In my network 4 Desktop running windows XP all are connected LAN cable and my modem is tplink and 1 laptop running windows 8.1 pro accessing network through wireless in my laptop network place all the pcs are visible but I am not able to ping them and when I click I am getting message that Network path not found Error code 0x80070035
View 2 RepliesI have to PC's that belong to the same homegroup. When I go to explorer, there is a delay before the other PC shows up and yet another delay when I select to browse that PC. If I close and go back I'll often get this error code and then there are time when I get the code on the first try. These PCs are running Windows 8.1 Pro and powered on 100% of the time. I noticed this nonsense while on Windows 7 as well.
View 7 Replies View RelatedI have to computers connect to a network. On one computer, I can access the other, but can't do the same on the other. I used to be able to but now I get the error that the path could not be found. how to get this to start working?
View 2 Replies View Relatedwindows 8.0
I was happily using file history, it was backing up to my G partition, which is located on my second hard drive (both drives are internal)but now I get error message:
I think the problem is that this partition got added to my user, that's what the network path shows:
How do I get it out of my user, and back on a normal path?
an error message in Device Manager when installing the network attached storage drives like MyBook Live, the drives themselves seem to work fine and i have access to them (most of the time) on my home netwok, however i keep getting that little yellow triangle telling me that something is wrong, specifically:
the device manager error code is This device cannot start. (Code 10)
Using Windows 8, machine is 3 months old. HP Ultrabook. Wifi had been working fine until just now. There are over a dozen WiFi networks available, but my laptop says 'No networks found'. Other laptops have no problem connecting.
View 8 Replies View RelatedWindows 8.1 Pro with Media Center,
Windows 8.1
Comcast Gateway.
Pro Media can access 8.1 Network and Homegroup.
8.1 cannot access ant Pro Media. Network Error "Windows cannot access DesktopUsersPeteDocuments' (or any other folder)
Can access IP4 address.
Windows 8.1 new machine, came with 8, updated to 8.1 then 8.1 Update.
When I know that I won't be using my PC any time soon I turn it off. However, when I got to turn it back on I notice that I don't have an internet connection.
Yes I did: Check my other (wired) PCs and they were fineCheck that my ethernet cable is plugged in - I also unplugged and plugged it back in (no difference)Log in and try to load up Google in case the connection was there, but the indicator was lagging or whatever (no difference)Try to do a ipconfig /renew (no difference)
In the end, what worked was for me to restart my computer and the connection would magically be there.
But the thing is, this has been happening to me every single morning for the past two weeks. Sure I could leave my PC on, but I did not always have this issue and leaving it on won't really fix it ...
I am using Windows 8.1 Pro Preview
Internets not found when PC turned on. Reboot PC fixes problem.
For some reason I can connect fine when I plug in my wireless receiver port into it, But 30 seconds after I plug it in, the bars disappear And a red X appears over it, if you click on it it'll say no networks found.... The only way to fix it is to plug it in and after 30 seconds it happens again...I'm only getting this on my computer, And it's gotten really bad recently, I've tried replacing the reciever, But that fixed it for maybe an hour....
View 4 Replies View RelatedCould not reconnect all network drives error at boot? I get it most of the time with a wired Ethernet connection. I've done a lot of searching and tried different things but nothing seems to work. This started a few months ago, was not there initially with Windows 8, 8.1 or 8.1.1.
With XP, you could do this to fix it:
Control Panel
Folder Options
View
Uncheck "Automatically search for network folders and printers"
This is no longer an option in Windows 8 (I think it disappeared with Vista).
As the title says, I'm getting a box saying "An unexpected error has occurred" whenever I try and access the properties window for my ethernet adapter. An unexpected power outage earlier in the day rendered my Windows 8 installation half messed up, leaving most of my drivers corrupt, so I had to attempt a refresh today, which solved most of my problems.
Unfortunately others like this have been cropping up since the refresh. I've looked for other possible solutions to this problem, and none have worked so far. Re-registering DLL files solved nothing, a system file check didn't do anything, and making sure I was in the correct user groups didn't solve anything either.
Delay in being able to access a network share? Upon going to Network and clicking on the desired computer, I get a network error; it cannot find the destination machine.
After about 30 seconds of trying and trying again, it lets me in.I go into Network:
Then I try again after a minute or so:
All my shares have their security set to allow full access to EVERYONE and are shared through your usual share and specify permission. I don't bother with Home group as this 30 second access denied routine makes the home group unusable.
I have a few other computers on the network and they all do the same thing to every other computer.
I currently am running windows 8 pro on my main computer, two days ago I had left it on for an hour or so and when I came back to it I had no internet conection and the error message I get says there is something wrong with the drivers.
I tried for a while to fix it but had no look. The conection im using is wired and the symbol in the corner has a small yellow triangle over it and says no internet access.
After getting fed up of trying to fix it I plugged in my old computer which is running windows 7 and the conection worked fine all night.
I turned on my computer today and it was working fine still and then after leaving my computer alone for an hour or so I returned to find the internet symbol in the corner with the same yellow triangle over it saying no connection and troubleshooting said something about no ip address.
The only thing I think my main computer was doing when I wasnt on it was updating AVG then when I returned it had no connection. My windows 7 computer also uses AVG but not sure if AVG has anything to do with the problem
Ive tried uninstalling avg and making sure other firewalls are off and also reinstalling drivers but had no luck.
Is there a way to setup network profiles or something so that when I bring my Surface Pro to work and connect to the wireless network there it will use the static ip address I have but when I disconnect and then connect to my home wifi it will go back to DHCP? On my MacBook Pro I can go into the network settings and change the location profile I have setup for networks but I don't see anything like this for Windows 8.
View 4 Replies View RelatedI have a Synology DS213+ NAS which is running well. Since upgrading to Windows 8.x I now get an error every time I try to copy/move a file or folder from the NAS to a UAC protected directory, i.e. C:
The error is: "Location is not available. P: is unavailable. If the location is on this PC, make sure that the device or drive is connected..." it goes on.
Anyway, if I copy the file to the desktop first, or another non UAC folder, its fine.
I am aware of Windows 8.1 causing some other issues with the NAS so I have disabled SMB2 and Large MTU.
I have witnessed this exact same problem on someone else's 213+ and Windows 8.1 so I know I am not alone.
I upgraded to Windows 8.1 and this error started happening. As soon as it did, I jumped into the Googlemobile to try to figure it out. Here is a list of what I've tried:
Uninstalled/reinstalled drivers via Device ManagerUpdated driversChanged networking drivers to and from defaultChanged 'Speed & Duplex' to and from 100 Mbps Full DuplexSwapped to a wireless connectionUpgraded router firmwarePower cyclingDeleted and reset network connectionsChanged antivirus (Using, and have been using, Webroot)
This morning I installed an optional update from Windows Update. It was Ralink Technology WLAN 802.11 wireless LAN card.
Since then, when I try to print to my wireless network printer, the network would disconnect then come back on after a while. The update shows up in Update History as successfully installed but not in the installed updates. System restore is of no support here. The network configuration page shows normal. The web does not appear to be affected. I made a new network connection for the printer but it did not work.
Is there a way to reverse this update or should I uninstall the 802.11 LAN card and let windows re-install anew.
The printer is a HP Officejet Pro 8600e
I am a home user trying to use a PPTP VPN connection from Portugal to the UK and this is a new laptop. Frustratingly the connection worked initially but I must have changed something while setting up all my stuff on here since then and I now get error 807 when trying to connect.
I can ping the VPN server but when I try to telnet to it via port 1723 it fails even though I have disconnected the Windows firewall and disabled AVG
I'm using Windows 8.1 for couple days and I connect to the internet using a pppoe connection,at first dial ALWAYS GOT
THIS ERROR : "The modem or other connecting device has reported an error"
AT SECOND always works.
I have been trying to remote into my Windows 8.1 desktop from outside my home network using the RDC program for Apple.
The basic setup from within the home network works fine. I turned on the port forwarding and DNS stuff on my ASUS router and that worked fine from within my homework network. When I go outside my home network, it get to the certificate message and then throws a tsl1_alert_internal_error and dies.
Had this problem after using advanced system care,it screwed up my whole pc.Did a reset and refresh through the window 8 ulilities but problem still persist.After resetting the pc,resetting tcp/ip stack success once but failed onwards after rebooting.Is this normal or something is wrong with pc?
View 9 Replies View RelatedI am having issues with my clients. Every time they logon, the information won't go through the PC client and load up. I get this problem in the image below.
View 2 Replies View RelatedShared printer(HP laserjet 1300) on local area network connecting problem and show "No driver found" error simple attached image.
While this was not a problem in previous Windows 8 enterprise.
Driveronwin8.1.pn
I recently bought a new laptop (Lenovo T440s, Win 8.1 Pro w/ update 1, Intel 7260AC). I've tried connecting via wireless in multiple locations, and haven't had any problems except in one location, which is at my office's public access WiFi. I can get onto the network and get internet access on my win7 laptop, and on my Surface 2. With the new Lenovo it appears that I've connected to the wireless network, but have no internet connection. When I initially select the network I get connected, and can open a web page. But then it switches to a "limited" connection and I no longer have access.
Windows defender/firewall is on. No other security things that I know of (I deleted the Norton trial that came with it).
There is a screen that comes up when I log on with any device that asks you to accept that you will not download porn, steal the firstborn child, etc. I've bookmarked the page and been able to push the button to agree, but I still lose the connection shortly after that.
I don't have the internet connection anywhere on the computer (this isn't just a browser issue).
I've tried reinstalling the wireless driver. No luck. I have the most recent version (17), and I've also tried installing the Intel PROset/wireless software as noted in this thread (BT Public Wifi works on Windows 7 but not Windows
8.). But quite honestly I'm not totally sure what to try doing after that is installed. I ran the diagnosis tool, and got a failure on the ping test (No Response: default gateway, DHCP server).
This is reg uICE (Universal Infrared Control Engine). After installing in my Win 8 64-bit machine whileI try to launch it, I am getting the error-- The task monitor failed to start.reinstall uICE. Error: The service has not been started.
Reinstalling did not work. Nor did compatibility mode installation. Basically uICE declined to start in my Win 8 64 bit. Please note that this program worked fine on my previous 32 bit version of Win 8.
Is there a way to make it work on my PC? Alternatively you can suggest me some other programs like uICE to remote control multimedia applications like WMP, VLC player, Winamp etc?
am getting winsock error 10060 the connection timed out when using Wi-Fi connecting with just one of the sites. I pinged and it's fine too. When using wired connection it works fine.
View 3 Replies View RelatedFor the past month i have been getting disconnected from my favourite game guild wars 2, after researching the error code it has been linked back to the DNS error. i have restarted, factory reset the router, restarted windows, formatted windows, disabled and re-enabled the Ethernet Port on my computer but have had no success, sometimes restarting the router fixes the problem, and sometimes it doesn't.
I have changed the ipv4 connections to use the Google server addresses, but this did not fix the problem
I have also used the ipconfig/flushdns command which also does not work
The game client Steam will connect, but Team-speak 3 and other websites will not.
I bought an Asus G75vw couple days back with windows 8. Everything was working fine except that i couldn't connect to my wireless router. It had a WEP encryption. After I entered the Network Security key, I Kept on getting "Can't connect to this network", troubleshooting didn't work either. Then I updated all drivers from Asus support website and it connected after a restart. I was quite delighted but the next day again i got the "cant connect to this network" message. So I changed my encryption to WPA2-PSK (AES) and even updated the firmware of my router. Still no luck.
View 9 Replies View RelatedI am unable to install the drivers for my NIC's getting the error 'Invalid data as shown in the images below'.
It has previously been working fine on all adapters but I needed to uninstall the network cards as HyperV was throwing up an error when creating virtual switches which may have caused this?
PS C:UsersJGAdmin> get-netadapter
Name InterfaceDescription ifIndex Status MacAddress LinkSpeed
---- -------------------- ------- ------ ---------- ---------
Ethernet 40 Intel(R) PRO/1000 PT Dual Port Netwo... 117 Not Present 0 bps
Ethernet 39 Broadcom BCM5709C NetXtreme II Gig...#2 132 Not Present 0 bps
Ethernet 38 Intel(R) PRO/1000 PT Dual Port Net...#2 131 Not Present 0 bps
Ethernet 37 Broadcom BCM5709C NetXtreme II Gi...#50 130 00-26-55-1A-A8-4A 0 bps
Ethernet 34 Intel(R) PRO/1000 PT Dual Port Net...#3 127 00-1F-29-56-C2-51 0 bps
Ethernet 33 Intel(R) PRO/1000 PT Dual Port Net...#4 126 00-1F-29-56-C2-50 0 bps
vEthernet (VLAN3 (Desk... Hyper-V Virtual Ethernet Adapter #3 71 Not Present 00-1F-29-56-C2-51 0 bps
vEthernet (VLAN2 (Serv... Hyper-V Virtual Ethernet Adapter #2 64 Up E8-39-35-14-23-2C 10 Gbps
I have tried numerous drivers with no luck all getting the same error.
The box has alot of data on it so I would rather not have to do a clean install.
When I download a torrent from zbigz.com. I receive the following message :
Network Error (tcp_error)
A communication error occurred: "Connection aborted". The Web Server may be down, too busy, or experiencing other problems preventing it from responding to requests. You may wish to try again at a later time.
I am using windows 8 convertible acer...my laptop shows that i m connected to the internet...the internet only works in Internet Explorer and Google Search app...the desktop versio of internet explorer shows the error "This Page Cannot Be Displayed" google chrome does not work neither does my itunes app...
View 2 Replies View Related