So I had to reinstall Windows 8 on my PC, and as usual i install Drivers and such first. Normally it worked, now after i restart the Computer to finish the Driver Updates, i get Black Screen after Windows 8 loading Screen.
View 3 Replies
I was installing the AMD beta driver and suddenly, black screen. It somehow restarted and I logged in, but I saw a black screen and after a few seconds, I was thrown back to the login screen. It was the same in safe mode! is there any way to uninstall the driver without a complete wipe? I don't want to start from the beginning again ...
View 1 Replies View RelatedMy windows 8 pro x64 was running normal until I added a logitech cordless rumblepad 2 which uses a USB receiver for the joypad, and after installing the drivers and plugging in windows 8 shows a black screen on first boot but boots normal after a warm reset, this happens every time I switch on until i do a warm reset.
View 1 Replies View RelatedI would like to delete obsolete drivers from the "update device driver" screen in the device manager. More specifically form the "I want to choose from a list of device drivers on my computer" screen. How to do this?
Attached a printscreen :
i got this problem everytime my screen turns black when i update my graphic card drivers and this happens also when my lid closed,
View 7 Replies View RelatedMy HP Windows 8 laptop started going very slow so I restarted via the power settings. When it restarted it did an update, though it didn't say "update and restart". When it started again and went to desktop it went slow again and I got a "windows is not responding" (or something along those lines) message, then the screen went black, I left it for a few minutes but it stayed black. The cursor was still there and if I right clicked it showed the menu.
After this I did a hard restart and attempted to go into recovery mode, it didn't go the and when I got to desktop I got the same message again, this time the desktop had the usual white highlight when something isn't responding, but still required a hard restart.
I am now on the third time and it seems to be working, I am doing a full computer scan. What I want to know is why it would do such a thing?
If all else fails it's under warranty, but being a student I have a lot of work to do so can't really afford to be without the laptop.
The laptop I have is an ASUS g74, I purchased the copy of windows 8 from microsoft's site, upgrading from windows 7 pro. I opted to keep all my personal files/apps because the programs it warned me as being incompatible were random games and such.
I googled this problem, and it seemed fairly common months ago when windows 8 first came out on dell/HP laptops. It worked flawlessly when I first upgraded and booted up fine but once I restarted I couldn't see anything other than the screen occasionally flickering brighter and darker.
However, if I plug my laptop up to a TV with an HDMI cable I can see everything on the TV. It's just the laptop screen that is blank.
I will try to post a dump file the next chance I have in getting into safe mode. I have an Asus CM6870-CA010S with the NVIDIA GeForce GT 640 card. It has been running like a dream since I got it in April, then I performed the 8.1 update, and innocently updated the drivers. Bad plan. For the past week I've fallen into the labyrinth of uninstalling the card, subsequent iterations of the drivers, clearing registries, performed the "Refresh," all after reading the forums here, on Nvidia's boards, anywhere I can get logical info.
I finally found what I thought was the perfect recipe, uninstalling totally in safe mode, deleting the folders orphaned from uninstalls, cleaning the registry, disabling Window's automatic downloads for drivers and hardware... etc. I had solid uptime for an hour, and I'm not a gamer, and hadn't yet tested my main objectives- Photoshop and Premiere. But HD video was great, and I finally thought I had it licked. Then, black screen. I have no BSODs. The system seems to shut down so fast that it doesn't have time to make dump files, and WhoCrashed.exe keeps pointing to nvlddmkm.sys as the culprit when a dump is made, with either pagefile or IRQL not less or equal errors. I'm so done.
After trying virtually every solid recommendation I can find, I'm about to throw in the towel and either get a whole other brand of graphics card, or take it to the super expensive judgmental hipster repair shop. This post is my last hope, and I'll try to get a dump file the next chance it gives me enough uptime to collect one- and getting into Safe Mode with F8 is seemingly very random.
I windows 8.1 installed an update on its own and when it restarted I can see only a black screen with a cursor flashin time to time, and I get black screen in safe mode as well ..here is what a tried and didn't work :
-safe mode(giving black screen too)
-Restore point(saying impossible to restore)
-fix with a windows 8 cd (some error )
-running cmd through the recovery tools and tried different commands but nothing worked (sfc/scannow, bcdedit /delete value safeboot)
-run through vga card too but same probleme,
My pc is hp probook 470 with switchable graphic cards intel 4000 and amd hd 8750
I just installed 8.1 on my Samsung Series 7 Chronos laptop and it's now unusable. All I get after a reboot now is a blank screen and a vanishing cursor. I can't do CTRL+ALT+DEL or any other button combination. I also can't seem to be able to do a system restore as a restore point doesn't seem to exist for some odd reason. I've also tried the boot into low res mode but I get the same result. The only thing that seems to work is booting into Safe Mode with Networking but that doesn't allow me to install/uninstall anything so it's pretty much useless.
View 9 Replies View Relatedi was just wondering if there has been an updated theme patch version witch fixes the blinking black screen after applying windows updates ?
Everytime i use any theme patcher on win 8 x64 it works fine until i do windows updates then it restarts ant the screen just blinks and its completely black after boot screen.
Yesterday I installed an update for Win 8.1 (It was around 90 some mb) after I login I only get a black screen with a useless white cursor. Screensaver works fine, when I do a CNTRL/SHIFT/ESC the task manager box pops up for a few seconds and disappears. I was able to create another user account and everything works fine, but I need to get my first account working properly ASAP.
View 7 Replies View RelatedWith a flashing mouse? After switching language pack and applying it to new accounts and welcome/lock screen? I am typing this from my laptop, and haven't changed language pack on this one yet.
I need to get my desktop up and running (the one with the "black screen of nothingness").....
My brother just emailed me, he's just installed update 1 from Windows Update correctly and it's rebooted to a black screen and cursor only - nothing works, safe mode is no different - can't open CMD or Task manager
Can't seem to get Advanced options > System restore, PC keeps only giving F8 safemode options, none of them work
He doesn't have any 8.1 Media either. How to get him back into Windows ?
I have recently installed windows updates and after restart the black screen occurred after I typed my password. About five days before that I have reinstalled my Mobile Intel 4 series driver and now in Device manager it shows 3 grayed out monitors which were installed when I have reinstalled the Video driver. The monitor driver that Is currently loaded was installed when I installed the OS itself.
View 9 Replies View RelatedI have a Lenovo Z585 and it seems to be stuck in the early stage of boot up. When powered up the Cap sensor buttons flash every second and the caps lock indicator flashes every other second. The problems seemed to occur after windows 8.1 automatic update. I have tried battery and power lead out, pressing power power on for 30 sec but it did not work.
View 1 Replies View RelatedMy little brother has an 8.1 laptop, and from what I understand, when it prompted him for updates he clicked to restart. Now when the laptop tries to restart he sees his manufacturer logo and the Windows 8 loading circle, but after this the monitor goes black and stays that way. At some point a bluescreen pops up, says something about fixing the PC, goes to 100% after 5 minutes, restarts the PC, and the PC goes back to the manufacturer logo to start the loop again.
View 9 Replies View RelatedI tried updating to Windows 8.1 Update 1 and in didn't go through properly (it hard froze and crashed) and now won't boot past the BIOS. I cannot get into Windows and I cannot get into the Recovery Menu.
I tried recovery USB's and any I create either from a 3rd party or Windows itself results in loading to a black screen with a mouse cursor. Only one worked, Acronis (probably because its Linux) and it showed all the drives ruling out a hardware issue but sadly it cannot repair Windows.
So it seems I might be a victim of the black screen issue some had when moving to Update 1.... BUT the difference is I cannot boot into the recovery menu at all and any recovery media boots to a black screen.
How to get out of this screen and actually boot into anything which will allow me to try to fix the MBR or go back to a restore point.
I thought the point of recovery software was that it loads no matter how corrupted Windows is... obviously not! Something is stopping all of them booting properly.
I recently built my first custom PC. Here is a link to the build on PCPartPicker: AMD FX-6300, Sapphire Radeon R9 270, Corsair 300R - Ordered build updated - ajthemacboy's Saved Part List - PCPartPicker
Since then I have had random black screen issues. At one point I reinstalled the OS, and they still occur. You may notice the R9 270 needs a 450W power supply at the least.
At first look you would think this is the problem, but it's not. Before the R9 270 I had an EVGA 750 Ti, which only uses like 60 watts of power or something, as well as a CM430W power supply, and the black screen issues still occurred.
First I returned the power supply for a CS450M, black screen still occurred. Then I returned the 750Ti for an r9 270, and the issue still occurs.
If it's not the graphics card, power supply, or OS, what should I do?
The dump file is attached. It blames NTOSKRNL.EXE, but I have no clue what this is or how to fix it.
Last week my laptop had trouble starting up, it had a problem with atidvag.dll if I recall. I wasn't sure what to do but I got lucky and after a few attempts in managed to boot. Now however it doesn't even get to the point where it could tell me what is wrong, no Windows logo. Just straight in black screen with a cursor in the top left. F2 will take me to BIOS (if I am quick), but no other keys work. Booted onto installation media to try startup repair, no joy, rollback also no joy, tried using command line following the instructions here to force a boot into safe mode but no joy.
View 4 Replies View RelatedAsus Vivobook. It was running fine last night, but today it was a bit slow to respond. I eventually restarted it and it told me I have disk problems. Now I'm stuck on a black screen with the Asus logo that reads "Repairing disk errors. This might take over an hour to complete."
It's been this way for multiple hours now. I'm going to leave it overnight and hope it repairs, but, if it doesn't, is there anyway to recover my files? I have some important stuff backed up online, but I haven't backed up in a bit over a month and I don't want to lose my files. Most forums tell me to reinstall Windows 8? Would that make me lose my files, though, and how can I do that if I can't get past this error page?
Recently I Recieved A Laptop in gift which I owned in the past which is A Dell XPS 15-L521X. It was running all good but suddenly Today morning when I pressed the power button and it boot through the Dell splash screen and after that It booted normal through the Windows 8 boot screen but after that It stucked at a Black Screen.
I passed on 20-min but it stucked there. No Cursor, nothing except The Black Screen. I ran Dell Pre-Boot System Assesment to check any Hardware failware but no everything is just fine. I remember That My Dell Driver Update Utility Notified me that it installed latest Intel Rapid Start Technology Driver on my last boot but I dont know whether its causing the error but The Intel Rapid Start Technology is very essential for SSD users so why will it cause errors?
I have a Dell Inspiron 1545, the screen is broke so I use an external monitor which doesn't project BIOS or Boot up so I cannot see anything. I found a thread on here that adds the Intel Graphics Driver for Mobile 4 Series for Windows 8 which I supposed would work on 8.1.
The link I installed:
Mobile Intel Series 4 and Intel HD Graphics 1st Generation. I installed it and restarted the laptop for the GUI to start.
But as I restarted, the screen was blank. I tried cycling through projection modes as I usually do, but this time It didn't work.
I have no clue of how to remove the driver to as I cannot see anything on the external monitor as I've tried it on 2.
I've tried booting into Safe Mode but as I've said, I cannot see anything on the screen so I'm not sure where I am.
Prior to this issue I had not installed anything all week nor made any updates, etc. I boot up windows as always and noticed that upon logging in, my lock screen took a while longer to bring me to my desktop. Now my desktop is completely black and my taskbar icons are gone. Opening firefox or any other program through the start menu does NOT make them show up on the taskbar as they always would. My desktop's pretty much disabled. Here's a screenshot.
I would be fine resetting to factory settings, however when it says my computer must restart to enter recovery mode, my computer in the middle of the restart gives me a light blue screen that says Windows encountered a problem and my system must restart. That is cancelling my recovery mode boot and sending me back to my black desktop.
Windows 8 64bit
Core i3@2.6ghz
Nvidia GT740M 2048mb
6GB RAM
720GB HDD
So when I make an invisible icon, it is fine until I restart my computer then it turns black, of before restart and after.
View 9 Replies View RelatedBSOD error. I've read through some posts with similar errors and I've done my best to try some of the basic solutions for this (i.e., update drivers) but can't seem to pin down the actual problem.
I woke up this morning and I had a Driver Power State Failure message on my computer. I've spent all day trying to get it fixed and I'm about to throw this 3 month old laptop through the window (I'm running a Lenovo Y510P with Windows 8.1).
In addition to the BSOD when I try to shut down my computer it never actually shuts down. The screen will go black for about 5 minutes but the light on the power button stays on and the computer starts back up again on its own. However it never actually gets to the desktop. The circle of dots just keeps going and going and after I force it to shut down twice the Automatic Repair kicks in but it says it couldn't fix the issue. When I enter the advanced options and do a system restore I can finally get to the desktop. When I try doing a system restore from the desktop it will get to the end and I get an error message saying it didn't work.
When I get to the desktop some things just don't work right. Right click on a folder, clicking on the file explorer pinned to the taskbar, etc. locks explorer up for a minute then nothing happens.
I've also ran SFC and a it said some files were corrupt and couldn't be repaired. Attached are my log files.
After upgrading a Dell XPS One using both Intel HD 4000 and nVidia 640M graphics, the computer takes 5 minutes to restart. The restart screen immediately shows up after hitting the restart button. Then the screen goes black for 5 minutes. Afterwards the Dell logo shows up and everything starts fine from there. I don't understand why the monitor stays black for 5 minutes before restarting.
View 4 Replies View RelatedIn windows 7 missing drivers were automatically install upon restart,is this missing in win 8.1?
View 4 Replies View RelatedWhen I download some windows 8 updates - not store updates - and restart the PC. After windows boots to desktop it shows me that they are all installed, but after a few minutes they come back as uninstalled and when I install them again the problem continues. What should i do?
View 4 Replies View RelatedEvery time I Restart my Laptop, the Lock Screen does not show the Welcome Screen and skips directly to the User Account login screen. Actually, it shows a darkish blue screen for a couple of seconds and then jumps to the user account login.
When I use the logout function or the shutdown (and I power it back on) everything works normally.
I have ran SFC / Scannow in windows (8.1 by the way).
Just had this new laptop running windows 8 and its an Acer.When I select the photos tile on the screen it goes to another screen which is black with a blue square icon and underneath it tells me that there are no files or folders in this view.There are photos in my picture folder as I just put then in.But if I go to the other method and select the My picture folder the photos are there.
View 7 Replies View Related
