Hardware Drivers :: USB Devices Not Entering Selective Suspend
Aug 10, 2014My power efficiency report is telling me that none of my USB hubs and devices are entering selective suspend.
View 1 Replies
ADVERTISEMENT
Hardware Drivers :: Unexpected Devices Appear In Devices And Printers?
Jun 4, 2014My friend happened to look in Devices and Printers, and in the Multimedia Devices section he had about 10 devices showing up that he never heard of. Six of them were computers with names that he had never heard of, the others were devices that we could not tell what they were.
I expect that these entries mean that at some time they were on the same network that he was on. Would that be correct?
If so, then it is a matter for concern because he never goes on public networks. He only goes on his network at home, and a network in a small office that he rents and shares with one other person. They have their own router with security set up on it, and that router is connected to an Ethernet jack that most likely goes to a switch on a network that also provides internet service to some other offices in the same building.
This computer is only about 2 months old, so these entries can't be too old.
When I looked at his computer, he was on his home network and all those other devices showed as Offline. I right clicked on them all and removed them. Would it be a good guess that perhaps the security of the network at his office was compromised, and those devices were connected to that network at some point?
I told him to monitor and see when they reappear, but he won't be back in that office for 2 weeks.
Hibernate / Shut Down And Suspend Buttons All Log User Out Of Session
Oct 31, 2012Whenever I want to shut down my computer, it happens that it doesn't matter if I click the Shut Down button or Hibernate or Suspend all do the same, log me out of my session and take me to the Lock Screen image that I've setted. The only way to shut down my computer from Windows is pressing the power off button on my computer and as far as I understand this strange behaviour isn't normal. So how to make all those buttons do their work properly? Over all the Shut Down button. How can I configure that?
Extra information about my computer:
Windows 8 Professional (Activated), 3 Gb RAM memory, GeForce GT 430 video card, ASRock motherboard, hard drive partitioned with Arch Linux OS installed on the other partition.
Hardware Drivers :: USB Ports Do Not Recognize Some Devices
Jul 8, 2014My usb ports do not recognize some devices. Sometimes when I plug one device another one is unplugged., some times a specific usb port works, sometimes it doesn't. eg: when i unplug the mouse nw and plug it again it will stop working. if i plug another device eon a different usb port the mouse is disconnected. I went to control panel devices Manger and uninstalled every usb port and enable it again with no results.
View 2 Replies View RelatedHardware Drivers :: New HP Officejet Pro 8620 Does Not Appear In Devices And Printers
Jul 29, 2014I have recently purchased a new HP Officejet Pro 8620 and am currently having problems actually using it.
I have already installed the full-feature driver from the HP website but the printer does not appear in devices and printers. However my printer does appear in print dialog and the device manager. I have tried adding the printer through devices and printers but it has no effect.
When I try to print anything through print dialog or any application for that matter no print job is sent. Basically I can't print anything from my computer now.
I have already re-installed the driver multiple times only to come up with similar results. This is for my main computer which is a HP Envy dv7. Also I have connected to the printer via the wireless router option.
However for my second computer which is a Dell XPS 12 everything worked fine right from the start which also connected to the printer wirelessly.
Hardware Drivers :: USB Devices Take Time To Initialize At Boot
Jul 2, 2014I have a weird issue in which after a boot of the machine it will take some time for USB devices to become initialized, yes... this includes my USB keyboard and mouse. So essentially even though the system may be up and running at the user logon screen, I have to wait five seconds until I can type my password in on my USB connected keyboard.
View 3 Replies View RelatedHardware Drivers :: USB 3 Devices Disconnecting Esata Ports
Jan 3, 2014I am having problems with USB 3 devices disconnecting and reconnecting all the time when they are plugged into the Esata ports on the back of the motherboard in my sig. The USB 3 devices work ok in the normal USB 2 and 3 ports on the motherboard but I am not sure why they are not working in the Esata ports? I'm running Windows 8.1 with all the latest drivers and I am also running the BIOS f7e provided by Gigabyte to see if this would resolve the issue but it's not worked. If I connect USB 2 devices to the Esata ports they work ok, but could they possibly be faulty as they are not working correctly with USB3 devices?
View 4 Replies View RelatedHardware Drivers :: USB Ports Don't Detect Connected Devices?
Apr 22, 2014Whenever I try to connect my flash drive, phone or digi cams. It can't detect anything then I saw this in device manager, is this the culprit?
View 1 Replies View RelatedHardware Drivers :: Asus Z97 Pro - USB Devices Seen In BIOS But Not In Windows 8.1
Jun 6, 2014I have recently built a new computer and installed Windows 8. All was running fine (including USB devices such as iPhone, flash drive etc), however since upgrading to Windows 8.1, none of my USB devices are showing up at all. Oddly, the mouse and keyboard still work.
When I go into the BIOS, all my devices (iPhone, Flash drive, keyboard and mouse etc) all show up in there, so I'm guessing it's a driver/Windows 8.1 issue that I'm missing?
I have been to the ASUS website and downloaded all the drivers I can find, but still no luck.
My motherboard is an "Asus Z97 Pro". I have tried contacting Asus support, but they are completely useless!
Hardware Drivers :: Computer Needs Restart For USB Devices To Recognize
Feb 9, 2014I'm having an issue where if my USB devices are plugged in when i start my computer they are fine. but if i try to plug in a thumbdrive after it's already been turned on it won't recognize it. nothing.
Just Ran the SFC /scannow and i don't know what to make of it. it is attach The Attached file has the SFC details. not sure what to make of it.
Running
Windows 8.1 x64
Gygabyte: z68a-d3h-b3
(will attach more if needed.)
Hardware Drivers :: New Printer Missing In Devices And Printers In Win 8.1
May 23, 2014New printers do not display in Windows 8.1 Devices and Printers (no icon):
New Dell, clean install:
- Reinstalled Dell Factory Image
- Updated to Windows 8.1
- Installed Office 2013
- Added BUILT-IN Windows Driver for LaserJet 5P/5MP
- Added Epson driver for Windows 8 64 bit from Epson website
Neither printer shows in Devices and Printers.
Rebooted. Stopped and started print spooler. Checked registry and all printers, including the new ones, appear to be listed in all the correct registry areas.
Open Notepad, select Print, both printers are listed.
Both printers print. When in Notepad, select Print, I can right click on the printer, select properties, and control the printer, print test pages, change drivers and preferences, etc.
The ONLY PROBLEM is the printers do not show in Devices and Printers, so I cannot control them from there.
Hardware Drivers :: External Devices Won't Show Up On Computer
Sep 15, 2014I have a Dell Inspiron 660 PC w/windows 8.1 no matter what I plug into the usb port I cannot find it on my computer. I hear the connect/disconnect sound, but can't find anything on the computer as to where it is at or how to open it. The device is a storage device with photos. It also does the same thing with my phone. I hear it, but nothing opens or comes up anywhere.
View 3 Replies View RelatedHardware Drivers :: Slow Population Of Devices / Printers Window?
Jun 29, 2014When I go toControl Panel -> Hardware and Sound -> Devices and Printersit can take 5 minutes or more to populate the window. A green bar slowly progressing along the top.
Sometimes (not always) when I click on the Network icon it shows an empty window, taking five or more minutes, also with a green bar slowly progressing along the top. EDIT: After I submitted this post I saw that the network window had finally populated. Still, it was incredibly slow and happened after the window showed a message saying "This folder is empty."
If I go to This PC that comes up almost instantly, including the mapped network drives.
Hardware Drivers :: External Drive Shows In Devices But Cannot Access
Jan 14, 2014I have an iomega portable usb drive. I can plug into any of my windows 7 machines and access the files and store data on it. when I put into my win 8 machine it shows in devices and printers and in my computer shows as removable disk but you cannot open it up.
I have went into device manager and tried to update the usb driver installed but no use at all.
really strange that it shows in devices and printers but I cannot get the files.
the thing is I need to install and transfer some backups onto my win 8 machine so I need it to work desperately.
Hardware Drivers :: Windows 8.1 Upgrade - Devices No Longer Listed
Oct 20, 2013After upgrading to 8.1 all of my previously listed devices are no longer listed under devices... in fact there are no devices listed. I can also not add a device. If I look in device manager they are listed there and if I go to print the printer shows up and I can print. The screenshot below shows what I see when I open "Devices and Printers" in control panel. The biggest issue is not being able to add devices like Bluetooth speaker.
View 6 Replies View RelatedHardware Drivers :: Windows 8 PC Doesn't Recognize USB Ported Devices
Jun 7, 2014I have run into a problem with my Windows 8 computer once in a while, it's that my PC doesn't recognize USB ported devices as supposed to, but it does recognize things such as a wireless mouse and keyboard. Now, my question is, can I buy a wired Xbox 360 controller and connect it to my computer, and trust it to download the drivers correctly, and work like it's supposed to? I have got a new game, and really want the controller to work for it.
View 2 Replies View RelatedHardware Drivers :: USB3 Devices On Powered USB2 Hubs
Mar 15, 2013My observation on using a couple of USB3 small passport 2TB self powered disk drives when I connect then to a powered standard usb2 hub is that they perform FAR FASTER than external USB 2 disk drives --especially the self powered small pocket size one's.
So if you are buying external drives --even if you don't have USB3 ports on your machine it's still worth going for the USB 3 drive.
Hardware Drivers :: Unexpected Device Appearing In Devices And Printers
Feb 7, 2012My friend happened to look in Devices and Printers, and in the Multimedia Devices section he had about 10 devices showing up that he never heard of. Six of them were computers with names that he had never heard of, the others were devices that we could not tell what they were.
I expect that these entries mean that at some time they were on the same network that he was on. Would that be correct?
If so, then it is a matter for concern because he never goes on public networks. He only goes on his network at home, and a network in a small office that he rents and shares with one other person. They have their own router with security set up on it, and that router is connected to an Ethernet jack that most likely goes to a switch on a network that also provides internet service to some other offices in the same building.
This computer is only about 2 months old, so these entries can't be too old.
When I looked at his computer, he was on his home network and all those other devices showed as Offline. I right clicked on them all and removed them. Would it be a good guess that perhaps the security of the network at his office was compromised, and those devices were connected to that network at some point?
I told him to monitor and see when they reappear, but he won't be back in that office for 2 weeks.
Hardware Drivers :: Win 8 Update - Audio Devices No Longer Working
Dec 15, 2013I recently switched my pc from 2 AMD cards to 2 Nvidia cards, when i was preparing to install the 2 cards, i shut down my computer, during the shutdown it asked me to update and shutdown win 8 which i did. ever since i did that my audio devices are not detecting.. nothing i do is working.
When i use my plug and play speakers, they are not recognized... let me rephrase.. in the playback devices menu they show up as "Speakers" as they always have, then quickly disappear, then show up again, then disappear again, then back and forth over and over and over again..... i tried uninstalling my audio drivers and reinstalling. this did not work. i can get sound with the speakers, by just pluggin them into my TV, but i cant control the audio or the 5.1 surround from the tv, it just shows them as stereo...
Asus Sabretooh 990 fx R2
AMD 4.3 vishera FX 8 core
GTX 780Ti (primary)
GTX 480 Superclocked (dedicated physx)
850 modular psu
16GB GDDR3 g.skill
i never had this problem until A) new cards, and B) installed the win 8 update... But i rolled my computer back to a date before that update, and then turned updates off in case that was it..
i've also tried installing drivers directly from realtek, directly from my motherboard website. i've uninstalled and reinstalled, and stopped windows from auto installing during my realtek installs on the drivers...
just cant figure out why it flickers like that, the speakers work fine in other devices (e.g the tv).
Here is a screenshot of when i try to download drivers, i get an error 0xE0000247....
And a pic of my device manger
Hardware Drivers :: Prevent Opening Devices And Printers On Device Plugin
Jan 19, 2014Every time I plugin a device (Memory card, Cell phone etc.) Windows 8.1 automatically opens Devices and Printers which is very annoying. I set Autoplay to "Take no action" but in vain. How can I disable this behavior?
View 9 Replies View RelatedHardware Drivers :: Windows 8 - Multiple Devices (WiFi / Biometrics And Display)
Dec 19, 2013I have been several problems for a while since I installed Windows 8.
Firstly my screen and WiFi randomly stop working (at different times).
The screen goes blank (black) and it won't do anything (even caps lock) so I think it's completely frozen. Usually I hard reset, but today I got distracted and it eventually came back. No event logs or anything.
With the wifi, it says it can't detect any networks (red cross icon) and again the only fix is a hard reset, reinstalling drivers doesn't work.
Finally, recently my fingerprint scanner wouldn't let me log in. It says in biometric devices that it's unavailable, but none of the explanations applicable. I tried deleting my metrics and reinstalling but nothing...
I have an HP pavilion tx2 1250ea but I had to replace the motherboard and it's a 1050 or something, but obviously it's compatible.
Hardware Drivers :: WAN Miniport Devices Have Yellow Exclamation Mark In Windows 8
Sep 11, 2012After I upgraded my windows 7 to windows 8 pro I had this problem . There are four devices that have a yellow exclamation mark showing in the Device manager.
They are WAN Miniport (IKEv2 / L2TP/PPTP/SSTP)
All of them show this error: This device is not working properly because Windows cannot load the drivers required for this device. (Code 31)
I don not know what these devices do or how to fix it .. I have also problem in Merto apps they cannot connect to the internet even though I can browse and download .. I do not know if those WAN Miniport devices cause this problem.
Hardware Drivers :: Devices And Printers Menu Takes Forever To Load
Dec 12, 2013For some reason the green bar goes all the way across the top of the screen before the devices and printers menu will load. In then loads without an issue after waiting for almost two full minutes. This is a core I7 Win 8.1 PC with 16GB of ram and an SSD so it screams otherwise.
I do have a lot of devices on my home network but my windows 7 PC which is on the same network loads the devices and printers menu almost instantly. If it were a device hanging up you would think that the Windows 7 PC would also be affected but it isn't. I will say that Windows 8.1 does identify a whole lot more devices that fall into the category of "multimedia devices" on the network than does windows 7.
Hardware Drivers :: (Eject Media) Icon Appears With No Devices Plugged In
Jan 12, 2014Windows 8.1 Pro.
The icon of "Safely Remove Hardware and Eject Media" appears even when i not have any devices plugged in.
And if i click it it shows below the "Open Devices and Printers" an item with text "..." which is disabled..
Accounts :: Selective User Password
Nov 7, 2013Possible to have it so that my surface pro 2 won't prompt me for my user password if I'm at home and connected to my home lan?
View 1 Replies View RelatedWindows 8.1 - MSConfig On Selective Start Up
Mar 9, 2014I have made clean installation of win 8.1 and saw that the msconfig is on selective start up, no matter what I did it go back to selective startup.
When I enabled administrator account the msconfig show normal start up.
I formatted the whole HDD ones again and install windows again and its still on selective start up.
I tried to create new account and deleted the old one and still on selective startup.
Under administrator its on normal startup
Its windows 8.1 pro x64
On the bios every thing is Default
Main board is Z77 EXTREEM 4
I install the OS not! on UEFI
Hardware Drivers :: HTPC Server / Windows 8.1 - Wireless Devices Range Dropped
Aug 23, 2014I just recently bought a new HTPC server and installed Windows 8.1 on it. Everything seems to work great except my USB mouse and keyboard. The range of these wireless devices dropped to just about one meter. They work further away if I lift them high in the air but from waist level they only work from very close ranges. Before they used to work perfectly from distances up to 5 meters.
What's odd is that the USB recievers are in the exact same spots as they were in my old computer. I have an extender cable and a hub so there are no obstacles between the recievers and the devices. I'm not sure whether this is because of Windows 8 or because of the new hardware. My previous computer was a laptop running Win7 but the new one is a desktop. The devices seemed to work bad even in BIOS so I suspect it's the hardware.
I have installed latest drivers, replaced batteries and tried different positions for the recievers but nothing seems to fix this issue. I have not added any new wireless devices in the household.
Keyboard: Microsoft Wireless Keyboard 3000 v2
Mouse: Logitech M505 Wireless Mouse
System:
Intel i3 4150
4GB DDR3
Asus H97I PLUS M-ITX
500W
Windows 8.1 x64
Previous system:
Intel i3 350M
3GB DDR3
Dell Vostro 3300 laptop motherboard
Windows 7 x64
System Configuration Stuck On Selective Startup
Jan 27, 2013For some reason System Configuration's Startup Selection is stuck on "Selective startup". When I change it to 'Normal startup" and close ad then reopen System Configuration it reverts back to "Selective startup".
Also, not sure if it's related, maybe once out of every 4 or 5 boots Windows 8 starts to the Desktop instead of the Start Screen. This is a relatively new install.
Network / Sharing :: Selective SkyDrive Sync For Work Stations
Jan 13, 2014I have three computers that are used for different purposes. I want to be selective on which files/folders have local copies on the different machines. Here's an outline of the system and the goals:
One SkyDrive account with folders F1, F2, F3.
Laptop 1 runs Win7Pro and needs local copies of folders F1, F2, F3
Tablet 2 runs Win8Pro and needs local copies of folders F1, F2
Laptop 3 runs Windows 8.1Pro and needs local copy of F3 only
Can this be done?
Passwords Removal Before Entering Into The Lab?
Dec 13, 2013My computer is going to the lab.
However, it has logon details, including email's password.
I don't want the techies call me and ask for the password.
How To Start Computer Without Entering A Password
Feb 11, 2014I have my laptop set up so I don't have to enter a password each time I start it. But I recently changed my password in my Microsoft account by going into Microsoft.com. Now when I start my laptop, it stops half way giving a message that it has an invalid password. At this point, I just enter my new password and it finishes booting up with no problem.
So my question is how do I synchronize the password that my laptop is using to the new changed password in my Microsoft account?
Just as a note, I forgot the password that I had originally set up on my laptop.