Hardware Drivers :: Devices And Printers Menu Takes Forever To Load
Dec 12, 2013
For some reason the green bar goes all the way across the top of the screen before the devices and printers menu will load. In then loads without an issue after waiting for almost two full minutes. This is a core I7 Win 8.1 PC with 16GB of ram and an SSD so it screams otherwise.
I do have a lot of devices on my home network but my windows 7 PC which is on the same network loads the devices and printers menu almost instantly. If it were a device hanging up you would think that the Windows 7 PC would also be affected but it isn't. I will say that Windows 8.1 does identify a whole lot more devices that fall into the category of "multimedia devices" on the network than does windows 7.
View 9 Replies
ADVERTISEMENT
Oct 19, 2013
I just updated my computer from Windows 8 to 8.1 (via Store), and my computer is working fine except for the right-click menu on the Desktop, that is taking forever to load.
First I thought it was some problematic shell extension (specially because Intel Graphics Control Panel was also updated, and the new version had icons along to the options). So I run ShellExView and disabled the mentioned extension, but the problem was still there after I restarted my computer.
Weird thing is that the problem only occurs when I click on a "empty" place on the Desktop, but clicking on icons on the desktop, or wherever else is OK. It's also weird that it occurs both when I'm on the Desktop or when I'm on File Explorer, accessing C:users*username*desktop (it's also weird that, when I'm using File Explorer, sometimes, some desktop icons, such as my shortcuts and folders, disappear).
I am adding some screenshots with the shell extensions found.
View 1 Replies
View Related
Feb 23, 2014
I just purchased a asus laptop it has windows 8 and takes forever to load anything slow connecting to internet ; web pages anything it just crawls.
View 2 Replies
View Related
Jun 4, 2014
My friend happened to look in Devices and Printers, and in the Multimedia Devices section he had about 10 devices showing up that he never heard of. Six of them were computers with names that he had never heard of, the others were devices that we could not tell what they were.
I expect that these entries mean that at some time they were on the same network that he was on. Would that be correct?
If so, then it is a matter for concern because he never goes on public networks. He only goes on his network at home, and a network in a small office that he rents and shares with one other person. They have their own router with security set up on it, and that router is connected to an Ethernet jack that most likely goes to a switch on a network that also provides internet service to some other offices in the same building.
This computer is only about 2 months old, so these entries can't be too old.
When I looked at his computer, he was on his home network and all those other devices showed as Offline. I right clicked on them all and removed them. Would it be a good guess that perhaps the security of the network at his office was compromised, and those devices were connected to that network at some point?
I told him to monitor and see when they reappear, but he won't be back in that office for 2 weeks.
View 4 Replies
View Related
Jul 29, 2014
I have recently purchased a new HP Officejet Pro 8620 and am currently having problems actually using it.
I have already installed the full-feature driver from the HP website but the printer does not appear in devices and printers. However my printer does appear in print dialog and the device manager. I have tried adding the printer through devices and printers but it has no effect.
When I try to print anything through print dialog or any application for that matter no print job is sent. Basically I can't print anything from my computer now.
I have already re-installed the driver multiple times only to come up with similar results. This is for my main computer which is a HP Envy dv7. Also I have connected to the printer via the wireless router option.
However for my second computer which is a Dell XPS 12 everything worked fine right from the start which also connected to the printer wirelessly.
View 9 Replies
View Related
May 23, 2014
New printers do not display in Windows 8.1 Devices and Printers (no icon):
New Dell, clean install:
- Reinstalled Dell Factory Image
- Updated to Windows 8.1
- Installed Office 2013
- Added BUILT-IN Windows Driver for LaserJet 5P/5MP
- Added Epson driver for Windows 8 64 bit from Epson website
Neither printer shows in Devices and Printers.
Rebooted. Stopped and started print spooler. Checked registry and all printers, including the new ones, appear to be listed in all the correct registry areas.
Open Notepad, select Print, both printers are listed.
Both printers print. When in Notepad, select Print, I can right click on the printer, select properties, and control the printer, print test pages, change drivers and preferences, etc.
The ONLY PROBLEM is the printers do not show in Devices and Printers, so I cannot control them from there.
View 9 Replies
View Related
Jun 29, 2014
When I go toControl Panel -> Hardware and Sound -> Devices and Printersit can take 5 minutes or more to populate the window. A green bar slowly progressing along the top.
Sometimes (not always) when I click on the Network icon it shows an empty window, taking five or more minutes, also with a green bar slowly progressing along the top. EDIT: After I submitted this post I saw that the network window had finally populated. Still, it was incredibly slow and happened after the window showed a message saying "This folder is empty."
If I go to This PC that comes up almost instantly, including the mapped network drives.
View 6 Replies
View Related
Feb 7, 2012
My friend happened to look in Devices and Printers, and in the Multimedia Devices section he had about 10 devices showing up that he never heard of. Six of them were computers with names that he had never heard of, the others were devices that we could not tell what they were.
I expect that these entries mean that at some time they were on the same network that he was on. Would that be correct?
If so, then it is a matter for concern because he never goes on public networks. He only goes on his network at home, and a network in a small office that he rents and shares with one other person. They have their own router with security set up on it, and that router is connected to an Ethernet jack that most likely goes to a switch on a network that also provides internet service to some other offices in the same building.
This computer is only about 2 months old, so these entries can't be too old.
When I looked at his computer, he was on his home network and all those other devices showed as Offline. I right clicked on them all and removed them. Would it be a good guess that perhaps the security of the network at his office was compromised, and those devices were connected to that network at some point?
I told him to monitor and see when they reappear, but he won't be back in that office for 2 weeks.
View 3 Replies
View Related
Jan 19, 2014
Every time I plugin a device (Memory card, Cell phone etc.) Windows 8.1 automatically opens Devices and Printers which is very annoying. I set Autoplay to "Take no action" but in vain. How can I disable this behavior?
View 9 Replies
View Related
Apr 5, 2014
I built a very high-spec gaming PC last August and installed Windows 8. I upgraded to 8.1 later and did not experience any problems until I needed to reinstall Windows 8.1 in February in order for USB devices to function properly (restoring or refreshing Windows 8.1 wasn't an option because that function is currently broken (sort it out Microsoft!!))
Since then, a unique problem seems to have developed. My CPU is an Intel-4770k, so when I first boot up the PC from shut down, or when I press the hard restart button on my computer case, the computer boots up very quickly and with no problems. However, when I click 'Restart' from Windows, the interface shuts down, and my PC remains active, but nothing else happens for a good 2 or 3 minutes. After that time, I see two red LEDs on my motherboard flash (I guess that is the PC posting) and the computer starts up.
I am clueless as to why the Restart function has such a massive delay. I followed the steps on one thread which told me to go into msconfig and disable all start-up applications and to do the same in task manager, but after doing so and restarting my PC, the problem persisted. (The thread : [URL] .... )
View 19 Replies
View Related
Jan 2, 2014
I have Windows 8. Received a Toshiba Satellite p875 last year for Christmas. Recently when I shut down my laptop it goes into "installing update" mode, only it does not install anything. It will stay in this mode for hours or until I physically shut it off.
View 2 Replies
View Related
Aug 2, 2013
Recently my pc has taken forever to boot up. A black screen hangs there for about 5-9 minutes before opening up in Windows 8.
I thought a virus was there so did a full scan using Kaspersky Internet Security 2013, nothing found.
I haven't d/l'd any new software recently.
I have tried to upload music to my micro SD card from my iphone, but the icon in My Computer is not showing, not in Device manager either.
Don't know if they are related but the problem started just after the above incident.
View 5 Replies
View Related
Jul 14, 2013
I have a Dell Inspiron laptop that I had to restore to the factory Dell settings recently. After formatting the hard drive and re-installing windows 8 I noticed that the computer name in the devices and printers panel was Dell, Inc. instead of the computer name that I put in when re-installing windows. Is there a way to change the computer name in the devices and printers panel so that it matches the computer name in the system panel? I can change the computer name by going into the system panel but that doesn't change the name in the devices and printer panel.
View 9 Replies
View Related
Nov 28, 2013
My PC boots up in 10-15 seconds, but then it sits at my desktop with everything functional for about 10-15 minutes before my startup items (Battle.net, Spotify, DNSCrypt, etc.) actually start loading up. Even after the items have loaded up, Windows Update continues to tell me that the service is not loaded and that I should reboot. I have downloaded the .zip from the forums including all the default services reg files, ran them all to return to default, even ran Tweaking.com Windows Repair, still the same issue.
View 1 Replies
View Related
Aug 19, 2014
I am currently running Windows 8.1 (Pro), also I am up-to-date with Windows Updates. Sometimes, when I open File Explorer (a.k.a. Windows Explorer), like "This PC". It says "This folder is empty", it then starts some-kind of searching, also icons on the left are animated like "searching". There is another one, it also takes time to sort files/folders orders, for example when I am in C:New Folder and there are 5 folders and 5 files inside, none big sized at all. When I click on "Name" it then takes time to reorder the view.
Another thing is while I experienced these issues, I found another one that is. View>Layout sometimes gets disabled and I can't change the view. View>Options button behaves the same.
View 9 Replies
View Related
Jun 16, 2014
When ever it try to open any folder in my computer its shows folder is empty even it has files in it then on task bar green ribbon runs for some time and then it shows files in folder...this wont be happening someday ago but now m getting this problem...hard drive test shows it is working fine
View 4 Replies
View Related
Sep 15, 2014
I have had my Windows 8.1 Pro x64 install since February. Now I think it is time to deal with this once and for all.
I have an extremely powerful computer, 3930k, 64gb ram, RIVE, 840 Pro SSD so hardware is not the problem.
I recently got another Windows 8 (enterprise) laptop (not 8.1) to compare with, and it boots at exactly the same time as my desktop, but the laptop loads all startup items within 1-3 sec, but my desktop takes as said 1 minute and 20 seconds each time.
I have used this guide and many similar: Startup Delay Time - Reduce in Windows 8
I once changed the value to 10 minutes in milliseconds, and it took 10 minutes, but when I change to 0 milliseconds, or lets say 1000 ms for 1 second, it still takes 1 min and 20 seconds.
On my laptop I can change the value StartupDelayInMSec however I want and it will work, but I cannot have it low on my desktop and make it launch all startup items below 1 min and 20 sec.
View 5 Replies
View Related
Jun 21, 2014
I have a 500 gig internal drive i use as backup. at times when i click on it it takes 4/5 secs for all the folders to load. other times immediate.
View 3 Replies
View Related
Oct 13, 2013
So after using google chrome for about a year and having no problems whatsoever, just today I encountered one where the initial startup takes a very long time about 10-15 minutes, and this is only on initial launch, as when I keep chrome open any new chrome windows I launch load normally which is nearly instantly. I have done every procedure here Google Groups though not separately and it still takes an incredibly long time for chrome to load on initial launch.
View 8 Replies
View Related
Oct 13, 2013
How to fix Chrome as it is taking an unusually long time to load. It started just today a few hours ago when I logged into Facebook here in my laptop, I normally don't use it in my laptop as I just use it on my phone mainly and have a desktop at school where I submit my school files early to avoid submitting them on my laptop. But when I was forced to submit at home and use Facebook on my laptop to submit my files, Chrome then starts taking a very long time to load, about 10-15 minutes. It isn't an internet problem as were getting a pretty average 7 mbps, and strange thing is IE is working well and fine. Tried doing some research and some suggested it was a firewall issue but I doubt it, as I never tweak my antivirus settings. I tried this When Google Chrome won't start up | Computerworld Blogs but couldn't continue as I seem to be missing the debug.log mentioned and so couldn't make sure if I was having the same problem, so pretty lost at the moment.
After the 15 minute wait for chrome to open, and while I STILL have the browser open, opening new Chrome windows is then back to normal. But soon as I close my Chrome windows I then have to wait lots again. And it seems no matter how many shortcuts I try to open, I remember I clicked Chrome about 20 times it only always opens just 2 Chrome windows
View 2 Replies
View Related
Sep 23, 2012
I have two network printers, a HP 1006 that is shared off my Windows Home Server and a Brother 2070N that is shared from another Dell PC running Windows 7. I can print to these shared printers from every other PC attached to my home LAN but the Windows 8 PC. I cannot add drivers but I can "see" both printers when I go to Control Panel and try to add the printers. Trouble with printing?
View 3 Replies
View Related
Oct 5, 2013
My pc shut off today all of a sudden, it was running normally, and next time power on windows would not start up normally. the power turn on as normal, windows 8 blue logo show up with circle running for 3 seconds, then screen would show a sign losing signal from monitor, then screen would turn dark, nothing going on, power still on, no beep, no sound or anything.
I am running windows 8 retail with license bought from Microsoft on ssd, and windows 8.1 enterprise rtm on a separate drive. Normally there are 2 items on blue boot menu.
I managed to log into safe mode, everything is still there, icons and files, installed software. I checked boot record and there are still same as before.
View 3 Replies
View Related
Jun 22, 2014
I've just set up a clean system installation (Win 8.1 PRo x64). As a part of it I obviously installed my printer driver. The printer is Lexmark E260d and I use Lexmark Universal Driver downloaded directly from Lexmark's webpage.
My surprise is that after installation I have two such printers available at my system:
- "Lexmark E260" - which is the name I gave during installation,
- "Lexmark International Lexmark E260d" - which is another device appearing as a printer.
Both drivers / devices (?) print correctly yet I can see some differences in their functionality descriptions, when choosing Properties / Hardware. Lexmark E260 device has there "Print queues" only while Lexmark International... device has three types "Printers", "Print queues" and "Universal Serial Bus controllers". Another thing is when I double click on devices icons in "Devices and Printers" window - Lexmark E260 brings well-known list of documents actually being printed and Lexmark International... brings printer configuration dialog allowing to see printing documents, customize printer setting and so on.
Why I have somehow two different printers appearing on my system? Should I remove one of them and which? How can I avoid duplicating devices when installing drivers?
View 7 Replies
View Related
Jul 22, 2013
Our customer has recently upgraded Windows server from 2003 to 2008.
In new server, we saw that network printer's definition in registry is in the format of 'Printer on Server', while in old server the printer format was mainly 'ServerPrinter' (although the 'Printer on Server' format existed there too).
So due to this change in printer 'format', we need to modify our software to recognize the new format.
How does windows determines which format to use in printer definition? Is there a way to switch between formats?
(Note: I refer to printer definition under HKEY_CURRENT_USERSoftwareMicrosoftWindows NTCurrentVersionDevices registry key) ...
View 4 Replies
View Related
Jul 8, 2014
My usb ports do not recognize some devices. Sometimes when I plug one device another one is unplugged., some times a specific usb port works, sometimes it doesn't. eg: when i unplug the mouse nw and plug it again it will stop working. if i plug another device eon a different usb port the mouse is disconnected. I went to control panel devices Manger and uninstalled every usb port and enable it again with no results.
View 2 Replies
View Related
Aug 10, 2014
My power efficiency report is telling me that none of my USB hubs and devices are entering selective suspend.
View 1 Replies
View Related
Jul 2, 2014
I have a weird issue in which after a boot of the machine it will take some time for USB devices to become initialized, yes... this includes my USB keyboard and mouse. So essentially even though the system may be up and running at the user logon screen, I have to wait five seconds until I can type my password in on my USB connected keyboard.
View 3 Replies
View Related
Jan 3, 2014
I am having problems with USB 3 devices disconnecting and reconnecting all the time when they are plugged into the Esata ports on the back of the motherboard in my sig. The USB 3 devices work ok in the normal USB 2 and 3 ports on the motherboard but I am not sure why they are not working in the Esata ports? I'm running Windows 8.1 with all the latest drivers and I am also running the BIOS f7e provided by Gigabyte to see if this would resolve the issue but it's not worked. If I connect USB 2 devices to the Esata ports they work ok, but could they possibly be faulty as they are not working correctly with USB3 devices?
View 4 Replies
View Related
Apr 22, 2014
Whenever I try to connect my flash drive, phone or digi cams. It can't detect anything then I saw this in device manager, is this the culprit?
View 1 Replies
View Related
Jun 6, 2014
I have recently built a new computer and installed Windows 8. All was running fine (including USB devices such as iPhone, flash drive etc), however since upgrading to Windows 8.1, none of my USB devices are showing up at all. Oddly, the mouse and keyboard still work.
When I go into the BIOS, all my devices (iPhone, Flash drive, keyboard and mouse etc) all show up in there, so I'm guessing it's a driver/Windows 8.1 issue that I'm missing?
I have been to the ASUS website and downloaded all the drivers I can find, but still no luck.
My motherboard is an "Asus Z97 Pro". I have tried contacting Asus support, but they are completely useless!
View 9 Replies
View Related
Feb 9, 2014
I'm having an issue where if my USB devices are plugged in when i start my computer they are fine. but if i try to plug in a thumbdrive after it's already been turned on it won't recognize it. nothing.
Just Ran the SFC /scannow and i don't know what to make of it. it is attach The Attached file has the SFC details. not sure what to make of it.
Running
Windows 8.1 x64
Gygabyte: z68a-d3h-b3
(will attach more if needed.)
View 1 Replies
View Related
