I have two network printers, a HP 1006 that is shared off my Windows Home Server and a Brother 2070N that is shared from another Dell PC running Windows 7. I can print to these shared printers from every other PC attached to my home LAN but the Windows 8 PC. I cannot add drivers but I can "see" both printers when I go to Control Panel and try to add the printers. Trouble with printing?
View 3 RepliesOur customer has recently upgraded Windows server from 2003 to 2008.
In new server, we saw that network printer's definition in registry is in the format of 'Printer on Server', while in old server the printer format was mainly 'ServerPrinter' (although the 'Printer on Server' format existed there too).
So due to this change in printer 'format', we need to modify our software to recognize the new format.
How does windows determines which format to use in printer definition? Is there a way to switch between formats?
(Note: I refer to printer definition under HKEY_CURRENT_USERSoftwareMicrosoftWindows NTCurrentVersionDevices registry key) ...
I've just set up a clean system installation (Win 8.1 PRo x64). As a part of it I obviously installed my printer driver. The printer is Lexmark E260d and I use Lexmark Universal Driver downloaded directly from Lexmark's webpage.
My surprise is that after installation I have two such printers available at my system:
- "Lexmark E260" - which is the name I gave during installation,
- "Lexmark International Lexmark E260d" - which is another device appearing as a printer.
Both drivers / devices (?) print correctly yet I can see some differences in their functionality descriptions, when choosing Properties / Hardware. Lexmark E260 device has there "Print queues" only while Lexmark International... device has three types "Printers", "Print queues" and "Universal Serial Bus controllers". Another thing is when I double click on devices icons in "Devices and Printers" window - Lexmark E260 brings well-known list of documents actually being printed and Lexmark International... brings printer configuration dialog allowing to see printing documents, customize printer setting and so on.
Why I have somehow two different printers appearing on my system? Should I remove one of them and which? How can I avoid duplicating devices when installing drivers?
I have recently purchased a new HP Officejet Pro 8620 and am currently having problems actually using it.
I have already installed the full-feature driver from the HP website but the printer does not appear in devices and printers. However my printer does appear in print dialog and the device manager. I have tried adding the printer through devices and printers but it has no effect.
When I try to print anything through print dialog or any application for that matter no print job is sent. Basically I can't print anything from my computer now.
I have already re-installed the driver multiple times only to come up with similar results. This is for my main computer which is a HP Envy dv7. Also I have connected to the printer via the wireless router option.
However for my second computer which is a Dell XPS 12 everything worked fine right from the start which also connected to the printer wirelessly.
New printers do not display in Windows 8.1 Devices and Printers (no icon):
New Dell, clean install:
- Reinstalled Dell Factory Image
- Updated to Windows 8.1
- Installed Office 2013
- Added BUILT-IN Windows Driver for LaserJet 5P/5MP
- Added Epson driver for Windows 8 64 bit from Epson website
Neither printer shows in Devices and Printers.
Rebooted. Stopped and started print spooler. Checked registry and all printers, including the new ones, appear to be listed in all the correct registry areas.
Open Notepad, select Print, both printers are listed.
Both printers print. When in Notepad, select Print, I can right click on the printer, select properties, and control the printer, print test pages, change drivers and preferences, etc.
The ONLY PROBLEM is the printers do not show in Devices and Printers, so I cannot control them from there.
Any update resolving the network printers becoming offline. I cannot remove-add the same printers again and again specially for the people i support in our office.
View 4 Replies View RelatedWhen I go toControl Panel -> Hardware and Sound -> Devices and Printersit can take 5 minutes or more to populate the window. A green bar slowly progressing along the top.
Sometimes (not always) when I click on the Network icon it shows an empty window, taking five or more minutes, also with a green bar slowly progressing along the top. EDIT: After I submitted this post I saw that the network window had finally populated. Still, it was incredibly slow and happened after the window showed a message saying "This folder is empty."
If I go to This PC that comes up almost instantly, including the mapped network drives.
My friend happened to look in Devices and Printers, and in the Multimedia Devices section he had about 10 devices showing up that he never heard of. Six of them were computers with names that he had never heard of, the others were devices that we could not tell what they were.
I expect that these entries mean that at some time they were on the same network that he was on. Would that be correct?
If so, then it is a matter for concern because he never goes on public networks. He only goes on his network at home, and a network in a small office that he rents and shares with one other person. They have their own router with security set up on it, and that router is connected to an Ethernet jack that most likely goes to a switch on a network that also provides internet service to some other offices in the same building.
This computer is only about 2 months old, so these entries can't be too old.
When I looked at his computer, he was on his home network and all those other devices showed as Offline. I right clicked on them all and removed them. Would it be a good guess that perhaps the security of the network at his office was compromised, and those devices were connected to that network at some point?
I told him to monitor and see when they reappear, but he won't be back in that office for 2 weeks.
My desktop computer (Win 7 Pro 32 bit) has two local printers, both with the share attribute, and is the server on a wireless LAN containing my wife's ASUS tablet (Win 8.1RT). Until recently she could print using the shared printers, but now cannot. The printer sare detected, but on trying to print, an error message says that theserver print spooler service is not running. But it definitely is - I have checked with Admin Tools, checked that it starts automatically, tried stopping and restarting it. The ASUS can still see and open shared files and folders. The printer drivers are up to date on both machines and work perfectly on the server. I am beginning to think that a Win 8 update has changed something?
View 3 Replies View RelatedEvery time I plugin a device (Memory card, Cell phone etc.) Windows 8.1 automatically opens Devices and Printers which is very annoying. I set Autoplay to "Take no action" but in vain. How can I disable this behavior?
View 9 Replies View RelatedFor some reason the green bar goes all the way across the top of the screen before the devices and printers menu will load. In then loads without an issue after waiting for almost two full minutes. This is a core I7 Win 8.1 PC with 16GB of ram and an SSD so it screams otherwise.
I do have a lot of devices on my home network but my windows 7 PC which is on the same network loads the devices and printers menu almost instantly. If it were a device hanging up you would think that the Windows 7 PC would also be affected but it isn't. I will say that Windows 8.1 does identify a whole lot more devices that fall into the category of "multimedia devices" on the network than does windows 7.
When I click on Network the next window show
View 9 Replies View RelatedMy friend happened to look in Devices and Printers, and in the Multimedia Devices section he had about 10 devices showing up that he never heard of. Six of them were computers with names that he had never heard of, the others were devices that we could not tell what they were.
I expect that these entries mean that at some time they were on the same network that he was on. Would that be correct?
If so, then it is a matter for concern because he never goes on public networks. He only goes on his network at home, and a network in a small office that he rents and shares with one other person. They have their own router with security set up on it, and that router is connected to an Ethernet jack that most likely goes to a switch on a network that also provides internet service to some other offices in the same building.
This computer is only about 2 months old, so these entries can't be too old.
When I looked at his computer, he was on his home network and all those other devices showed as Offline. I right clicked on them all and removed them. Would it be a good guess that perhaps the security of the network at his office was compromised, and those devices were connected to that network at some point?
I told him to monitor and see when they reappear, but he won't be back in that office for 2 weeks.
We just got a Win 8 machine, and finally decided to make a workgroup to share printers. made the workgroup, named workgroup, on the new win8 box. two desktops with win7 connected perfectly.
I cannot get the xp laptop to connect, I changed the Name from mshome to workgroup, but it still does not work.
So, have a client who runs Windows 8. Can't print to any of the printers in their office. They have shared / wireless and a couple of USB connected ones. Each one installed /configured indivdually and the test print will queue up but nothing will happen, it just sits there and does nothing
The ONLY thing i could managed to get to print was through bullzip (pdf creator )
check printer spooler
checked permissions on spooler/printers folder
re-installed printers different ways
they all seem to install just fine, but won't print
Computer has been rebooted several times to no avail. I tried different drivers for each.... ??
This is regular workgroup/ not domain.
When I go to my "Device and Printers" it says under "Multimedia Devices" Blu-ray Disc Player. What is that for because I put a bluray disc in my drive but nothing happens. I was just wondering what is is there for if it doesn't play blu rays.
View 1 Replies View RelatedI have a Dell Inspiron laptop that I had to restore to the factory Dell settings recently. After formatting the hard drive and re-installing windows 8 I noticed that the computer name in the devices and printers panel was Dell, Inc. instead of the computer name that I put in when re-installing windows. Is there a way to change the computer name in the devices and printers panel so that it matches the computer name in the system panel? I can change the computer name by going into the system panel but that doesn't change the name in the devices and printer panel.
View 9 Replies View RelatedI just checked in my device manager and found and new device installed that I didn't install. It's a WAN miniport (Network Monitor) #2, which has the yellow triangle and exclamation point in it. Windows can't laod drivers required for this device. (code31)
I don't have any wireless hardware on my PC. This was installed on 5/15 and I believe it came with the last the 8 auto updates (18 of them I think) because the dates match. It wont update through device manager, it wont uninstall.
Since I installed W8 64x my networks drivers won't start at boot, therefore I have to disable the drivers via Device Manager and re-enable them in order to work. (see attachment for the only error I get - I don't know whether there is a log in another place?)
View 9 Replies View Relatedwhich is about the network drivers, I am using Intel desktop board dh61ww which has its on board LAN adapter named (Intel gigabit LAN) which uses Intel gigabit network controller driver, When i bought this computer I had no issues used it about 8 months with out any problems, but now its been 10 months of total. Before 6 days some person used my computer and after that i started facing this problem that is after every reboot i have to reinstall my drivers or restore the windows to a point that i saved. I have done fresh windows on this PC(three times) also with deleting and creating new partitions but still it keeps coming up. after shutdown when I login to my windows the task bar haves a red cross on network connections icon and in device manager there's an exclamation mark on network drivers. so i have to waste my time for restoring windows or reinstalling my network drivers.
View 1 Replies View RelatedI want to install Win 8.1 on my Laptop (K53SD)
But I can't find the drivers for it. Also there is no drivers for win 8.1 for my laptop in ASUS site.
How can I find drivers of ASUS K53SD for Win 8.1???
My laptop tends to install all the printers on the network where I work. I dont use any of those printers and having them installed is pointless and a pain. I can delete them, but it will go and install them all again. Is there anyway I can disable this so it doesn't keep doing it?
View 3 Replies View RelatedI have a 2 tb Network store on a 1 gig Ethernet, which worked fine on Windows 7.
I ran the upgrade advisor this facility and software was not identified as a potential problem.
However it does NOT WORK.
It just says it is incompatible on Windows 8.
The Novostore website is not useful.
There is no useful information as to if or when it will be made to work.
for some reason, windows 8 starts going mad (100% disk and ram usage) when i copy, highlight, or open a ~5gig mpeg2 file (hdtv recording)
right click > view image (to see full image)
no, this is NOT a disk problem...
i copied these exact same files from windows 7 the exact same day i copied them back to windows 8..
also windows 8 started going mad if i read these files from my backup drive AND my normal drive .. it happened with TWO separate files not just one and on BOTH hard drives windows 8 started with the 100% disk usage crap..
i did manage to delete both files through the command prompt, but it sure did take looong time... i then recorded another 5+gig tv show file on windows 8, and windows 8 started going crazy again ..
now my freaking hard disk does not show a normal status on a smart check!!
i'm 100,000,000% sure this is a windows 8 problem since i'm back on windows 7 using big mpeg2 files with no problems... but my f'ing smart check isn't showing good status anymore
also windows 8 loads my wrong network driver !!!
intel/windows8 loading the wrong network driver
I have a Gateway NV52L15U amd a8-based 15" laptop with win 8.it works pretty well except for a few things that I suspect are related, and I suspect all three are due to how 8 is managing the drivers of the devices
- Network performance, in terms of starting up, latching the WIFI AP successfully, and getting online, is unreliable. oddly, it seems that it does not like disabling the Ethernet [CAT5] device, leaving the WIFI enabled. If I leave both enabled, wifi performance seems more stable [gaining and holding the connection]
- When I disable the CAT5 connection using the windows 8 adapter settings pane, the utility will hang, but not consistently. sometimes it hangs until it is forced to stop via taskmanager or restart, but not always. sometimes it merely takes a VERY long time - showing the hated hourglass while it takes as long as 7-8 minutes.
- Shutdowns and/or restarts can take an extremely long time. However, it seems again that if both network adapters are enabled [builtin wifi and builtin Ethernet] the reboot or shutdown seems to go a bit more normally.
- Sometimes the WIFI will not actually connect, as evidenced by IE and/or Chrome being unable to access the network. if I check windows using the taskbar widget, it will show the system "Connected to .." the AP and having "Internet Access". That little utility is mis-reporting. When I DISABLE the WIFI adapter via control panel util, the little taskbar widget may, or may not, still show the WIFI Device as "Connected".... I assume that the adjustment of that feedback mechanism is caught waiting for something, so slow to respond to the disabling of the device
Yes, I have uninstalled via windows both devices AND their drivers, and reinstalled each using fresh, checked driver files from Gateway/Acer. all the issues were there before and after.
Windows detects my Ricoh AC104 on a wireless network but insists it's an HP 5Si MX and installs that driver. When it adds the printer, it loads the driver automatically and without choice or prompt. Perhaps the misidentification has something to do with the printer driver in between (Hawking HMPS1U). I need to force it to use the printer driver from Ricoh, but I've had no luck so far. Some things I've tried:
1. There's an installation program with the Ricoh driver, but it doesn't see the printer on a wireless network.
2. Going to the advanced options for the printer on the device manager, I can see the driver info but Windows will not permit changes. I tried as Administrator also. No difference.
3. Attempting to update the driver just leads to Windows telling me the (wrong) driver is up to date.
I installed Windows 8.1 build 9471 into my desktop. I use a TP Link TL-WN781ND wireless adapter to access my home network and the internet. I tried copying the drivers from Windows/System32/Drivres and installing them manually, I also downloaded the exe from the site but they still wouldnt connect. It would just say no connections found.
View 7 Replies View RelatedIs there a way to setup network profiles or something so that when I bring my Surface Pro to work and connect to the wireless network there it will use the static ip address I have but when I disconnect and then connect to my home wifi it will go back to DHCP? On my MacBook Pro I can go into the network settings and change the location profile I have setup for networks but I don't see anything like this for Windows 8.
View 4 Replies View RelatedThis morning I installed an optional update from Windows Update. It was Ralink Technology WLAN 802.11 wireless LAN card.
Since then, when I try to print to my wireless network printer, the network would disconnect then come back on after a while. The update shows up in Update History as successfully installed but not in the installed updates. System restore is of no support here. The network configuration page shows normal. The web does not appear to be affected. I made a new network connection for the printer but it did not work.
Is there a way to reverse this update or should I uninstall the 802.11 LAN card and let windows re-install anew.
The printer is a HP Officejet Pro 8600e
Windows 8.1 Pro with Media Center,
Windows 8.1
Comcast Gateway.
Pro Media can access 8.1 Network and Homegroup.
8.1 cannot access ant Pro Media. Network Error "Windows cannot access DesktopUsersPeteDocuments' (or any other folder)
Can access IP4 address.
Windows 8.1 new machine, came with 8, updated to 8.1 then 8.1 Update.
I downloaded the drivers for windows 7 x64bit for the SD card reader in my system. I have installed Windows 8.1 Pro x64.
I had the same issue with Windows 8 and now that I have settled on 8.1 need to fix my card reader. Funny thing is that the drivers from Microsoft load (2006) and all devices look fine in Device Manager.
Even after installing the link from Acer and even searching around and getting other ones from Lenovo, HP still no go.