Network / Sharing :: New Windows 8.1 PC - Getting Low DL And UL Speeds
Jul 13, 2014
I just bought a new PC (Lenovo Ideapad Y510p, Windows 8.1 home edition), and noticed that my download speeds have dramatically decreased. On my previous HP laptop running Windows 7, I was getting DL speeds of ~50Mbps, but now it is down to ~15Mbps. No difference in the router/location of the computer, and it doesn't matter whether I'm using wifi or an ethernet cable. I've already tried manually updating drivers (Intel wireless-N 7260), flushing dns, changing wireless configuration settings, adding in a registry key to disable bandwidth reserving, and disabling my antivirus (symantec). I checked and there are no background processes taking up bandwidth, and I've uninstalled pretty much every app already.
I recently upgraded to Windows 8, but since my download speeds have been very low. I pay for 2mb, but I'm getting about 100-500 kb/s when I download things on, say, Steam. I've done speed tsts from speedtest.net and it says I'm getting over 2mb/s download speeds, but I'm not seeing this in my actual downloads.
(a) desktop in the office with ASUS USB-N53 adapter
(b) new desktop in the office with fairly old Broadcom PCI 802.11g adapter
(c) media box hooked up to TV hard wired to router
I recently mapped a drive on system A so that it could be shared with system B (they are side by side). Unfortunately, upon trying to transfer files the speeds are terrible! I am only getting between 500kb/s and 1mb/s.Is this due to my relatively old wireless G adapter?
I have 50/5 at home and just looking for ways to get the best out of my internet"z". Last night, I ran a benchmark against my ISP's internet servers and then against Level 3 and a few others. My ISP's DNS servers are slower than frozen molasses compared to Level 3. So, I've since changed my DNS servers.
I run a Netgear 3800 router, with 2 Level 3 DNS servers set statically, and a 3rd set to Google's Public DNS (which is considerably slower - possibly due to distance/location). I have Cat 6a STP (I know, overkill) cables I purchased from Monoprice for pennies on the dollar. I know wireless will vary with signal strength, wireless interference, router/network load. I'm just looking for other ways to be a nerd and get the most out of what is available to me.
Aside from normal PC maintenance (Hard drive defragging, allowing caching for pictures/banners for faster loading), is there/are there any other things which I can do to ensure my wired/wireless internet connections are running top notch?
Updated my system from 8 Pro x64 to 8.1 pro x64 this past weekend. Ever since speeds from my computer to other computers on our home network (some Win 7, some Win 8) and especially to my two Synology Diskstations have dropped during file transfers from averaging 70/mbps running Win 8 to 22/mbps now running 8.1 .
Updated the NIC driver for the Realtek RTL8111E built-in to my mobo (ASRock Z77 Pro 4) to the latest Oct 2013 but no difference.
I recently put together a new 64-bit Windows 8 Build. Everything is running fine except my Ethernet connection.
I use the build in my office and my co-workers are consistently getting download speeds of 30+Mbps using speedtest.net. Unfortunately, my speeds were around 5Mbps.
I narrowed down the issue to a network driver conflict. After downloading and installing the latest drivers from Realtek, my internet speeds jumped to 30+Mbps on Speedtest. The only issue is everytime I reboot the computer, the same problem occurs. I have to fiddle around with device manager disabling/uninstalling the default drivers and/or reinstalling the Realtek drivers.
Windows keeps reverting back to the signed older driver causing the issue, instead of the newer unsigned version from Realtek.
Problem: Laptop won't connect at full speed UNLESS I uninstall driver and reinstall. Then it will connect at 20Mbps until I close the lid or restart the computer (I think, not sure on when it slows back down). It slows down to what looks to be 3-4Mbps every single time. It shows no error message and no reason as to why it slows down that I can tell. Device manager shows no problems. Desktop is also ran on wireless through a different adapter and never loses speed, so I'm fairly certain its an adapter or windows problem with the laptop. I've tried original driver and updated to most recent driver and still does this. I've turned off automatic update of driver in Windows 8.1 also.
I have a 60mb fibre broadband - on my old laptop (Win 8.1)with no external antenna, only what is built into the machine - I am getting over 62mb on several tests. My desktop - fourcore intel i5, 8mb ram on Windows 8 has no antenna either so I have an Alfa (AWUS036NH) with a 6db gain aerial attached, is struggling to reach 20mb. They are located side by side.
I've been having some major problems with Windows 8.1 (and 8.1 Update) which never occurred to me in Windows 8.
What essentially happens is that the computer completely freezes up and I know that the disk usage goes to 100% as does the active time but the read speed/write speed and average response time are all 0. During this period, i cannot do anything with the machine, not even take a screenshot (And hence to poor quality of the attached picture which shows the scenario).
I've encountered this problem in all of the situations: Upgrade from Windows 8 to 8.1 via StoreUpgrade from Windows 8 to 8.1 via flash driveClean install of Windows 8.1 on to a formatted partition
I've never had this problem with Windows 7 nor with Windows 8 and I've gone through the process of trying to upgrade to Windows 8.1 more than 8 times (literally) on my laptop. I've updated the drivers from the vendor site.
I also encountered this same problem on my desktop once when I performed a clean install on it but I need a stable configuration on my desktop for now for work.
The following are the steps that I've seen online as solutions to this problem and have tried all of them to no avail:
Disable superfetch and windows search servicesDisable Link State Power Management for PCI expressDisable live tilesDisable page files
The configurations for the laptop are as follows:
HP Pavilion dv6-7040tx 3rd generation Intel Core i7 3610QM8 GB of RAM750 GB SATA harddisk (Currently has three partitions plus the small partition created by windows. This problem existed even when I had a single partition. The reason I re-partitioned was ease of formatting and re-installing the OS alone without clearing my data)NVIDIA GEFORCE GT 630M 2GB graphics card.
I do have all the latest drivers from the HP website and the latest updates from windows update. Also, if I check the resource monitor, at these times, the actual disk usage is indeed at very low rates for the different processes. I've attached a snapshot of that as well (had to use a camera then too). Notice the long gap during with the disk active (blue line) is 100% but the speeds (green area) are 0.
I am having issues with download and upload speeds on my computer. I have narrowed it down to my computer as every other computer on the network has 26Mbps DL and 2.5 UL speeds where as my computer is limited to a 16Mbps DL and 0.4 Mbps UL. I originally thought it was my Wifi card but when I did a direct connection using a Ethernet cord from my motherboard ether port to modem the speeds did not improve at all.
My Computer:
Windows 8 Pro (tried 10 times to get it to upgrade to 8.1 and that fails as well and reverts back to 8)
Intel i-7 3770k
32GB of RAM
Motherboard:
ASRock Z77 Extreme4 LGA 1155 Intel Z77 HDMI SATA 6Gb/s USB 3.0 ATX Intel Motherboard
My gpu is not downclocking while on the desktop. It's pegged at a base clock of 1,110 Mhz, drawing load voltage and this idling about 10 C higher than before in Windows 7. A reboot usually fixes it.
I dont know what in Windows 8 is causing it. I have nvidia control panel set to Adaptive power management, what else is there that would effect this? I can't think of anything else, I must be missing something.
Is there a way to setup network profiles or something so that when I bring my Surface Pro to work and connect to the wireless network there it will use the static ip address I have but when I disconnect and then connect to my home wifi it will go back to DHCP? On my MacBook Pro I can go into the network settings and change the location profile I have setup for networks but I don't see anything like this for Windows 8.
I am trying to share a specific folder on my Windows 8 computer with my Windows 7 computer. They are both on the same network connected to the same router. The Windows 8 computer is connected through ethernet, while the Windows 7 computer is connected wirelessly.
Here are my settings on my Windows 8 Computer:
This is the error I get on my Windows 7 computer:
What's up with this? On a related note, is it possible to share this folder with a specific PC, rather than "Everyone" on the network?
I am having trouble with ICS on win 8. On my old laptop (win xp) I used to be able to share my 3Connect dongle internet to connect to Xbox live. I recently got a new laptop with win 8 and whenever I share this internet connection I can never connect on my Xbox (the network to internet part fails). When everything is connected up and shared the Ethernet says 'Unidentified Network' which i believe is the cause of the problem. I've read i may require a driver update but i cannot seem to find one.
My Laptop: Toshiba Satellite C855-29N
what to do, maybe i am not setting up the connection sharing properly?
I've been trying to set up an old Savin 9033 printer through the company's router, but I couldn't find the network it's set up on from any other computer.
So I pull up Network & Sharing, see that Network Discovery is turned off.
I check it, go to click on "Save Changes" and nothing happens. I click it a few times and it kicks me back to the previous page, nothing saved. No password prompt or anything.
I double checked that all the appropriate services are running (DNS Client, SSDP Discovery, UPnP Device Host, Function Discoveryr Resource Publication, etc.) and made sure Network Discovery was allowed through Windows Firewall.
This morning I installed an optional update from Windows Update. It was Ralink Technology WLAN 802.11 wireless LAN card.
Since then, when I try to print to my wireless network printer, the network would disconnect then come back on after a while. The update shows up in Update History as successfully installed but not in the installed updates. System restore is of no support here. The network configuration page shows normal. The web does not appear to be affected. I made a new network connection for the printer but it did not work.
Is there a way to reverse this update or should I uninstall the 802.11 LAN card and let windows re-install anew.
I am trying to get file sharing to work with my win 8 machine and my OS X Server. The computers are on the same network with the same workgroup but I can't seem to connect. I was able to connect with the wife's win 7 home machine until I upgraded it to win 7 Ultimate now it wont connect either.
Okay, so in Windows 7 I am able to connect my wireless to my phone, and run an ethernet cable over to my Xbox. If I use the ICS feature and configure it under services to allow ports 88 and 53 UDP, it works fine. This also allows my Xbox to seemingly add to this list of ports as it finds necessary.
The issue is however, with Windows 8, although I can connect to Xbox Live the same way, it does not seemingly allow the Xbox to add more ports that it deems necessary. This leads to that NAT error message that I am actually trying to do this as a way to bypass it.
In Windows 7 this only works if the connection is set to Home (not sure about Work), but not public. I'm curious if the reason this does not work in Windows 8 is that Windows 8 does not have a Home option, but rather only Private or Public settings. There is some small setting buried deep somewhere that I just need to change to treat it like Windows 7 allows Xbox to treat home networks and configure/add ports automatically.
I would like to make a folder share from a tablet with windows 8 with password protected to a laptop of windows 7 and another of vista. I have followed the tutorial of File Sharing - "Share with" & "Stop Sharing" in Windows 8. My PCs have been set in the same workgroup and same user account, network discovery and file and printer sharing turned on. At the first time, it is OK for windows 7. However after some changes of account (delete and create them on both windows 8 and windows 7), it doesn't work anymore with the error from windows 7 "Login failure: user has not been granted the requested logon type at this computer" whenever password protected turned on in windows 8 and only OK when password turned off.
I just bought a Lenovo Y500 a couple of days ago and it came with a pre-installed Windows 8 everything seems working fine but when it comes to Wifi it randomly disconnects a lot , sometimes shows limited access and most of the time the signal strength bars keep going up and down.
I re-installed Windows 8 yesterday evening (thought it would be quicker than to cleanup and fix my old install) and then directly upgraded it to Windows 8.1. The problem I am experiencing is quite weird: The Operating System doesn't detect the network cable.
With that being said, do not jump straight to the "Did you turn it on and off again" questions. Here is what I have done so far:
Hardware-Side: Cross-check the cable with another computer --> Working fineCross-check the wall plug with another computer --> Working fineTest the connection with the BIOS's connection diagnostic utility --> Link detected
Software-Side: Checking if Windows was up to date --> Nothing to updateUpdating the motherboard's BIOS --> Not betterUpdating the LAN's drivers with the ones I found on the manufacturer's website --> Not better
I am wondering what is wrong with my installation. It was working A1 a few days ago, except for the issues I re-installed the operating system for.
In my network 4 Desktop running windows XP all are connected LAN cable and my modem is tplink and 1 laptop running windows 8.1 pro accessing network through wireless in my laptop network place all the pcs are visible but I am not able to ping them and when I click I am getting message that Network path not found Error code 0x80070035
My 8.1 laptop shows multiple network connections to my Samsung Smart TV --- One as "media connections" and 3 as "other connections". Both devices are on a simple wireless network using Linksys WRT54GS.
Under the "Network" page, most of the "Properties" of the TV connections are the same except for "Serial Number" and "Unique Identifier". Did I do something wrong when setting things up? Are these extra connections harmful? Should I delete some? How?
I purchased a new Windows 8, Inspiron 15 7000 series - 7537 last December. I had been using a router at a hotel for the time, and it worked correctly. When I arrived home, I had a Belkin router, and i experienced network issues in that i could not connect to the wifi. I could connect with Ethernet cable. The problem was fixed through customer support eventually, but I now have a new Comcast router, and i'm experiencing what appears to be the same or a similar issue. I can access the internet fine by wire. With wifi, it says i have access to the internet over the internet icon in the bottom right, but i cannot access webpages. I can use skype, and communicate through it.
Here is the result from the ipconfig /all :
Microsoft Windows [Version 6.2.9200] (c) 2012 Microsoft Corporation. All rights reserved.
C:Windowssystem32>ipconfig /all Windows IP Configuration
[Code] .....
I really need the wifi on this router working for this laptop. Let me note that it works on other laptops, so it should be an issue with hardware or settings on this laptop.
With the following problem regarding media streaming in windows 8. Up until recently I could stream video films from my HP laptop & HP desktop onto the TV via DNLA.
After following several posts on various sites it seems that when I try to start the windows media player network in the services I get the error message "windows could not start the windows media player network sharing service on the local computer.
Error 1068. The dependency group failed to start."
In the dependencies tab in the lower box of the two "the following system components depend on this service"
The box is greyed out and the words no dependencies is displayed.
I have two wifi APs in the home and only one has an Internet connection. the other is to access the wired LAN.
Last week I updated from Windows 8 to Windows 8.1 and thought everything was going well until I started getting wired LAN dropouts.
I have traced it back to 8.1 handling connection to wifi APs. In Windows 8, I was able to have "Connect automatically" for BOTH wifi adapters on this laptop. Now when I try to connect to the non-Internet AP, Windows 8.1 announces (correctly) "Limited access" and that's what Windows 8 did too. BUT, Windows 8.1 waits a few seconds then drops the connection with a useless message, "how me solve connection problems," where there is NO problem. A limited connection for the AP to the wired LAN is OK as it was in 8.
So now I am stuck with no home LAN access unless I drop the Internet AP and connect to the LAN AP.
Also, in the great wisdom of 8.1, because it is only a "limited" connection, it does not remember the Passphrase so I have to type it in every time. So much for progress.
What to do to get past this behavior and have a "limited" connection as OK as it is with Windows 8?
I upgraded to Windows 8.1 from Windows 8 and I can no longer see the files inside the folders on my networked drive. Before I upgraded I could see them, after the upgrade - not so much. The folders are fine, I can see them, just no files visible. There's no network issues as the files are visible from my Win7 machines and my wife's Windows 8 machine. All the standard default sharing and viewing settings are correct. Even if I put the direct path in File Explorer is tells me there's nothing there. I'm absolutely baffled. I have never seen this particular type of sharing issue before. I'm a pretty savvy Network Admin so the basic troubleshooting (and standard sharing settings) has been covered.
When I click network while i am in windows explorer, the network infrastructure is not there, only the Computer is visible there and i want to fix something by changing the properties of my modem/router on the network infrastructure.
without the likes of logmein?If I enable remote login on my pc, what needs to be done in my router (if anything) so I can remote in from wherever I want? I am running Windows 8.1 pro X64 router is netgear R6300