Network / Sharing :: Slow Transfer Speeds Over Home Network?
Jun 8, 2014
I have three computers on my home network:
(a) desktop in the office with ASUS USB-N53 adapter
(b) new desktop in the office with fairly old Broadcom PCI 802.11g adapter
(c) media box hooked up to TV hard wired to router
I recently mapped a drive on system A so that it could be shared with system B (they are side by side). Unfortunately, upon trying to transfer files the speeds are terrible! I am only getting between 500kb/s and 1mb/s.Is this due to my relatively old wireless G adapter?
Updated my system from 8 Pro x64 to 8.1 pro x64 this past weekend. Ever since speeds from my computer to other computers on our home network (some Win 7, some Win 8) and especially to my two Synology Diskstations have dropped during file transfers from averaging 70/mbps running Win 8 to 22/mbps now running 8.1 .
Updated the NIC driver for the Realtek RTL8111E built-in to my mobo (ASRock Z77 Pro 4) to the latest Oct 2013 but no difference.
I recently upgraded to Windows 8, but since my download speeds have been very low. I pay for 2mb, but I'm getting about 100-500 kb/s when I download things on, say, Steam. I've done speed tsts from speedtest.net and it says I'm getting over 2mb/s download speeds, but I'm not seeing this in my actual downloads.
I recently put together a new 64-bit Windows 8 Build. Everything is running fine except my Ethernet connection.
I use the build in my office and my co-workers are consistently getting download speeds of 30+Mbps using speedtest.net. Unfortunately, my speeds were around 5Mbps.
I narrowed down the issue to a network driver conflict. After downloading and installing the latest drivers from Realtek, my internet speeds jumped to 30+Mbps on Speedtest. The only issue is everytime I reboot the computer, the same problem occurs. I have to fiddle around with device manager disabling/uninstalling the default drivers and/or reinstalling the Realtek drivers.
Windows keeps reverting back to the signed older driver causing the issue, instead of the newer unsigned version from Realtek.
I just bought a new PC (Lenovo Ideapad Y510p, Windows 8.1 home edition), and noticed that my download speeds have dramatically decreased. On my previous HP laptop running Windows 7, I was getting DL speeds of ~50Mbps, but now it is down to ~15Mbps. No difference in the router/location of the computer, and it doesn't matter whether I'm using wifi or an ethernet cable. I've already tried manually updating drivers (Intel wireless-N 7260), flushing dns, changing wireless configuration settings, adding in a registry key to disable bandwidth reserving, and disabling my antivirus (symantec). I checked and there are no background processes taking up bandwidth, and I've uninstalled pretty much every app already.
I have a lenovo G505 laptop - it will no longer connect to my BT home hub despite it showing as being available. I suspect it might be to do with the fact that it is has a passkey - I entered it yesterday when prompted and it connected fine, but now I'm not being given the option of entering the key.
I've also tried connected using the BT wifi (as opposed to homehub) but once again it will not connect me. I've been through all the troubleshooting options, and searched under every term I can think of, but nothing is working.
without the likes of logmein?If I enable remote login on my pc, what needs to be done in my router (if anything) so I can remote in from wherever I want? I am running Windows 8.1 pro X64 router is netgear R6300
I have 2 machines connected via my router/hub (wired). One is running Windows 8.1 and the other Windows 7. Previously I had them sharing perfectly until I did a reinstall of Windows 8 (upgraded to Windows 8.1). I get this message on both machines whilst trying to access shared drives (permissions enabled to read, write, modify for all users):
I have a local account on the windows 8.1 as per previous installation. I have checked all the usual sharing settings and they are the same as in the previous working installation on both machines. I have left the homegroup and created a new one on the windows 8 machine and rejoined on the windows 7 machine all to no avail.
Simply for the home desktop and want to share with other kit on the home network.
When I boot up it appears I have to always tweak the settings :
1) Control Panel > System > Change settings > Network ID and select under "Select the option that best describes your network" so I opt for I tick "this is a home computer; it's not part of a business network." 2 )The reboot.
All works fine and all devices can be seen and read/write in accordance with the appropriate share settings.
Now the issue is when I next reboot the
Control Panel > System > Change settings > Network ID and select under "Select the option that best describes your network" will default to "This computer is part of a business network; I use it to connect to other computers at work".
So I have to got through steps 1 and 2 again.
How to I get Windows 8.1 Pro x64 to default to the "this is a home computer; it's not part of a business network." on each boot without having to manual configure.
My laptop is few months old HP Pavilion g6 OS: Windows 8 uses a ralink rt5390r 802.11bgn wifi adapter.
The wifi was working just fine suddenly it stopped. It detects my home network but every time it tries to connect ends up "unable to connect to this network". It connects to my friends wifi but not mine. And it connects with cable.
There is a red cross on the wifi network but it's green not GREY. It is not a modem problem because the other PC connects just fine. When I'm on wifi, cmd ipconfig gives me disconnected media for all the network cards on the laptop. Command netsh shows failure and access denied.
What I have tried to do for the past week :
I upgraded the adapter/ driver. My windows is fully updated. I re-installed the network card. I tried a USB wifi. I uninstalled the private server. I uninstalled my Norton because I thought it was blocking the connection I also deactivated the windows fire wall. I changed the SSID and PSW ... nothing worked. and of course I tried restarting, resetting, rebooting, deactivating and activating, disabling and enabling every single thing but nothing works.
I have 50/5 at home and just looking for ways to get the best out of my internet"z". Last night, I ran a benchmark against my ISP's internet servers and then against Level 3 and a few others. My ISP's DNS servers are slower than frozen molasses compared to Level 3. So, I've since changed my DNS servers.
I run a Netgear 3800 router, with 2 Level 3 DNS servers set statically, and a 3rd set to Google's Public DNS (which is considerably slower - possibly due to distance/location). I have Cat 6a STP (I know, overkill) cables I purchased from Monoprice for pennies on the dollar. I know wireless will vary with signal strength, wireless interference, router/network load. I'm just looking for other ways to be a nerd and get the most out of what is available to me.
Aside from normal PC maintenance (Hard drive defragging, allowing caching for pictures/banners for faster loading), is there/are there any other things which I can do to ensure my wired/wireless internet connections are running top notch?
Something about 8 is diff than 7 with regard to setting up Network, and Type of network. This seems to default any new network connection to "Private", whatever that means. In order to share in a Homegroup I need the network type to be "Home".
I have a very fast internet connection and video plays fine on all media players on my machine with local video files and internet video but when I try to play video files from a storage drive on a shared Windows 7 machine on my home network the video will play fine for a few minutes then buffer some, then play choppy. It is very intermittent. Also when I open the Homegroup and click on a shared computer (I have several on my Home Network) it will give me an error message saying that the share is not available or cannot be found but if I wait approximately 30-45 seconds and try it again it will usually open the share. I have seen a lot of posts concerning Networking issues in Win 8, is there no fix because from all I have read it seems to be hit and miss. I really would like to get this issue resolved as this throws a monkey wrench in my plans for a HTPC.
Is there a way to hide devices connected to LAN port 4 on a modem-router from devices connected to the other 3 ports? And also in the other direction: hide all devices on ports 1 2 3 from anything attached to port 4 ?
Instead of specifying by LAN port, the white list of things to see each other could be selected by MAC address, as I only have three things I want to see and be seen on my home network. A black list system is no good because unknown new things might get connected to LAN port 4.
I have an unusual networking situation... I disabled wireless in my modem-router, so only the 4 ethernet ports work.
I have a desktop (Win 7) a laptop (Win 8.1) and a NAS connected to the router's ports 1 and 2 and 3. They are networked by a password protected homegroup.
I share my internet service with a friend in the next apartment, by one ethernet cable attached to port 4 on my modem-router. Now her friends are staying there while she is away for a few months. They are not easy to negotiate with and I can't ask them to make any changes to their computers.
It seems they have added some kind of switch or hub at their end of that one cable, because I often see two or more strange PCs listed in Windows Explorer networks folder. It even lists the 3 usernames on their PCs.
I shouldn't simply disconnect their ethernet cable, or they won't have internet access, but I don't like how their PCs show up in Windows Explorer. Also I guess my three devices are shown on their computers (but probably none of my folders are actually readable by them)
It seems "network discovery" is not selective about what devices it finds. It is simply on or off, and it must stay on for my homegroup network to work.
Should I try a different kind of networking in Windows, instead of a homegroup?
Problem: Laptop won't connect at full speed UNLESS I uninstall driver and reinstall. Then it will connect at 20Mbps until I close the lid or restart the computer (I think, not sure on when it slows back down). It slows down to what looks to be 3-4Mbps every single time. It shows no error message and no reason as to why it slows down that I can tell. Device manager shows no problems. Desktop is also ran on wireless through a different adapter and never loses speed, so I'm fairly certain its an adapter or windows problem with the laptop. I've tried original driver and updated to most recent driver and still does this. I've turned off automatic update of driver in Windows 8.1 also.
I am trying to share a specific folder on my Windows 8 computer with my Windows 7 computer. They are both on the same network connected to the same router. The Windows 8 computer is connected through ethernet, while the Windows 7 computer is connected wirelessly.
Here are my settings on my Windows 8 Computer:
This is the error I get on my Windows 7 computer:
What's up with this? On a related note, is it possible to share this folder with a specific PC, rather than "Everyone" on the network?
I have suddenly had a strange problem occur. Everytime I restart my Windows 8.1 desktop my internet connection speed drops from it's normal 50Meg to around 3Meg when running any speedtest programme. The only way to cure this is to uninstall & re-install my network adapters through device manager. All is ok then until my next reboot & then it all happens again. It is the same on both the Ethernet connection & the wireless adapter. I have tried re-installing drivers etc to no avail. Something strange about my network setup. I have also ran various virus scans but nothing showed up. This suddenly started last Saturday & I cannot see what could of caused it, haven't installed any new programmes or anything.
All my other devices are ok including a Windows 8.1 laptop.
I have a 60mb fibre broadband - on my old laptop (Win 8.1)with no external antenna, only what is built into the machine - I am getting over 62mb on several tests. My desktop - fourcore intel i5, 8mb ram on Windows 8 has no antenna either so I have an Alfa (AWUS036NH) with a 6db gain aerial attached, is struggling to reach 20mb. They are located side by side.
I have recently up-graded my laptop from 8 to 8.1. Since that time, the laptop will not automatically connect to my home wifi. If I try to connect manually, it will say "unable to connect to network" and that's it, no more clues! The only way I can connect is by selecting 'restart' and then it will re-boot and connect automatically. If I 'shut-down' after use (or hibernate) it will not re-connect until I have selected 're-start' which is time consuming and annoying!
Using Windows 8 and XP on Home Networks and, unfortunately,I personally believe this is NOT POSSIBLE.
I should add however that my network, 1 Windows 8, 3 XP, 1 Laptop with Windows 7, 1 laptop with Linux, all did work until recently, so I think it is one of the Windows 8 updates have screwed up the system.
At about the same time I also started receiving notifications from Microsoft that XP would no longer be supported after April, so maybe there is something intentional here.
my computer is Dell inspiron 15 win 8 x64 I have problem with my home wifi network; I cant connect ''the settings saved on this computer for the network do not match the requirements of the network'' but when I try other wireless its work
I'm looking for a skype like tool to use over my home LAN. Your definition of a LAN may be different than mine.. what I'm calling a LAN is my home network which is simply two different computers plugged into my AT&T modem/router. (one plugged in by hardwire and one on wireless)
My thinking is this.. I need to chat and video with family at home no one else but i don't want the chat audio and video going out over the internet then coming back to my house before we receive the data.. that takes too long and there are delays due to low bandwidth. I'm seeking to avoid this by keeping all the data from leaving my house and going out to the internet.
I have looked at SIP tools like Linphone but when i signed up and set it up, nowhere does it ask me for any LAN information.. It never asks me for or tries to detect any LAN settings - it looks like it's going out over the internet to some SIP servers someplace.. thats simply not going to work.
When I go to advanced system settings and choose Home instead of business, when I save and restart it is still on Business network. I have windows 8 pro 64 bit on a HP pavilion elite 8 gb ram i6 1tb drive. I have made sure that the services below are running as well as set to Auto.
o Computer Browser o DHCP Client o DNS Client o Network Connections o Network Location Awareness o Remote Procedure Call (RPC) o Server o TCP/IP Netbios helper o Workstation
Also, I have recently "refreshed" my computer which I thought had fixed it. It actually fixed the "turn file sharing" not saving issue I was having, now this.
My wifi only works correctly at home. When at home, I have no problem and a good, solid internet connection. When I am anywhere else (friend's house, school, work, even my phone personal hotspot), I can connect to the internet with no problem, and it even shows as "internet" on the wifi screen so I know it is getting it. However, when I attempt to load a webpage it shows as if there is no internet. I have tried Chrome, Firefox, and Internet Explorer. I have done the ipconfig renew and release, when I do release it says "media disconnected". I have also tried forgetting the network and reconnecting.
Unfortunately I don't have access to the internet in these locations to troubleshoot.
I want basicly to home host a VPN, and that is what i do at the moment. So i tried with my friend after i did finish the setup (i did setup the VPN in the Windows Networks interface, over "Incomming Connections"), and i did portforward 1723, and the worst is, that when my friend connects upto the VPN from his PC at his home (not Local), to my IP, then it says on my PC he is connected.
But here comes the problems, at his PC, the Network Icon turns into a yellow warning icon, and when he clicks troubleshoot, it says "DNS Server does not respond", but at my PC here, it even says he is connected to the VPN, but also says no connection over IPv4, and the same on his side.
What can we do to get a connections from my PC to his PC, over the VPN, so he can access the Internet over my Internet instead, like lets say he has a blockade on for example www.facebook.com at home (which he of course doesn't has, it is just an example), and he connects to my VPN, as he accesses my Internet instead, he can open www.facebook.com, instead of having it blocked (one of the main purposes for a VPN, and the data encryption of course).
Here some screenshots:
My PC (Language = German): My Friends PC (Language = Norwegian):
And as you can see on my PC, it says he is connected, and as you can see on his PC, it also says he is connected, but he cant access the Internet, or anything else related to the web. Now prepare for the funny part: We were on Skype, and as he connected to the VPN, and "lost" the Internett Access, we were still talking (i guess that's because Skype still runs over the home network, while the rest tries to access internet over the VPN connection .