Hardware Drivers :: Safely Remove Hardware And Eject Media Only Shows 3 Dots?
Apr 16, 2014
Up until today, whenever I had a USB flash drive connected and I wanted to remove it I would click the icon in the System tray for "Safely remove hardware and eject media" and then my drive letter would be shown and I'd click on it to safely remove it. I am running Windows 8.1 and today when I click on the icon to remove the USB flash, all I see are three dots which do nothing. Above the 3 dots ... is the normal Open Devices and Printers. how to get the drive letters to appear instead of the 3 dots?
I'm unable to 'Safely remove' or 'Eject' external USB 3.0 drives (I have 2) on my Lenovo Thinkpad running Wndows 8.1 without having the computer claim that the drive needs to be scanned for errors when the drive is reconnected to the same laptop or attached to my desktop PC's.
When I connect the same drives to my desktop PC's USB3 ports I initially get the same "scan for errors" prompt. But any further attaching and removal of the same drives to either my Windows 7(64) and Vista (64) dsktop PCs's does not reproduce the same error and further safe removal and reconnecting to those 2 systems is error free.
When scanned for errors there has never been any errors discovered. The 2.5" drives (one Seagate the other WD) are in Vantec USB 3.0 external enclosures that use a '2x USB plugs' cable; one for data and one for power. My usual removal method is to click on the 'Windows Explorer Safely Remove Hardware and Eject Media' icon on the Taskbar and select Eject for the drive and then wait until the 'Safe to remove' message pops up before removing the single cable attached to the external enclosure.
The USB Controllers are:
Intel(R) Series/C216 Chipset Family USB Enhanced Host Coltroller - 1E26 Intel(R) Series/C216 Chipset Family USB Enhanced Host Coltroller - 1E2D Intel(R) USB 3.0 eXtensible Host Controller - 0100 (Microsoft)
I unsuccessfully tried updating the Intel(R) Series/C216 Chipset controller to v9.4.0.126 but it's still at v9.3.0.1011.
If it's a USB 3.0 driver/firmware related, or a 'feature' of Windows 8.1?
I can live with the problem as I'm sure that the drive is not being removed while data is being written, and Indexing is disabled on external drives. But I prefer using a computer that does not exhibit these sort of problems.
My Samsung Netbook has developed the below glitch in the screen ever since it fell off:-
Is that some problem with the display device gone loose or something?
I took a snapshot via PrtScn of the Netbook and viewed it in my desktop, it was clean without the spots as seen in the above image. Does that imply it's a issue with the Netbook screen?
Is there any software to check if the devices in the Netbook are still functioning properly or not? In case there is no single software to achieve that, you can suggest me individual software say to check graphics device, hard drive etc.
Problem : Cannot Eject any Portable Hard Drive with Safely Remove Hardware Window. My Portable HD didn't show on Safely Remove Hardware windows, so I cant eject them.
I am running Win 8.1 Pro x64. Today I noticed that the "Eject" option from the right-click menu doesn't work for either of my 2 CD-Rom drives, nor for a "virtual" drive - I get the same error message on all 3: "An error occured while ejecting [drive]".
Device Manager shows no errors, and I've tried uninstalling the drives and rebooting, but error persists.
Also, to be clear, it is NOT a physical problem with the drives, as I can open them without a problem through the buttons on the front.
Finally, if for some reason I can't fix this issue, any way to at least just DELETE the "Eject" from the context menu?
This PC - Add or Remove "Folders" in Windows 8.1 It's work for me. And i wanna remove media icon in navigation pane.I use right click but after restart its appear. How I can do?
I just don't want to use Windows Media player. It is not even there on my pc I guess.
Still, several of my file associations are showing windows media player as associated with it.
When I go to control panel - default program, and untick associations for wmp, then don't stick. unticking them doesn't work, they reappear the next time.
I also have foobar2000, winamp, vlcplayer installed, I have put default for these programs.
However, all the extensions associated with wmp do not appear in the list of extension for these three programs, so I am not able to set them.
I just don't want to use wmp. I want those extensions to remain unassociated with any program, so that when and if I ever player any file with that extension, windows should ask me how to open that, and then I can select .
How to remove wmp associations from all extensions listed there, even without associating it with another program.
I'm unable to print on my Xerox WorkCentre PE220. Win 8 installed the driver properly and did not show any errors or red flags during and after the installation. When I print a window shows up saying error cannot print.
On a relative's HP laptop running Windows 8, she had a problem where burned CD-R audio discs showed up as empty and wouldn't play, no matter what program you used. This was odd, because it's the SAME CD-ROM DRIVE that was used to burn them. Immediately I suspected some kind of driver issue, so I uninstalled the default driver and then rebooted. When Windows automatically reconfigured/loaded the CD-ROM drive, the PC was finally able to see and use the media that had been burned on its own CD/DVD drive. Launching WMP resulted in music being played.
However... I'm still seeing an issue that has me perplexed. When looking at an audio CD-R or commercial audio CD in the DVD/CD-ROM drive, it always shows as containing 0 bytes. You can still see the track ".cda" files listed, which individually show a minimum of 1K size in the file listing display. Oddly, checking those files individually actually results in 2K shown for the details. I completely understand why 0 bytes free would show because the CD was finalized, but shouldn't the amount of bytes occupied by audio media show up with a particular byte count?
I have an iomega portable usb drive. I can plug into any of my windows 7 machines and access the files and store data on it. when I put into my win 8 machine it shows in devices and printers and in my computer shows as removable disk but you cannot open it up.
I have went into device manager and tried to update the usb driver installed but no use at all.
really strange that it shows in devices and printers but I cannot get the files.
the thing is I need to install and transfer some backups onto my win 8 machine so I need it to work desperately.
I can pair my Galaxy S3 with my laptop but when it does the status in devices shows offline. I can't seem to get past that. My S3 connects fine with my Jambox, so I know it can connect.
This is what Windows Explorer and Disk Management show.
Drives G, H, I, and L are completely non-existent. When clicking on them, Windows asks to format them. Properties shows 0 bytes Used space/Free space. I need removing these "drives" from Windows Explorer.
And sometimes, it takes a good 30 seconds after Windows 8.1 log in screen for me to be able to use USB devices. I say USB devices, but what I really need is my keyboard and mouse. Neither work.
Over the last couple days, I built a new PC and installed windows 8.1. Initially I had some issues installing windows, so I unplugged all my drives except the SSD and DVD. I installed windows to my SSD.
Everything works great!
Now I started adding my drives back in 1 at a time. When I plugged my 2nd SSD in, it showed up in BIOS, but not in Disk Management or Device Manager. So I booted back into the install CD, it showed up in the disk manager there. Since this was also a blank SSD, I partitioned and formated the drive from the install CD, then exited the installer and booted back to my windows drive.
I have 2 SSD drives working great!
Now to add my 2TB HDD... Same issue, it shows up in BIOS and the install disc, but not in Disk Management or Device Manager. This drive does not have a boot partition on it, however, it does have two existing data partitions. They were made from my previous windows 7 system and the option to delete these partitions is grayed out in the install disc menu. I also have some data that I would like to keep on it. I have a USB dock that I can use to read the contents of the disk just fine. Everything is there and in working order.
What is different about Windows 8.1 that is preventing my hard drives from showing up in windows proper? I am reading things about UEFI online, but nothing seems to fit my exact scenario. I will try and post some screen shots when I get back at it.
I have two wifi adapters i have been trying to get to work consistently with no luck for several days now. One had been working fine for a few weeks, then it stopped, i tried switching, and that one worked for half a day, then it stopped. Once it stops working the connection is 'limited' but works fine on other machines, or it says it is connected in settings but Chrome says it isn't online. So i wanted to try to install a different driver, having read that this can often be the solution.
But in both cases, there is no old driver to roll back to, and when i try to tell Windows to load a driver i've downloaded or have on a disc, it says, no, the one it already has is 'up to date', and it won't do it. Is there some way to dig around in the system to get rid of the driver it claims is better so i can try another one?
I installed Windows 8 on my laptop like 5 days ago, everyone worked fine and dandy there but somehow now most of my programs won't launch but i can see it in Task Manager, my DVD drive won't open when i try to eject it physically, when i try to right click and eject it in My Computer, it freezes immediately and doesn't recover so i'd have to end it via TM.
But this is what i don't understand, after i put my Laptop to sleep by pressing briefly on the power button, when i turn it on again, the DVD drive then opens after the long time i tried to open in while using Windows, i then login and the program.s that wouldn't open like Origin and iTunes would be opened after logon..
Windows Media Player also freezes when i use it to open music files and play as it is the default player, sometimes it plays the music but it won't let me pause or change volume, sometimes i won't play at all and it'd just freeze..
And sometimes when i try to restart, the system hangs and won't actually restart leaving me to hold down and press the power button to shut-down the system. I'm almost regretting upgrading to Windows 8..
I was trying to remove my BT headset from BT devices and now its stuck on "removing device"... won't remove...won't even let me connect the headset now :/ even tried removing them from device manager, after a the device appears again :/
I recently have been having this issue where whenever I use the media keys (play, pause, rewind, and forward) and the volume keys on my quickfire pro it just refreshes my browser window. This has been happening recently and is very annoying.
I was having the issue where windows 8 randomly disconnects bluetooth devices, so i tried to remove then reinstall it. When trying to remove, after a while, it comes up with a message saying "Unable to remove device".
So I go straight to device manager and uninstall my mouse from there. it works. I go back to the windows 8 show bluetooth devices menu and the mouse is still there. I hit remove and it works.
Now when i restart my computer its BACK in both device manager and bluetooth device menu. I just want it off and gone.
I installed my fresh Windows 8.1 Enterprise 64 bits (build 9600), on my Acer V3-571G laptop.
When I go to device manager, and I want uninstall this driver.
--> Imaging devices
--> and Bluetooth,
When I Disable and Uninstall them, then, it's seems te drivers are gone! But when I restarts mine Laptop, the Imaging devices and bluetooth, comes back?
How I can complete remove that? In the standard Windows 8 (not 8.1) that was possible? But 8.1?
