Network / Sharing :: How To Hide Hidden Networks Button
Sep 15, 2014know if there is a way to hide the hidden network button.
View 9 Repliesknow if there is a way to hide the hidden network button.
View 9 RepliesWhen I refresh networks, I see all the networks I should (we have an extender, so there are two regions on our house) -- but I also see one called Hidden Network. How do I find out what that is? There are no nearby houses. This has to be emanating from my house.
View 2 Replies View RelatedWould it be possible to hide the 'Network Locations' in the 'My Computer' section in 8.1?
View 2 Replies View RelatedIs there a way to hide devices connected to LAN port 4 on a modem-router from devices connected to the other 3 ports? And also in the other direction: hide all devices on ports 1 2 3 from anything attached to port 4 ?
Instead of specifying by LAN port, the white list of things to see each other could be selected by MAC address, as I only have three things I want to see and be seen on my home network. A black list system is no good because unknown new things might get connected to LAN port 4.
I have an unusual networking situation... I disabled wireless in my modem-router, so only the 4 ethernet ports work.
I have a desktop (Win 7) a laptop (Win 8.1) and a NAS connected to the router's ports 1 and 2 and 3. They are networked by a password protected homegroup.
I share my internet service with a friend in the next apartment, by one ethernet cable attached to port 4 on my modem-router. Now her friends are staying there while she is away for a few months. They are not easy to negotiate with and I can't ask them to make any changes to their computers.
It seems they have added some kind of switch or hub at their end of that one cable, because I often see two or more strange PCs listed in Windows Explorer networks folder. It even lists the 3 usernames on their PCs.
I shouldn't simply disconnect their ethernet cable, or they won't have internet access, but I don't like how their PCs show up in Windows Explorer. Also I guess my three devices are shown on their computers (but probably none of my folders are actually readable by them)
It seems "network discovery" is not selective about what devices it finds. It is simply on or off, and it must stay on for my homegroup network to work.
Should I try a different kind of networking in Windows, instead of a homegroup?
My laptop is few months old HP Pavilion g6 OS: Windows 8 uses a ralink rt5390r 802.11bgn wifi adapter.
The wifi was working just fine suddenly it stopped. It detects my home network but every time it tries to connect ends up "unable to connect to this network". It connects to my friends wifi but not mine. And it connects with cable.
There is a red cross on the wifi network but it's green not GREY. It is not a modem problem because the other PC connects just fine. When I'm on wifi, cmd ipconfig gives me disconnected media for all the network cards on the laptop. Command netsh shows failure and access denied.
What I have tried to do for the past week :
I upgraded the adapter/ driver. My windows is fully updated. I re-installed the network card. I tried a USB wifi. I uninstalled the private server. I uninstalled my Norton because I thought it was blocking the connection I also deactivated the windows fire wall. I changed the SSID and PSW ... nothing worked. and of course I tried restarting, resetting, rebooting, deactivating and activating, disabling and enabling every single thing but nothing works.
Is it possible to use 2 separate networks using Windows XP?
View 1 Replies View RelatedThis is a problem that has persisted under fresh installs of Windows 7 and Windows 8. My laptop (Samsung Series 9) won't connect to any network that is operating on the 2.4GHz band. It shows up as a normal network, but trying to connect always ends with the error message: "Can't connect to this network."
The WiFi card is an Intel Centrino 6300. Before someone tells me to go connect to a different network,
I just got Windows 8 a week or so ago and I left it on today. I came home and my internet suddenly couldn't find any networks. I googled how to get it back, but when I go to pc settings there is no Wireless tab. I cant turn it on, I've tried reinstalling my wireless card LAN driver, restarting my PC and doing a system restore to the last recommended time, nothing works.
View 9 Replies View RelatedRecently, my Windows 8 has been working fine, but when I woke up this morning, I was not able to access the Internet. It has been int he same spot for the last few days and Internet was perfect, but this morning, it would not connect to any. Basically, it won't even list any. I know I'm not too far away and I'm sure it's still working because:
1) My father and sister are using it.
2) I've gone to two different houses with different internet, nothing changed.
I've been trying to fix it since 7 this morning and I feel like I'm going to just burst into tears of frustration. My audio is also not working, but I care more of getting the Internet working. And my computer will not allow me to turn on Windows Security Center.
I have network and printer connection problems. I need to ask some basic questions before giving details.
Using new Sagemcom F@st 1704N combo modem/router (replacing an old fried Sagemcom 4300 single function modem) wired to a previously used Linksys/Cisco 610N router which was, and is wired to 3 WAPs in more remote locations.
Are these assumptions correct?
1 The new network SSID is coming from the 1704 combination modem router.
2 The old network SSID is broadcast by the remote WAPs, but not by the old 610N device.
3 Can a network printer (Brother MFC-8810 DW wireless network device) be configured to work with 2 or more wireless networks at the same time.
4 As a workaround is it it possible to configure a Windows 8.1 laptop computer using Bluetooth to connect to the router and printer.
For some reason I can connect fine when I plug in my wireless receiver port into it, But 30 seconds after I plug it in, the bars disappear And a red X appears over it, if you click on it it'll say no networks found.... The only way to fix it is to plug it in and after 30 seconds it happens again...I'm only getting this on my computer, And it's gotten really bad recently, I've tried replacing the reciever, But that fixed it for maybe an hour....
View 4 Replies View RelatedHome Office Setup.
Network 1 Office use
Network2 Personal Use.
User 1 Office Use
User 2 Home use.
Same Windows 8 PC.
Can I automatically switch WiFi network as I switch User?
1 WIFI Connection on PC
Using Windows 8, machine is 3 months old. HP Ultrabook. Wifi had been working fine until just now. There are over a dozen WiFi networks available, but my laptop says 'No networks found'. Other laptops have no problem connecting.
View 8 Replies View RelatedIn prior versions of Windows before Windows 8, it was very easy to refresh your network list. This would allow you to see ALL of wireless networks in your area that your WiFi card could detect.
My Windows 8 only allows me to see the wireless networks that it wants me to see.
How do I see all Windows 8 networks within range? I have searched but I cannot find anything.
Recently upgraded my laptop to Windows 8.1 and I cannot see any 5Ghz wireless networks, even though they are present (I am able to successfully see and connect using other devices including a Windows 7 laptop). I can see 2.4 Ghz networks and connect no problem. I have upgraded the wifi driver to the latest Windows 8.1 version for the Intel Wireless-N 7260 card, v16.6.0.8 but no luck.
View 9 Replies View RelatedWindows 8.1, Broadcom 802.11n network card&driver,
My computer stopped recognizing the wireless networks at my university - oddly enough, some other networks elsewhere can be found (although I cannot test if I can actually connect to them, since they are passworded/not mine).
I followed the 3 steps of Network Posting Tips
Xirrus Wi-Fi Inspector showed nothing: Connection - Broadcom 802.11n network card - NA, everything under Wireless and Addresses also NA. No networks.
My home adsl modem works.
I prefer to keep my home WiFi network from public view by disabling the SSID broadcast, i.e "hiding" the network.
With two modem/routers (a Belkin Play Max F7D4401 ADSL modem/router and now a Cisco EPC2325 DOCSIS modem/router) on two computers (home-built desktop and Acer TM8172T notebook), after the initial connection Windows 8 Pro would not reconnect without tediously re-entering the SSID name and password. Once it does connect, it displays the original SSID name with a new one with an incrementally increasing appended number like:
I was manually deleting them all (except the original) using netsh, until I realized you can <right-click> on an entry in the screen above and choose "Forget this network."
This is the process I go through each time to re-connect. Is there something I'm missing?
I read that if Windows 8 saves too many WiFi connections, it cannot "remember" them to automatically reconnect to them, so on the notebook, I deleted all but wpcTrue (the original), and it now automatically reconnects, although occasionally it will add a new connection with an incrementally increased number -- currently the notebook shows both wpcTrue and wpcTrue 2. I had used the notebook on the road, so had about five WiFi connections saved. On the Desktop my home network is the only WiFi connection I've ever made. However, no matter what I do on the desktop, it NEVER remembers to automatically log on when the SSID is not broadcast.
I even tried manually setting up a connection via Network and Sharing Center > Set up a new connection or network, to no avail -- the desktop computer will not automatically reconnect.
I doubt that this is relevant, but the Belkin modem/router, the Belkin USB adapter I use on my desktop computer, and the notebook's Broadcom internal modem are all b/g/n. The Cisco modem/router is b/g.
If I "unhide" the SSID, i.e. broadcast the SSID, all is well in the world. Both computers automatically reconnect to the modem/router. If I hide the SSID, and then disconnect or reboot, the desktop computer will not automatically reconnect.
I just noticed that the pop up WiFi connection column shows "WiFi-2 Off" -- what does the "Off" mean?
And, why is it "-2" ? My notebook just shows "WiFi', period. (The first image with "WiFi (Off)" was from a previous Windows 8 installation on the desktop computer. I decided to change from EFI-boot to non-EFI so reinstalled Windows 8. I simply used the old image as a quick way to show how the connection name assignment runs away.)
I have an Asus computer running windows 8. When I open the network connections I cant see the list of available networks. I see my own connection to the internet which is named Network but that is all I see. when I check it on my laptop also running windows 8 I see a full list of available networks. Is there a setting in windows that will allow me to see this or is something blocking the list from being displayed.
View 5 Replies View RelatedI am using internet via usb modem. Its working fine, but when i open Settings>>Change PC Settings>>Networks I can see WiFi, Ethernet & VPN but not my internet connection. I have attached a screenshot, and my internet is connected when i am taking the screenshot.
View 9 Replies View RelatedThe icon in the lower right of my desktop tells me that I have networks available, but is not currently connected. When I click it to open the little box that has the available networks listed, nothing happens other than the icon shading changing letting me know it actually has been clicked. No box opens. Ive tried restarting and even creating a new user, but nothing worked
I got the idea from my roommate to boot it in safe mode, which I did, but now I can't log in due to it asking me for a password that i dont use. I used a 4 digit pin to log in, and it's now asking me for a password. I've tried every password I can think of, but I can't get it, and there doesn't seem to be a "I forgot my password" option.
I have several computers on my Wireless/Wired Network. Wireless is dual band and Secured with WP2 Password. Basically on several of my PCs I can see connections to my neighbours computers showing as Windows Media Player Icons. When I first noticed this I fully restored my router (Western Digital) creating new SSIDs and Passwords, however I can still see these computers.
I'm not personally bothered that I can see them as I can always click remove device, I'm more interested WHY I can see them and Can they see my computers as I do have some without Password Protected sharing as I assumed only devices on my network could access these.
My PCs are Running a Mix of Windows 8.1 and 7 and both can see the 2 neighbour computers. I have homegroup set up with a secured password too.
My wife's ASUS Win 8 laptop on a local network some how got connected to "Hidden Network" instead of the Normal ZFHL2. She was unable to shutdown last night. Finally she pulled the battery to power down. This morning after re-installing the battery, boot was normal and the connection was ZFHL2. We removed the "Connect Automatically" check from hidden network but it comes right back. We would like to remove hidden network to prevent this from re-occurring, we have not found a way to do that.
View 6 Replies View RelatedI am using the N600 Wireless Dual Band Gigabit ADSL2+ Modem Router DGND3700v2 This has 2 channels 2.5ghz and 5ghz .
On my main desktop windows 8 has sucessfully found and connected wirelessly to the 2.5ghz connection. However, when I want to do video streaming the 5ghz connection would be better.
On my other devices I can search / scan for all available connections and I can see both the 2.5 and the 5 connections. For example, my laptop running windows 7 can see both connection and I can choose which one i want to connect too.
However, Windows 8 seems to have locked into the 2.5ghz connection and cannot see the 5ghz connection . Is there a way to force Windows 8 to scan again so it can see the 5ghz connection ?
On Windows 7 I used to have an option to use the WPS button on the router to setup wifi but I am unable to find that option in Windows 8. Is this still an option and if so where is it located?
View 9 Replies View RelatedI have just upgraded my laptop(Toshiba Satellite P875). From Windows 8 to 8.1 and now the airplane mode button does not switch the mode on and off??? I can go inside the settings and do it. But the button on the keyboard panel does nothing?
View 4 Replies View RelatedMy Internet is fine. I can connect with my iPhone, and with Ubuntu OS.
It's just the button in the bottom right hand corner (the wireless signal bars) doesn't do anything after I click it on my windows laptop.. It happens every so often disallowing me from connecting to the Internet in times when I need it.
My Internet connection icon/button (either on the desktop to the right of the task bar or on the settings when you slide in from right) doesn't work...
I mean when I click it it does absolutely nothing. Also, when I open the network and sharing center after clicking change adapter settings it loads forever.. I've got work to do and I need the Internet.. I don't know what to do I can't keep switching to Ubuntu..
If I disable file and printer sharing for microsoft networks under network and sharing, will it make me safer?
Screenshot: Screenshot by Lightshot
Also would disabling NetBios over TCP/IP make me safer?
Screenshot: Screenshot by Lightshot
My Lenovo y580 is connected to my wireless network but no other wireless ever show up in the Networks Charm. My wireless network that I am connected is not displayed either. This does not allow me to pick up any new networks when I leave my home. I have tried a lot of basic things but nothing seems to work.
View 11 Replies View RelatedWhen I upgraded to Win8.1, it asked if I wanted to automatically connect to my hidden network. I've never set up a hidden network. Sometimes it shows up in my list of WiFi connections. My computer also shows me as belonging to a workgroup, which I never joined. Then one day another network showed up called TOA24 and it was set up to automatically connect. Now it shows up every time I connect to my WiFi connection. Is it possible to determine how my computer joined a workgroup without my knowledge or created a hidden network? I have Norton Security Suite (through Comcast) running on this computer.
System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 8.1 Pro, 64 bit
Processor: Intel(R) Core(TM) i7-3610QM CPU @ 2.30GHz, Intel64 Family 6 Model 58 Stepping 9
Processor Count: 8
RAM: 8087 Mb
Graphics Card: Intel(R) HD Graphics 4000, -1984 Mb
Hard Drives: C: Total - 931493 MB, Free - 823816 MB; D: Total - 22071 MB, Free - 2286 MB; F: Total - 98 MB, Free - 66 MB;
Motherboard: Hewlett-Packard, 181C
Antivirus: Windows Defender, Disabled
I just got a hold of a laptop thats using 8.1. It acutally came with it, but I'm viewing that as a good thing, so I can get some experience with this OS. My questions is a simple one, is there any way to hid either your last name, or your username when logging into 8.1?
I'm not a big fan of my last name being displayed when I lock my computer, or log into it. I don't mind having on my microsoft account, I'd just rather it only show my first name.