Network / Sharing :: Choppy Video Over Home Network
May 20, 2013
I have a very fast internet connection and video plays fine on all media players on my machine with local video files and internet video but when I try to play video files from a storage drive on a shared Windows 7 machine on my home network the video will play fine for a few minutes then buffer some, then play choppy. It is very intermittent. Also when I open the Homegroup and click on a shared computer (I have several on my Home Network) it will give me an error message saying that the share is not available or cannot be found but if I wait approximately 30-45 seconds and try it again it will usually open the share. I have seen a lot of posts concerning Networking issues in Win 8, is there no fix because from all I have read it seems to be hit and miss. I really would like to get this issue resolved as this throws a monkey wrench in my plans for a HTPC.
View 6 Replies
ADVERTISEMENT
Dec 30, 2013
I have a lenovo G505 laptop - it will no longer connect to my BT home hub despite it showing as being available. I suspect it might be to do with the fact that it is has a passkey - I entered it yesterday when prompted and it connected fine, but now I'm not being given the option of entering the key.
I've also tried connected using the BT wifi (as opposed to homehub) but once again it will not connect me. I've been through all the troubleshooting options, and searched under every term I can think of, but nothing is working.
View 2 Replies
View Related
Jul 19, 2013
I want to create a home network:
modem - Motorola SB 6180, from COX Communication
router - ASUS RT-AC-66U
gigabit switch - TP-LINK TL-SG1005D 10/100/1000Mbps Unmanaged
printer - HP LaserJet Pro 200 color with ethernet port
2 desktops, each running Win 8 Prox64
Cat 6 cables.
Plan A:
Cat 6 cable from modem to router
Cat 6 cable from router to switch
Cat 6 cables from switch to printer and desktops
I think this will give me wifi for my laptop and good connection speed between computers and printer.
View 9 Replies
View Related
Jun 29, 2014
without the likes of logmein?If I enable remote login on my pc, what needs to be done in my router (if anything) so I can remote in from wherever I want? I am running Windows 8.1 pro X64 router is netgear R6300
View 7 Replies
View Related
Dec 21, 2013
I just bought my daughter a Lenovo running Windows 8 and when I try to connect to my Wi-Fi I am getting Limited connection only and can't figure it out.
View 5 Replies
View Related
Mar 3, 2014
I have 2 machines connected via my router/hub (wired). One is running Windows 8.1 and the other Windows 7. Previously I had them sharing perfectly until I did a reinstall of Windows 8 (upgraded to Windows 8.1). I get this message on both machines whilst trying to access shared drives (permissions enabled to read, write, modify for all users):
I have a local account on the windows 8.1 as per previous installation. I have checked all the usual sharing settings and they are the same as in the previous working installation on both machines. I have left the homegroup and created a new one on the windows 8 machine and rejoined on the windows 7 machine all to no avail.
View 9 Replies
View Related
Jun 19, 2014
Unable to figure out a default setting.
Simply for the home desktop and want to share with other kit on the home network.
When I boot up it appears I have to always tweak the settings :
1) Control Panel > System > Change settings > Network ID and select under "Select the option that best describes your network" so I opt for I tick "this is a home computer; it's not part of a business network."
2 )The reboot.
All works fine and all devices can be seen and read/write in accordance with the appropriate share settings.
Now the issue is when I next reboot the
Control Panel > System > Change settings > Network ID and select under "Select the option that best describes your network" will default to "This computer is part of a business network; I use it to connect to other computers at work".
So I have to got through steps 1 and 2 again.
How to I get Windows 8.1 Pro x64 to default to the "this is a home computer; it's not part of a business network." on each boot without having to manual configure.
View 9 Replies
View Related
Jul 17, 2014
I created a HOMEGROUP on computers A with PRINTER hooked up.. No problem with A, B, C printing.
Now I hooked up PRINTER to computers B. Computers A, B, C do not print (unless I hook up to A).
IMHO if all computers are on the same home network, they should be able to share the same functions. What should I do to hook up the printer to B and A, B, C will print?
View 2 Replies
View Related
Jun 8, 2014
I have three computers on my home network:
(a) desktop in the office with ASUS USB-N53 adapter
(b) new desktop in the office with fairly old Broadcom PCI 802.11g adapter
(c) media box hooked up to TV hard wired to router
I recently mapped a drive on system A so that it could be shared with system B (they are side by side). Unfortunately, upon trying to transfer files the speeds are terrible! I am only getting between 500kb/s and 1mb/s.Is this due to my relatively old wireless G adapter?
View 9 Replies
View Related
Feb 27, 2013
My laptop is few months old HP Pavilion g6 OS: Windows 8 uses a ralink rt5390r 802.11bgn wifi adapter.
The wifi was working just fine suddenly it stopped. It detects my home network but every time it tries to connect ends up "unable to connect to this network". It connects to my friends wifi but not mine. And it connects with cable.
There is a red cross on the wifi network but it's green not GREY. It is not a modem problem because the other PC connects just fine. When I'm on wifi, cmd ipconfig gives me disconnected media for all the network cards on the laptop. Command netsh shows failure and access denied.
What I have tried to do for the past week :
I upgraded the adapter/ driver. My windows is fully updated. I re-installed the network card. I tried a USB wifi. I uninstalled the private server. I uninstalled my Norton because I thought it was blocking the connection I also deactivated the windows fire wall. I changed the SSID and PSW ... nothing worked. and of course I tried restarting, resetting, rebooting, deactivating and activating, disabling and enabling every single thing but nothing works.
View 9 Replies
View Related
Jul 20, 2012
Something about 8 is diff than 7 with regard to setting up Network, and Type of network. This seems to default any new network connection to "Private", whatever that means. In order to share in a Homegroup I need the network type to be "Home".
View 8 Replies
View Related
Feb 22, 2014
Is there a way to hide devices connected to LAN port 4 on a modem-router from devices connected to the other 3 ports? And also in the other direction: hide all devices on ports 1 2 3 from anything attached to port 4 ?
Instead of specifying by LAN port, the white list of things to see each other could be selected by MAC address, as I only have three things I want to see and be seen on my home network. A black list system is no good because unknown new things might get connected to LAN port 4.
I have an unusual networking situation... I disabled wireless in my modem-router, so only the 4 ethernet ports work.
I have a desktop (Win 7) a laptop (Win 8.1) and a NAS connected to the router's ports 1 and 2 and 3. They are networked by a password protected homegroup.
I share my internet service with a friend in the next apartment, by one ethernet cable attached to port 4 on my modem-router. Now her friends are staying there while she is away for a few months. They are not easy to negotiate with and I can't ask them to make any changes to their computers.
It seems they have added some kind of switch or hub at their end of that one cable, because I often see two or more strange PCs listed in Windows Explorer networks folder. It even lists the 3 usernames on their PCs.
I shouldn't simply disconnect their ethernet cable, or they won't have internet access, but I don't like how their PCs show up in Windows Explorer. Also I guess my three devices are shown on their computers (but probably none of my folders are actually readable by them)
It seems "network discovery" is not selective about what devices it finds. It is simply on or off, and it must stay on for my homegroup network to work.
Should I try a different kind of networking in Windows, instead of a homegroup?
View 9 Replies
View Related
Aug 12, 2013
I am trying to share a specific folder on my Windows 8 computer with my Windows 7 computer. They are both on the same network connected to the same router. The Windows 8 computer is connected through ethernet, while the Windows 7 computer is connected wirelessly.
Here are my settings on my Windows 8 Computer:
This is the error I get on my Windows 7 computer:
What's up with this? On a related note, is it possible to share this folder with a specific PC, rather than "Everyone" on the network?
View 5 Replies
View Related
Nov 19, 2013
I have recently up-graded my laptop from 8 to 8.1. Since that time, the laptop will not automatically connect to my home wifi. If I try to connect manually, it will say "unable to connect to network" and that's it, no more clues! The only way I can connect is by selecting 'restart' and then it will re-boot and connect automatically. If I 'shut-down' after use (or hibernate) it will not re-connect until I have selected 're-start' which is time consuming and annoying!
View 2 Replies
View Related
Mar 30, 2014
Using Windows 8 and XP on Home Networks and, unfortunately,I personally believe this is NOT POSSIBLE.
I should add however that my network, 1 Windows 8, 3 XP, 1 Laptop with Windows 7, 1 laptop with Linux, all did work until recently, so I think it is one of the Windows 8 updates have screwed up the system.
At about the same time I also started receiving notifications from Microsoft that XP would no longer be supported after April, so maybe there is something intentional here.
View 7 Replies
View Related
Mar 26, 2013
my computer is Dell inspiron 15 win 8 x64 I have problem with my home wifi network; I cant connect ''the settings saved on this computer for the network do not match the requirements of the network'' but when I try other wireless its work
View 2 Replies
View Related
Feb 12, 2014
I'm looking for a skype like tool to use over my home LAN. Your definition of a LAN may be different than mine.. what I'm calling a LAN is my home network which is simply two different computers plugged into my AT&T modem/router. (one plugged in by hardwire and one on wireless)
My thinking is this.. I need to chat and video with family at home no one else but i don't want the chat audio and video going out over the internet then coming back to my house before we receive the data.. that takes too long and there are delays due to low bandwidth. I'm seeking to avoid this by keeping all the data from leaving my house and going out to the internet.
I have looked at SIP tools like Linphone but when i signed up and set it up, nowhere does it ask me for any LAN information.. It never asks me for or tries to detect any LAN settings - it looks like it's going out over the internet to some SIP servers someplace.. thats simply not going to work.
View 5 Replies
View Related
Feb 9, 2013
When I go to advanced system settings and choose Home instead of business, when I save and restart it is still on Business network. I have windows 8 pro 64 bit on a HP pavilion elite 8 gb ram i6 1tb drive. I have made sure that the services below are running as well as set to Auto.
o Computer Browser
o DHCP Client
o DNS Client
o Network Connections
o Network Location Awareness
o Remote Procedure Call (RPC)
o Server
o TCP/IP Netbios helper
o Workstation
Also, I have recently "refreshed" my computer which I thought had fixed it. It actually fixed the "turn file sharing" not saving issue I was having, now this.
View 5 Replies
View Related
Mar 15, 2013
best configuration for a home network if I am using a mixture of different computers, including Win 7, 8, and a new-ish Mac? The Mac has Lion.
If Macs are compatible with Homegroups or Workgroups or Domains? I am a little rusty on my understanding of their differences exactly.
I also have a router that I am planning on using with a network drive option for an external HDD. I have a couple mobile devices as well but I'm not very worried about their compatibility.
View 3 Replies
View Related
Nov 9, 2013
My wifi only works correctly at home. When at home, I have no problem and a good, solid internet connection. When I am anywhere else (friend's house, school, work, even my phone personal hotspot), I can connect to the internet with no problem, and it even shows as "internet" on the wifi screen so I know it is getting it. However, when I attempt to load a webpage it shows as if there is no internet. I have tried Chrome, Firefox, and Internet Explorer. I have done the ipconfig renew and release, when I do release it says "media disconnected". I have also tried forgetting the network and reconnecting.
Unfortunately I don't have access to the internet in these locations to troubleshoot.
View 2 Replies
View Related
Apr 24, 2014
I want basicly to home host a VPN, and that is what i do at the moment. So i tried with my friend after i did finish the setup (i did setup the VPN in the Windows Networks interface, over "Incomming Connections"), and i did portforward 1723, and the worst is, that when my friend connects upto the VPN from his PC at his home (not Local), to my IP, then it says on my PC he is connected.
But here comes the problems, at his PC, the Network Icon turns into a yellow warning icon, and when he clicks troubleshoot, it says "DNS Server does not respond", but at my PC here, it even says he is connected to the VPN, but also says no connection over IPv4, and the same on his side.
What can we do to get a connections from my PC to his PC, over the VPN, so he can access the Internet over my Internet instead, like lets say he has a blockade on for example www.facebook.com at home (which he of course doesn't has, it is just an example), and he connects to my VPN, as he accesses my Internet instead, he can open www.facebook.com, instead of having it blocked (one of the main purposes for a VPN, and the data encryption of course).
Here some screenshots:
My PC (Language = German):
My Friends PC (Language = Norwegian):
And as you can see on my PC, it says he is connected, and as you can see on his PC, it also says he is connected, but he cant access the Internet, or anything else related to the web. Now prepare for the funny part: We were on Skype, and as he connected to the VPN, and "lost" the Internett Access, we were still talking (i guess that's because Skype still runs over the home network, while the rest tries to access internet over the VPN connection .
View 8 Replies
View Related
Dec 16, 2012
Some times the home group icon will be displayed on my desktop screen and some times it disappears. why is it so?
View 9 Replies
View Related
May 11, 2014
The other day, I built my first server (Well, not really built it, It was an HP Pavilion XD) I set it up perfectly with Windows Home Server 2011 and when I went to set up remote access, I get this (the attachments).
My router is a Linksys WRT160Nv2. I set up UPnP and did what Microsoft said here for my router: Windows Home Server Router Setup
View 9 Replies
View Related
Oct 22, 2013
I took a 10:42 minute video with my camera. It's 1.28 GB and the file type MTS. The issue is I need to email it and it's too big of a file to send whole. I'm not in favor of chopping it up, but will if this is the best idea. I want to keep the video private between a few people. I am aware most place such as youtube, vimeo(not enough space) and dropbox all have privacy settings. Though waiting eight hours for an upload is a bit lengthy.
View 2 Replies
View Related
Sep 4, 2013
I've just installed my Windows 8.1 and ran into a little problem that keeps me away from using Windows 8. So, as I try to watch any video on Youtube (or anywhere else) or downloading few programs after 2-5 minutes of video or download time the internet disappears.
I've tried disabling Firewall, play with other settings but nothing works at all. After the disappearance of the internet I have to restart my PC (because without restart Troubleshoot seems to do nothing) and run Troubleshoot. It says that my Wi-fi is shut down but I skip this one, because my internet is on cable. So then I get another "Problem found" and it says "The Ethernet adapter is disabled".
View 3 Replies
View Related
May 20, 2013
I own a ASUS RT-N66U and I have consistent buffering issues (pretty major one at that) and this has gotten worst over time. I can't stream a single 30 minute video without the connection buffering 3-4 times and I'm talking about 30-60 seconds a pop. It's rather annoying. I am also running the latest firmware with my router.
I have one PC in which my router is connected too. I also have the following devices on my network.
Apple TV x2
iPad
iPhone x3
IPod
View 9 Replies
View Related
Nov 10, 2013
I am trying to find a definitive answer to the question of mapping external hard drives. I have 4 external hard drives and would like to know if there is benefit in mapping them or not. Is there benefit in speed/response etc.... I do a lot of video streaming through media centre to xbox 360.
View 2 Replies
View Related
Aug 2, 2013
Is there a way to setup network profiles or something so that when I bring my Surface Pro to work and connect to the wireless network there it will use the static ip address I have but when I disconnect and then connect to my home wifi it will go back to DHCP? On my MacBook Pro I can go into the network settings and change the location profile I have setup for networks but I don't see anything like this for Windows 8.
View 4 Replies
View Related
Feb 27, 2013
This morning I installed an optional update from Windows Update. It was Ralink Technology WLAN 802.11 wireless LAN card.
Since then, when I try to print to my wireless network printer, the network would disconnect then come back on after a while. The update shows up in Update History as successfully installed but not in the installed updates. System restore is of no support here. The network configuration page shows normal. The web does not appear to be affected. I made a new network connection for the printer but it did not work.
Is there a way to reverse this update or should I uninstall the 802.11 LAN card and let windows re-install anew.
The printer is a HP Officejet Pro 8600e
View 5 Replies
View Related
May 25, 2014
Windows 8.1 Pro with Media Center,
Windows 8.1
Comcast Gateway.
Pro Media can access 8.1 Network and Homegroup.
8.1 cannot access ant Pro Media. Network Error "Windows cannot access DesktopUsersPeteDocuments' (or any other folder)
Can access IP4 address.
Windows 8.1 new machine, came with 8, updated to 8.1 then 8.1 Update.
View 5 Replies
View Related
Jun 4, 2013
Lately, my metro apps (except Store) have not been able to connect to the internet. However, today I discovered that when I connect to a VPN or set my network to public, I can freely use Netflix or whichever network-dependent app I want. Why this happens? Also, what do I lose when my network is set to public?
View 7 Replies
View Related
