Hardware Drivers :: Win 8.1 Pro - Locating Correct Drivers For Acer Extensa 5620 SD Card
Nov 29, 2013
I downloaded the drivers for windows 7 x64bit for the SD card reader in my system. I have installed Windows 8.1 Pro x64.
I had the same issue with Windows 8 and now that I have settled on 8.1 need to fix my card reader. Funny thing is that the drivers from Microsoft load (2006) and all devices look fine in Device Manager.
Even after installing the link from Acer and even searching around and getting other ones from Lenovo, HP still no go.
I just upgraded to Windows 8.1 from Windows 7, and I cannot get a wireless connection. I have a Linksys Wireless G Card v4.1, and I've attempted to use multiple different drivers, but none of them work. At one point I was able to get a "Network Controller" to show up, but after rebooting my computer, it went away (and I was unable to get it again). Is it possible to get an internet connection with my card and Windows 8.1? Or will I have to stick with Windows 7?
My internal multi card reader has been working fine for just under a year but just recently it has stopped recognising SD cards. When I insert a card it normally opens an explorer window but now it does nothing and does not show in file explorer.
Though if I click on .. file explorer/manage/disk management .. it then opens an explorer window for the card.
I have the setting in autoplay - memory card and removable drive set to open explorer.
I'm booting off my SSD which is drive C: and I have games and programs on an extra hard drive which was origanally drive H: but after a restart it switched to I: and when I go into Disk Management to change it Drive H: isn't there.
I bought a Micro SD Card 32GB from eBay. I am trying to copy files to it so I can transfer them from my PC to my Laptop, however whenever it finishes copying files and I plug it into my Laptop, it needs formatting. I have tried copying files to it and them plugging it back into my PC but it says it needs formatting again. It is annoying me because I am trying to copy a disk image which is 16gb and it takes hours to copy to the Micro SD Card but when i unplug it from my PC it suddenly needs formatting. I am using NTFS Format, i cant copy my files on Fat32. It also doesn't let me format the card, its saying 'Windows was unable to complete the format'. This Micro SD Card is basically unusable.
I am trying to print a gift card from the internet that someone sent me from Facebook. It is telling me I cannot print until I use One Note one time. I don't want One Note.... How can I get this off my computer so I can print. This is maddening... I buy a printer and computer and can't print until I use their product?
OK so I right clicked and made my printer the default and it still won't print. I ended up thinking I was deleting the print queue and my whole printer disappeared. Do I have to now reinstall my printer??????
I just purchased new Insignia multi-card reader connected to machine, got the windows connected sound, but nothing in the windows exporer pane (what was My computer in XP and Win 7)...went ahead and connected my cf card... still nothing, should show Nikon D3 (all may cards are named for the camera they get shot in ) ... ???
card is a transcend 16gb 1000x ... computer is win 8.1 pro 64bit, 16gb ram, processor: AMD a10-7850KAPU with Radeon R7 Graphics, Motherboard: Asus A88X-PRO
Just upgraded to Win 8.1 Pro from Win 8 on a Dell Latitude E6530. Everything was working fine; post upgrade, system does not recognize any of my SD cards upon insertion. [Don't even see a drive letter show up.] All other peripheral storage devices are fine.
In the device manager, under memory technology devices, I have Realtek PCIE CardReader Properties displayed twice. The two locations are: PCI bus 2, device 0, function 0; and PCI bus 2, device 0, function 1. Dell offered a driver update for the cardreader which I installed. Only 1 of these 2 actually updated.
My question is do I need to update both or is one enough?
I'm using Windows 8 x64, all updated, which had been working without problem for about 8 months now.
I noticed my internel card reader drives (9 pin USB header) kept disappearing and reappearing quickly, in both My Computer, and Device Manager. So I assumed it was dying and bought a new one, but it too did the same thing, so assumed it must be the USB connecter dying, and left it unplugged, and orderd an external card reader (yet to arrive).
Sadly my USB flash drives and USB hard drives started doing the same thing, front and back ports, these drives will disappear and reappear a few times then work as normal, weird thing is my USB printer, mouse, keyboard, and Sansa Clip+ work fine.
I tried testing in WinPE v4, and Linux (Ubuntu LiveCD) and everything seems to be working fine, including the internel card reader. So I reinstalled Windows 8 after trying fixes like uninstalling the USB Root entries in Device Manager, and messing with the USB power saving options in Windows, even though they're at the defaults and never caused problems before, but the internel card reader was doing the same thing again before even doing any updates, or installing drivers.
I have found a workaround for the reader, if I disable it within Device Manger before putting a card in, and then enabling the device it works, but once ejected it goes back to disappearing and reappearing again.
I have a newly home built MSI AM1i motherboard and have it running fine with Windows 8.1. I am trying to expand the number of SATA ports it has (comes with only 2). The mobo has a mini-PCIe card slot.
I purchased a AsMedia 106x, 2-port, mini-PCIe card (had to use a ribbon-cable extender to get it connected).
That all appears to be fine. I struggled a bit with drivers, but eventually found a Windows 7 AsMedia 106x driver set. Loaded that, seems ok.
Problem: When I go to device mgr, it does not see the added 2-ports. When I first boot up, during the black-screen phase, it does report that the AsMedia device is loading and will actually find/name a hard drive that I attach to one of the new ports. It then almost looks like it will load windows, give the nice little blue windows 8 flag and just sits there. I can hear a drive cycle every 2-3 seconds, but nothing.
I eventually have to hit the power button to shut down. If I disconnect the drive added to the new card, it will start up. The AsMedia device looks to load during a black-screen phase, but reports no device found, and then loads Win 8 Correctly. When I get in, again, no SATA ports shown for the new device.
I am trying to install a graphics card in my desktop pc. The heat sink on the card blocks the SATA port that the DVD drive is plugged into (SATA1) so I've switched the DVD drive to SATA2. The drive is now showing as connected to port2 in the BIOS, but in windows (Windows 8 64-bit) it isn't detecting the DVD drive at all? I've seen other posts about this on the internet suggesting to add a line to the registry, but I've done that and it doesn't solve the problem.
I have a Asus T100 tablet with 32GB SSD. I bought a 64GB SD card to augment the storage on the tablet. The problem I am having is that the SD card disconnects after a few minutes of no activity, I then have to take it out of the tablet and pout it back in. I then have the folder in my C Drive again. How do I prevent the SD card from disconnecting so that I can use it as additional storage?
Where to get the relavent OpenGl Drivers from for windows 8 ? Apps designed for Windows 8 are fine , anything which did play on Windows 7 (minecraft for example) just gets the same error message, "Bad videocard drivers! failed to find an accelerated OpenGL mode ".
I have Acer Aspire v5-571G and the Acer Launch Manager, does not start in my windows8.1. it just stays there, does not apear on screen or what so ever, its really hard to turn of wifi and bluetooth without it.
I have windows 8 installed on my Acer Aspire TimelineX and everything is working great, but sometimes I have the battery indicator, and sometimes I don't , I hate not knowing when my laptops gunna die.
Went to boot up my Acer this evening to no avail. I can see it start to cycle through searching the DVD drive and see the read/right red LED light for the hard drive go on for about 5 seconds, then nothing. No BIOS test pass beep. I know that it beeps once for passing, then continues to boot.
I took the side panel off and reseated all the connections including the Mem strips. At one time I left a strip out intentionally for a continuous beep, which is what it's suppose to do.
I have a acer aspire v5-743pg laptop. Apparently its brightness is so dim now even thou i set it to the highest brightness possible, i mean i use my laptop when it was in windows 8.1 in the lowest brightness and i can see everything fine, not too dark and not too bright.After downgrading it to windows 8, now even thou i set it in around half of the bar the brightness is still grayish like everything is like a shadow( i hope you understand what i say). Its just to dark for me now do you think i need to update some of my hardware if so, what hardware might it be?
I have recently bought an Acer S670MG or M679G desktop computer with the following specs.
Intel core 2 due 3.1ghz. 6mb L2 cache. 6gb ddr3 ram at 1066mhz bus Nvidia Geforce 9800GT 512mb/256bits external graphic card. 1tb SATA WD hdd.
And I have facing a problem that when I turned ON computer it sounds a beep and Acer Empowering People appears a couple of seconds then display is gone. then after coupe of seconds, again beeps sounds and again Acer logo appears and then starts the windows. Why this happens. because of that booting time is much longer.
In bios. I tried two hard drive modes. native ide and Raid. third is AHCI I think and this I did not try yet.
I have recently bought a ASUS X550LC Laptop in that. i was trying to install bluetooth drivers but it crashes frequently during the installation. i have tried a lot and i cant able 2 solve the problem.
Am using windows 8 pro with the synaptics drivers on my sony vaio, but they are taking ages to load in whenever I reboot/startup my laptop.
I was wandering if there are any tweaks I can do to make it load into my system tray quicker. I dont have many things loading at startup so I cant see what the problem is. I would like it to load in first rather than last.