I am currently running Windows 8.1 (Pro), also I am up-to-date with Windows Updates. Sometimes, when I open File Explorer (a.k.a. Windows Explorer), like "This PC". It says "This folder is empty", it then starts some-kind of searching, also icons on the left are animated like "searching". There is another one, it also takes time to sort files/folders orders, for example when I am in C:New Folder and there are 5 folders and 5 files inside, none big sized at all. When I click on "Name" it then takes time to reorder the view.
Another thing is while I experienced these issues, I found another one that is. View>Layout sometimes gets disabled and I can't change the view. View>Options button behaves the same.
When ever it try to open any folder in my computer its shows folder is empty even it has files in it then on task bar green ribbon runs for some time and then it shows files in folder...this wont be happening someday ago but now m getting this problem...hard drive test shows it is working fine
How to fix Chrome as it is taking an unusually long time to load. It started just today a few hours ago when I logged into Facebook here in my laptop, I normally don't use it in my laptop as I just use it on my phone mainly and have a desktop at school where I submit my school files early to avoid submitting them on my laptop. But when I was forced to submit at home and use Facebook on my laptop to submit my files, Chrome then starts taking a very long time to load, about 10-15 minutes. It isn't an internet problem as were getting a pretty average 7 mbps, and strange thing is IE is working well and fine. Tried doing some research and some suggested it was a firewall issue but I doubt it, as I never tweak my antivirus settings. I tried this When Google Chrome won't start up | Computerworld Blogs but couldn't continue as I seem to be missing the debug.log mentioned and so couldn't make sure if I was having the same problem, so pretty lost at the moment.
After the 15 minute wait for chrome to open, and while I STILL have the browser open, opening new Chrome windows is then back to normal. But soon as I close my Chrome windows I then have to wait lots again. And it seems no matter how many shortcuts I try to open, I remember I clicked Chrome about 20 times it only always opens just 2 Chrome windows
I'm running windows 8.1 x64. When I insert a usb flash drive into my PC, it takes maybe over 2 minutes before windows "finds" it and has it appear in windows explorer. I have the latest BIOS for my motherboard and I don't think there are any specific usb drivers to install.
I have had my Windows 8.1 Pro x64 install since February. Now I think it is time to deal with this once and for all.
I have an extremely powerful computer, 3930k, 64gb ram, RIVE, 840 Pro SSD so hardware is not the problem.
I recently got another Windows 8 (enterprise) laptop (not 8.1) to compare with, and it boots at exactly the same time as my desktop, but the laptop loads all startup items within 1-3 sec, but my desktop takes as said 1 minute and 20 seconds each time.
I have used this guide and many similar: Startup Delay Time - Reduce in Windows 8
I once changed the value to 10 minutes in milliseconds, and it took 10 minutes, but when I change to 0 milliseconds, or lets say 1000 ms for 1 second, it still takes 1 min and 20 seconds.
On my laptop I can change the value StartupDelayInMSec however I want and it will work, but I cannot have it low on my desktop and make it launch all startup items below 1 min and 20 sec.
I just updated my computer from Windows 8 to 8.1 (via Store), and my computer is working fine except for the right-click menu on the Desktop, that is taking forever to load.
First I thought it was some problematic shell extension (specially because Intel Graphics Control Panel was also updated, and the new version had icons along to the options). So I run ShellExView and disabled the mentioned extension, but the problem was still there after I restarted my computer.
Weird thing is that the problem only occurs when I click on a "empty" place on the Desktop, but clicking on icons on the desktop, or wherever else is OK. It's also weird that it occurs both when I'm on the Desktop or when I'm on File Explorer, accessing C:users*username*desktop (it's also weird that, when I'm using File Explorer, sometimes, some desktop icons, such as my shortcuts and folders, disappear).
I am adding some screenshots with the shell extensions found.
For some reason the green bar goes all the way across the top of the screen before the devices and printers menu will load. In then loads without an issue after waiting for almost two full minutes. This is a core I7 Win 8.1 PC with 16GB of ram and an SSD so it screams otherwise.
I do have a lot of devices on my home network but my windows 7 PC which is on the same network loads the devices and printers menu almost instantly. If it were a device hanging up you would think that the Windows 7 PC would also be affected but it isn't. I will say that Windows 8.1 does identify a whole lot more devices that fall into the category of "multimedia devices" on the network than does windows 7.
So after using google chrome for about a year and having no problems whatsoever, just today I encountered one where the initial startup takes a very long time about 10-15 minutes, and this is only on initial launch, as when I keep chrome open any new chrome windows I launch load normally which is nearly instantly. I have done every procedure here Google Groups though not separately and it still takes an incredibly long time for chrome to load on initial launch.
Now for the problem when I receive the laptop it was preinstalled with window 8 and on the first boot it took around 5 to 6 mins to boot to desktop..I reinstalled the windows considering it to be the bloatware fault..
The problem gets solved but after i download alienware osd drivers , alienware command center and nvidia drivers the delay is back ..
It starts with a bsod (your pc ran into problem)error window minidump memory.dmp.etc and after that windows boot restart and shutdown after almost 5 to 10 mins..
In the duration of delay there is no hdd activity and after 3 to 5 minutes when the hdd gets actives it boots to desktop in 5 secs..
On my office network none of the computers connected to it have problems surfing the web, except my own. Pages fail to load 75% of the time, I use Google Chrome and Firefox but they both have the same problem. I've scanned my pc for malware and viruses using Malwarebytes and Bitdefender (separately of course) and they've come back clear. I've reset the tcp ip stack (a pain in Windows 8) taking full control of netsh via the regedit key (running it as admin), then wiping the wifi profile, following with a dns flush and finalizing with restarting the computer. Once restarted I can navigate the internet problem free for a few pages and then I go back to having issues. I can't reinstall Windows 8 because I don't have a disc or a partition (upgraded from Win7 to 8 pro online, which I admit was a huge mistake).
I am running on : Windows 8.1 Pro AMD Athlon 2 P320 Dual Core Processor 2.10Ghz 8.00GB RAM, 64 bit OS, x64 processor.
I have 2 PC's. Both are now running Windows 8. The main PC was running Windows 7 and I there mapped a network drive (z to the Windows 8 PC. It worked very nice. The second PC was also shown in "networks" in "my Computer" right after boot of Main PC. So network for sharing is set up properly on second PC.
After installing Windows 8 on main PC, it is still working, but the time spend waiting for the network drive is waaaaay longer now. The name of second PC "Photo-PC", is shown right after boot, but when I first click on the name, and get this error:
Networkpath not found. Errorcode 0x80070035
If I then wait about 20-30 seconds and then click again on "Photo-PC" then I have access to all shared drives, included my mapped network drive Z:
How can I eliminate this 20-30 seconds delay after boot?
I have given up setting up a homegroup, never had it to work, but "oldfashioned" network drives used to work
I'm running Windows 8 and Office 2010. I can't open Excel, Publisher or Powerpoint documents from Windows Explorer or from emails attachments. I can run Word without problem from Windows Explorer.
The files run fine from within the programmes.
An Office window comes up and tells me that the product required is not loaded on this machine. Graphics are attached.
It has a button beside the label saying "I already purchased Office 2010". I click on this button and it asks me to run the installation programme. The following message comes up, "You cannot install the 32 bit version of Office 2010 because you have The 64 bit version installed......"
I have Adobe Reader loaded on my Windows 8 system. If I have a PDF file saved to my local drives I can open it no problem. When I'm in Internet Explorer and click a PDF link, it starts to load then freezes. I have to use the Task Manager to end the process. I've tried both versions 10 and 11 of Adobe Reader but both freeze up.
This is a new HP Desktop PC Intel i7 3820 Processor, running Windows 8
Windows 8 boots up pretty quickly, but it takes a notably long time (compare to Windows 7) for it to show up the system tray applications. In Windows 7 it is almost instant.
Is this Microsoft's problem or the app maker's problem?
Also, the apps seem to load sequentially. Is there a way to rearrange them so that the ones I want load quickly. I need AutoHotKey, Logitech Setpoint and Logitech Gaming Software to load up ASAP. Rest can take their sweet time.
Also this is what the TaskManager's startup performance analysis looks like.
Having this *feature* means that Microsoft can blame the app maker for the slow startup. But why doesn't that happen in Windows 7? Is this because Desktop is another app, and stuff don't really get priority?
Also I still cannot find why PeerBlock would not start when placed in the classic Startup folder.
I am not able to load any pages using Firefox or Internet explorer. I have tried resetting my windsock and itp and it still won't work. I've also tried deleting any 3rd party firewalls I had but that didn't work either. I just got this laptop a week ago too so ya.
I used my BD to load an ISO file and it mounted a CD Drive (F to accomplish that. I know to unmount the drive you need to right click and 'Eject' it. However, my 'Eject' option is greyed out and not available. Until I unmount that drive, I am not able to use my physical Blue Ray Drive. how to accomplish this?
I just purchased a new HP laptop and it has Windows 8 I am a police officer and have access to a program called Coplink normally on other computers I would just type coplink.chattanooga.gov/ in the webpage bar at the top of IE and when hitting enter it downloads it and saves it to desktop then I can just click it anytime and login but it doesnt do that on my new computer I guess because its Windows 8 I cannot get it to save and load it looks like teh file is .JNLP
When in file explorer the zip icon under the share tab is not active. When I click on a simple folder, it does not highlight. If I right click on the folder and go to send to all I get is the dvd drive unless I shift right click first then a drop down of more selections appear but not send to compress. Is this something that need to be activated. I can un-zip a fle from the view tab.
I upgraded my Windows 7 to Windows 8 pro back in November. Windows explorer has always had issues but now I cant open windows explorer (any way) without it crashing and reload. In SAFE MODE it seems to work fine. I have tried disabling all the Services (non MS) and the Startup function but in normal mode but Windows Explorer still crashes.
I'm definitely not the only one experiencing this issue. A quick search online shows other people reporting their Windows 8 explorer frequently crashes. Is there a solution or something I should try to see if it can resolve the issue?
But the problem is, the windows explorer is taking up 20% CPU all time even peaks to 25-30%. when i go to taskmanager and press end-task(windows explorer) the laptops stops making the loud fan-noises and also the CPU usage is back to normal
(i hope the language in the screenshots are no problem) common terms are: beschikbaar = avaible, geheugen = memory, snelheid = speed, in gebruik = usage,
SOLVED: 1) Open C:Windows/Temp 2) Delete all the data 3) Open task manager 4) Terminate explorer.exe 5) Start a new explorer.exe 6) Problem solved.
Some programs are becoming slow to load or do not recognize their connection to a file extension. Most noticeable are Nitro PDF Professional which doesn't always start when I click on a PDF file, sometimes it does, some times it doesn't. Quicken is often slow to start, some times the window opens then it waits for the display, sometimes the there is a wait until the window even opens. Same for xplorer2 opening and even selecting another folder. Going back to Windows 7 with almost the identical installed programs/utilities (about 40) the "problem" goes away.
I have saved numerous files to my hard drive which I am now going back through in trying to put the proper dates that they were made (most of them are audio files; but there are definitely files from every category) and for the most part, I am able to get all of the information that I needed just by right clicking on the file, scrolling down to "Properties" and then selecting the "Details" tab. Nevertheless, for some reason, a good 25-40% of them show a completely inaccurate date. So my question is: any failsafe/foolproof way of finding the correct date in question and on top of that, knowing whether or not that date is actually legitimate; whether that be with the use of some outside program, a command prompt, or some other shortcut?
Windows XP has a delay time of a few seconds when deleting an in-use file. (Example: when an mp3 file is open and you delete that file, Windows XP will say that it is deleting the file for about 3 seconds, then says that it cannot delete the file, since the file is open).
I want to set the settings in Windows 8 to do exactly the same thing. Windows 8's default setting is to immediately state that the mp3 file is in use and cannot delete it. I want Windows 8 to wait for 3 seconds until it states that it cannot delete it.
Reason why I need this option is that I delete the file first, then I change the mp3 file so it is no longer in use. That's the only order of doing this thing that I do.