Windows 8.1 Pro.
The icon of "Safely Remove Hardware and Eject Media" appears even when i not have any devices plugged in.
And if i click it it shows below the "Open Devices and Printers" an item with text "..." which is disabled..
Up until today, whenever I had a USB flash drive connected and I wanted to remove it I would click the icon in the System tray for "Safely remove hardware and eject media" and then my drive letter would be shown and I'd click on it to safely remove it. I am running Windows 8.1 and today when I click on the icon to remove the USB flash, all I see are three dots which do nothing. Above the 3 dots ... is the normal Open Devices and Printers. how to get the drive letters to appear instead of the 3 dots?
View 2 Replies View RelatedSo every once in a while when I boot up there is a work group icon on the desktop which I cannot delete. The only way I can remove the icon is to reboot. What is the icon coming up for and is there a way to remove the icon?
View 9 Replies View RelatedMy friend happened to look in Devices and Printers, and in the Multimedia Devices section he had about 10 devices showing up that he never heard of. Six of them were computers with names that he had never heard of, the others were devices that we could not tell what they were.
I expect that these entries mean that at some time they were on the same network that he was on. Would that be correct?
If so, then it is a matter for concern because he never goes on public networks. He only goes on his network at home, and a network in a small office that he rents and shares with one other person. They have their own router with security set up on it, and that router is connected to an Ethernet jack that most likely goes to a switch on a network that also provides internet service to some other offices in the same building.
This computer is only about 2 months old, so these entries can't be too old.
When I looked at his computer, he was on his home network and all those other devices showed as Offline. I right clicked on them all and removed them. Would it be a good guess that perhaps the security of the network at his office was compromised, and those devices were connected to that network at some point?
I told him to monitor and see when they reappear, but he won't be back in that office for 2 weeks.
I am using Windows 8.
I am facing an issue with my sound all on a sudden. The volume icon on the task bar has a red cross on it. When I hover on that it says 'No speakers or headphones plugged in' (attachment-1).
When I click on the icon I get a screen like attachment-2 which says 'The peripheral does not appear to be plugged in'.
I checked in the Device Manager to see only 'Bluetooth Headset' listed under 'Sound,video and game controllers'. Also I tried to re-install audio drivers (Real Tech High Definition Audio Driver) which is provided with the laptop to no avail. I don't know whether this is just a driver/windows problem or a hardware problem.
PC : Compaq Presario CQ3623L
OS : Windows 8 Pro x64
Problem : Cannot Eject any Portable Hard Drive with Safely Remove Hardware Window. My Portable HD didn't show on Safely Remove Hardware windows, so I cant eject them.
I am running Win 8.1 Pro x64. Today I noticed that the "Eject" option from the right-click menu doesn't work for either of my 2 CD-Rom drives, nor for a "virtual" drive - I get the same error message on all 3: "An error occured while ejecting [drive]".
Device Manager shows no errors, and I've tried uninstalling the drives and rebooting, but error persists.
Also, to be clear, it is NOT a physical problem with the drives, as I can open them without a problem through the buttons on the front.
Finally, if for some reason I can't fix this issue, any way to at least just DELETE the "Eject" from the context menu?
I have recently bought an Acer S670MG or M679G desktop computer with the following specs.
Intel core 2 due 3.1ghz. 6mb L2 cache.
6gb ddr3 ram at 1066mhz bus
Nvidia Geforce 9800GT 512mb/256bits external graphic card.
1tb SATA WD hdd.
And I have facing a problem that when I turned ON computer it sounds a beep and Acer Empowering People appears a couple of seconds then display is gone. then after coupe of seconds, again beeps sounds and again Acer logo appears and then starts the windows. Why this happens. because of that booting time is much longer.
In bios. I tried two hard drive modes. native ide and Raid. third is AHCI I think and this I did not try yet.
I cannot get the scanning component of my new printer to work. The "scanner" appears in device manager but has an error (yellow exclamation), it seems that the installation of the scanner network driver fails every time I try to install it. The printer prints fine just will not scan. I have it wirelessly installed and am using Windows 8.1 currently.
How to get it works as I am totally out of ideas after numerous uninstall and reinstalls.
I have a dual boot system with Win 7 and a Win 8.1 and all works well. I am using two SSD's with Win 8 and the other with Win 7. Asus Maximus v Gene, i5 3570k and 16 gb ram.
When I boot into Win 7 with an additional internal hdd plugged into a mob SATA port all is ok. However, when I attempt to boot into Win 8 I only get to the moving circle and won 't go any further. If I unplug the hdd the computer boots fine into Win 8.1.
The hdd is set to active and shows up ok in Disk Manager (Win 7).
I have recently bough a new PC. Now that everything is put together and installed I am facing only ONE problem.
I own an Adata Nobility NH13 External HDD which is USB 3.0. When I plug it into any USB3.0 port using a USB3.0 cable, the drive does not show up in My Computer, nor in Device manager, regardless if I use the Front or Rear USB3.0 ports.
The USB2 ports work just fine with it but what is the point in having a USB3.0 device if you don't use it the way you should ... If I plug in USB2 devices in the USB3.0 ports the work great, and even if I connect the ExtHDD with a USB2 cable it does work.
Now, the first thing you would think is that the USB3.0 drivers are missing but in the Device manager, unser USB controllers, there is a Intel(R) USB 3.0 eXtensible Host Controller-0100(Microsoft).
My TV tuner gets full signal when working with the battery while it gets null signal when plugged in to the AC socket whenever the battery is in. The matter is related I think to the battery saving profile. I have an ASUS K75V with i7 - 36300QM, 2.4GHz. OS Windows 8. I tried to set the setting of the active profile equal for "on battery" and "plugged in", copying the settings of the first to the second naturally. It still doesn't work. It seems that is not configurable.
Passing from working (on battery):
Process C:Program FilesASUSP4GBatteryLife.exe (process ID:2560) reset policy scheme from {512a6ac6-efc1-4441-85c9-cccf29b69cd2} to {df011ed9-9131-49b9-8090-46963cfb65ce}
To not working (plugged in):
Process C:Program FilesASUSP4GBatteryLife.exe (process ID:2560) reset policy scheme from {df011ed9-9131-49b9-8090-46963cfb65ce} to {512a6ac6-efc1-4441-85c9-cccf29b69cd2}
My usb ports do not recognize some devices. Sometimes when I plug one device another one is unplugged., some times a specific usb port works, sometimes it doesn't. eg: when i unplug the mouse nw and plug it again it will stop working. if i plug another device eon a different usb port the mouse is disconnected. I went to control panel devices Manger and uninstalled every usb port and enable it again with no results.
View 2 Replies View RelatedMy power efficiency report is telling me that none of my USB hubs and devices are entering selective suspend.
View 1 Replies View RelatedI have recently purchased a new HP Officejet Pro 8620 and am currently having problems actually using it.
I have already installed the full-feature driver from the HP website but the printer does not appear in devices and printers. However my printer does appear in print dialog and the device manager. I have tried adding the printer through devices and printers but it has no effect.
When I try to print anything through print dialog or any application for that matter no print job is sent. Basically I can't print anything from my computer now.
I have already re-installed the driver multiple times only to come up with similar results. This is for my main computer which is a HP Envy dv7. Also I have connected to the printer via the wireless router option.
However for my second computer which is a Dell XPS 12 everything worked fine right from the start which also connected to the printer wirelessly.
I have a weird issue in which after a boot of the machine it will take some time for USB devices to become initialized, yes... this includes my USB keyboard and mouse. So essentially even though the system may be up and running at the user logon screen, I have to wait five seconds until I can type my password in on my USB connected keyboard.
View 3 Replies View RelatedI am having problems with USB 3 devices disconnecting and reconnecting all the time when they are plugged into the Esata ports on the back of the motherboard in my sig. The USB 3 devices work ok in the normal USB 2 and 3 ports on the motherboard but I am not sure why they are not working in the Esata ports? I'm running Windows 8.1 with all the latest drivers and I am also running the BIOS f7e provided by Gigabyte to see if this would resolve the issue but it's not worked. If I connect USB 2 devices to the Esata ports they work ok, but could they possibly be faulty as they are not working correctly with USB3 devices?
View 4 Replies View RelatedWhenever I try to connect my flash drive, phone or digi cams. It can't detect anything then I saw this in device manager, is this the culprit?
View 1 Replies View RelatedI have recently built a new computer and installed Windows 8. All was running fine (including USB devices such as iPhone, flash drive etc), however since upgrading to Windows 8.1, none of my USB devices are showing up at all. Oddly, the mouse and keyboard still work.
When I go into the BIOS, all my devices (iPhone, Flash drive, keyboard and mouse etc) all show up in there, so I'm guessing it's a driver/Windows 8.1 issue that I'm missing?
I have been to the ASUS website and downloaded all the drivers I can find, but still no luck.
My motherboard is an "Asus Z97 Pro". I have tried contacting Asus support, but they are completely useless!
I'm having an issue where if my USB devices are plugged in when i start my computer they are fine. but if i try to plug in a thumbdrive after it's already been turned on it won't recognize it. nothing.
Just Ran the SFC /scannow and i don't know what to make of it. it is attach The Attached file has the SFC details. not sure what to make of it.
Running
Windows 8.1 x64
Gygabyte: z68a-d3h-b3
(will attach more if needed.)
New printers do not display in Windows 8.1 Devices and Printers (no icon):
New Dell, clean install:
- Reinstalled Dell Factory Image
- Updated to Windows 8.1
- Installed Office 2013
- Added BUILT-IN Windows Driver for LaserJet 5P/5MP
- Added Epson driver for Windows 8 64 bit from Epson website
Neither printer shows in Devices and Printers.
Rebooted. Stopped and started print spooler. Checked registry and all printers, including the new ones, appear to be listed in all the correct registry areas.
Open Notepad, select Print, both printers are listed.
Both printers print. When in Notepad, select Print, I can right click on the printer, select properties, and control the printer, print test pages, change drivers and preferences, etc.
The ONLY PROBLEM is the printers do not show in Devices and Printers, so I cannot control them from there.
I have a Dell Inspiron 660 PC w/windows 8.1 no matter what I plug into the usb port I cannot find it on my computer. I hear the connect/disconnect sound, but can't find anything on the computer as to where it is at or how to open it. The device is a storage device with photos. It also does the same thing with my phone. I hear it, but nothing opens or comes up anywhere.
View 3 Replies View RelatedWhen I go toControl Panel -> Hardware and Sound -> Devices and Printersit can take 5 minutes or more to populate the window. A green bar slowly progressing along the top.
Sometimes (not always) when I click on the Network icon it shows an empty window, taking five or more minutes, also with a green bar slowly progressing along the top. EDIT: After I submitted this post I saw that the network window had finally populated. Still, it was incredibly slow and happened after the window showed a message saying "This folder is empty."
If I go to This PC that comes up almost instantly, including the mapped network drives.
I have an iomega portable usb drive. I can plug into any of my windows 7 machines and access the files and store data on it. when I put into my win 8 machine it shows in devices and printers and in my computer shows as removable disk but you cannot open it up.
I have went into device manager and tried to update the usb driver installed but no use at all.
really strange that it shows in devices and printers but I cannot get the files.
the thing is I need to install and transfer some backups onto my win 8 machine so I need it to work desperately.
After upgrading to 8.1 all of my previously listed devices are no longer listed under devices... in fact there are no devices listed. I can also not add a device. If I look in device manager they are listed there and if I go to print the printer shows up and I can print. The screenshot below shows what I see when I open "Devices and Printers" in control panel. The biggest issue is not being able to add devices like Bluetooth speaker.
View 6 Replies View RelatedI have run into a problem with my Windows 8 computer once in a while, it's that my PC doesn't recognize USB ported devices as supposed to, but it does recognize things such as a wireless mouse and keyboard. Now, my question is, can I buy a wired Xbox 360 controller and connect it to my computer, and trust it to download the drivers correctly, and work like it's supposed to? I have got a new game, and really want the controller to work for it.
View 2 Replies View RelatedMy observation on using a couple of USB3 small passport 2TB self powered disk drives when I connect then to a powered standard usb2 hub is that they perform FAR FASTER than external USB 2 disk drives --especially the self powered small pocket size one's.
So if you are buying external drives --even if you don't have USB3 ports on your machine it's still worth going for the USB 3 drive.
My friend happened to look in Devices and Printers, and in the Multimedia Devices section he had about 10 devices showing up that he never heard of. Six of them were computers with names that he had never heard of, the others were devices that we could not tell what they were.
I expect that these entries mean that at some time they were on the same network that he was on. Would that be correct?
If so, then it is a matter for concern because he never goes on public networks. He only goes on his network at home, and a network in a small office that he rents and shares with one other person. They have their own router with security set up on it, and that router is connected to an Ethernet jack that most likely goes to a switch on a network that also provides internet service to some other offices in the same building.
This computer is only about 2 months old, so these entries can't be too old.
When I looked at his computer, he was on his home network and all those other devices showed as Offline. I right clicked on them all and removed them. Would it be a good guess that perhaps the security of the network at his office was compromised, and those devices were connected to that network at some point?
I told him to monitor and see when they reappear, but he won't be back in that office for 2 weeks.
I recently switched my pc from 2 AMD cards to 2 Nvidia cards, when i was preparing to install the 2 cards, i shut down my computer, during the shutdown it asked me to update and shutdown win 8 which i did. ever since i did that my audio devices are not detecting.. nothing i do is working.
When i use my plug and play speakers, they are not recognized... let me rephrase.. in the playback devices menu they show up as "Speakers" as they always have, then quickly disappear, then show up again, then disappear again, then back and forth over and over and over again..... i tried uninstalling my audio drivers and reinstalling. this did not work. i can get sound with the speakers, by just pluggin them into my TV, but i cant control the audio or the 5.1 surround from the tv, it just shows them as stereo...
Asus Sabretooh 990 fx R2
AMD 4.3 vishera FX 8 core
GTX 780Ti (primary)
GTX 480 Superclocked (dedicated physx)
850 modular psu
16GB GDDR3 g.skill
i never had this problem until A) new cards, and B) installed the win 8 update... But i rolled my computer back to a date before that update, and then turned updates off in case that was it..
i've also tried installing drivers directly from realtek, directly from my motherboard website. i've uninstalled and reinstalled, and stopped windows from auto installing during my realtek installs on the drivers...
just cant figure out why it flickers like that, the speakers work fine in other devices (e.g the tv).
Here is a screenshot of when i try to download drivers, i get an error 0xE0000247....
And a pic of my device manger
Every time I plugin a device (Memory card, Cell phone etc.) Windows 8.1 automatically opens Devices and Printers which is very annoying. I set Autoplay to "Take no action" but in vain. How can I disable this behavior?
View 9 Replies View RelatedI have been several problems for a while since I installed Windows 8.
Firstly my screen and WiFi randomly stop working (at different times).
The screen goes blank (black) and it won't do anything (even caps lock) so I think it's completely frozen. Usually I hard reset, but today I got distracted and it eventually came back. No event logs or anything.
With the wifi, it says it can't detect any networks (red cross icon) and again the only fix is a hard reset, reinstalling drivers doesn't work.
Finally, recently my fingerprint scanner wouldn't let me log in. It says in biometric devices that it's unavailable, but none of the explanations applicable. I tried deleting my metrics and reinstalling but nothing...
I have an HP pavilion tx2 1250ea but I had to replace the motherboard and it's a 1050 or something, but obviously it's compatible.