, the bars disappear And a red X appears over it, if you click on it it'll say no networks found.... The only way to fix it is to plug it in and after 30 seconds it happens again...I'm only getting this on my computer, And it's gotten really bad recently, I've tried replacing the reciever, But that fixed it for maybe an hour....
I just got Windows 8 a week or so ago and I left it on today. I came home and my internet suddenly couldn't find any networks. I googled how to get it back, but when I go to pc settings there is no Wireless tab. I cant turn it on, I've tried reinstalling my wireless card LAN driver, restarting my PC and doing a system restore to the last recommended time, nothing works.
Using Windows 8, machine is 3 months old. HP Ultrabook. Wifi had been working fine until just now. There are over a dozen WiFi networks available, but my laptop says 'No networks found'. Other laptops have no problem connecting.
When I refresh networks, I see all the networks I should (we have an extender, so there are two regions on our house) -- but I also see one called Hidden Network. How do I find out what that is? There are no nearby houses. This has to be emanating from my house.
My laptop is few months old HP Pavilion g6 OS: Windows 8 uses a ralink rt5390r 802.11bgn wifi adapter.
The wifi was working just fine suddenly it stopped. It detects my home network but every time it tries to connect ends up "unable to connect to this network". It connects to my friends wifi but not mine. And it connects with cable.
There is a red cross on the wifi network but it's green not GREY. It is not a modem problem because the other PC connects just fine. When I'm on wifi, cmd ipconfig gives me disconnected media for all the network cards on the laptop. Command netsh shows failure and access denied.
What I have tried to do for the past week :
I upgraded the adapter/ driver. My windows is fully updated. I re-installed the network card. I tried a USB wifi. I uninstalled the private server. I uninstalled my Norton because I thought it was blocking the connection I also deactivated the windows fire wall. I changed the SSID and PSW ... nothing worked. and of course I tried restarting, resetting, rebooting, deactivating and activating, disabling and enabling every single thing but nothing works.
This is a problem that has persisted under fresh installs of Windows 7 and Windows 8. My laptop (Samsung Series 9) won't connect to any network that is operating on the 2.4GHz band. It shows up as a normal network, but trying to connect always ends with the error message: "Can't connect to this network."
The WiFi card is an Intel Centrino 6300. Before someone tells me to go connect to a different network,
Recently, my Windows 8 has been working fine, but when I woke up this morning, I was not able to access the Internet. It has been int he same spot for the last few days and Internet was perfect, but this morning, it would not connect to any. Basically, it won't even list any. I know I'm not too far away and I'm sure it's still working because:
1) My father and sister are using it. 2) I've gone to two different houses with different internet, nothing changed.
I've been trying to fix it since 7 this morning and I feel like I'm going to just burst into tears of frustration. My audio is also not working, but I care more of getting the Internet working. And my computer will not allow me to turn on Windows Security Center.
I have network and printer connection problems. I need to ask some basic questions before giving details.
Using new Sagemcom F@st 1704N combo modem/router (replacing an old fried Sagemcom 4300 single function modem) wired to a previously used Linksys/Cisco 610N router which was, and is wired to 3 WAPs in more remote locations.
Are these assumptions correct?
1 The new network SSID is coming from the 1704 combination modem router.
2 The old network SSID is broadcast by the remote WAPs, but not by the old 610N device.
3 Can a network printer (Brother MFC-8810 DW wireless network device) be configured to work with 2 or more wireless networks at the same time.
4 As a workaround is it it possible to configure a Windows 8.1 laptop computer using Bluetooth to connect to the router and printer.
In prior versions of Windows before Windows 8, it was very easy to refresh your network list. This would allow you to see ALL of wireless networks in your area that your WiFi card could detect.
My Windows 8 only allows me to see the wireless networks that it wants me to see.
How do I see all Windows 8 networks within range? I have searched but I cannot find anything.
Recently upgraded my laptop to Windows 8.1 and I cannot see any 5Ghz wireless networks, even though they are present (I am able to successfully see and connect using other devices including a Windows 7 laptop). I can see 2.4 Ghz networks and connect no problem. I have upgraded the wifi driver to the latest Windows 8.1 version for the Intel Wireless-N 7260 card, v16.6.0.8 but no luck.
Windows 8.1, Broadcom 802.11n network card&driver,
My computer stopped recognizing the wireless networks at my university - oddly enough, some other networks elsewhere can be found (although I cannot test if I can actually connect to them, since they are passworded/not mine).
I followed the 3 steps of Network Posting Tips
Xirrus Wi-Fi Inspector showed nothing: Connection - Broadcom 802.11n network card - NA, everything under Wireless and Addresses also NA. No networks.
I just bought my daughter a Lenovo running Windows 8 and when I try to connect to my Wi-Fi I am getting Limited connection only and can't figure it out.
This is a boot up timing issue, registry fix for network comming up. I am on a wired LAN which works ok. However, recently when booting I am getting the message cannot connect to network drives - these are mapped drives to NAS boxes.
However, when I access the drives the 'red X's' change to the network symbol and access is working. Its seems the computer wants to connect before the network is up. It is not a credential issue, but boot order. Is there anyway to make the network come up before the computer wants to map to it. Not a problem but a nag.
I have an Asus computer running windows 8. When I open the network connections I cant see the list of available networks. I see my own connection to the internet which is named Network but that is all I see. when I check it on my laptop also running windows 8 I see a full list of available networks. Is there a setting in windows that will allow me to see this or is something blocking the list from being displayed.
I am using internet via usb modem. Its working fine, but when i open Settings>>Change PC Settings>>Networks I can see WiFi, Ethernet & VPN but not my internet connection. I have attached a screenshot, and my internet is connected when i am taking the screenshot.
The icon in the lower right of my desktop tells me that I have networks available, but is not currently connected. When I click it to open the little box that has the available networks listed, nothing happens other than the icon shading changing letting me know it actually has been clicked. No box opens. Ive tried restarting and even creating a new user, but nothing worked
I got the idea from my roommate to boot it in safe mode, which I did, but now I can't log in due to it asking me for a password that i dont use. I used a 4 digit pin to log in, and it's now asking me for a password. I've tried every password I can think of, but I can't get it, and there doesn't seem to be a "I forgot my password" option.
I have several computers on my Wireless/Wired Network. Wireless is dual band and Secured with WP2 Password. Basically on several of my PCs I can see connections to my neighbours computers showing as Windows Media Player Icons. When I first noticed this I fully restored my router (Western Digital) creating new SSIDs and Passwords, however I can still see these computers.
I'm not personally bothered that I can see them as I can always click remove device, I'm more interested WHY I can see them and Can they see my computers as I do have some without Password Protected sharing as I assumed only devices on my network could access these.
My PCs are Running a Mix of Windows 8.1 and 7 and both can see the 2 neighbour computers. I have homegroup set up with a secured password too.
Wifi worked, walked away for 10 minutes, then found that it didn't. I would normally just reset the router, but I live in an apartment building and the router is in my landlords office.
When I did ipconfig /all, my ip started with 169, which I know isn't normal. But when I try to do a /release and /renew, I get the error "No operation can be performed on local area connection *14 while it has it's media disconnected." I am unable to attempt a wired connection, as the router is not accessible to me.
.I'm not sure if this is a router issue, or an issue with my laptop (less than a year old.) I am a grad student and I currently have to do most of my work via my iphone, which is getting very inconvenient.
I have two desktop PCs connected to my router, one named Mirabel running Win7 Pro, and one named Bessie running Win Server 2008 R2 (both 64-bit). These can see each other quite happily.
I just installed Windows 8.1 Pro 64-bit on my Dell Vostro 3750 lap top, which I named Rosie, but am having problems connecting to the other machines.
When I go to the Network node in Windows Explorer on Rosie, I can't see either of the other two machines, but if I type Bessie in the address bar, it shows me the two drives that are shared. However, if I try and explore either of these, I get the following error...
The laptop is part of a workgroup, imaginatively named "Workgroup" as are the other two machines...
I changed the properties of the TCP/IP v4 to match the ones on the other two machines (with a different IP address of course) but this didn't work.
The odd thing is that I can browse the shared drives on Mirabel without any problem. In case it's relevant, both desktop machines can browse Rosie without problems. Windows 8 has changed so much from Win7, and it's wasting a lot of time trying to get it set up.
In my network 4 Desktop running windows XP all are connected LAN cable and my modem is tplink and 1 laptop running windows 8.1 pro accessing network through wireless in my laptop network place all the pcs are visible but I am not able to ping them and when I click I am getting message that Network path not found Error code 0x80070035
I have to PC's that belong to the same homegroup. When I go to explorer, there is a delay before the other PC shows up and yet another delay when I select to browse that PC. If I close and go back I'll often get this error code and then there are time when I get the code on the first try. These PCs are running Windows 8.1 Pro and powered on 100% of the time. I noticed this nonsense while on Windows 7 as well.
I brought my laptop to work and wanted to connect to my work's network so I could access our shared networks. In the past I was able to log into my work's domain, nahrc, with my user name and password via the ctrl+alt+dlt method fromt he log on screen. I can plug in the ethernet cable into my laptop, and the nahrc network appears in the wired connections area, but I can't seem to connect/access our shared drives. Is it possible to log into my laptop like you could in windows 7 and access my account, or is this just not possible anymore.
Sometimes when I boot up my computer the wired network doesn't connect. I cannot connect to it unless I reboot my computer. Then iti works fine. The connection seems random and sometimes it works and other times it doesn't. If it does connect there is never a crash or error of it not working.
I have the asus P8Z77-V PRO
I disabled my wireless adapter to try but still same issues.
My friend got a new computer and is trying, unsuccessfully, to connect to a network printer that he says he has used in the past, in his one man office. He gets his internet access through a wireless router. But the printer is connected via Ethernet cable to a second router that does not have internet access, but does have two printers connected to it.
So his new computer is connected to two different networks, the wireless network, and the wired network. I'm not familiar with having your computer connected to two networks simultaneously.
So my question is, is there any problem doing it like this, and should the network printers show up when the computer does a search in Add Printer? Because it does not find anything right now, not sure if we need to be looking at the printers, the router, or the computer.
He is not able to connect the printers to the wireless router, they are in different rooms. And there are no other computers connected to either network right now.
I am using the N600 Wireless Dual Band Gigabit ADSL2+ Modem Router DGND3700v2 This has 2 channels 2.5ghz and 5ghz .
On my main desktop windows 8 has sucessfully found and connected wirelessly to the 2.5ghz connection. However, when I want to do video streaming the 5ghz connection would be better.
On my other devices I can search / scan for all available connections and I can see both the 2.5 and the 5 connections. For example, my laptop running windows 7 can see both connection and I can choose which one i want to connect too.
However, Windows 8 seems to have locked into the 2.5ghz connection and cannot see the 5ghz connection . Is there a way to force Windows 8 to scan again so it can see the 5ghz connection ?
I have a Netgear WN111 wireless adapter on my PC. Since installing Windows 8.1 it doesn't connect automatically to the router. The PC says there are no connections available, so I can't even click on the router to try to connect. If I pull the adapter out and push it back into the USB port it connects automatically. Also, when I switch the PC off, the LED on the adapter continues to flash, so I have to pull it out and plug it in again to stop that. I've tried troubleshooting, compatibility check, reinstalling the driver and uninstalling the driver and getting Windows to install one itself.
