Hardware Drivers :: Brother MFC-9330CDW Appears In Device Manager But With Yellow Exclamation
Jul 29, 2013
I cannot get the scanning component of my new printer to work. The "scanner" appears in device manager but has an error (yellow exclamation), it seems that the installation of the scanner network driver fails every time I try to install it. The printer prints fine just will not scan. I have it wirelessly installed and am using Windows 8.1 currently.
How to get it works as I am totally out of ideas after numerous uninstall and reinstalls.
View 9 Replies
ADVERTISEMENT
Sep 11, 2012
After I upgraded my windows 7 to windows 8 pro I had this problem . There are four devices that have a yellow exclamation mark showing in the Device manager.
They are WAN Miniport (IKEv2 / L2TP/PPTP/SSTP)
All of them show this error: This device is not working properly because Windows cannot load the drivers required for this device. (Code 31)
I don not know what these devices do or how to fix it .. I have also problem in Merto apps they cannot connect to the internet even though I can browse and download .. I do not know if those WAN Miniport devices cause this problem.
View 2 Replies
View Related
Jan 16, 2014
My wifi on my laptop keeps acting up. at a random time the wifi bar in the lower right hand side turns to a yellow exclamation mark over it, after hovering over it it says 'limited'. Usually if i just turn off the wifi then immediately on again it will sort it out.
Can't work out if its a driver issue, my isp or a windows 8.1 issue. The laptop i have is an assus k53sv. the driver i have installed is 'Qualcomm Atheros AR9002WB-1NG'.
View 1 Replies
View Related
Apr 17, 2014
when look in the device manager i get this:
[URL]
and PCI Device above this to unknown device ( i took this photo from google)
when i try to delete it back after restart or Scan hardware change
lenovo ThinkPad Edge E540 20C6006JIV win 8.1
View 9 Replies
View Related
Jul 22, 2014
I've installed Microsoft Windows 8.1 Version 6.3.9600 Build 9600 on my HP 430 Notebook PC with 1 GB RAM and Pentium CPU @ 2GHz 2 Cores.
Display drivers are not working properly (i.e., everything appears bigger and unclear), earlier I'd successfully updated the display drivers and made it work using Device Manager. making a backup of the drivers (may be in .inf format) from the installed drivers so that I don't have to update it every time I re-install it.
View 7 Replies
View Related
Sep 15, 2014
I'm running Windows 8.1 on a SDD with a second HDD along side it. Inside the Device Manager I disabled my second HDD and rebooted my system.
Windows started as normal, but a few key windows programs have stopped working:
- Task Manager
- Device Manager (basically all control panel functions)
- Powershell (Command Prompt Works, but can't be opened with administrative rights)
The main problem is that I now can't enable my second HDD. Why the HDD is needed for these programs and how I can re-enable my HDD?
View 2 Replies
View Related
Mar 1, 2014
I installed my fresh Windows 8.1 Enterprise 64 bits (build 9600), on my Acer V3-571G laptop.
When I go to device manager, and I want uninstall this driver.
--> Imaging devices
--> and Bluetooth,
When I Disable and Uninstall them, then, it's seems te drivers are gone! But when I restarts mine Laptop, the Imaging devices and bluetooth, comes back?
How I can complete remove that? In the standard Windows 8 (not 8.1) that was possible? But 8.1?
View 9 Replies
View Related
Feb 24, 2013
Bluetooth worked once. Now the device does not show in device manager under network adapters. What can I do? Is the adapter broken?
View 3 Replies
View Related
Sep 15, 2014
I recently bought a used Sapphire HD7970 GHZ Edition 3GB, which I got quite cheaply but it did need a little work doing to it.
Firstly the fan cable had, in the hands of the original user, somehow snapped and they had repaired it to run on a normal motherboard 4 pin fan lead. When I got the card the DIY repair had practically fallen apart but I was able to reconnect it all and both fans do spin (not sure if they are running fast enough but they are spinning and moving a little bit of air).
Anyway, second problem was the card had one of the two BIOSes flashed with an incorrect BIOS (seller said it was a BIOS of a different model of 7970) and needs reflashing.
So I fixed the fan lead, verified at least some cooling was happening and was able to get to Windows (8.1 64 bit) with it. However, in the device manager the card has the yellow exclamation mark and says "Windows has stopped this device because it has reported problems. (Code 43)". I tried installing the AMD drivers regardless but they fail with warnings though still prompt to reboot, I rebooted on the hope they might have still installed but next thing Windows blue screens (well the Windows 8 version of it) with an unhandled exception warning and does this every time until I make it do a system restore then the card operates like it did before in that it outputs a picture but won't take the driver and fails to run anything more than 2D applications.
The seller has confirmed the good BIOS is already selected (he said it won't even boot to Windows on the other one) and recommended some beta drivers but these didn't work. I have also tried using Display Driver Uninstaller to remove all traces of old drivers (and manually deleted all AMD/ATI files and registry references) but no progress.
So why am I getting the code 43? Is there a diagnostic program that can tell me exactly what is stopping the card from working? How I might get this card up and running again?
View 1 Replies
View Related
Apr 21, 2013
My audio disappeared and stopped working. my audio icon has a red x on it and when i click it it wants to detect problems (it doesn't work).
what should i do? how should I diagnose the audio? I feel like this is hardware problem as it just happened out of the blue. The audio board has a USB connection (which is working) so the connection from it to the mother board is fine.
Installing and updating the driver did nothing. I can't get the device manager to detect the hardware (scanning does nothing).
View 9 Replies
View Related
Sep 30, 2013
I have a Brother HL 2270DW printer in one room of my house. Each of my two Win7 machines, all in different rooms, print to this printer wirelessly with no problems. However, my new Dell One 2020 detects the the printer as a wireless printer but reports something like 'Driver Unavailable' in Settings/Devices. How do I go about making a driver available? I have the latest Brother drivers on my HD but can't seem to figure out how to install them under Win 8. The CD that came with the printer has only very old, out of date drivers.
View 2 Replies
View Related
Feb 4, 2013
an error message in Device Manager when installing the network attached storage drives like MyBook Live, the drives themselves seem to work fine and i have access to them (most of the time) on my home netwok, however i keep getting that little yellow triangle telling me that something is wrong, specifically:
the device manager error code is This device cannot start. (Code 10)
View 1 Replies
View Related
Jun 19, 2013
I can not found Imaging Device option , due to which my integrated webcam is not working ... I am Using Dell inspiron 5520 , I have tried millions of things ...
View 13 Replies
View Related
Dec 13, 2013
I am trying to install a driver for the Epson perfection 1200U on my grandpa's new windows 8 PC. Problem is that the scanner is too old and epson doesnt provide a driver for this scanner for windows 8. But how to uncheck "show compatible hardware" in device manager when you are trying to update drivers on a specific device.
I get there by right clicking on the device, selecting properties, "browse my computer for driver software," then "let me pick from a list of device drivers on my computer," then after that the window that appears does not have an option to uncheck "show compatible hardware." And so I can't continue
View 3 Replies
View Related
Mar 19, 2013
For some unknown reasons, whenever I tried to install the Wi-fi driver on my laptop, after proceeding setup file agreements nothing happens.
My laptop is compaq 610 and I've tried installing latest drivers downloaded from softpedia.
In the device manager, I got the exclamation mark for wi-fi driver. In properties window, this is showing that device can not start.
View 5 Replies
View Related
Apr 23, 2014
I built my PC from scratch on Friday 18th April. On the evening of 21st April I turned my PC on and saw a USB error popping up in a yellow box on the bottom right of my screen. This error was popping up every 5 se conds without fail.
I tried to uninstall the drivers for all USB ports and reinstall but this didn't work. Instead I inspected the error from my Device Manager and read this:
"Windows has stopped this device because it has reported problems. (Code 43) A request for the USB device descriptor failed." ((Port_#0011.Hub_#0003)) My USB devices
I have a Gigabyte H87 3HD Motherboard, a Nvidia GTX 760 graphics card, Intel i5 4440 Quad core processor, EVGA 650w Power Supply. I have Windows 8.1 64-bit as an OS.
With all my USB devices plugged in or without ANY plugged in, the error still pops up regardless. This leads me to believe it could be a problem with the motherboard itself.
I have tried the following solutions:
On and Off againUpdated BIOS to F6 VersionUpdated Windows 8.1Updated Chipset + all DriversWindows Hot FixesUsing CMD and NetMon to asses the USB portsSystem restore
I even right clicked on the error on the Device Manager, uninstalled and the error was still pinging up. Is my computer haunted? None of these have worked. I feel like I have exhausted all my options hence why I have named the thread as such.
View 3 Replies
View Related
Mar 1, 2014
I installed my fresh Windows 8.1 Enterprise 64 bits (build 9600), on my Acer V3-571G laptop.
When I go to device manager, and I want uninstall this driver.
--> Imaging devices
--> and Bluetooth,
When I Disable and Uninstall them, then, it's seems te drivers are gone! But when I restarts mine Laptop, the Imaging devices and bluetooth, comes back?
Why is that? How I can complete remove that? In the standard Windows 8 (not 8.1) that was possible? But 8.1?
View 2 Replies
View Related
Aug 31, 2014
Message from device manager:
Windows encountered a problem installing the driver software for your device.
Windows found driver software for your device but encountered an error while attempting to install it.
NVIDIA GeForce GT 750M
Message from NVIDIA Installer:
NVIDIA Installer failed.
Graphics Driver 340.52 Failed.
Description:After my pc freezed all of sudden while running emulators (i also had an auto windows update few hours earlier), windows refuse to detect my GPU and NVIDIA installer keep failing...Luckily i have two GPU but i cannot use the NVIDIA one due to this issue.
ASUS Tech Support Little talk with ASUS Support and they asked if i had a critical windows update recently.They asked me to try a system restore, which seem to solve the issue (i could see the GPU card but only for some minutes).Now after that i being asked to format the pc.
View 2 Replies
View Related
May 27, 2014
I think I know what "Bluetooth" is, and since I didn't think I needed it, I disabled it in Device Manager. Also, uninstalled it in Add & Remove programs. But I just ran the 'reliability monitor' / view reliability history, and saw all the "successful" installations of "Bluetooth". There were "nine" listings. More then I removed.
I have been checking what works and doesn't work to speed up and improve performance of my computer. And the plan is very much working. The computer is working great, with average boot times under 40 seconds, and my Firefox browser is 'flying'. Since I am adding some more memory in a day or two, I'm trying to see what works and do a 'reformat', complete reinstallation of the system. Setting up everything the way I want it. "Right" the first time if you will, and then be done with any testing and just using the computer.
Anyway, obviously, I'm not touching "Bluetooth". But what is it, and why does windows 8.1 think I need it. I don't have any wireless stuff, if that's what its for. And I just assumed that if I ever did need 'wireless', I would just download something.
Dell Inspiron 3647 computer, 3GHz, 4 gig's memory, all windows updates, windows 8.1.
View 8 Replies
View Related
Mar 8, 2014
When I click on Device Manager from the Control panel it freezes.
View 3 Replies
View Related
Feb 8, 2014
Last part of the message, (Device Descriptor Request Failed). I get this, in Device Manager, and I have searched for an answer on the net. Also it is a Code 43. I went through my laptop, with an HP Technician this morning, I might add at a cost of 5p/minute, for 30 odd minutes. He has said that because I had gone over to Windows 8.1 and the recovery discs I made will not load, to put back in Windows 8. I have to send the laptop back for re-installing the OS, because Windows 8.1 do not have the update for my problem. Also the R.H. USB socket has a failure ID:0GAPTK-6T7716-MFPWWK-8D1Q03. I personally think that this is all what the problem is. a duff USB. Is this a cop-out???
Does Windows 8.1 having driver WHQL problems?
I only found out the problem with the usb when I tried to download a Mobi file to a Kindle for my wife. The other usb's work OK.
View 9 Replies
View Related
Jul 25, 2013
What is happening on the pc ? Btw it webcam is not functioning from yesterday. It asked me to connect to a camera.
View 2 Replies
View Related
Aug 27, 2014
I tried everything I know but can't seem to get back my wifi card to work.
View 9 Replies
View Related
Jan 26, 2014
My Windows 8.1 box keeps crashing in device manager upon any "refresh." For example, scanning for hardware changes, installing/uninstalling something, or updating anything. I've gone through and updated any drivers that I saw were old, but no joy. Uploading the SF Diag output as well.
View 9 Replies
View Related
Jun 24, 2014
I can open device manager, but whenever I try any function, search for new hardware, update drivers, disable device, etc, device manager crashes with the error "Microsoft Management Console Has Stopped Working." Other Management console programs work fine (event viewer, performance monitor).
I've run sfc /scannow half a dozen times. I've run it from a clean boot, I've run it 3 times in a row, I've run it, restarted, and then run it again. No errors found.
Faulting application name: mmc.exe, version: 6.3.9600.16384, time stamp: 0x5215ef8f
Faulting module name: devmgr.dll, version: 6.3.9600.16384, time stamp: 0x5215ebc8
Exception code: 0xc00000fd
Fault offset: 0x000000000000e3a2
Faulting process id: 0x1a8c
[Code] ......
View 5 Replies
View Related
Sep 15, 2014
Ive just done a clean installation of Windows 8. I checked device manager straight away. There was a listing under Other Devices with an exclamation mark listed only as "Media". Ive never seen that before so I havent a clue what it referred to. When I clicked on its properties it said Internal High Definition Audi Bus. Was this a serious issue..maybe a corrupted installation?
I wasn't sure what to do but because I had installed from Windows CD and not factory image I had to go to the Dell site and then install the Intel Chipset software. I then rebooted. The Media icon and exclamation error then disappeared from Device Manager.
Was it the Reboot of my PC that got rid of it or was it the Intel Chipset software being installed that sorted it out? Also what is "Media" referring to or is it just a generic term? Also, Im always confused as to what is the difference between an exclamation mark and the blue question mark on a white background in Device Manager which Ive seen before too?
View 3 Replies
View Related
Jun 8, 2013
I have recently bought an Acer S670MG or M679G desktop computer with the following specs.
Intel core 2 due 3.1ghz. 6mb L2 cache.
6gb ddr3 ram at 1066mhz bus
Nvidia Geforce 9800GT 512mb/256bits external graphic card.
1tb SATA WD hdd.
And I have facing a problem that when I turned ON computer it sounds a beep and Acer Empowering People appears a couple of seconds then display is gone. then after coupe of seconds, again beeps sounds and again Acer logo appears and then starts the windows. Why this happens. because of that booting time is much longer.
In bios. I tried two hard drive modes. native ide and Raid. third is AHCI I think and this I did not try yet.
View 6 Replies
View Related
Jan 12, 2014
Windows 8.1 Pro.
The icon of "Safely Remove Hardware and Eject Media" appears even when i not have any devices plugged in.
And if i click it it shows below the "Open Devices and Printers" an item with text "..." which is disabled..
View 7 Replies
View Related
Jan 17, 2014
I am unsure whether I should enable "Automatically get device drivers, apps, and info for new devices" when installing Windows 8 Pro?
What exactly will it do?
If I enable this, will Windows then automatically install software packages/drivers from the manufacturer, like for example the Logitech Setpoint software for their keyboards and mouse and similar software for other devices? I don't want or need that. Or will it behave like in Windows 7?
On my other PC with Windows 7 I see in Windows Update that there are a couple of optional updates, including that Logitech stuff, as well as some driver for a BenQ monitor I have and also nvidia video drivers. This kind of stuff I don't want or need installed automatically as important updates in Windows Update - so I am worried if enabling this automatic driver stuff in Windows 8 is different than Windows 7? Meaning that it will get installed secretly/automatically?
However, it's fine that Windows finds them so I can manually go and check if I want to install any of it.
The key is that the updates are optional in Windows 7, but I have seen a few people complain about Windows 8 installing stuff like video drivers and mouse drivers automatically.
View 2 Replies
View Related
Sep 15, 2014
I'm running a custom build PC on which I clean installed a (legal) copy of Windows 8.1
My system works fine except it can not install drivers for ANYTHING non-standard. Keyboard, mouse, memory sticks, HDDs all work fine, however when I plug in my phone/tablet/camera etc via USB, it fails to install drivers and I can't use my device.
Here's what device manager looks like with my (android) phone plugged in
And when I select Update driver software, I get this error:
View 9 Replies
View Related
Apr 30, 2014
OK, it seems like I'm part of the vast conspiracy to not have 8.1 connect to the internet. Here is what's going on;
Wifi indicator shows "!" and reads "limited".
When I open the browser and click to diagnose the issue it runs through and ends with a message saying the default gateway has been fixed. About every fifth time it'll give me "The connection between your access point, router, or cable modem and the internet is broken." This computer works fine when plugged directly into the Ethernet cable from the router. Every other device on the router (other pc, xbox) work fine.
- Brand new Toshiba E55-A5114 with 8.1
- Performed all Windows updates, driver updates, then Toshiba updates
- I have power cycled both router then modem, and modem then router
- I have updated the driver for my network adapter Intel(R) Dual Band Wireless AC 7260
- I have disabled/enabled, uninstalled/installed the driver thru the Device Manager
- In CMD I have flushdns, netsh winsock reset
- Made sure the power management box is unchecked
- Here is the ipconfig :
Microsoft Windows [Version 6.3.9600]
(c) 2013 Microsoft Corporation. All rights reserved.
C:Windowssystem32>ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : PC
[Code] ....
View 9 Replies
View Related