Lately, my metro apps (except Store) have not been able to connect to the internet. However, today I discovered that when I connect to a VPN or set my network to public, I can freely use Netflix or whichever network-dependent app I want. Why this happens? Also, what do I lose when my network is set to public?
View 7 RepliesMy wifi only works correctly at home. When at home, I have no problem and a good, solid internet connection. When I am anywhere else (friend's house, school, work, even my phone personal hotspot), I can connect to the internet with no problem, and it even shows as "internet" on the wifi screen so I know it is getting it. However, when I attempt to load a webpage it shows as if there is no internet. I have tried Chrome, Firefox, and Internet Explorer. I have done the ipconfig renew and release, when I do release it says "media disconnected". I have also tried forgetting the network and reconnecting.
Unfortunately I don't have access to the internet in these locations to troubleshoot.
I have two, probably connected, issues with my new Windows 8.1-running laptop.
Recently, and very suddenly, all Windows 8 metro apps have stopped working.
A typical experience: Swipe for charms bar > Settings > Change PC settings .... This then takes me to the metro start screen. If I press the windows key, it shows me the settings icon in full screen for a few seconds then takes me back to the start screen. This happens for every app!
(I have followed this, but to no avail: Can't access "Change PC Settings" in Win 8 - Microsoft Community.)
Also, I have been getting the 'No apps are installed to open this kind of link' error message when opening a magnet link in uTorrent and selecting to download a program from the BBC iPlayer website, using the previously installed BBC iPlayer Downloads program for windows.
I have reinstalled both programs, restarted multiple times and used CC Cleaner to try repair any possible damage to the registry, but all this has had no effect. I have tried to open both magnet links and iPlayer downloads using Internet Explorer instead, but this hasn't done anything either.
Other Relevant Info:
I have recently tried Iobit's Advanced System Care (or, ASC) programs, but I uninstalled them all because I suspected they were causing at least some of the issues. As far as I know, the internet link problem (#2) started first. In the past, I have had to reinstall the BBC iPlayer Downloads program because it would lose saved programs and stop working because (I think) ASC deleted some of its temporary files.
Edit: Also, the problems seem to coincide with the recent 8.1 update... but that isn't necessarily relevant.
when I used one of my Metro App(Asphalt 8), The game showed the Gameloft logo but right after that it crashed.
Then I used another app which was Weather.. but it worked fine.. Again I tested Facebook app and it also crashed...
So then I downloaded one app (Flappy Birds Free) and it also crashed.. So I think that the downloaded apps are getting crashed.. I tried several fixes like using another user, turning off Windows Defender and Firewall, Clean booting, Updating Video drivers, scanning for viruses, using Metro apps troubleshooter, sfc /scannow, and all sorts of things.. There is only one more option left and that is to refresh Windows. But I don't have 8 CD. It got broken.. and I can't afford to buy a new one.. What should I do now?
it installs without a hitch, comes up, runs fine ... just don't try running any Metro apps because most of them won't work - the screen resolution I have is something like 1024 x 600 (fine for this device) but that's too small for most apps. The desktop is fine but virtually nothing else can be run outside that.
I like my little netbook but Windows 8 doesn't. I made an image of that drive becuase I'll be restoring that soon.
Running Windows 8.1. Have admittedly modified it quite heavily but what I have screwed up.
Pretty much, any apps which have the purple wheel splash screen do not load (presumably crash). Normal windows settings work fine. Windows applications and Metro apps works with no hitches (I have none downloaded but default Music, Games all start with no issues).
When I upgraded from 8 to 8.1 my 8 network got change from public to private under 8.1. I need it to be public and I can find no way to do that. Is it possible?
I tried setting up another network via Network and Sharing Center but after choosing Set up a New Network the window does nothing. It said it might take 90 seconds to for the new devices to appear. Well it has been closer to 90 minutes and still nothing.
Since I've got windows 8 nobody was able to connect to me via hamachi, though it works when two others who have windows 8 connect to each other, so i was looking for what was different, and apparently it doesnt let through any data when it's set to "public network".
The problem here is that usually you change it by clicking on the network symbol, right-clicking your network and turn sharing on or off, but hamachi makes up another network which isn't listed in the primary interface. I've tried many things already and I'm kind of looking for a direct cmd-Command which allows me to change it quickly.
So, basically, I try to change a network-setting from public to private without using the "normal way to do it".
I am trying to change my wireless network profile from public to private, but cannot for the life of me figure out how...
Network Location - Set to Private or Public in Windows 8
^^ Those instructions no longer work on 8.1, and when I go into PC Settings > Network > Tap my network I see no options to enable sharing. I don't have Pro on this particular tablet so I have no access to gpedit.msc nor secpol.msc. What the hell do I have to do to change it? Other than this one ridiculous fault, I think 8.1 is far better than 8 (so far anyway.)
I'm also trying to change my public network to private.
"Hit Winkey + R to open Run prompt and type gpedit.msc" When I follow this I get an error message saying that gpedit.msc can't be found. I'm running win 8 on a Lenovo Think Pad.
I went back through the last few pages but didn't see something similar. Using 8.1.
Just had to setup a new network. Switched it to private and wanting to require password requirements for log on. However, when I turned on my IPod to test it out, my IPod connected without me getting a password prompt.
I'm know I'm missing something, just not where. Checked both the PC settings screen, as well as the Network Screen under the Control Panel.
I can't join my homegroup, it randomly stopped working a week ago (ish) when i try to reconnect to the homgroup now it says "A homegroup can only be created on a private network...change settings blah bah..." Although I have everything setup correctly and i'm trying to join a homegroup not make one. I read,
Homegroup - Create in Windows 8 and Homegroup - Join in Windows 8 did everything still nothing :I the 2 other computers connected to the main homegroup computer is working fine. Now i can't think of anything.
How can I change public network to private in win8.1.
View 9 Replies View RelatedI thought I would look at creating/using my own media.
I have been using VMs for testing these, so much better than playing with someone's PC
I have ISOs for both 8.0 and 8.1 which I downloaded using Windows 8 and Windows 8.1 ISO - Download or Create. The licence key I used for the download was my legitimate one that I purchased from Microsoft (so it wasn't OEM), it is actually an upgrade key from Windows 7 for Win 8 Pro. I can install these ISOs no problem but they always install the Pro version and I never get an option for installing Home.
I tried putting a ei.cfg file in the sources directory containing
[EditionID]
[Channel]
Retail
[VL]
0
But this just allows me to install without the key. I tried putting both "Core" and "Home" in as an EditionID but the install process fails saying "The product key entered does no match any of the Windows images available for installation. Enter a different product key"
If I try using the downloaded iso without the ei.cfg file but instead use the generic key for Home I get the same message.
So I'm pretty sure the downloads I got from MS just contain Pro. Is this right or is there a special way of making Home available? Based upon what I have seen in the forums I would also probably need "Home Single Language" to be available as well (if possible).
In case it makes any difference the ISOs I have always set their language to English (United Kingdom) during the install.
How do I change an internet connection to be private instead of public as my computer blocks all connections to other computers on a public network and i am using multiple laptops so i would like to be able to use homegroup properly.
View 3 Replies View RelatedHow to change my current profile(public or guest) to private
View 2 Replies View RelatedI had this problem where the metro apps could access the internet when i used a usb modem. The problem just disappeared but for the metro apps to use the internet on the usb modem i had to connect it via the modem's dashboard. If i connect via the Network side bar(the blue one with the list of networks), metro apps won't work.
I used to get this error before ''datamarket.accesscontrol.windows.net could not be resolved'
Another problem came up. When i use a cdma modem(ZTE Modem) and i connect it via its dashboard, metro apps won't access the internet.
Another thing is that not all metro apps behave this way. The mail app,internet explorer,messaging and people app always work.
From the screenshot you can see that the Internet explorer works but bing search doesn't.
My weather, news, finance, travel and maps tiles can never connect to internet even though I can, at the same time, browse and download. I tried to figure it out in many ways but failed eventually . When I click any of those tiles, it opens and a message pops up and says the app cannot connect to the internet. The network indicator on top-right side of the tile also shows 'Offline'. The tiles show sample data only. My computer gets automatically connected to internet after log in. So the tiles should have got connected.
I have windows 8 pro .
I have installed Windows 8 RP, and everything works fine, except I cannot access internet from metro apps: IE, Store, New, Mail etc. Does not access internet, even though I have access to internet from Desktop? I have tried everything, and googled for hours without any useful result.
View 3 Replies View RelatedI connected an Ethernet cable at my workplace to a Windows 8 laptop. At the bottom right in desktop, the network symbol has a yellow exclamation sign and says "No internet access"/"Limited". This is a secured intranet, so I logged in with my company credentials when the browser started.
The IE browser connects to the internet normally. When I open metro apps such as Weather, it says the Internet is offline.
I know posts have been circulating around this topic but none that directly address my needs. I just recently did a fresh install of Windows 8 onto a brand new SSD. I then set all of my documents to be on my traditional hard drive. Everything worked perfectly for about one day then my metro apps stopped connecting to the internet. I am on the internet currently using the desktop application of Chrome and all of my desktop applications connect to the internet. Additionally my computer tells me it is connected to the internet and troubleshooting identifies no problems.
Here's the problem all of my metro apps will not connect to the internet. The "Store" app says that my computer is not connected to the internet. The weather app opens but does not refresh, and most of my apps do the same thing. they have a constant loading symbol.
I have no antivirus installed. I did install PocketCloud Windows Companion VPN service so that I can access my computer with my tablet. I have scavenged all the forums and there seems to be no answer. Is this just a problem of Microsoft's?
I have 3 user accounts.
1. Administrator
2. initial user
3. new user
So the initial user is the one you are forced to create when first setting up Windows 8.1. It's a local user meaning that I set it up without signing into a MSA.
In both the Administrator and the initial user, all the WinRT apps/tiles work. Like the weather will show up and everything.
Whether I change the Initial User to Standard or Administrator, everything still works fine. Of course, the Administrator can't open WinRT apps which is standard and normal. And the initial user can't use apps without signing into MSA. But it all still works perfectly fine.
The problem is with the new user. The new user is meant to be in Administrator mode because it's my main account. But whether I set it up as Standard or Administrator, it's the same thing. None of my WinRT apps work.
Even when I sign into my MSA with the new user, it's still the same thing. It synchronizes to my OneDrive online. It recognizes that I'm completely signed in online. Yet it's still the exact same thing with the WinRT apps. None of them work. Even when I try to open up the Windows Store. It just continues to try to open, but doesn't go all the way through. So whether I'm signed into my MSA for the third user or not, it still gives the same problem.
I ran Windows Update, and it worked perfectly. Everything is up to date.
I have a lenovo G505 laptop - it will no longer connect to my BT home hub despite it showing as being available. I suspect it might be to do with the fact that it is has a passkey - I entered it yesterday when prompted and it connected fine, but now I'm not being given the option of entering the key.
I've also tried connected using the BT wifi (as opposed to homehub) but once again it will not connect me. I've been through all the troubleshooting options, and searched under every term I can think of, but nothing is working.
I want to create a home network:
modem - Motorola SB 6180, from COX Communication
router - ASUS RT-AC-66U
gigabit switch - TP-LINK TL-SG1005D 10/100/1000Mbps Unmanaged
printer - HP LaserJet Pro 200 color with ethernet port
2 desktops, each running Win 8 Prox64
Cat 6 cables.
Plan A:
Cat 6 cable from modem to router
Cat 6 cable from router to switch
Cat 6 cables from switch to printer and desktops
I think this will give me wifi for my laptop and good connection speed between computers and printer.
without the likes of logmein?If I enable remote login on my pc, what needs to be done in my router (if anything) so I can remote in from wherever I want? I am running Windows 8.1 pro X64 router is netgear R6300
View 7 Replies View RelatedI just bought my daughter a Lenovo running Windows 8 and when I try to connect to my Wi-Fi I am getting Limited connection only and can't figure it out.
View 5 Replies View RelatedI have 2 machines connected via my router/hub (wired). One is running Windows 8.1 and the other Windows 7. Previously I had them sharing perfectly until I did a reinstall of Windows 8 (upgraded to Windows 8.1). I get this message on both machines whilst trying to access shared drives (permissions enabled to read, write, modify for all users):
I have a local account on the windows 8.1 as per previous installation. I have checked all the usual sharing settings and they are the same as in the previous working installation on both machines. I have left the homegroup and created a new one on the windows 8 machine and rejoined on the windows 7 machine all to no avail.
Unable to figure out a default setting.
Simply for the home desktop and want to share with other kit on the home network.
When I boot up it appears I have to always tweak the settings :
1) Control Panel > System > Change settings > Network ID and select under "Select the option that best describes your network" so I opt for I tick "this is a home computer; it's not part of a business network."
2 )The reboot.
All works fine and all devices can be seen and read/write in accordance with the appropriate share settings.
Now the issue is when I next reboot the
Control Panel > System > Change settings > Network ID and select under "Select the option that best describes your network" will default to "This computer is part of a business network; I use it to connect to other computers at work".
So I have to got through steps 1 and 2 again.
How to I get Windows 8.1 Pro x64 to default to the "this is a home computer; it's not part of a business network." on each boot without having to manual configure.
I created a HOMEGROUP on computers A with PRINTER hooked up.. No problem with A, B, C printing.
Now I hooked up PRINTER to computers B. Computers A, B, C do not print (unless I hook up to A).
IMHO if all computers are on the same home network, they should be able to share the same functions. What should I do to hook up the printer to B and A, B, C will print?
I have three computers on my home network:
(a) desktop in the office with ASUS USB-N53 adapter
(b) new desktop in the office with fairly old Broadcom PCI 802.11g adapter
(c) media box hooked up to TV hard wired to router
I recently mapped a drive on system A so that it could be shared with system B (they are side by side). Unfortunately, upon trying to transfer files the speeds are terrible! I am only getting between 500kb/s and 1mb/s.Is this due to my relatively old wireless G adapter?
My laptop is few months old HP Pavilion g6 OS: Windows 8 uses a ralink rt5390r 802.11bgn wifi adapter.
The wifi was working just fine suddenly it stopped. It detects my home network but every time it tries to connect ends up "unable to connect to this network". It connects to my friends wifi but not mine. And it connects with cable.
There is a red cross on the wifi network but it's green not GREY. It is not a modem problem because the other PC connects just fine. When I'm on wifi, cmd ipconfig gives me disconnected media for all the network cards on the laptop. Command netsh shows failure and access denied.
What I have tried to do for the past week :
I upgraded the adapter/ driver. My windows is fully updated. I re-installed the network card. I tried a USB wifi. I uninstalled the private server. I uninstalled my Norton because I thought it was blocking the connection I also deactivated the windows fire wall. I changed the SSID and PSW ... nothing worked. and of course I tried restarting, resetting, rebooting, deactivating and activating, disabling and enabling every single thing but nothing works.