Had this problem after using advanced system care,it screwed up my whole pc.Did a reset and refresh through the window 8 ulilities but problem still persist.After resetting the pc,resetting tcp/ip stack success once but failed onwards after rebooting.Is this normal or something is wrong with pc?
View 9 RepliesI keep loosing the Internet, every few days, and I go to my adapter settings, disable, then enable, and it comes back on. My adapter ia an Asus PCE-N15 Wireless LAN PCI-E card. I have a Lenovo H415 desktop running Windows 7.
View 3 Replies View RelatedWindows 8.1 Pro with Media Center,
Windows 8.1
Comcast Gateway.
Pro Media can access 8.1 Network and Homegroup.
8.1 cannot access ant Pro Media. Network Error "Windows cannot access DesktopUsersPeteDocuments' (or any other folder)
Can access IP4 address.
Windows 8.1 new machine, came with 8, updated to 8.1 then 8.1 Update.
In my network 4 Desktop running windows XP all are connected LAN cable and my modem is tplink and 1 laptop running windows 8.1 pro accessing network through wireless in my laptop network place all the pcs are visible but I am not able to ping them and when I click I am getting message that Network path not found Error code 0x80070035
View 2 Replies View RelatedI have to PC's that belong to the same homegroup. When I go to explorer, there is a delay before the other PC shows up and yet another delay when I select to browse that PC. If I close and go back I'll often get this error code and then there are time when I get the code on the first try. These PCs are running Windows 8.1 Pro and powered on 100% of the time. I noticed this nonsense while on Windows 7 as well.
View 7 Replies View RelatedCould not reconnect all network drives error at boot? I get it most of the time with a wired Ethernet connection. I've done a lot of searching and tried different things but nothing seems to work. This started a few months ago, was not there initially with Windows 8, 8.1 or 8.1.1.
With XP, you could do this to fix it:
Control Panel
Folder Options
View
Uncheck "Automatically search for network folders and printers"
This is no longer an option in Windows 8 (I think it disappeared with Vista).
As the title says, I'm getting a box saying "An unexpected error has occurred" whenever I try and access the properties window for my ethernet adapter. An unexpected power outage earlier in the day rendered my Windows 8 installation half messed up, leaving most of my drivers corrupt, so I had to attempt a refresh today, which solved most of my problems.
Unfortunately others like this have been cropping up since the refresh. I've looked for other possible solutions to this problem, and none have worked so far. Re-registering DLL files solved nothing, a system file check didn't do anything, and making sure I was in the correct user groups didn't solve anything either.
Delay in being able to access a network share? Upon going to Network and clicking on the desired computer, I get a network error; it cannot find the destination machine.
After about 30 seconds of trying and trying again, it lets me in.I go into Network:
Then I try again after a minute or so:
All my shares have their security set to allow full access to EVERYONE and are shared through your usual share and specify permission. I don't bother with Home group as this 30 second access denied routine makes the home group unusable.
I have a few other computers on the network and they all do the same thing to every other computer.
I currently am running windows 8 pro on my main computer, two days ago I had left it on for an hour or so and when I came back to it I had no internet conection and the error message I get says there is something wrong with the drivers.
I tried for a while to fix it but had no look. The conection im using is wired and the symbol in the corner has a small yellow triangle over it and says no internet access.
After getting fed up of trying to fix it I plugged in my old computer which is running windows 7 and the conection worked fine all night.
I turned on my computer today and it was working fine still and then after leaving my computer alone for an hour or so I returned to find the internet symbol in the corner with the same yellow triangle over it saying no connection and troubleshooting said something about no ip address.
The only thing I think my main computer was doing when I wasnt on it was updating AVG then when I returned it had no connection. My windows 7 computer also uses AVG but not sure if AVG has anything to do with the problem
Ive tried uninstalling avg and making sure other firewalls are off and also reinstalling drivers but had no luck.
I am a home user trying to use a PPTP VPN connection from Portugal to the UK and this is a new laptop. Frustratingly the connection worked initially but I must have changed something while setting up all my stuff on here since then and I now get error 807 when trying to connect.
I can ping the VPN server but when I try to telnet to it via port 1723 it fails even though I have disconnected the Windows firewall and disabled AVG
My desktop PC is few years old and I have installed Win 8.1 for quite a long period of time. Since then I don't really have any problems, until I got my BSOD about DRIVER_OVERRAN_STACK_BUFFER today. I just booted up the PC normally, logged in to the desktop(not Start screen), and waited for a moment. Then I got this BSOD.
PS. I did not do any hardware driver updates recently.
I have a Synology DS213+ NAS which is running well. Since upgrading to Windows 8.x I now get an error every time I try to copy/move a file or folder from the NAS to a UAC protected directory, i.e. C:
The error is: "Location is not available. P: is unavailable. If the location is on this PC, make sure that the device or drive is connected..." it goes on.
Anyway, if I copy the file to the desktop first, or another non UAC folder, its fine.
I am aware of Windows 8.1 causing some other issues with the NAS so I have disabled SMB2 and Large MTU.
I have witnessed this exact same problem on someone else's 213+ and Windows 8.1 so I know I am not alone.
I upgraded to Windows 8.1 and this error started happening. As soon as it did, I jumped into the Googlemobile to try to figure it out. Here is a list of what I've tried:
Uninstalled/reinstalled drivers via Device ManagerUpdated driversChanged networking drivers to and from defaultChanged 'Speed & Duplex' to and from 100 Mbps Full DuplexSwapped to a wireless connectionUpgraded router firmwarePower cyclingDeleted and reset network connectionsChanged antivirus (Using, and have been using, Webroot)
I installed Windows 8 Pro a couple of weeks ago, and I've been getting A LOT of blue screens of death since then with different errors. Or sometimes my computer would just freeze, turn off and it wouldn't turn on without several tries (same thing happened when I had Windows 7 sometimes). I uploaded the .zip file with my information. What should I do?
Just got a couple of BSODs once again, first one was something like "Kernel mode exception not handled" and now I've got "Driver overran stack buffer".
I recently bought a new laptop (Lenovo T440s, Win 8.1 Pro w/ update 1, Intel 7260AC). I've tried connecting via wireless in multiple locations, and haven't had any problems except in one location, which is at my office's public access WiFi. I can get onto the network and get internet access on my win7 laptop, and on my Surface 2. With the new Lenovo it appears that I've connected to the wireless network, but have no internet connection. When I initially select the network I get connected, and can open a web page. But then it switches to a "limited" connection and I no longer have access.
Windows defender/firewall is on. No other security things that I know of (I deleted the Norton trial that came with it).
There is a screen that comes up when I log on with any device that asks you to accept that you will not download porn, steal the firstborn child, etc. I've bookmarked the page and been able to push the button to agree, but I still lose the connection shortly after that.
I don't have the internet connection anywhere on the computer (this isn't just a browser issue).
I've tried reinstalling the wireless driver. No luck. I have the most recent version (17), and I've also tried installing the Intel PROset/wireless software as noted in this thread (BT Public Wifi works on Windows 7 but not Windows
8.). But quite honestly I'm not totally sure what to try doing after that is installed. I ran the diagnosis tool, and got a failure on the ping test (No Response: default gateway, DHCP server).
This is reg uICE (Universal Infrared Control Engine). After installing in my Win 8 64-bit machine whileI try to launch it, I am getting the error-- The task monitor failed to start.reinstall uICE. Error: The service has not been started.
Reinstalling did not work. Nor did compatibility mode installation. Basically uICE declined to start in my Win 8 64 bit. Please note that this program worked fine on my previous 32 bit version of Win 8.
Is there a way to make it work on my PC? Alternatively you can suggest me some other programs like uICE to remote control multimedia applications like WMP, VLC player, Winamp etc?
am getting winsock error 10060 the connection timed out when using Wi-Fi connecting with just one of the sites. I pinged and it's fine too. When using wired connection it works fine.
View 3 Replies View RelatedFor the past month i have been getting disconnected from my favourite game guild wars 2, after researching the error code it has been linked back to the DNS error. i have restarted, factory reset the router, restarted windows, formatted windows, disabled and re-enabled the Ethernet Port on my computer but have had no success, sometimes restarting the router fixes the problem, and sometimes it doesn't.
I have changed the ipv4 connections to use the Google server addresses, but this did not fix the problem
I have also used the ipconfig/flushdns command which also does not work
The game client Steam will connect, but Team-speak 3 and other websites will not.
I bought an Asus G75vw couple days back with windows 8. Everything was working fine except that i couldn't connect to my wireless router. It had a WEP encryption. After I entered the Network Security key, I Kept on getting "Can't connect to this network", troubleshooting didn't work either. Then I updated all drivers from Asus support website and it connected after a restart. I was quite delighted but the next day again i got the "cant connect to this network" message. So I changed my encryption to WPA2-PSK (AES) and even updated the firmware of my router. Still no luck.
View 9 Replies View RelatedI am unable to install the drivers for my NIC's getting the error 'Invalid data as shown in the images below'.
It has previously been working fine on all adapters but I needed to uninstall the network cards as HyperV was throwing up an error when creating virtual switches which may have caused this?
PS C:UsersJGAdmin> get-netadapter
Name InterfaceDescription ifIndex Status MacAddress LinkSpeed
---- -------------------- ------- ------ ---------- ---------
Ethernet 40 Intel(R) PRO/1000 PT Dual Port Netwo... 117 Not Present 0 bps
Ethernet 39 Broadcom BCM5709C NetXtreme II Gig...#2 132 Not Present 0 bps
Ethernet 38 Intel(R) PRO/1000 PT Dual Port Net...#2 131 Not Present 0 bps
Ethernet 37 Broadcom BCM5709C NetXtreme II Gi...#50 130 00-26-55-1A-A8-4A 0 bps
Ethernet 34 Intel(R) PRO/1000 PT Dual Port Net...#3 127 00-1F-29-56-C2-51 0 bps
Ethernet 33 Intel(R) PRO/1000 PT Dual Port Net...#4 126 00-1F-29-56-C2-50 0 bps
vEthernet (VLAN3 (Desk... Hyper-V Virtual Ethernet Adapter #3 71 Not Present 00-1F-29-56-C2-51 0 bps
vEthernet (VLAN2 (Serv... Hyper-V Virtual Ethernet Adapter #2 64 Up E8-39-35-14-23-2C 10 Gbps
I have tried numerous drivers with no luck all getting the same error.
The box has alot of data on it so I would rather not have to do a clean install.
When I download a torrent from zbigz.com. I receive the following message :
Network Error (tcp_error)
A communication error occurred: "Connection aborted". The Web Server may be down, too busy, or experiencing other problems preventing it from responding to requests. You may wish to try again at a later time.
I'm using Windows 8.1 for couple days and I connect to the internet using a pppoe connection,at first dial ALWAYS GOT
THIS ERROR : "The modem or other connecting device has reported an error"
AT SECOND always works.
I am using windows 8 convertible acer...my laptop shows that i m connected to the internet...the internet only works in Internet Explorer and Google Search app...the desktop versio of internet explorer shows the error "This Page Cannot Be Displayed" google chrome does not work neither does my itunes app...
View 2 Replies View RelatedI have been trying to remote into my Windows 8.1 desktop from outside my home network using the RDC program for Apple.
The basic setup from within the home network works fine. I turned on the port forwarding and DNS stuff on my ASUS router and that worked fine from within my homework network. When I go outside my home network, it get to the certificate message and then throws a tsl1_alert_internal_error and dies.
For about a week now, my computer has had intermittent internet access. It'll work anywhere from about 10 seconds to 45 minutes or so before cutting out. When it disconnects, it usually corrects itself within the next minute or so, or disconnecting/reconnecting to the network, running the troubleshooter, or turning on/off wifi will correct the issue slightly quicker.
When running the troubleshooter, I've seen about every error it has. Usually "Default gateway is unavailable." Sometimes an IP error, sometimes "network cable is unplugged," sometimes it'll tell me I have a router or modem error, or to contact my ISP. It varies. I've seen up to 3 errors at once, and then the next time the Troubleshooter runs it'll give me another entirely. The network itself is fine. A number of other devices function consistently throughout the day as my PC has issues. This PC worked on this current network for about 3 weeks prior to failing.
Normally, it thinks it's connected. Sometimes it shows the yellow symbol in the bar and says no internet access. Usually depends on how long it cuts out for.
On an HP Touchscreen laptop
AMD A10-5745M APU processor
Windows 8.1, 64 bit
Qualcomm Atheros AR9485 802.11b/g/n WiFi Adapter
Security on the wireless network is WPA2-Personal with AES encryption
I've checked for viruses (none), refreshed the PC (not a full restore, but the one that does not remove files, just programs and settings), done a couple things in command prompt, and updated the driver.
In continuation to my previous thread on this subject, I now have another network printer problem in the same system. I chose to open it in a separate thread because the previous one became too long.I have 3 PCs on my home network
1. Windows XP (SP3) desktop with HP6500 E709a USB printer.
2. Windows 7 (Ultimate SP1 64 bit) desktop with HP 1018 USB printer.
3. Windows 8 (64 bit) laptop.
All computers can see each other and share folders on the home network.
Computers 1 & 2 can freely print on their own printers, as well as on each other's printer. Computer 3 (Windows 8) can print on the HP6500 (which is connected to the XP computer), but cannot print on the 1018 printer connected to the Win7 computer.
I know that on the Windows 8 laptop I have to define a local port for the network printer, but when I try to do it I get "Access denied" error message. Win7 denies access from Windows 8. This is strange, because Win7 does allow access to XP. On the WIN7 computer, under printer properties/security, print permission is granted to "Everyone".
So what could be the reason for the "Access denied" error? I guess it has to do with security / users / permissions, but I cannot find a solution.
I am having issues with my clients. Every time they logon, the information won't go through the PC client and load up. I get this problem in the image below.
View 2 Replies View Relatedan error message in Device Manager when installing the network attached storage drives like MyBook Live, the drives themselves seem to work fine and i have access to them (most of the time) on my home netwok, however i keep getting that little yellow triangle telling me that something is wrong, specifically:
the device manager error code is This device cannot start. (Code 10)
Every time I turn my laptop on, I lose my thumbnails and it has to reload them. I've tried today to go through a few refreshes/reinstalls, and I'll occasionally be able to keep them, but then I just start losing them again.
View 2 Replies View RelatedReset password on Surface Pro 2, they haven't used it for a month and could not remember last password they used. Built-in resetting option won't work because it will erase all user files they have on that tablet. I usually use Nordahl password recovery tool when i need to blank or change forgotten password, it worked fine for me on regular non-tablet Windows machines, both options - CD and USB boot.
I'm not familiar with Surface tablet, so i did online research on how to boot Surface from USB, tried all options, but was not able to boot it from USB stick (i used 3 different USB 2.0 sticks).
Here is what i tried: I was able to get into boot screen and disable Secure Boot Control, then able to get into Advanced Options screen, checked USB drive option. Tried 3 different USB sticks with 3 different password recovery software - no luck. Any experience with Surface Pro 2 password recovery? Either i'm doing something wrong, missing a step, or maybe older USB sticks don't agree with Surface USB 3.0 port? Should i try to plug in external DVD drive and attempt to boot from it?
I have a new laptop with and therefore learning Windows 8. my concern today is in the taskbar I have the touch keyboard always on my taskbar and the English keyboard settings. I go into taskbar properties, and I have tried every conceivable option I can think of to stop this unlock toolbar, apply , save, uncheck settings apply, save, lock toolbar apply, save. etc from my reg acct as well as from within admin acct. But still after every reboot, they appear back again.
View 6 Replies View Related