Hardware Drivers :: Dots In Netbook Screen?
Dec 21, 2013
My Samsung Netbook has developed the below glitch in the screen ever since it fell off:-
Is that some problem with the display device gone loose or something?
I took a snapshot via PrtScn of the Netbook and viewed it in my desktop, it was clean without the spots as seen in the above image. Does that imply it's a issue with the Netbook screen?
Is there any software to check if the devices in the Netbook are still functioning properly or not? In case there is no single software to achieve that, you can suggest me individual software say to check graphics device, hard drive etc.
View 6 Replies
ADVERTISEMENT
May 25, 2013
I cannot get my computer to boot. It stays at the screen with the ASUS logo and a circle of dots?
View 6 Replies
View Related
Nov 3, 2013
I just wondering but it is the second time my netbook has done this (in less than 4 months) but I have had to restart 2 times because of disk errors. Does this mean that my HDD is dying...
View 9 Replies
View Related
Apr 16, 2014
Up until today, whenever I had a USB flash drive connected and I wanted to remove it I would click the icon in the System tray for "Safely remove hardware and eject media" and then my drive letter would be shown and I'd click on it to safely remove it. I am running Windows 8.1 and today when I click on the icon to remove the USB flash, all I see are three dots which do nothing. Above the 3 dots ... is the normal Open Devices and Printers. how to get the drive letters to appear instead of the 3 dots?
View 2 Replies
View Related
Mar 12, 2013
Attempted to install my 2002 XP Standard for Students and Teachers on my new Netbook. (It's an Office program.) I had already installed it on my Vista Desktop and my laptop Win 7 with no issues at all.
When I try to install it on my Netbook, I continue to get an error message about the - Err 25003Installation Source has been corrupted.
I've googled this error and there are plenty. But nothing works and I can NOT get this program installed.
View 5 Replies
View Related
Jun 10, 2013
My friend's sister installed Windows 8 twice, and it installed successfully both times. When I start the Netbook it gives me an option to choose between one of the two installs. I'd like to delete one of the installations but I'm not sure how to do so.
View 4 Replies
View Related
Aug 3, 2012
it installs without a hitch, comes up, runs fine ... just don't try running any Metro apps because most of them won't work - the screen resolution I have is something like 1024 x 600 (fine for this device) but that's too small for most apps. The desktop is fine but virtually nothing else can be run outside that.
I like my little netbook but Windows 8 doesn't. I made an image of that drive becuase I'll be restoring that soon.
View 4 Replies
View Related
Jul 23, 2014
Upgrading Netbook, with an SSD, so naturally I made sure I let him know beforehand that an SSD was not going to perform as advertised on his Netbook given that it only has a SATA 2 (3Gb/s) interface and a pretty low end Intel Atom based CPU.
The SSD is a Crucial MX100 128GB.
So... Is there a software I need to be running in order to get the most out of Crucial SSD's?, I'm running a Plextor SSD on my main gaming rig and it runs absolutely beastly without any software, etc.
I made sure I changed the SATA Mode to ACHI before installing Windows 8.1.
Also, I did not install any Intel Chipset drivers or anything on the Netbook given how old it is, Windows should have the latest drivers for it (I did run Windows Update).
View 3 Replies
View Related
Sep 8, 2013
I have a wireless keyboard and mouse (combo) plugged into my netbook (acer aspire one 522) and can't get the netbook to wake from sleep mode with either of them when the lid is closed (i always keep it closed other than this for this workaround).
I had set the power options to 'do nothing' when the lid is closed (only for when it's plugged in), and when i try to wake from sleep, the power and WLAN lights on the netbook flash whenever i move the mouse or press keys but nothing else. i have to open the lid, then press a key to wake from sleep, then i close the lid again. i checked Power Management settings for both keyboard and mouse and they both have the check box ticked for 'Allow this device to wake the computer'.
View 9 Replies
View Related
Jan 11, 2014
Totally new to W8, why I cannot simply transfer video from my W7 Samsung laptop to my W8 HP Touchscreen 11.6 netbook? Picture, docs, all okay, but with video it will transfer the sound but not the picture.
View 7 Replies
View Related
Dec 28, 2011
I installed Windows 8 on my little aspire one netbook.. it runs amazing.. only problem is the metro apps will not open... and the reason is the screen resolution.. is there any way around this? If not is there a way to roll back to my old windows xp?
View 3 Replies
View Related
Jul 14, 2014
I have recently installed windows updates and after restart the black screen occurred after I typed my password. About five days before that I have reinstalled my Mobile Intel 4 series driver and now in Device manager it shows 3 grayed out monitors which were installed when I have reinstalled the Video driver. The monitor driver that Is currently loaded was installed when I installed the OS itself.
View 9 Replies
View Related
Jan 3, 2014
I just bought a Microsoft wireless mouse for my ASUS notebook as I have it connected to my tv via hdmi and wanted to be able to browse the net and control other things from my sofa rather than sitting on the floor! (as the hd cable is v short)
If Im using the mouse, how would I get the onscreen keyboard to stay onscreen so I can type? my laptop is touchscreen and the keyboard only pops up when I tap the screen....
View 4 Replies
View Related
Jun 7, 2014
Well I've had my laptop for almost 5 months now, however I did break it and got a screen replacement yesterday. Ever since then my screen seems dim. I've altered all the settings (as explained on other threads) but I still can't get to the centre of the problem. I had no trouble altering my brightness before my screen replacement so I do presume that the screen that the shop fitted wasn't the correct one and therefore a cheap option.
View 2 Replies
View Related
Oct 18, 2013
I went and bought a new laptop since my old one was starting to die on me and stuff. It's a Samsung ATIV Book 4, and it's really nice. This is the first hick up I've had with it so far, and I noticed it happening today. I noticed my screen was really dim today as I was using it, so naturally, I use the Fn key to turn it up, but nothing happens. Up in the top left of the screen, it shows a little brightness meter going up and down as I turn it up and down, but nothing changes. I went to the power options menu and tried to adjust it there, and alas, nothing happened. I even tried disabling the display driver and restarting it, but that didn't do anything.
View 9 Replies
View Related
Aug 7, 2014
I was installing the AMD beta driver and suddenly, black screen. It somehow restarted and I logged in, but I saw a black screen and after a few seconds, I was thrown back to the login screen. It was the same in safe mode! is there any way to uninstall the driver without a complete wipe? I don't want to start from the beginning again ...
View 1 Replies
View Related
Jul 4, 2014
The led display says 75 and stays there after doing a couple other ones
View 3 Replies
View Related
Jun 21, 2014
I would like to delete obsolete drivers from the "update device driver" screen in the device manager. More specifically form the "I want to choose from a list of device drivers on my computer" screen. How to do this?
Attached a printscreen :
View 1 Replies
View Related
Sep 15, 2014
I recently built my first custom PC. Here is a link to the build on PCPartPicker: AMD FX-6300, Sapphire Radeon R9 270, Corsair 300R - Ordered build updated - ajthemacboy's Saved Part List - PCPartPicker
Since then I have had random black screen issues. At one point I reinstalled the OS, and they still occur. You may notice the R9 270 needs a 450W power supply at the least.
At first look you would think this is the problem, but it's not. Before the R9 270 I had an EVGA 750 Ti, which only uses like 60 watts of power or something, as well as a CM430W power supply, and the black screen issues still occurred.
First I returned the power supply for a CS450M, black screen still occurred. Then I returned the 750Ti for an r9 270, and the issue still occurs.
If it's not the graphics card, power supply, or OS, what should I do?
The dump file is attached. It blames NTOSKRNL.EXE, but I have no clue what this is or how to fix it.
View 1 Replies
View Related
Mar 3, 2013
On a new custom built desktop, running Windows 8, I am having the annoying problem with the mouse lagging or sticking on the screen. It can do this differently at times, depending on what program I am in. For instance, on the desktop a few moments ago, just running the mouse pointer back and forth slowly across the screen, it would tend to stick for a couple of seconds when in line with the icons that are on the right side of the screen. As if there was an imaginary line stopping it. In Internet Explorer, it did not want to go to the upper right area where the favorites and home icons are. But at times, the mouse is perfect.
I've upgraded my video card drivers right from the manufacturer's website. It as if something runs in the background intermittently and hangs the mouse for a second or two.
Windows 8 Pro 64 bit
ASUS P9X79 Deluxe Mobo
Intel i7 - 3820
EVGA NVIDIA Geforce GTX 660 ti 2 gig 16x PCIE
32 gigs Kingston HyperX DDR3
240 gig Kingston HyperX Sata III SSD drive
Logitec MK320 Wireless Mouse/Keyboard on USB.
View 4 Replies
View Related
Jun 12, 2013
My windows 8 pro x64 was running normal until I added a logitech cordless rumblepad 2 which uses a USB receiver for the joypad, and after installing the drivers and plugging in windows 8 shows a black screen on first boot but boots normal after a warm reset, this happens every time I switch on until i do a warm reset.
View 1 Replies
View Related
May 20, 2013
So I had to reinstall Windows 8 on my PC, and as usual i install Drivers and such first. Normally it worked, now after i restart the Computer to finish the Driver Updates, i get Black Screen after Windows 8 loading Screen.
View 3 Replies
View Related
May 20, 2013
Since installing Windows 8 to my laptop, I can no longer display to my Samsung USB hub monitor.
When I try to duplicate or extend, the hub says 'Connecting to PC...' but then nothing happens. Something is working as my mouse and keyboard are plugged into the hub and they work. I just cant get the display. I think all my drivers are up to date.
View 9 Replies
View Related
Apr 15, 2014
This is troublesome for a number of reasons.
Can't access BIOS/CMOS.
Can't go into Safemode.
And sometimes, it takes a good 30 seconds after Windows 8.1 log in screen for me to be able to use USB devices. I say USB devices, but what I really need is my keyboard and mouse. Neither work.
View 9 Replies
View Related
Jul 8, 2014
The problem happened after I right click on desktop > Graphic option > first thing that i cant remember what is it .. Then the screen suddenly blank ! (The system is still running).. and i startup with safe mode..it has no problem..
I disabled intel hd grahics 3000 device on safe mode.. and it work's , my screen is not blank anymore.. but without the intel hd grahics i facing many problem like, cant adjust screen's brightness..
What i should do? maybe reset the setting of intel hd grahics ? But how..if i enable the intel hd grahics device..it becomes blank again..
HP Pavilion g series
Microsoft Window 8.1 pro
processor : intel(R) core(TM) i5-2410m cpu
system type:64-bit operating system, x64-based processor
View 9 Replies
View Related
Feb 27, 2013
i got this problem everytime my screen turns black when i update my graphic card drivers and this happens also when my lid closed,
View 7 Replies
View Related
Oct 23, 2013
I tried installing the 8.1 Intel SATA/RAID driver from the ASUS website P8Z68-V motherboard model, but when enabling AHCI in BIOS I'm getting blue screens which is making me think something isn't configured properly in the OS. How to properly enable this in 8.1 yet? I'd definitely like the extra speed out of my SSD
View 8 Replies
View Related
Apr 23, 2014
I built my PC from scratch on Friday 18th April. On the evening of 21st April I turned my PC on and saw a USB error popping up in a yellow box on the bottom right of my screen. This error was popping up every 5 se conds without fail.
I tried to uninstall the drivers for all USB ports and reinstall but this didn't work. Instead I inspected the error from my Device Manager and read this:
"Windows has stopped this device because it has reported problems. (Code 43) A request for the USB device descriptor failed." ((Port_#0011.Hub_#0003)) My USB devices
I have a Gigabyte H87 3HD Motherboard, a Nvidia GTX 760 graphics card, Intel i5 4440 Quad core processor, EVGA 650w Power Supply. I have Windows 8.1 64-bit as an OS.
With all my USB devices plugged in or without ANY plugged in, the error still pops up regardless. This leads me to believe it could be a problem with the motherboard itself.
I have tried the following solutions:
On and Off againUpdated BIOS to F6 VersionUpdated Windows 8.1Updated Chipset + all DriversWindows Hot FixesUsing CMD and NetMon to asses the USB portsSystem restore
I even right clicked on the error on the Device Manager, uninstalled and the error was still pinging up. Is my computer haunted? None of these have worked. I feel like I have exhausted all my options hence why I have named the thread as such.
View 3 Replies
View Related
Oct 25, 2013
Last week my laptop had trouble starting up, it had a problem with atidvag.dll if I recall. I wasn't sure what to do but I got lucky and after a few attempts in managed to boot. Now however it doesn't even get to the point where it could tell me what is wrong, no Windows logo. Just straight in black screen with a cursor in the top left. F2 will take me to BIOS (if I am quick), but no other keys work. Booted onto installation media to try startup repair, no joy, rollback also no joy, tried using command line following the instructions here to force a boot into safe mode but no joy.
View 4 Replies
View Related
May 21, 2014
Asus Vivobook. It was running fine last night, but today it was a bit slow to respond. I eventually restarted it and it told me I have disk problems. Now I'm stuck on a black screen with the Asus logo that reads "Repairing disk errors. This might take over an hour to complete."
It's been this way for multiple hours now. I'm going to leave it overnight and hope it repairs, but, if it doesn't, is there anyway to recover my files? I have some important stuff backed up online, but I haven't backed up in a bit over a month and I don't want to lose my files. Most forums tell me to reinstall Windows 8? Would that make me lose my files, though, and how can I do that if I can't get past this error page?
View 9 Replies
View Related
Apr 30, 2013
Recently I Recieved A Laptop in gift which I owned in the past which is A Dell XPS 15-L521X. It was running all good but suddenly Today morning when I pressed the power button and it boot through the Dell splash screen and after that It booted normal through the Windows 8 boot screen but after that It stucked at a Black Screen.
I passed on 20-min but it stucked there. No Cursor, nothing except The Black Screen. I ran Dell Pre-Boot System Assesment to check any Hardware failware but no everything is just fine. I remember That My Dell Driver Update Utility Notified me that it installed latest Intel Rapid Start Technology Driver on my last boot but I dont know whether its causing the error but The Intel Rapid Start Technology is very essential for SSD users so why will it cause errors?
View 2 Replies
View Related
