My Lenovo y580 is connected to my wireless network but no other wireless ever show up in the Networks Charm. My wireless network that I am connected is not displayed either. This does not allow me to pick up any new networks when I leave my home. I have tried a lot of basic things but nothing seems to work.
View 11 Replies
Lenovo Y580 with a blu-ray reader/dvd burner. Running Windows 8.1. Read DVD's fine just doesn't want to burn them. I can't add data to a dvd, backup a movie, format a dvd. When trying to format a dvd I get the error, after the drive runs for awhile, "Cannot complete format".
View 8 Replies View RelatedIn prior versions of Windows before Windows 8, it was very easy to refresh your network list. This would allow you to see ALL of wireless networks in your area that your WiFi card could detect.
My Windows 8 only allows me to see the wireless networks that it wants me to see.
How do I see all Windows 8 networks within range? I have searched but I cannot find anything.
How to hid all the partitions in the factory installed HDD for Lenovo Y580.
This is the scenario.
Firstly, i successfully migrated all of the following partitions:
OEM/Hidden partition,
C partition: boot drive/ program files and data drive &
D partition: containing drivers
from my Lenovo factory installed HDD to the SSD and to use the SSD as the primary boot drive . Now, i plan to use the factory installed HDD as my data drive. (I am using a caddy tray for this whereby i plan to swap out the optical drive and pluck in the Lenovo factory installed HDD). However, for "safety reasons" i do not plan to re-format the entire factory installed HDD but rather to keep those partitions just in case if my SSD fails.
Hence, how do i turn all the three partitions above (in the Lenovo factory installed HDD) to become dormant? I want the computer to boot up from the existing SSD but then to treat the factory installed HDD as the data drive and not to read from any of the three partitions in the factory installed HDD.
I am planning to use EASUS as my disk partition freeware.
I am using the N600 Wireless Dual Band Gigabit ADSL2+ Modem Router DGND3700v2 This has 2 channels 2.5ghz and 5ghz .
On my main desktop windows 8 has sucessfully found and connected wirelessly to the 2.5ghz connection. However, when I want to do video streaming the 5ghz connection would be better.
On my other devices I can search / scan for all available connections and I can see both the 2.5 and the 5 connections. For example, my laptop running windows 7 can see both connection and I can choose which one i want to connect too.
However, Windows 8 seems to have locked into the 2.5ghz connection and cannot see the 5ghz connection . Is there a way to force Windows 8 to scan again so it can see the 5ghz connection ?
In Windows 7 and Windows 8, I was able to tether a Nokia phone to my Thinkpad X220 through the creation of an ad-hoc wireless network on the phone. The phone cannot create an infrastucture wireless network like iPhones and androids do so this is my only way to tether.
It seems that in the Windows 8.1 Preview upgraded from the windows store, I can no longer see ad-hoc networks in the list of wireless networks to connect to. If RTM of 8.1 restored this feature? If not, is it possible to restore the feature somehow?
In the previous versions of Windows you could see the list of wireless networks you had previously connected to, change the order in which these Preferred Networks connected when more than one of them were available, as well as add or remove the Preferred Networks from this list. You could do so via Control PanelNetwork and InternetManage Wireless Networks.
But in Windows 8, unfortunately this feature is unavailable
It can be done manually in the cmd by these commands
Show Wireless Networks
netsh wlan show profiles
Show stored key for a Wireless Network
netsh wlan show profiles name=[profile name] key=clear
Delete Stored Wireless network
netsh wlan delete profile name=[profile name]
Or Third party software can be used to do so such as
WiFi Profile Manager 8
[URL]
When I refresh networks, I see all the networks I should (we have an extender, so there are two regions on our house) -- but I also see one called Hidden Network. How do I find out what that is? There are no nearby houses. This has to be emanating from my house.
View 2 Replies View RelatedMy laptop is few months old HP Pavilion g6 OS: Windows 8 uses a ralink rt5390r 802.11bgn wifi adapter.
The wifi was working just fine suddenly it stopped. It detects my home network but every time it tries to connect ends up "unable to connect to this network". It connects to my friends wifi but not mine. And it connects with cable.
There is a red cross on the wifi network but it's green not GREY. It is not a modem problem because the other PC connects just fine. When I'm on wifi, cmd ipconfig gives me disconnected media for all the network cards on the laptop. Command netsh shows failure and access denied.
What I have tried to do for the past week :
I upgraded the adapter/ driver. My windows is fully updated. I re-installed the network card. I tried a USB wifi. I uninstalled the private server. I uninstalled my Norton because I thought it was blocking the connection I also deactivated the windows fire wall. I changed the SSID and PSW ... nothing worked. and of course I tried restarting, resetting, rebooting, deactivating and activating, disabling and enabling every single thing but nothing works.
Is it possible to use 2 separate networks using Windows XP?
View 1 Replies View RelatedThis is a problem that has persisted under fresh installs of Windows 7 and Windows 8. My laptop (Samsung Series 9) won't connect to any network that is operating on the 2.4GHz band. It shows up as a normal network, but trying to connect always ends with the error message: "Can't connect to this network."
The WiFi card is an Intel Centrino 6300. Before someone tells me to go connect to a different network,
I just got Windows 8 a week or so ago and I left it on today. I came home and my internet suddenly couldn't find any networks. I googled how to get it back, but when I go to pc settings there is no Wireless tab. I cant turn it on, I've tried reinstalling my wireless card LAN driver, restarting my PC and doing a system restore to the last recommended time, nothing works.
View 9 Replies View RelatedRecently, my Windows 8 has been working fine, but when I woke up this morning, I was not able to access the Internet. It has been int he same spot for the last few days and Internet was perfect, but this morning, it would not connect to any. Basically, it won't even list any. I know I'm not too far away and I'm sure it's still working because:
1) My father and sister are using it.
2) I've gone to two different houses with different internet, nothing changed.
I've been trying to fix it since 7 this morning and I feel like I'm going to just burst into tears of frustration. My audio is also not working, but I care more of getting the Internet working. And my computer will not allow me to turn on Windows Security Center.
I have network and printer connection problems. I need to ask some basic questions before giving details.
Using new Sagemcom F@st 1704N combo modem/router (replacing an old fried Sagemcom 4300 single function modem) wired to a previously used Linksys/Cisco 610N router which was, and is wired to 3 WAPs in more remote locations.
Are these assumptions correct?
1 The new network SSID is coming from the 1704 combination modem router.
2 The old network SSID is broadcast by the remote WAPs, but not by the old 610N device.
3 Can a network printer (Brother MFC-8810 DW wireless network device) be configured to work with 2 or more wireless networks at the same time.
4 As a workaround is it it possible to configure a Windows 8.1 laptop computer using Bluetooth to connect to the router and printer.
know if there is a way to hide the hidden network button.
View 9 Replies View RelatedFor some reason I can connect fine when I plug in my wireless receiver port into it, But 30 seconds after I plug it in, the bars disappear And a red X appears over it, if you click on it it'll say no networks found.... The only way to fix it is to plug it in and after 30 seconds it happens again...I'm only getting this on my computer, And it's gotten really bad recently, I've tried replacing the reciever, But that fixed it for maybe an hour....
View 4 Replies View RelatedHome Office Setup.
Network 1 Office use
Network2 Personal Use.
User 1 Office Use
User 2 Home use.
Same Windows 8 PC.
Can I automatically switch WiFi network as I switch User?
1 WIFI Connection on PC
Using Windows 8, machine is 3 months old. HP Ultrabook. Wifi had been working fine until just now. There are over a dozen WiFi networks available, but my laptop says 'No networks found'. Other laptops have no problem connecting.
View 8 Replies View RelatedRecently upgraded my laptop to Windows 8.1 and I cannot see any 5Ghz wireless networks, even though they are present (I am able to successfully see and connect using other devices including a Windows 7 laptop). I can see 2.4 Ghz networks and connect no problem. I have upgraded the wifi driver to the latest Windows 8.1 version for the Intel Wireless-N 7260 card, v16.6.0.8 but no luck.
View 9 Replies View RelatedWindows 8.1, Broadcom 802.11n network card&driver,
My computer stopped recognizing the wireless networks at my university - oddly enough, some other networks elsewhere can be found (although I cannot test if I can actually connect to them, since they are passworded/not mine).
I followed the 3 steps of Network Posting Tips
Xirrus Wi-Fi Inspector showed nothing: Connection - Broadcom 802.11n network card - NA, everything under Wireless and Addresses also NA. No networks.
My home adsl modem works.
I have an Asus computer running windows 8. When I open the network connections I cant see the list of available networks. I see my own connection to the internet which is named Network but that is all I see. when I check it on my laptop also running windows 8 I see a full list of available networks. Is there a setting in windows that will allow me to see this or is something blocking the list from being displayed.
View 5 Replies View RelatedI am using internet via usb modem. Its working fine, but when i open Settings>>Change PC Settings>>Networks I can see WiFi, Ethernet & VPN but not my internet connection. I have attached a screenshot, and my internet is connected when i am taking the screenshot.
View 9 Replies View RelatedThe icon in the lower right of my desktop tells me that I have networks available, but is not currently connected. When I click it to open the little box that has the available networks listed, nothing happens other than the icon shading changing letting me know it actually has been clicked. No box opens. Ive tried restarting and even creating a new user, but nothing worked
I got the idea from my roommate to boot it in safe mode, which I did, but now I can't log in due to it asking me for a password that i dont use. I used a 4 digit pin to log in, and it's now asking me for a password. I've tried every password I can think of, but I can't get it, and there doesn't seem to be a "I forgot my password" option.
I have several computers on my Wireless/Wired Network. Wireless is dual band and Secured with WP2 Password. Basically on several of my PCs I can see connections to my neighbours computers showing as Windows Media Player Icons. When I first noticed this I fully restored my router (Western Digital) creating new SSIDs and Passwords, however I can still see these computers.
I'm not personally bothered that I can see them as I can always click remove device, I'm more interested WHY I can see them and Can they see my computers as I do have some without Password Protected sharing as I assumed only devices on my network could access these.
My PCs are Running a Mix of Windows 8.1 and 7 and both can see the 2 neighbour computers. I have homegroup set up with a secured password too.
This morning I installed an optional update from Windows Update. It was Ralink Technology WLAN 802.11 wireless LAN card.
Since then, when I try to print to my wireless network printer, the network would disconnect then come back on after a while. The update shows up in Update History as successfully installed but not in the installed updates. System restore is of no support here. The network configuration page shows normal. The web does not appear to be affected. I made a new network connection for the printer but it did not work.
Is there a way to reverse this update or should I uninstall the 802.11 LAN card and let windows re-install anew.
The printer is a HP Officejet Pro 8600e
I have a lenovo G505 laptop - it will no longer connect to my BT home hub despite it showing as being available. I suspect it might be to do with the fact that it is has a passkey - I entered it yesterday when prompted and it connected fine, but now I'm not being given the option of entering the key.
I've also tried connected using the BT wifi (as opposed to homehub) but once again it will not connect me. I've been through all the troubleshooting options, and searched under every term I can think of, but nothing is working.
Since a few weeks, I have a problem with my laptop running Windows 8.1 (Toshiba Satellite P50-A-12PBE). Sometimes, after bringing Windows back from sleep mode, I seem to have no connection to the internet. Windows says the connection is 'limited', wether I'm connected with a wire or wireless. Resetting the router doesn't solve anything, but rebooting my pc does. Since both the wired and wireless network are always simultaneously affected, I think this hasn't anything to do with drivers (I already have the latest versions by the way). I have made screenshots with ipconfig-results when I'm connected with a wire.
View 7 Replies View RelatedI upgraded to 8.1 and now my wireless connectivity is lost. I have installed the latest driver model for my device but still it is not working
View 9 Replies View RelatedAbility to do a persistent ad hoc network on windows 8 is playing a big role in a purchase decision of mine...
Setting up a persistent ad hoc wireless network with the release version of windows 8?
Recently I brought A new Laptop which Is A Dell Inspiron 17R Turbo
3D Inspiron 17R Turbo laptop | Dell India
As I had desktop So I had A broadband Wired Network Connection. But Here in my laptop I have a LAN Port but I have A Powerful Intel Centrino Wi-Fi.
is there any way to make my wired connection as a wirless So that My broadband connection would be at home but I could get its network In my laptop Anywhere I go through my Laptop Wi-Fi
This problem has just started several weeks. I use internet by my router WiFi connected to my PC it just keep disconnecting from the WiFi after i always reboot my PC then i can connect again but today i tried to restarting my computer and try to reconnect but i cannot find the WiFi network, i don't know why.
Now i am using WiFi USB, but its very slow and i also tried to disconnect it and if the WiFi network will stay or not, unfortunately directly after disconnect the USB, the WiFi disappear.
My PC is Lenovo Windows 8 ...
