Backup Drive Takes 4/5 Secs For All The Folders To Load When Clicked
Jun 21, 2014I have a 500 gig internal drive i use as backup. at times when i click on it it takes 4/5 secs for all the folders to load. other times immediate.
View 3 RepliesI have a 500 gig internal drive i use as backup. at times when i click on it it takes 4/5 secs for all the folders to load. other times immediate.
View 3 RepliesI am currently running Windows 8.1 (Pro), also I am up-to-date with Windows Updates. Sometimes, when I open File Explorer (a.k.a. Windows Explorer), like "This PC". It says "This folder is empty", it then starts some-kind of searching, also icons on the left are animated like "searching". There is another one, it also takes time to sort files/folders orders, for example when I am in C:New Folder and there are 5 folders and 5 files inside, none big sized at all. When I click on "Name" it then takes time to reorder the view.
Another thing is while I experienced these issues, I found another one that is. View>Layout sometimes gets disabled and I can't change the view. View>Options button behaves the same.
When ever it try to open any folder in my computer its shows folder is empty even it has files in it then on task bar green ribbon runs for some time and then it shows files in folder...this wont be happening someday ago but now m getting this problem...hard drive test shows it is working fine
View 4 Replies View RelatedI have had my Windows 8.1 Pro x64 install since February. Now I think it is time to deal with this once and for all.
I have an extremely powerful computer, 3930k, 64gb ram, RIVE, 840 Pro SSD so hardware is not the problem.
I recently got another Windows 8 (enterprise) laptop (not 8.1) to compare with, and it boots at exactly the same time as my desktop, but the laptop loads all startup items within 1-3 sec, but my desktop takes as said 1 minute and 20 seconds each time.
I have used this guide and many similar: Startup Delay Time - Reduce in Windows 8
I once changed the value to 10 minutes in milliseconds, and it took 10 minutes, but when I change to 0 milliseconds, or lets say 1000 ms for 1 second, it still takes 1 min and 20 seconds.
On my laptop I can change the value StartupDelayInMSec however I want and it will work, but I cannot have it low on my desktop and make it launch all startup items below 1 min and 20 sec.
I just updated my computer from Windows 8 to 8.1 (via Store), and my computer is working fine except for the right-click menu on the Desktop, that is taking forever to load.
First I thought it was some problematic shell extension (specially because Intel Graphics Control Panel was also updated, and the new version had icons along to the options). So I run ShellExView and disabled the mentioned extension, but the problem was still there after I restarted my computer.
Weird thing is that the problem only occurs when I click on a "empty" place on the Desktop, but clicking on icons on the desktop, or wherever else is OK. It's also weird that it occurs both when I'm on the Desktop or when I'm on File Explorer, accessing C:users*username*desktop (it's also weird that, when I'm using File Explorer, sometimes, some desktop icons, such as my shortcuts and folders, disappear).
I am adding some screenshots with the shell extensions found.
For some reason the green bar goes all the way across the top of the screen before the devices and printers menu will load. In then loads without an issue after waiting for almost two full minutes. This is a core I7 Win 8.1 PC with 16GB of ram and an SSD so it screams otherwise.
I do have a lot of devices on my home network but my windows 7 PC which is on the same network loads the devices and printers menu almost instantly. If it were a device hanging up you would think that the Windows 7 PC would also be affected but it isn't. I will say that Windows 8.1 does identify a whole lot more devices that fall into the category of "multimedia devices" on the network than does windows 7.
I just purchased a asus laptop it has windows 8 and takes forever to load anything slow connecting to internet ; web pages anything it just crawls.
View 2 Replies View RelatedSo after using google chrome for about a year and having no problems whatsoever, just today I encountered one where the initial startup takes a very long time about 10-15 minutes, and this is only on initial launch, as when I keep chrome open any new chrome windows I launch load normally which is nearly instantly. I have done every procedure here Google Groups though not separately and it still takes an incredibly long time for chrome to load on initial launch.
View 8 Replies View RelatedHow to fix Chrome as it is taking an unusually long time to load. It started just today a few hours ago when I logged into Facebook here in my laptop, I normally don't use it in my laptop as I just use it on my phone mainly and have a desktop at school where I submit my school files early to avoid submitting them on my laptop. But when I was forced to submit at home and use Facebook on my laptop to submit my files, Chrome then starts taking a very long time to load, about 10-15 minutes. It isn't an internet problem as were getting a pretty average 7 mbps, and strange thing is IE is working well and fine. Tried doing some research and some suggested it was a firewall issue but I doubt it, as I never tweak my antivirus settings. I tried this When Google Chrome won't start up | Computerworld Blogs but couldn't continue as I seem to be missing the debug.log mentioned and so couldn't make sure if I was having the same problem, so pretty lost at the moment.
After the 15 minute wait for chrome to open, and while I STILL have the browser open, opening new Chrome windows is then back to normal. But soon as I close my Chrome windows I then have to wait lots again. And it seems no matter how many shortcuts I try to open, I remember I clicked Chrome about 20 times it only always opens just 2 Chrome windows
I've now optimized my remaining Windows XP system --removed all the junk and duplicate programs which run on later versions of Windows so I've got a nice small tidy XP system -- basically Scanner (old canon photo scanner N1240), some VINYL editing and cutting software, OCR software, Minidisc software (still great for portable RECORDING !!) and an HP plotter and one or two odd programs. I don't need Photoshop or office any more in the XP system nor Ms Office, and I don't bother with the Internet on it either so no security problems there.
I've kept connectivity for printing (Epson 1400 printer) - the whole OS is 12 GB and it boots up in about 2 Secs (a VM running from a Linux host) --I've allocated it 1 GB - I'm sure I could run it in 768 MB too.
On my 8GB laptop it runs fine concurrently with a Windows 8.1 VM (allocated 4GB RAM for that) both on a Linux Host.
My Toshiba Satellite Laptop has Windows 8. For some reason windows 8 wont load. It gets to the screen where you select which username you want. But from there its non responsive, I cant get into Windows, I cant restart to load it up in safe mode.
I got a Windows 8 disk which I had to change the bios to load it up. The cd loads but it says the automatic repair wont repair the laptop. I try to refresh windows 8 but I get a message saying the drive where windows is installed is locked. unlock the drive and try again. It also wont let me use system restore.
I try to use the reset pc option but I get a message saying unable to reset your pc, a required drive partition is missing.
At the start it gives me the option to install windows 8, I don't know whether to just do that? Is it ok to do with windows 8 already installed?
I had a windows 7 laptop which finally died but before it did a made a system image backup to my external hard drive so I have all the files. How do I load that onto my new windows 8.1 laptop so I have all my files there?
View 4 Replies View RelatedI have two Internal Hard disks in my system. First one is partitioned and used for system. i don't have problem on this hard disk. My second hard disk is 500 GB, and is not partitioned. I m using this drive for storing movies and music. The problem I faced is two of the folders are missing from this drive. THese two folders have several files. All other folders and files are intact. I just checked hard disk's used space and found to be 463 GB. I then selected all folders and viewed the combined spaces(including hidden and system folders) and I found it to be 389 GB only. Where are my these two folders? How can I retrieve it? Where is (463-389=74 GB) of space which is included in drive's "Used Space" metrics.
My Computer is running on Windows 8
I have 2 PC's. Both are now running Windows 8. The main PC was running Windows 7 and I there mapped a network drive (z to the Windows 8 PC. It worked very nice. The second PC was also shown in "networks" in "my Computer" right after boot of Main PC. So network for sharing is set up properly on second PC.
After installing Windows 8 on main PC, it is still working, but the time spend waiting for the network drive is waaaaay longer now. The name of second PC "Photo-PC", is shown right after boot, but when I first click on the name, and get this error:
Networkpath not found. Errorcode 0x80070035
If I then wait about 20-30 seconds and then click again on "Photo-PC" then I have access to all shared drives, included my mapped network drive Z:
How can I eliminate this 20-30 seconds delay after boot?
I have given up setting up a homegroup, never had it to work, but "oldfashioned" network drives used to work
EaseusToDo backup gives me the following error. I use security tab to allow access to everyone and still get this error. Can I run the backup in the built in admin account? I have tried system backup and Disk and Partition backup and get the same error message. This is an hd in an enclosure with a sata connection.
View 9 Replies View RelatedEvery time I start my computer and I click on an icon (on the desktop or in the Start menu), the icon disappears and this error message shows up about a dozen times:"Could not find this item. This is no longer in C:...Verify this item's location." And that things (ex- documents, my computer icon, movie, song) go to Recycle Bin. And when i select bunch of file by pressing CTRL+A, then it shows option for delete automatically. I am using ASUS K46 Series laptop with windows 8.
In my thinking, there might be problem regarding DEL key. I thought that because when i press power button of my laptop instantly boot menu comes ( which come only by pressing DEL key normally). But DEL key looks like normal like other key. There is no tapped or go inside of DEL key.
Several weeks ago I installed a remote hard drive. I am using it to store automatic system backups.
In the last few days I have been notified that the drive is full.
I am using 245GB on my primary (C:) drive.
The remote backup drive has a 1TB capacity.
It's somewhat surprising to be told that drive is full. Opening the drive to look at the files, there is a long list of subfolders under the folder labelled "Backup". One has a long, arcane number, and the other sub-sub folders seem to be daily updates named C/Users/My Name/ and from one to four sub sub sub folders or file names. Clicking on the multiple sub folders or the file names causes nothing to happen.
How can I clean this up? I would like to continue to back up my system automatically, but the drive seems to be full of garbage.
Any trick when you single click a item in the nav pane it will expand the tree in both the main and nav pain? The only option seems to be double click (how quaint) or the triangle (3.1 lives!!). Fyi I'm using server r2 2012/classic shell pounded back into win 7 /rant/ god U SUCK ms the feature would be known as "Run Win 8 with legacy shell" the file explorer is straight out of 8 from what I can see.
View 8 Replies View RelatedI was trying to locate some files in my user folders in Windows 8 I was looking for the app data files to restore my email from an old version to a new clean install of the client. I could not find the folder although I knew it existed as this is where the app is storing my email, so I figured it was hidden. I started to look for the setting I knew in 7 that would allow you to see hidden files when you ran the folder properties. The only thing I saw anywhere about hidden files was on the first page of the properties where it says read only and hidden so I checked the box and told it to apply. (I know, stupid thing to do since I did not understand what it was doing. This is so unlike me) Now I do not have any user folders and not much works. How can I restore my user files?
View 3 Replies View RelatedIf I add a SSD (Crucial MX100 CT256MX100SSD1 2.5" 256GB SATA III MLC Internal Solid State Drive). Can I use it as the boot drive as well as the backup drive? Then use the existing 1TB HDD as the main storage drive. I need a backup drive so I figure if this works then it could give me a performance boost as well. How could this best be done to satisfy both needs? Would I put all the programs on the SSD and all the data on the HDD? My current drive is at 119GB used space. How do I determine how much back up space is needed?
View 3 Replies View RelatedI used file history on 8 but since 8.1 upgrade It has stopped backing up my Work Folder or my SkyDrive folder/library, how to add these folders to File History?
View 5 Replies View RelatedI wanna update my pc but the windows 8 update icon wont even open when i click on it.
View 5 Replies View RelatedMy windows apps dont want to open, the store opens shows the brief case logo for a 2-3 seconds and it minimises when i click on it on it to open it again the same thing happens and all other apps dont even respond just their icon move a little on the sides to indicate they are clicked but they don't open at all.
I use windows 8 enterprise and it is activated, it happened before, one way to fix it but its annoying is to create new account and on it they work just fine, but the old one don't.
I can delete and it and recreate it but then i have to register some of my programs again. I read on the internet about that issue so my resolution is not the problem UAC is still on. I use windows defender for antivirus.
I am running windows 8 on a dell xps pc. I have 2 large 3tb and 4tb external seagate drives. After a day or so they lose part of the connection. You can see the drive and folders a couple of levels deep but you can't see files. If you unplug and start again everything is there. On other machines it's not a problem. When you try to eject usb hardware it displays that something is accessing the device. So it's not the drive, it's a driver or something else.
View 14 Replies View RelatedMy buddy wants me to relocate his Documents and Pictures folders (by going to Properties/Location tab/Move on those folders) so that they would be in his Google Drive folder, and thereby backed up automatically to the cloud.
View 9 Replies View RelatedI created the system backup (bit copy) in my Win 8.1 Pro and saved it to my internal HDD.
It is possible to move it now to another drive (e.g. to NAS)?
I try to do this manually, but even though I can open the folder "WindowsImageBackup" and I see several saved files in included folders I cannot manipulate with them.
I just installed Windows 8. I used to have Vista. With Vista I could connect my Seagate external hard drive and then find the Backup function and create a backup. How would I do this with Windows 8?
View 3 Replies View RelatedI have a external drive that I used for backup with XP. What do I need to do to make it work with windows 8? How do I get win to recognize it? It is a IDE drive and is connected via USB.
View 5 Replies View RelatedI'm looking to create a system image of Windows, but my external hard drive already has a bunch of files on the drive. There is plenty of space for the backup, but I'm worried if Windows will format the drive.
View 1 Replies View RelatedWhen I'm on a website that has a link that says"Contact me" or other such words and I click on that link this is what it brings up. I think it started happening since I've installed Windows 8. The only way I can contact the person is to right-click and select "view source" where I can see the email address and then contact the person using that address.
View 6 Replies View RelatedI'm not sure how far reaching this is but I just noticed that when I select a folder and type a file name in the search bar on the right of the address bar, files are found on my backup drive, which is attached by USB to the PC, this drive is attached because it contains other partitions for file storage.
The folder in this case was on the desktop and it shows that it is on C: Drive, but files were found on the H: Drive which is where I run my backup to.
When I un-attach the H drive the files found do not respond to left or right click.