Every time I plugin a device (Memory card, Cell phone etc.) Windows 8.1 automatically opens Devices and Printers which is very annoying. I set Autoplay to "Take no action" but in vain. How can I disable this behavior?
View 9 RepliesMy friend happened to look in Devices and Printers, and in the Multimedia Devices section he had about 10 devices showing up that he never heard of. Six of them were computers with names that he had never heard of, the others were devices that we could not tell what they were.
I expect that these entries mean that at some time they were on the same network that he was on. Would that be correct?
If so, then it is a matter for concern because he never goes on public networks. He only goes on his network at home, and a network in a small office that he rents and shares with one other person. They have their own router with security set up on it, and that router is connected to an Ethernet jack that most likely goes to a switch on a network that also provides internet service to some other offices in the same building.
This computer is only about 2 months old, so these entries can't be too old.
When I looked at his computer, he was on his home network and all those other devices showed as Offline. I right clicked on them all and removed them. Would it be a good guess that perhaps the security of the network at his office was compromised, and those devices were connected to that network at some point?
I told him to monitor and see when they reappear, but he won't be back in that office for 2 weeks.
My friend happened to look in Devices and Printers, and in the Multimedia Devices section he had about 10 devices showing up that he never heard of. Six of them were computers with names that he had never heard of, the others were devices that we could not tell what they were.
I expect that these entries mean that at some time they were on the same network that he was on. Would that be correct?
If so, then it is a matter for concern because he never goes on public networks. He only goes on his network at home, and a network in a small office that he rents and shares with one other person. They have their own router with security set up on it, and that router is connected to an Ethernet jack that most likely goes to a switch on a network that also provides internet service to some other offices in the same building.
This computer is only about 2 months old, so these entries can't be too old.
When I looked at his computer, he was on his home network and all those other devices showed as Offline. I right clicked on them all and removed them. Would it be a good guess that perhaps the security of the network at his office was compromised, and those devices were connected to that network at some point?
I told him to monitor and see when they reappear, but he won't be back in that office for 2 weeks.
I have recently purchased a new HP Officejet Pro 8620 and am currently having problems actually using it.
I have already installed the full-feature driver from the HP website but the printer does not appear in devices and printers. However my printer does appear in print dialog and the device manager. I have tried adding the printer through devices and printers but it has no effect.
When I try to print anything through print dialog or any application for that matter no print job is sent. Basically I can't print anything from my computer now.
I have already re-installed the driver multiple times only to come up with similar results. This is for my main computer which is a HP Envy dv7. Also I have connected to the printer via the wireless router option.
However for my second computer which is a Dell XPS 12 everything worked fine right from the start which also connected to the printer wirelessly.
New printers do not display in Windows 8.1 Devices and Printers (no icon):
New Dell, clean install:
- Reinstalled Dell Factory Image
- Updated to Windows 8.1
- Installed Office 2013
- Added BUILT-IN Windows Driver for LaserJet 5P/5MP
- Added Epson driver for Windows 8 64 bit from Epson website
Neither printer shows in Devices and Printers.
Rebooted. Stopped and started print spooler. Checked registry and all printers, including the new ones, appear to be listed in all the correct registry areas.
Open Notepad, select Print, both printers are listed.
Both printers print. When in Notepad, select Print, I can right click on the printer, select properties, and control the printer, print test pages, change drivers and preferences, etc.
The ONLY PROBLEM is the printers do not show in Devices and Printers, so I cannot control them from there.
When I go toControl Panel -> Hardware and Sound -> Devices and Printersit can take 5 minutes or more to populate the window. A green bar slowly progressing along the top.
Sometimes (not always) when I click on the Network icon it shows an empty window, taking five or more minutes, also with a green bar slowly progressing along the top. EDIT: After I submitted this post I saw that the network window had finally populated. Still, it was incredibly slow and happened after the window showed a message saying "This folder is empty."
If I go to This PC that comes up almost instantly, including the mapped network drives.
For some reason the green bar goes all the way across the top of the screen before the devices and printers menu will load. In then loads without an issue after waiting for almost two full minutes. This is a core I7 Win 8.1 PC with 16GB of ram and an SSD so it screams otherwise.
I do have a lot of devices on my home network but my windows 7 PC which is on the same network loads the devices and printers menu almost instantly. If it were a device hanging up you would think that the Windows 7 PC would also be affected but it isn't. I will say that Windows 8.1 does identify a whole lot more devices that fall into the category of "multimedia devices" on the network than does windows 7.
I have a Dell Inspiron laptop that I had to restore to the factory Dell settings recently. After formatting the hard drive and re-installing windows 8 I noticed that the computer name in the devices and printers panel was Dell, Inc. instead of the computer name that I put in when re-installing windows. Is there a way to change the computer name in the devices and printers panel so that it matches the computer name in the system panel? I can change the computer name by going into the system panel but that doesn't change the name in the devices and printer panel.
View 9 Replies View RelatedWhen I go to my "Device and Printers" it says under "Multimedia Devices" Blu-ray Disc Player. What is that for because I put a bluray disc in my drive but nothing happens. I was just wondering what is is there for if it doesn't play blu rays.
View 1 Replies View RelatedThe AutoPlay dialog box dosn't appear when plug-in USB
When we plug in the USB device ,
windows open it automatically and never appear the option
it dosn't give me time to scan usb
how can I enable this feature
I have two network printers, a HP 1006 that is shared off my Windows Home Server and a Brother 2070N that is shared from another Dell PC running Windows 7. I can print to these shared printers from every other PC attached to my home LAN but the Windows 8 PC. I cannot add drivers but I can "see" both printers when I go to Control Panel and try to add the printers. Trouble with printing?
View 3 Replies View RelatedI've just set up a clean system installation (Win 8.1 PRo x64). As a part of it I obviously installed my printer driver. The printer is Lexmark E260d and I use Lexmark Universal Driver downloaded directly from Lexmark's webpage.
My surprise is that after installation I have two such printers available at my system:
- "Lexmark E260" - which is the name I gave during installation,
- "Lexmark International Lexmark E260d" - which is another device appearing as a printer.
Both drivers / devices (?) print correctly yet I can see some differences in their functionality descriptions, when choosing Properties / Hardware. Lexmark E260 device has there "Print queues" only while Lexmark International... device has three types "Printers", "Print queues" and "Universal Serial Bus controllers". Another thing is when I double click on devices icons in "Devices and Printers" window - Lexmark E260 brings well-known list of documents actually being printed and Lexmark International... brings printer configuration dialog allowing to see printing documents, customize printer setting and so on.
Why I have somehow two different printers appearing on my system? Should I remove one of them and which? How can I avoid duplicating devices when installing drivers?
Last part of the message, (Device Descriptor Request Failed). I get this, in Device Manager, and I have searched for an answer on the net. Also it is a Code 43. I went through my laptop, with an HP Technician this morning, I might add at a cost of 5p/minute, for 30 odd minutes. He has said that because I had gone over to Windows 8.1 and the recovery discs I made will not load, to put back in Windows 8. I have to send the laptop back for re-installing the OS, because Windows 8.1 do not have the update for my problem. Also the R.H. USB socket has a failure ID:0GAPTK-6T7716-MFPWWK-8D1Q03. I personally think that this is all what the problem is. a duff USB. Is this a cop-out???
Does Windows 8.1 having driver WHQL problems?
I only found out the problem with the usb when I tried to download a Mobi file to a Kindle for my wife. The other usb's work OK.
when look in the device manager i get this:
[URL]
and PCI Device above this to unknown device ( i took this photo from google)
when i try to delete it back after restart or Scan hardware change
lenovo ThinkPad Edge E540 20C6006JIV win 8.1
Our customer has recently upgraded Windows server from 2003 to 2008.
In new server, we saw that network printer's definition in registry is in the format of 'Printer on Server', while in old server the printer format was mainly 'ServerPrinter' (although the 'Printer on Server' format existed there too).
So due to this change in printer 'format', we need to modify our software to recognize the new format.
How does windows determines which format to use in printer definition? Is there a way to switch between formats?
(Note: I refer to printer definition under HKEY_CURRENT_USERSoftwareMicrosoftWindows NTCurrentVersionDevices registry key) ...
You can prevent Windows from downloading the latest drivers for whichever device, BUT you can't prevent it from auto-installing drivers that it already has for whichever device. Meaning, the below trick, does nothing and Windows still installs drivers for several devices after you uninstall them and restart:
hQBU6.jpg
How can I prevent it from auto-installing drivers completely??
Every time I need to do something on my external hard drive, it has to spin up. I'm using an SSD for my primary HD, so waiting on an external HD to spin up makes me have to wait 4-5 seconds for something to load when it's on my external -- I'm not used to waiting.
Is there a way I can make sure my external HD continues to spin regardless of I'm using it or not? I also notice that I have to wait on it to spin up when I'm shutting down or booting up.
Photo app automatically opens when I plug in my Ipod, which I don't want it to do.how to turn this off?
View 5 Replies View RelatedMy usb ports do not recognize some devices. Sometimes when I plug one device another one is unplugged., some times a specific usb port works, sometimes it doesn't. eg: when i unplug the mouse nw and plug it again it will stop working. if i plug another device eon a different usb port the mouse is disconnected. I went to control panel devices Manger and uninstalled every usb port and enable it again with no results.
View 2 Replies View RelatedI am unsure whether I should enable "Automatically get device drivers, apps, and info for new devices" when installing Windows 8 Pro?
What exactly will it do?
If I enable this, will Windows then automatically install software packages/drivers from the manufacturer, like for example the Logitech Setpoint software for their keyboards and mouse and similar software for other devices? I don't want or need that. Or will it behave like in Windows 7?
On my other PC with Windows 7 I see in Windows Update that there are a couple of optional updates, including that Logitech stuff, as well as some driver for a BenQ monitor I have and also nvidia video drivers. This kind of stuff I don't want or need installed automatically as important updates in Windows Update - so I am worried if enabling this automatic driver stuff in Windows 8 is different than Windows 7? Meaning that it will get installed secretly/automatically?
However, it's fine that Windows finds them so I can manually go and check if I want to install any of it.
The key is that the updates are optional in Windows 7, but I have seen a few people complain about Windows 8 installing stuff like video drivers and mouse drivers automatically.
I've installed Microsoft Windows 8.1 Version 6.3.9600 Build 9600 on my HP 430 Notebook PC with 1 GB RAM and Pentium CPU @ 2GHz 2 Cores.
Display drivers are not working properly (i.e., everything appears bigger and unclear), earlier I'd successfully updated the display drivers and made it work using Device Manager. making a backup of the drivers (may be in .inf format) from the installed drivers so that I don't have to update it every time I re-install it.
My power efficiency report is telling me that none of my USB hubs and devices are entering selective suspend.
View 1 Replies View RelatedI have a weird issue in which after a boot of the machine it will take some time for USB devices to become initialized, yes... this includes my USB keyboard and mouse. So essentially even though the system may be up and running at the user logon screen, I have to wait five seconds until I can type my password in on my USB connected keyboard.
View 3 Replies View RelatedI am having problems with USB 3 devices disconnecting and reconnecting all the time when they are plugged into the Esata ports on the back of the motherboard in my sig. The USB 3 devices work ok in the normal USB 2 and 3 ports on the motherboard but I am not sure why they are not working in the Esata ports? I'm running Windows 8.1 with all the latest drivers and I am also running the BIOS f7e provided by Gigabyte to see if this would resolve the issue but it's not worked. If I connect USB 2 devices to the Esata ports they work ok, but could they possibly be faulty as they are not working correctly with USB3 devices?
View 4 Replies View RelatedWhenever I try to connect my flash drive, phone or digi cams. It can't detect anything then I saw this in device manager, is this the culprit?
View 1 Replies View RelatedI have recently built a new computer and installed Windows 8. All was running fine (including USB devices such as iPhone, flash drive etc), however since upgrading to Windows 8.1, none of my USB devices are showing up at all. Oddly, the mouse and keyboard still work.
When I go into the BIOS, all my devices (iPhone, Flash drive, keyboard and mouse etc) all show up in there, so I'm guessing it's a driver/Windows 8.1 issue that I'm missing?
I have been to the ASUS website and downloaded all the drivers I can find, but still no luck.
My motherboard is an "Asus Z97 Pro". I have tried contacting Asus support, but they are completely useless!
I'm having an issue where if my USB devices are plugged in when i start my computer they are fine. but if i try to plug in a thumbdrive after it's already been turned on it won't recognize it. nothing.
Just Ran the SFC /scannow and i don't know what to make of it. it is attach The Attached file has the SFC details. not sure what to make of it.
Running
Windows 8.1 x64
Gygabyte: z68a-d3h-b3
(will attach more if needed.)
I have a Dell Inspiron 660 PC w/windows 8.1 no matter what I plug into the usb port I cannot find it on my computer. I hear the connect/disconnect sound, but can't find anything on the computer as to where it is at or how to open it. The device is a storage device with photos. It also does the same thing with my phone. I hear it, but nothing opens or comes up anywhere.
View 3 Replies View Related I'm running a custom build PC on which I clean installed a (legal) copy of Windows 8.1
My system works fine except it can not install drivers for ANYTHING non-standard. Keyboard, mouse, memory sticks, HDDs all work fine, however when I plug in my phone/tablet/camera etc via USB, it fails to install drivers and I can't use my device.
Here's what device manager looks like with my (android) phone plugged in
And when I select Update driver software, I get this error:
I have an iomega portable usb drive. I can plug into any of my windows 7 machines and access the files and store data on it. when I put into my win 8 machine it shows in devices and printers and in my computer shows as removable disk but you cannot open it up.
I have went into device manager and tried to update the usb driver installed but no use at all.
really strange that it shows in devices and printers but I cannot get the files.
the thing is I need to install and transfer some backups onto my win 8 machine so I need it to work desperately.
After upgrading to 8.1 all of my previously listed devices are no longer listed under devices... in fact there are no devices listed. I can also not add a device. If I look in device manager they are listed there and if I go to print the printer shows up and I can print. The screenshot below shows what I see when I open "Devices and Printers" in control panel. The biggest issue is not being able to add devices like Bluetooth speaker.
View 6 Replies View Related