Network / Sharing :: Wireless Adapter Reduced Speeds?
May 24, 2014
Laptop - Acer Aspire V5-552G-X414
Router - Asus RT-N56U
Modem - Arris DG860
Wifi Adapter - Atheros AR5BWB222
ISP - Time Warner Cable, 20/2 Mbps
Devices Connected - 2 Iphones, 1 Kindle Fire, 1 PS4, 1 Desktop, 1 Laptop
No Error Messages
Problem: Laptop won't connect at full speed UNLESS I uninstall driver and reinstall. Then it will connect at 20Mbps until I close the lid or restart the computer (I think, not sure on when it slows back down). It slows down to what looks to be 3-4Mbps every single time. It shows no error message and no reason as to why it slows down that I can tell. Device manager shows no problems. Desktop is also ran on wireless through a different adapter and never loses speed, so I'm fairly certain its an adapter or windows problem with the laptop. I've tried original driver and updated to most recent driver and still does this. I've turned off automatic update of driver in Windows 8.1 also.
View 2 Replies
ADVERTISEMENT
Nov 13, 2013
After a while when i'm browsing the web etc, my wireless connection goes to Limited and there are no other wireless networks available (when there should be 10+ networks).
When i disconnect that limited connection, there are suddenly no networks found and my wireless adapter disables itself and i can't re-enable it anymore. The only thing to restart my computer.
This occures after a couple of minutes. I had this problem before, but then it fixed itself for a couple of weeks and now i have the same problem again.
I've tried reinstalling my drivers, but doesn't do the trick..
I have an Asus N76VM laptop running Windows 8.1 Pro 64 Bit with a Intel(R) Centrino(R) Wireless-N 2230 adapter.
View 9 Replies
View Related
Jun 20, 2014
I have a Lenovo Ideapad Y500 laptop running Windows 8.1. i7, 8BG ram, 2GB Nvidia card--all that stuff. It ran perfectly for nearly a year. But now, the local area network is broken. I haven't done anything different or changed anything that would affect it, as far as I know. But now that it's summer, I have lots of free time but I can not lan any games with people, which sucks. So I googled and googled, tried the netsh int ip reset resetlog.txt (or whatever it is), tried ipconfig resets and stuff, and none of that works. The wireless lan adapter Media State is still "Media disconnected."
I took this screenshot AFTER I did OneKey Recovery (which is a factory reset). It set my computer back to the original settings: Windows 8, full of bloatware, etc. I did this reset last night, updated it, updated it to Windows 8.1, updated Windows 8.1, and finally, before I went to bed, tested the LAN. It worked, I was able to connect to my Dad's Minecraft world. So I set my laptop to start re-downloading my games (reset deleted all my data), and when I opened it up this morning to play Minecraft with my family, the LAN was not working again. I couldn't connect (or even find) the lan games.
View 7 Replies
View Related
Oct 27, 2013
I have a Netgear WN111 wireless adapter on my PC. Since installing Windows 8.1 it doesn't connect automatically to the router. The PC says there are no connections available, so I can't even click on the router to try to connect. If I pull the adapter out and push it back into the USB port it connects automatically. Also, when I switch the PC off, the LED on the adapter continues to flash, so I have to pull it out and plug it in again to stop that. I've tried troubleshooting, compatibility check, reinstalling the driver and uninstalling the driver and getting Windows to install one itself.
View 9 Replies
View Related
Apr 28, 2013
I just got a computer that comes with Windows 8 and I'm trying to get on the internet with the wireless adapter I was using on the old computer but I keep getting an error message. I am able to install it from the disc but when I go to run the program it says "Can't load ProcNICs.dll" This is the adapter I am using (version 4). The most recent driver the website lists for this adapter is for Vista. Is there a way to get this to work?
View 9 Replies
View Related
Jul 7, 2014
This is a 6 month Old Gateway Laptop, Windows 8 preinstalled. Broadcom Network Adapter.
I have a Buffalo WZR-300GB Router (2.4mHz, with 802.1/ 11g/b/n) all working. There are 4 wired and 3 wireless computers on the network. Wife's Gateway (Windows 8) is the ONLY one with [wireless]dropped connections. No MOVE has been made with Her Laptop or the Router.
This is the troubleshooting I've have done so far.
Uninstalled/reinstalled network adapters.Reset the adapters. Scanned Hardware changes (before/after) in the Device ManagerTurned off Power Management.Disabled the Lan (wired) connection-adapter.Removed (Forget this Connection) 2 other wireless connections from outside the home.Wireless Adapters are set to "Maximum Performance" under (edit power plan).Moved to Laptop (actually the 1st thing I did) to 2 different locations with same results, dropped connection.Under settings the Topology is all Checked, Except 2 I have never seen before. Multi-Layer Protocol, and Kernel 64 something. Anyway, when I insert a check mark next to both. I'm Prompted "Do you really want to disable this connections?" I have done both (checked/unchecked) nothing changes.Under Device Manager: Restore all Hidden Adapters, About Five More adapter showed up I had never seen before. So then I Scanned for Hardware Changes. No effect!
View 1 Replies
View Related
Jun 14, 2014
I keep loosing the Internet, every few days, and I go to my adapter settings, disable, then enable, and it comes back on. My adapter ia an Asus PCE-N15 Wireless LAN PCI-E card. I have a Lenovo H415 desktop running Windows 7.
View 3 Replies
View Related
Sep 15, 2014
i got usb adapter WDL-U700 dual band 802.11n wireless USB adapter it doesnt seem detect 5ghz wifi
i already checked/change configuration to multimedia/gamig enviroment, channel mode etc
View 9 Replies
View Related
Oct 2, 2013
I upgraded to 8.1 and now my wireless connectivity is lost. I have installed the latest driver model for my device but still it is not working
View 9 Replies
View Related
Nov 19, 2013
Wireless adapter tripping out after upgrading Win 8 to windows 8.1? Computer used to work fine on Win 8. Now I cant download large files or watch TV or you Tube or live Football 30 feet away from the Router. Yet it worked good on Windows 8. Is it possible to return to Windows 8? I did not make a Restore USB at Windows 8 but did a Restore USB for Win 8.1.
View 4 Replies
View Related
Aug 14, 2013
I installed Windows 8.1 build 9471 into my desktop. I use a TP Link TL-WN781ND wireless adapter to access my home network and the internet. I tried copying the drivers from Windows/System32/Drivres and installing them manually, I also downloaded the exe from the site but they still wouldnt connect. It would just say no connections found.
View 7 Replies
View Related
Jun 8, 2014
I have three computers on my home network:
(a) desktop in the office with ASUS USB-N53 adapter
(b) new desktop in the office with fairly old Broadcom PCI 802.11g adapter
(c) media box hooked up to TV hard wired to router
I recently mapped a drive on system A so that it could be shared with system B (they are side by side). Unfortunately, upon trying to transfer files the speeds are terrible! I am only getting between 500kb/s and 1mb/s.Is this due to my relatively old wireless G adapter?
View 9 Replies
View Related
Jul 13, 2014
I just bought a new PC (Lenovo Ideapad Y510p, Windows 8.1 home edition), and noticed that my download speeds have dramatically decreased. On my previous HP laptop running Windows 7, I was getting DL speeds of ~50Mbps, but now it is down to ~15Mbps. No difference in the router/location of the computer, and it doesn't matter whether I'm using wifi or an ethernet cable. I've already tried manually updating drivers (Intel wireless-N 7260), flushing dns, changing wireless configuration settings, adding in a registry key to disable bandwidth reserving, and disabling my antivirus (symantec). I checked and there are no background processes taking up bandwidth, and I've uninstalled pretty much every app already.
View 1 Replies
View Related
Jul 31, 2014
I have a 600Kbits per sc connection, cable modem so my downloading speed is around 60-70 kbytes/s same in utorrent and in browser downloads, i use windows 8.1 pro, 64 bits, recently my google chrome was turning slow and firefox too, i dunno if my pc was infected by viruses. i scanned wit havast and bitdefender free versions and found nothing.and yesterday when i tried to download a pdf file, i dunno why nut download speed was horrible, started with 24 and then it was like 3-4 kbytes/s and it even failed later.
I thought it was a connection problem so i restarted my connection, browsing was fine everything except downloading seemed okay.
I tried doing the same things with different browsers like firefox or internet explorer but the problem was same.
When i tried utorrent, it was perfectly normal, it gave the usual download speed of 60-70 kbytes/s so it seems the problem was onl in downloading with browsers and no problem with browsing and utorrent. I hard resetted my pc and reinstalled fresh copy of win 8.1 but again twas the same.did it 3 times already but no change. I dunno if it is a virus or something but i am exhausted, ( before formatting my pc , i backed up my files in an external hdd so it may be possible that if there is a virus involved then it may have came back due to my external hdd)
I checked Speedtest.net by Ookla - The Global Broadband Speed Test and there too, showed 0.56 mbps , so it was normal there too
View 9 Replies
View Related
Mar 23, 2013
I have 50/5 at home and just looking for ways to get the best out of my internet"z". Last night, I ran a benchmark against my ISP's internet servers and then against Level 3 and a few others. My ISP's DNS servers are slower than frozen molasses compared to Level 3. So, I've since changed my DNS servers.
I run a Netgear 3800 router, with 2 Level 3 DNS servers set statically, and a 3rd set to Google's Public DNS (which is considerably slower - possibly due to distance/location). I have Cat 6a STP (I know, overkill) cables I purchased from Monoprice for pennies on the dollar. I know wireless will vary with signal strength, wireless interference, router/network load. I'm just looking for other ways to be a nerd and get the most out of what is available to me.
Aside from normal PC maintenance (Hard drive defragging, allowing caching for pictures/banners for faster loading), is there/are there any other things which I can do to ensure my wired/wireless internet connections are running top notch?
View 3 Replies
View Related
Jan 29, 2014
Updated my system from 8 Pro x64 to 8.1 pro x64 this past weekend. Ever since speeds from my computer to other computers on our home network (some Win 7, some Win 8) and especially to my two Synology Diskstations have dropped during file transfers from averaging 70/mbps running Win 8 to 22/mbps now running 8.1 .
Updated the NIC driver for the Realtek RTL8111E built-in to my mobo (ASRock Z77 Pro 4) to the latest Oct 2013 but no difference.
View 5 Replies
View Related
Jul 30, 2013
I recently upgraded to Windows 8, but since my download speeds have been very low. I pay for 2mb, but I'm getting about 100-500 kb/s when I download things on, say, Steam. I've done speed tsts from speedtest.net and it says I'm getting over 2mb/s download speeds, but I'm not seeing this in my actual downloads.
View 8 Replies
View Related
Sep 15, 2014
I recently put together a new 64-bit Windows 8 Build. Everything is running fine except my Ethernet connection.
I use the build in my office and my co-workers are consistently getting download speeds of 30+Mbps using speedtest.net. Unfortunately, my speeds were around 5Mbps.
I narrowed down the issue to a network driver conflict. After downloading and installing the latest drivers from Realtek, my internet speeds jumped to 30+Mbps on Speedtest. The only issue is everytime I reboot the computer, the same problem occurs. I have to fiddle around with device manager disabling/uninstalling the default drivers and/or reinstalling the Realtek drivers.
Windows keeps reverting back to the signed older driver causing the issue, instead of the newer unsigned version from Realtek.
[URL]
View 9 Replies
View Related
May 3, 2013
As the title says, I'm getting a box saying "An unexpected error has occurred" whenever I try and access the properties window for my ethernet adapter. An unexpected power outage earlier in the day rendered my Windows 8 installation half messed up, leaving most of my drivers corrupt, so I had to attempt a refresh today, which solved most of my problems.
Unfortunately others like this have been cropping up since the refresh. I've looked for other possible solutions to this problem, and none have worked so far. Re-registering DLL files solved nothing, a system file check didn't do anything, and making sure I was in the correct user groups didn't solve anything either.
View 3 Replies
View Related
May 18, 2013
Only just a few days ago did this problem begin. During any session, my wireless adapter will become totally unresponsive and then all of my media connections will become inactive and disconnected. I try to run an ipconfig and it just lists everything as disconnected.
I am thinking that this isn't a driver problem because the wireless internet works up until this happens. I use a d-link usb-wireless adapter but that shouldn't be the problem because even my ethernet becomes disconnected when this issue occurs.
View 1 Replies
View Related
Apr 7, 2014
Installed windows 8 on blank HD. Version was enterprise. Went through installation process, then discover that the wireless adaptor (laptop, built in) wasn't being recognized FULL stop by windows. I tried a few things. In the device manager, the wireless adaptor is not shown. However, after updating the device list, it shows one unknown device.
I looked through the preloaded drivers for wireless devices, but all of them were for USB ethernet/wireless adaptors, which as I recall from my previous installation of windows was not the type of driver that the device was using. I've also gone through the automates troubleshooting, etc, but nowhere is it even acknowledged that the device is even there. Now, my initial thinking is that it is indeed something to do with the drivers, but I'm not sure if I can find the needed ones. I'll upload more detailed information about my setup if it would be useful.
View 6 Replies
View Related
Feb 14, 2014
So, I woke up this morning and realized the the wifi adapter on my ThinkPad 430 is disabled. It's been working perfectly fine for a couple years, but as of this AM it didn't work. My smart phone can connect to the wifi access point just fine. What I can check to get it working again?
I have Windows 8.
View 4 Replies
View Related
Aug 19, 2014
I recently got a 2 slot card but seems to be 1 cm away from my wireless network adpater. When booting up, everything runs fine except I'm unable to connect to the internet. I'm wondering if the GPU is blocking the adapter. The GPU is running at 30 celcius
View 2 Replies
View Related
Aug 27, 2014
I tried everything I know but can't seem to get back my wifi card to work.
View 9 Replies
View Related
Sep 5, 2012
I have this usb 2 wireless adapter which worked fine on windows 7, ive just installed Windows 8 and have tried to install this WLAN adapter but its not working. It comes up in device manager as a usb 2.0 WLAN with drivers not installed but when I try and manually install them I just get The hash for the file is not present in the specified catalog file error
View 9 Replies
View Related
Jun 5, 2014
After updating my windows 8 computer and restarting it I found I was unable to connect via wireless internet. I'm currently connected with a Ethernet cable.
View 1 Replies
View Related
Oct 16, 2013
I upgraded to windows 8 and have had no problem when I booted up my compaq presario. I was not online went to the control panel to troubleshoot my internet connection and was told that my Ethernet doesn't have a valid IP configuration and that "Default gateway" is not available. I am hardwired into my AT&T router (the same router that is serving three other laptops in my home without any problems). I downloaded the v1.7.0.0 driver but I'm not sure if it installed as I am still having to manually reset my ethernet adaptor via the control panel each time I restart the computer.
View 1 Replies
View Related
Jan 17, 2014
I have a 60mb fibre broadband - on my old laptop (Win 8.1)with no external antenna, only what is built into the machine - I am getting over 62mb on several tests. My desktop - fourcore intel i5, 8mb ram on Windows 8 has no antenna either so I have an Alfa (AWUS036NH) with a 6db gain aerial attached, is struggling to reach 20mb. They are located side by side.
View 4 Replies
View Related
Jan 20, 2014
for a while I've been using netsh to add some IP addresses to the standard windows loopback adapter (interface idx=1) which worked fine until today when I ran windows update.
I have always used this command to assign my loopback adapter an extra IP:
netsh int ip add addr 1 address=111.111.111.111 mask=255.255.255.0 st=ac
(using an example IP address)
But since installing the updates, this returns the following error message:
Failed to configure the DHCP service. The interface may be disconnected.The system cannot find the file specified.
However, when I do "netsh int ip show int" it clearly shows the following interfaces:
Idx Met MTU State Name
--- ---------- ---------- ------------ ---------------------------
1 50 4294967295 connected Loopback Pseudo-Interface 1
3 25 1500 connected Wi-Fi
4 5 1500 disconnected Local Area Connection* 2
and it's not disconnected at all. The only fix I have found so far was reinstalling windows 8.1 and not installing any updates... I just installed the updates again and it stopped working.
View 2 Replies
View Related
Jan 6, 2014
I am using an ASUS K55N laptop, equipped with an AMD A8-4500M APU, 4GB single-channel RAM, and of course, Windows 8 standard x64.
Occasionally, anywhere from an hour to three days after a boot-up, the computer will hang while in sleep mode (screen will be off but indicator lights will remain on for about 5 minutes in sleep mode) and shut off. Upon restarting, I'll be greeted by a "Your PC ran into a problem and had to restart" Windows prompt. Of course, a minidump will also be produced. However, there is no BSOD anywhere to be found.
Upon looking into these dump files with WinDbg, all of them point toward my Atheros AR9485 wireless card's driver; either athw8x.sys or athrx.sys depending on the driver I was using at the time. I have tried several Atheros drivers, to no avail. I have tried using new drivers, old drivers, Windows 7 drivers, you name it. At this moment, I am using a Windows 7 driver. Yet, it has not solved the issue.
Verifier is disabled, although I believe my issue can be attributed to debugging. I have literally tried everything and it persists.
Attached are my SF diagnostics tool logs.
View 9 Replies
View Related
Feb 27, 2013
This morning I installed an optional update from Windows Update. It was Ralink Technology WLAN 802.11 wireless LAN card.
Since then, when I try to print to my wireless network printer, the network would disconnect then come back on after a while. The update shows up in Update History as successfully installed but not in the installed updates. System restore is of no support here. The network configuration page shows normal. The web does not appear to be affected. I made a new network connection for the printer but it did not work.
Is there a way to reverse this update or should I uninstall the 802.11 LAN card and let windows re-install anew.
The printer is a HP Officejet Pro 8600e
View 5 Replies
View Related
