Hardware Drivers :: Windows 8 - Multiple Devices (WiFi / Biometrics And Display)

Dec 19, 2013

I have been several problems for a while since I installed Windows 8.

Firstly my screen and WiFi randomly stop working (at different times).

The screen goes blank (black) and it won't do anything (even caps lock) so I think it's completely frozen. Usually I hard reset, but today I got distracted and it eventually came back. No event logs or anything.

With the wifi, it says it can't detect any networks (red cross icon) and again the only fix is a hard reset, reinstalling drivers doesn't work.

Finally, recently my fingerprint scanner wouldn't let me log in. It says in biometric devices that it's unavailable, but none of the explanations applicable. I tried deleting my metrics and reinstalling but nothing...

I have an HP pavilion tx2 1250ea but I had to replace the motherboard and it's a 1050 or something, but obviously it's compatible.

View 2 Replies


ADVERTISEMENT

Hardware Drivers :: Unexpected Devices Appear In Devices And Printers?

Jun 4, 2014

My friend happened to look in Devices and Printers, and in the Multimedia Devices section he had about 10 devices showing up that he never heard of. Six of them were computers with names that he had never heard of, the others were devices that we could not tell what they were.

I expect that these entries mean that at some time they were on the same network that he was on. Would that be correct?

If so, then it is a matter for concern because he never goes on public networks. He only goes on his network at home, and a network in a small office that he rents and shares with one other person. They have their own router with security set up on it, and that router is connected to an Ethernet jack that most likely goes to a switch on a network that also provides internet service to some other offices in the same building.

This computer is only about 2 months old, so these entries can't be too old.

When I looked at his computer, he was on his home network and all those other devices showed as Offline. I right clicked on them all and removed them. Would it be a good guess that perhaps the security of the network at his office was compromised, and those devices were connected to that network at some point?

I told him to monitor and see when they reappear, but he won't be back in that office for 2 weeks.

View 4 Replies View Related

Getting Multiple Devices Shown Under My Computer

May 26, 2014

Lately I have observed that whenever I connect my computer through WiFi, I see various other devices visible under 'my computer', like network gateway, mobile phones, and other devices.

Is it because the network settings had network visibility option checked 'on'.

Also, would that mean someone may have accessed the files on my computer.

I want to know who else can access my computer through the same WiFi that I am connected to.

View 5 Replies View Related

Windows 8.1 On Acer 5920G (WiFi Adapter And More Devices Can't Run)

Oct 8, 2013

Windows 8.1 on Acer 5920G (WiFi adapter and more devices can't run)

After installation Windows 8.1 on my (ok old) laptop all seems normal but after reboot no WiFi, no Internet, no working WiFi adapter (the device can't start).

In device manager, wifi card (try 2 different intel cards Intel WiFi Link 4965AGN and Centrino Advanced-N 6250 AGN) can't start to work.

In the device manager 2-3 more unknown devices (yellow mark, no drivers or can't start work) but without Internet i can't try to fix this problems (2 pci devices and this one intel communication device).

I try all the known ways to add drivers (setup, manual....no internet) or to make it work but nothing, the devices don't works, can't start works (error code 10, i think).

So what can i do? NO windows 8.1 on my laptop? Now back to Windows 8.

My laptop Acer Aspire 5920G | CPU: T9500 (max 2800MHz) | VGA: Nvidia 9600M GT (512Mb) | RAM: 4GB | HDD: Seagate Momentus XT Hybrid 500GB (SSD/HDD 7200 RPM) | OS: Windows 8 Pro wmc 64bit

View 9 Replies View Related

Debugging :: BSOD Multiple Times With Multiple Drivers / Bug Check Settings

Jul 19, 2014

I built a computer recently. Since day one I get BSODs but the drivers, and Bug/Checks listed are never the same.I was thinking it couldn't be a single device or driver so I've:

Replaced the MOBO.
Repair Installed the OS.
Replaced the RAM.

It BSOD'd multiple times between each change.

The only things I've run are IE/FF and Ableton Live 9. Ableton is usually running during the BSOD but it was not the last time.

View 6 Replies View Related

Network / Sharing :: 0.05 Mbps WiFi Speed Test On All Of Devices?

Aug 9, 2013

today when i tryed to watch a youtube video i noticed i couldent play the video on my asus laptop even on 144p (useualy i can play 720p vids easily) i then i tryed with my iphone and then my macbook and it still wil not load i tryed a speed test and got about 0.05 mbps o have done everything in my power to fix it

View 1 Replies View Related

Display Time On Multiple Monitors?

May 6, 2014

I have two monitors. Some of my programs can take the whole screen, covering up everything including the task bar. In W7, I just used the MS clock gadget which I moved to the second screen so I could always see the time. Now in Windows 8.1 Update, I can see all the apps that I've pined to the active task bar, but I don't see the system tray with the time to the right. Doesn't have to be the task bar, of course -- could be a floating clock in the upper right or left or anywhere you like.

View 1 Replies View Related

Graphic Cards :: How To Get Multiple Monitor Support Via Display Port

Jan 22, 2013

In a few weeks (I can't wait! ) I will replace my laptop with the Surface Pro.

Right now, though, I have my laptop connected to two monitors: One via VGA and other via DVI. I'm running Windows 8 Pro x64, so this all works great.

So the big question is whether it is possible to have multi-monitor support via the one-and-only DisplayPort that is on the Surface Pro? If so, what--if any--additional hardware would I need?

When I'm docked at home and using my Surface Pro as laptop, I really need to keep the functionality of using both external monitors (one is 31" and the other 29"). I would really hate to go back to only being able to use one.

View 9 Replies View Related

Debugging :: Multiple Errors And BSOD During Boot And Switching WiFi

Apr 7, 2014

I recently updated to win 8.1 after I just got my freshly installed win 8 lenovo ideapad U510 back from the repair depot. The following errors occured that I can remember:

Kernel Security Check Failure
Bad Pool Caller
Driver Corrupted Expool

Most of it seems to occur when turning my wifi on and off, but it's happened plenty of other times right after booting as well. I have attached the diagnostic tool files ...

View 5 Replies View Related

Network / Sharing :: One WiFi Connection - Multiple Profiles - How To Avoid

Sep 15, 2014

I use my cell phone for internet access on my laptop, since it can act as a portable wifi access point.

The problem I'm having is that every time I connect, Windows 8.1 creates a new profile. So I started with "Phone access point", then I got "Phone access point 2" on the second connection, "Phone access point 3" on the third connection, and so on and so on, creating a new profile every time I connect.

Is there any way I can tell Windows 8.1 to use the same network profile whenever it connects to "Phone access point", since it's the same connection as it was last time. It does it correctly for all the other wifi access points I connect to: home, work,, the only one that's causing a problem is the phone's connection.

View 1 Replies View Related

Hardware Drivers :: Asus Z97 Pro - USB Devices Seen In BIOS But Not In Windows 8.1

Jun 6, 2014

I have recently built a new computer and installed Windows 8. All was running fine (including USB devices such as iPhone, flash drive etc), however since upgrading to Windows 8.1, none of my USB devices are showing up at all. Oddly, the mouse and keyboard still work.

When I go into the BIOS, all my devices (iPhone, Flash drive, keyboard and mouse etc) all show up in there, so I'm guessing it's a driver/Windows 8.1 issue that I'm missing?

I have been to the ASUS website and downloaded all the drivers I can find, but still no luck.

My motherboard is an "Asus Z97 Pro". I have tried contacting Asus support, but they are completely useless!

View 9 Replies View Related

Hardware Drivers :: Windows 8.1 Upgrade - Devices No Longer Listed

Oct 20, 2013

After upgrading to 8.1 all of my previously listed devices are no longer listed under devices... in fact there are no devices listed. I can also not add a device. If I look in device manager they are listed there and if I go to print the printer shows up and I can print. The screenshot below shows what I see when I open "Devices and Printers" in control panel. The biggest issue is not being able to add devices like Bluetooth speaker.

View 6 Replies View Related

Hardware Drivers :: Windows 8 PC Doesn't Recognize USB Ported Devices

Jun 7, 2014

I have run into a problem with my Windows 8 computer once in a while, it's that my PC doesn't recognize USB ported devices as supposed to, but it does recognize things such as a wireless mouse and keyboard. Now, my question is, can I buy a wired Xbox 360 controller and connect it to my computer, and trust it to download the drivers correctly, and work like it's supposed to? I have got a new game, and really want the controller to work for it.

View 2 Replies View Related

Hardware Drivers :: WAN Miniport Devices Have Yellow Exclamation Mark In Windows 8

Sep 11, 2012

After I upgraded my windows 7 to windows 8 pro I had this problem . There are four devices that have a yellow exclamation mark showing in the Device manager.

They are WAN Miniport (IKEv2 / L2TP/PPTP/SSTP)

All of them show this error: This device is not working properly because Windows cannot load the drivers required for this device. (Code 31)

I don not know what these devices do or how to fix it .. I have also problem in Merto apps they cannot connect to the internet even though I can browse and download .. I do not know if those WAN Miniport devices cause this problem.

View 2 Replies View Related

Hardware Drivers :: HTPC Server / Windows 8.1 - Wireless Devices Range Dropped

Aug 23, 2014

I just recently bought a new HTPC server and installed Windows 8.1 on it. Everything seems to work great except my USB mouse and keyboard. The range of these wireless devices dropped to just about one meter. They work further away if I lift them high in the air but from waist level they only work from very close ranges. Before they used to work perfectly from distances up to 5 meters.

What's odd is that the USB recievers are in the exact same spots as they were in my old computer. I have an extender cable and a hub so there are no obstacles between the recievers and the devices. I'm not sure whether this is because of Windows 8 or because of the new hardware. My previous computer was a laptop running Win7 but the new one is a desktop. The devices seemed to work bad even in BIOS so I suspect it's the hardware.

I have installed latest drivers, replaced batteries and tried different positions for the recievers but nothing seems to fix this issue. I have not added any new wireless devices in the household.

Keyboard: Microsoft Wireless Keyboard 3000 v2
Mouse: Logitech M505 Wireless Mouse

System:
Intel i3 4150
4GB DDR3
Asus H97I PLUS M-ITX
500W
Windows 8.1 x64

Previous system:
Intel i3 350M
3GB DDR3
Dell Vostro 3300 laptop motherboard
Windows 7 x64

View 3 Replies View Related

Hardware Drivers :: USB Ports Do Not Recognize Some Devices

Jul 8, 2014

My usb ports do not recognize some devices. Sometimes when I plug one device another one is unplugged., some times a specific usb port works, sometimes it doesn't. eg: when i unplug the mouse nw and plug it again it will stop working. if i plug another device eon a different usb port the mouse is disconnected. I went to control panel devices Manger and uninstalled every usb port and enable it again with no results.

View 2 Replies View Related

Hardware Drivers :: USB Devices Not Entering Selective Suspend

Aug 10, 2014

My power efficiency report is telling me that none of my USB hubs and devices are entering selective suspend.

View 1 Replies View Related

Hardware Drivers :: New HP Officejet Pro 8620 Does Not Appear In Devices And Printers

Jul 29, 2014

I have recently purchased a new HP Officejet Pro 8620 and am currently having problems actually using it.

I have already installed the full-feature driver from the HP website but the printer does not appear in devices and printers. However my printer does appear in print dialog and the device manager. I have tried adding the printer through devices and printers but it has no effect.

When I try to print anything through print dialog or any application for that matter no print job is sent. Basically I can't print anything from my computer now.

I have already re-installed the driver multiple times only to come up with similar results. This is for my main computer which is a HP Envy dv7. Also I have connected to the printer via the wireless router option.

However for my second computer which is a Dell XPS 12 everything worked fine right from the start which also connected to the printer wirelessly.

View 9 Replies View Related

Hardware Drivers :: USB Devices Take Time To Initialize At Boot

Jul 2, 2014

I have a weird issue in which after a boot of the machine it will take some time for USB devices to become initialized, yes... this includes my USB keyboard and mouse. So essentially even though the system may be up and running at the user logon screen, I have to wait five seconds until I can type my password in on my USB connected keyboard.

View 3 Replies View Related

Hardware Drivers :: USB 3 Devices Disconnecting Esata Ports

Jan 3, 2014

I am having problems with USB 3 devices disconnecting and reconnecting all the time when they are plugged into the Esata ports on the back of the motherboard in my sig. The USB 3 devices work ok in the normal USB 2 and 3 ports on the motherboard but I am not sure why they are not working in the Esata ports? I'm running Windows 8.1 with all the latest drivers and I am also running the BIOS f7e provided by Gigabyte to see if this would resolve the issue but it's not worked. If I connect USB 2 devices to the Esata ports they work ok, but could they possibly be faulty as they are not working correctly with USB3 devices?

View 4 Replies View Related

Hardware Drivers :: USB Ports Don't Detect Connected Devices?

Apr 22, 2014

Whenever I try to connect my flash drive, phone or digi cams. It can't detect anything then I saw this in device manager, is this the culprit?

View 1 Replies View Related

Hardware Drivers :: Computer Needs Restart For USB Devices To Recognize

Feb 9, 2014

I'm having an issue where if my USB devices are plugged in when i start my computer they are fine. but if i try to plug in a thumbdrive after it's already been turned on it won't recognize it. nothing.

Just Ran the SFC /scannow and i don't know what to make of it. it is attach The Attached file has the SFC details. not sure what to make of it.

Running
Windows 8.1 x64
Gygabyte: z68a-d3h-b3
(will attach more if needed.)

View 1 Replies View Related

Hardware Drivers :: New Printer Missing In Devices And Printers In Win 8.1

May 23, 2014

New printers do not display in Windows 8.1 Devices and Printers (no icon):

New Dell, clean install:

- Reinstalled Dell Factory Image
- Updated to Windows 8.1
- Installed Office 2013
- Added BUILT-IN Windows Driver for LaserJet 5P/5MP
- Added Epson driver for Windows 8 64 bit from Epson website
Neither printer shows in Devices and Printers.

Rebooted. Stopped and started print spooler. Checked registry and all printers, including the new ones, appear to be listed in all the correct registry areas.

Open Notepad, select Print, both printers are listed.

Both printers print. When in Notepad, select Print, I can right click on the printer, select properties, and control the printer, print test pages, change drivers and preferences, etc.

The ONLY PROBLEM is the printers do not show in Devices and Printers, so I cannot control them from there.

View 9 Replies View Related

Hardware Drivers :: External Devices Won't Show Up On Computer

Sep 15, 2014

I have a Dell Inspiron 660 PC w/windows 8.1 no matter what I plug into the usb port I cannot find it on my computer. I hear the connect/disconnect sound, but can't find anything on the computer as to where it is at or how to open it. The device is a storage device with photos. It also does the same thing with my phone. I hear it, but nothing opens or comes up anywhere.

View 3 Replies View Related

Hardware Drivers :: Slow Population Of Devices / Printers Window?

Jun 29, 2014

When I go toControl Panel -> Hardware and Sound -> Devices and Printersit can take 5 minutes or more to populate the window. A green bar slowly progressing along the top.

Sometimes (not always) when I click on the Network icon it shows an empty window, taking five or more minutes, also with a green bar slowly progressing along the top. EDIT: After I submitted this post I saw that the network window had finally populated. Still, it was incredibly slow and happened after the window showed a message saying "This folder is empty."

If I go to This PC that comes up almost instantly, including the mapped network drives.

View 6 Replies View Related

Hardware Drivers :: External Drive Shows In Devices But Cannot Access

Jan 14, 2014

I have an iomega portable usb drive. I can plug into any of my windows 7 machines and access the files and store data on it. when I put into my win 8 machine it shows in devices and printers and in my computer shows as removable disk but you cannot open it up.

I have went into device manager and tried to update the usb driver installed but no use at all.

really strange that it shows in devices and printers but I cannot get the files.

the thing is I need to install and transfer some backups onto my win 8 machine so I need it to work desperately.

View 1 Replies View Related

Hardware Drivers :: USB3 Devices On Powered USB2 Hubs

Mar 15, 2013

My observation on using a couple of USB3 small passport 2TB self powered disk drives when I connect then to a powered standard usb2 hub is that they perform FAR FASTER than external USB 2 disk drives --especially the self powered small pocket size one's.

So if you are buying external drives --even if you don't have USB3 ports on your machine it's still worth going for the USB 3 drive.

View 1 Replies View Related

Hardware Drivers :: Unexpected Device Appearing In Devices And Printers

Feb 7, 2012

My friend happened to look in Devices and Printers, and in the Multimedia Devices section he had about 10 devices showing up that he never heard of. Six of them were computers with names that he had never heard of, the others were devices that we could not tell what they were.

I expect that these entries mean that at some time they were on the same network that he was on. Would that be correct?

If so, then it is a matter for concern because he never goes on public networks. He only goes on his network at home, and a network in a small office that he rents and shares with one other person. They have their own router with security set up on it, and that router is connected to an Ethernet jack that most likely goes to a switch on a network that also provides internet service to some other offices in the same building.

This computer is only about 2 months old, so these entries can't be too old.

When I looked at his computer, he was on his home network and all those other devices showed as Offline. I right clicked on them all and removed them. Would it be a good guess that perhaps the security of the network at his office was compromised, and those devices were connected to that network at some point?

I told him to monitor and see when they reappear, but he won't be back in that office for 2 weeks.

View 3 Replies View Related

Hardware Drivers :: Win 8 Update - Audio Devices No Longer Working

Dec 15, 2013

I recently switched my pc from 2 AMD cards to 2 Nvidia cards, when i was preparing to install the 2 cards, i shut down my computer, during the shutdown it asked me to update and shutdown win 8 which i did. ever since i did that my audio devices are not detecting.. nothing i do is working.

When i use my plug and play speakers, they are not recognized... let me rephrase.. in the playback devices menu they show up as "Speakers" as they always have, then quickly disappear, then show up again, then disappear again, then back and forth over and over and over again..... i tried uninstalling my audio drivers and reinstalling. this did not work. i can get sound with the speakers, by just pluggin them into my TV, but i cant control the audio or the 5.1 surround from the tv, it just shows them as stereo...

Asus Sabretooh 990 fx R2
AMD 4.3 vishera FX 8 core
GTX 780Ti (primary)
GTX 480 Superclocked (dedicated physx)
850 modular psu
16GB GDDR3 g.skill

i never had this problem until A) new cards, and B) installed the win 8 update... But i rolled my computer back to a date before that update, and then turned updates off in case that was it..

i've also tried installing drivers directly from realtek, directly from my motherboard website. i've uninstalled and reinstalled, and stopped windows from auto installing during my realtek installs on the drivers...

just cant figure out why it flickers like that, the speakers work fine in other devices (e.g the tv).

Here is a screenshot of when i try to download drivers, i get an error 0xE0000247....

And a pic of my device manger

View 2 Replies View Related

Hardware Drivers :: Prevent Opening Devices And Printers On Device Plugin

Jan 19, 2014

Every time I plugin a device (Memory card, Cell phone etc.) Windows 8.1 automatically opens Devices and Printers which is very annoying. I set Autoplay to "Take no action" but in vain. How can I disable this behavior?

View 9 Replies View Related

Hardware Drivers :: Devices And Printers Menu Takes Forever To Load

Dec 12, 2013

For some reason the green bar goes all the way across the top of the screen before the devices and printers menu will load. In then loads without an issue after waiting for almost two full minutes. This is a core I7 Win 8.1 PC with 16GB of ram and an SSD so it screams otherwise.

I do have a lot of devices on my home network but my windows 7 PC which is on the same network loads the devices and printers menu almost instantly. If it were a device hanging up you would think that the Windows 7 PC would also be affected but it isn't. I will say that Windows 8.1 does identify a whole lot more devices that fall into the category of "multimedia devices" on the network than does windows 7.

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved