my computer is Dell inspiron 15 win 8 x64 I have problem with my home wifi network; I cant connect ''the settings saved on this computer for the network do not match the requirements of the network'' but when I try other wireless its work
View 2 Replies
I have a lenovo G505 laptop - it will no longer connect to my BT home hub despite it showing as being available. I suspect it might be to do with the fact that it is has a passkey - I entered it yesterday when prompted and it connected fine, but now I'm not being given the option of entering the key.
I've also tried connected using the BT wifi (as opposed to homehub) but once again it will not connect me. I've been through all the troubleshooting options, and searched under every term I can think of, but nothing is working.
I have recently up-graded my laptop from 8 to 8.1. Since that time, the laptop will not automatically connect to my home wifi. If I try to connect manually, it will say "unable to connect to network" and that's it, no more clues! The only way I can connect is by selecting 'restart' and then it will re-boot and connect automatically. If I 'shut-down' after use (or hibernate) it will not re-connect until I have selected 're-start' which is time consuming and annoying!
View 2 Replies View RelatedAll my windows 7 wireless laptops connect to nps and get authenticated. Windows 8 on the same hardware cannot to wireless. Tried to load the certificate locally but still cannot connect.
View 8 Replies View RelatedJust setup a N router, works OK with Laptop with Win 8, but unable to connect with Win 8 Desktop. Have entered router keys OK but nothing pops up to click to connect. Been into (Settings) then (Change PC Settings), but no Wireless tab in setting. Type in wireless, PC checks (No wireless). I have Win 8 Disk, can I load wireless driver from Disk if yes how.
View 3 Replies View RelatedThis is a random issue, sometimes I can connect just fine, and usually a restart of my laptop lets me connect.
However sometimes when I try to enter the password it does not work. I get the error message 'the network security key is not correct. Please try again.'
I know for a fact that my password is correct, and sometimes it works, allowing me to choose whether I want to 'find PC's, devices and content on this network' etc.
Regardless of whether I click yes or no at this point I don't connect. And instead I am getting to this screen below. What to enter as my username and password. As nothing to do with my wireless network has this requirement.
Trying to find the checkbox to connect automatically to my wireless network - it doesn't seem to be in network properties etc.
View 2 Replies View RelatedI bought an Asus G75vw couple days back with windows 8. Everything was working fine except that i couldn't connect to my wireless router. It had a WEP encryption. After I entered the Network Security key, I Kept on getting "Can't connect to this network", troubleshooting didn't work either. Then I updated all drivers from Asus support website and it connected after a restart. I was quite delighted but the next day again i got the "cant connect to this network" message. So I changed my encryption to WPA2-PSK (AES) and even updated the firmware of my router. Still no luck.
View 9 Replies View RelatedI have been unable to connect two windows 8 laptops (dell and asus) to my home network (and internet). At the same time I have connected 2 xp laptops and 3 kindles with no problems. My security consists of using mac addresses only and all other security is turned off.
The offending laptops will also only show the 5gz and not the 2.4gz in available networks (one laptop is brand new and the other is about 1.5 years old). I have also disabled all security on one of the laptops to see if that was the problem (it was not). When trying to connect I have two basic reactions. The first is that its taking too long (cannot connect) and the other is that there is limited connectivity. In addition to that I am sometimes told that the ip address is not right (malformed, I think).
I got the mac addresses, of the offending laptops, by the standard cmd/ipconfig /all path and choose the wireless wi ip but have also tried the other wireless as well with no better results (just making sure)
I also have an edimax extender plugged in and it works. The laptops also show fewer network connections than my asus 1000ha w/d-link dongle. My own laptop, incidentally, is clicked into the 5gz network connection directly from the router (edimax kinda redundant <g>)
I posted this in windows 8 topics as I think this is probably a windows 8 problem given the ability to connect other machines with no problem.
The router is a netgear wndr3400 and is working just fine for all but the windows 8 machine.
I installed Windows 8.1 build 9471 into my desktop. I use a TP Link TL-WN781ND wireless adapter to access my home network and the internet. I tried copying the drivers from Windows/System32/Drivres and installing them manually, I also downloaded the exe from the site but they still wouldnt connect. It would just say no connections found.
View 7 Replies View Relatedwithout the likes of logmein?If I enable remote login on my pc, what needs to be done in my router (if anything) so I can remote in from wherever I want? I am running Windows 8.1 pro X64 router is netgear R6300
View 7 Replies View RelatedUnable to figure out a default setting.
Simply for the home desktop and want to share with other kit on the home network.
When I boot up it appears I have to always tweak the settings :
1) Control Panel > System > Change settings > Network ID and select under "Select the option that best describes your network" so I opt for I tick "this is a home computer; it's not part of a business network."
2 )The reboot.
All works fine and all devices can be seen and read/write in accordance with the appropriate share settings.
Now the issue is when I next reboot the
Control Panel > System > Change settings > Network ID and select under "Select the option that best describes your network" will default to "This computer is part of a business network; I use it to connect to other computers at work".
So I have to got through steps 1 and 2 again.
How to I get Windows 8.1 Pro x64 to default to the "this is a home computer; it's not part of a business network." on each boot without having to manual configure.
I am trying to share a specific folder on my Windows 8 computer with my Windows 7 computer. They are both on the same network connected to the same router. The Windows 8 computer is connected through ethernet, while the Windows 7 computer is connected wirelessly.
Here are my settings on my Windows 8 Computer:
This is the error I get on my Windows 7 computer:
What's up with this? On a related note, is it possible to share this folder with a specific PC, rather than "Everyone" on the network?
I want to create a home network:
modem - Motorola SB 6180, from COX Communication
router - ASUS RT-AC-66U
gigabit switch - TP-LINK TL-SG1005D 10/100/1000Mbps Unmanaged
printer - HP LaserJet Pro 200 color with ethernet port
2 desktops, each running Win 8 Prox64
Cat 6 cables.
Plan A:
Cat 6 cable from modem to router
Cat 6 cable from router to switch
Cat 6 cables from switch to printer and desktops
I think this will give me wifi for my laptop and good connection speed between computers and printer.
I just bought my daughter a Lenovo running Windows 8 and when I try to connect to my Wi-Fi I am getting Limited connection only and can't figure it out.
View 5 Replies View RelatedI have 2 machines connected via my router/hub (wired). One is running Windows 8.1 and the other Windows 7. Previously I had them sharing perfectly until I did a reinstall of Windows 8 (upgraded to Windows 8.1). I get this message on both machines whilst trying to access shared drives (permissions enabled to read, write, modify for all users):
I have a local account on the windows 8.1 as per previous installation. I have checked all the usual sharing settings and they are the same as in the previous working installation on both machines. I have left the homegroup and created a new one on the windows 8 machine and rejoined on the windows 7 machine all to no avail.
I created a HOMEGROUP on computers A with PRINTER hooked up.. No problem with A, B, C printing.
Now I hooked up PRINTER to computers B. Computers A, B, C do not print (unless I hook up to A).
IMHO if all computers are on the same home network, they should be able to share the same functions. What should I do to hook up the printer to B and A, B, C will print?
I have three computers on my home network:
(a) desktop in the office with ASUS USB-N53 adapter
(b) new desktop in the office with fairly old Broadcom PCI 802.11g adapter
(c) media box hooked up to TV hard wired to router
I recently mapped a drive on system A so that it could be shared with system B (they are side by side). Unfortunately, upon trying to transfer files the speeds are terrible! I am only getting between 500kb/s and 1mb/s.Is this due to my relatively old wireless G adapter?
My laptop is few months old HP Pavilion g6 OS: Windows 8 uses a ralink rt5390r 802.11bgn wifi adapter.
The wifi was working just fine suddenly it stopped. It detects my home network but every time it tries to connect ends up "unable to connect to this network". It connects to my friends wifi but not mine. And it connects with cable.
There is a red cross on the wifi network but it's green not GREY. It is not a modem problem because the other PC connects just fine. When I'm on wifi, cmd ipconfig gives me disconnected media for all the network cards on the laptop. Command netsh shows failure and access denied.
What I have tried to do for the past week :
I upgraded the adapter/ driver. My windows is fully updated. I re-installed the network card. I tried a USB wifi. I uninstalled the private server. I uninstalled my Norton because I thought it was blocking the connection I also deactivated the windows fire wall. I changed the SSID and PSW ... nothing worked. and of course I tried restarting, resetting, rebooting, deactivating and activating, disabling and enabling every single thing but nothing works.
Using Windows 8 and XP on Home Networks and, unfortunately,I personally believe this is NOT POSSIBLE.
I should add however that my network, 1 Windows 8, 3 XP, 1 Laptop with Windows 7, 1 laptop with Linux, all did work until recently, so I think it is one of the Windows 8 updates have screwed up the system.
At about the same time I also started receiving notifications from Microsoft that XP would no longer be supported after April, so maybe there is something intentional here.
Something about 8 is diff than 7 with regard to setting up Network, and Type of network. This seems to default any new network connection to "Private", whatever that means. In order to share in a Homegroup I need the network type to be "Home".
View 8 Replies View RelatedI have a very fast internet connection and video plays fine on all media players on my machine with local video files and internet video but when I try to play video files from a storage drive on a shared Windows 7 machine on my home network the video will play fine for a few minutes then buffer some, then play choppy. It is very intermittent. Also when I open the Homegroup and click on a shared computer (I have several on my Home Network) it will give me an error message saying that the share is not available or cannot be found but if I wait approximately 30-45 seconds and try it again it will usually open the share. I have seen a lot of posts concerning Networking issues in Win 8, is there no fix because from all I have read it seems to be hit and miss. I really would like to get this issue resolved as this throws a monkey wrench in my plans for a HTPC.
View 6 Replies View RelatedIs there a way to hide devices connected to LAN port 4 on a modem-router from devices connected to the other 3 ports? And also in the other direction: hide all devices on ports 1 2 3 from anything attached to port 4 ?
Instead of specifying by LAN port, the white list of things to see each other could be selected by MAC address, as I only have three things I want to see and be seen on my home network. A black list system is no good because unknown new things might get connected to LAN port 4.
I have an unusual networking situation... I disabled wireless in my modem-router, so only the 4 ethernet ports work.
I have a desktop (Win 7) a laptop (Win 8.1) and a NAS connected to the router's ports 1 and 2 and 3. They are networked by a password protected homegroup.
I share my internet service with a friend in the next apartment, by one ethernet cable attached to port 4 on my modem-router. Now her friends are staying there while she is away for a few months. They are not easy to negotiate with and I can't ask them to make any changes to their computers.
It seems they have added some kind of switch or hub at their end of that one cable, because I often see two or more strange PCs listed in Windows Explorer networks folder. It even lists the 3 usernames on their PCs.
I shouldn't simply disconnect their ethernet cable, or they won't have internet access, but I don't like how their PCs show up in Windows Explorer. Also I guess my three devices are shown on their computers (but probably none of my folders are actually readable by them)
It seems "network discovery" is not selective about what devices it finds. It is simply on or off, and it must stay on for my homegroup network to work.
Should I try a different kind of networking in Windows, instead of a homegroup?
This morning I installed an optional update from Windows Update. It was Ralink Technology WLAN 802.11 wireless LAN card.
Since then, when I try to print to my wireless network printer, the network would disconnect then come back on after a while. The update shows up in Update History as successfully installed but not in the installed updates. System restore is of no support here. The network configuration page shows normal. The web does not appear to be affected. I made a new network connection for the printer but it did not work.
Is there a way to reverse this update or should I uninstall the 802.11 LAN card and let windows re-install anew.
The printer is a HP Officejet Pro 8600e
The other day, I built my first server (Well, not really built it, It was an HP Pavilion XD) I set it up perfectly with Windows Home Server 2011 and when I went to set up remote access, I get this (the attachments).
My router is a Linksys WRT160Nv2. I set up UPnP and did what Microsoft said here for my router: Windows Home Server Router Setup
Im new to the whole Windows 8 thing but am unable to load a webpage while connected to my home wireless.
Im using a hp envy dv7 laptop which was bought new. The wireless shows connected however webpages will not load.
I have plugged in a Ethernet cable and the everything works fine.
I'm looking for a skype like tool to use over my home LAN. Your definition of a LAN may be different than mine.. what I'm calling a LAN is my home network which is simply two different computers plugged into my AT&T modem/router. (one plugged in by hardwire and one on wireless)
My thinking is this.. I need to chat and video with family at home no one else but i don't want the chat audio and video going out over the internet then coming back to my house before we receive the data.. that takes too long and there are delays due to low bandwidth. I'm seeking to avoid this by keeping all the data from leaving my house and going out to the internet.
I have looked at SIP tools like Linphone but when i signed up and set it up, nowhere does it ask me for any LAN information.. It never asks me for or tries to detect any LAN settings - it looks like it's going out over the internet to some SIP servers someplace.. thats simply not going to work.
When I go to advanced system settings and choose Home instead of business, when I save and restart it is still on Business network. I have windows 8 pro 64 bit on a HP pavilion elite 8 gb ram i6 1tb drive. I have made sure that the services below are running as well as set to Auto.
o Computer Browser
o DHCP Client
o DNS Client
o Network Connections
o Network Location Awareness
o Remote Procedure Call (RPC)
o Server
o TCP/IP Netbios helper
o Workstation
Also, I have recently "refreshed" my computer which I thought had fixed it. It actually fixed the "turn file sharing" not saving issue I was having, now this.
best configuration for a home network if I am using a mixture of different computers, including Win 7, 8, and a new-ish Mac? The Mac has Lion.
If Macs are compatible with Homegroups or Workgroups or Domains? I am a little rusty on my understanding of their differences exactly.
I also have a router that I am planning on using with a network drive option for an external HDD. I have a couple mobile devices as well but I'm not very worried about their compatibility.
Since a few weeks, I have a problem with my laptop running Windows 8.1 (Toshiba Satellite P50-A-12PBE). Sometimes, after bringing Windows back from sleep mode, I seem to have no connection to the internet. Windows says the connection is 'limited', wether I'm connected with a wire or wireless. Resetting the router doesn't solve anything, but rebooting my pc does. Since both the wired and wireless network are always simultaneously affected, I think this hasn't anything to do with drivers (I already have the latest versions by the way). I have made screenshots with ipconfig-results when I'm connected with a wire.
View 7 Replies View RelatedMy wifi only works correctly at home. When at home, I have no problem and a good, solid internet connection. When I am anywhere else (friend's house, school, work, even my phone personal hotspot), I can connect to the internet with no problem, and it even shows as "internet" on the wifi screen so I know it is getting it. However, when I attempt to load a webpage it shows as if there is no internet. I have tried Chrome, Firefox, and Internet Explorer. I have done the ipconfig renew and release, when I do release it says "media disconnected". I have also tried forgetting the network and reconnecting.
Unfortunately I don't have access to the internet in these locations to troubleshoot.
