In the device manager, under memory technology devices, I have Realtek PCIE CardReader Properties displayed twice. The two locations are: PCI bus 2, device 0, function 0; and PCI bus 2, device 0, function 1. Dell offered a driver update for the cardreader which I installed. Only 1 of these 2 actually updated.
My question is do I need to update both or is one enough?
I have the very latest Windows 8.1 update.
My internal multi card reader has been working fine for just under a year but just recently it has stopped recognising SD cards. When I insert a card it normally opens an explorer window but now it does nothing and does not show in file explorer.
Though if I click on .. file explorer/manage/disk management .. it then opens an explorer window for the card.
I have the setting in autoplay - memory card and removable drive set to open explorer.
I don't think the card reader is becoming faulty.
I have a Dell XPS 420 PC that I've upgraded to Windows 8. I'm now unable to connect my bluetooth headset.
How I can install an updated driver for the Media Card Reader and Bluetooth (its combined)?
I have a newly home built MSI AM1i motherboard and have it running fine with Windows 8.1. I am trying to expand the number of SATA ports it has (comes with only 2). The mobo has a mini-PCIe card slot.
I purchased a AsMedia 106x, 2-port, mini-PCIe card (had to use a ribbon-cable extender to get it connected).
That all appears to be fine. I struggled a bit with drivers, but eventually found a Windows 7 AsMedia 106x driver set. Loaded that, seems ok.
Problem: When I go to device mgr, it does not see the added 2-ports. When I first boot up, during the black-screen phase, it does report that the AsMedia device is loading and will actually find/name a hard drive that I attach to one of the new ports. It then almost looks like it will load windows, give the nice little blue windows 8 flag and just sits there. I can hear a drive cycle every 2-3 seconds, but nothing.
I eventually have to hit the power button to shut down. If I disconnect the drive added to the new card, it will start up. The AsMedia device looks to load during a black-screen phase, but reports no device found, and then loads Win 8 Correctly. When I get in, again, no SATA ports shown for the new device.
I downloaded all the driver for windows 8 by using service tag of my laptop. When I install JMicron Card Reader driver, I always get an error: "Installation fail!" how do I fix it.
View 4 Replies View Relatedfirst off this is a new fresh install of windows 8 i had to download and install 8.1 via updates. This computer is fully updated.
It is an older computer but I only use it for my TV to store Movie/Videos
ASUS M3A78-EM
AMD Phenom 8450 @ 2.1ghz
2gb gskill ram
blueray drive
3tb seagate
2tb wd
kingston 120gb SSD
after a fresh install everything worked fine until i tried to connect to my local network the onboard NIC has an error (code 10) it is a Realtek PCIe GBE Family NIC. after finding this i uninstalled and went to Realteks website and got the newest windows 8 64bit drivers. ran the install and it updated the drivers... but the device still cannot start so i uninstalled again and picked the drivers manually and that didn't change the issue either.
So i checked the back of the computer and noticed that non of the activity lights were lighting up on the NIC so i pulled the ram and battery AND power cord and let it sit. (ive delt with a similar issue before where a NIC would stay asleep and not wake up) after a wait i turned it back on and noticed that i had an orange light glowing again on the NIC.
After setting up the bios i booted back into windows only to see that as SOON as the driver were automatically installed the lights in the back go out and of course..... the device cannot start error.....
At this point I cant think of anything else to do. I do have a wireless card in the pcie slot that works fine. could that cause the onboard not to work? or... am i Just SOL and this is just a Windows 8 issue? should i just go and buy a PCIe network card?
Windows 8 or 8.1 upgrade....
I just purchased new Insignia multi-card reader connected to machine, got the windows connected sound, but nothing in the windows exporer pane (what was My computer in XP and Win 7)...went ahead and connected my cf card... still nothing, should show Nikon D3 (all may cards are named for the camera they get shot in ) ... ???
card is a transcend 16gb 1000x ... computer is win 8.1 pro 64bit, 16gb ram, processor: AMD a10-7850KAPU with Radeon R7 Graphics, Motherboard: Asus A88X-PRO
I am using Windows 8 Professional. I am using a Dell XPS 1510 and am using a PCI Express Realtek PCIe GBE Family Expresscard.
I have already downloaded the latest driver from Realtek from 09/26/12. I have ran Windows Updates. No matter what the Realtek PCIe GBE Family Local Connection loses internet connection.
This card worked fine for months in Windows 7 Pro. The card works fine in Windows 8 Safe Mode. However, when logged into Windows 8 in normal mode, the card will allow and have internet connection for 1 min 12 secs to 1 min 32 secs, at which point the internet connection drops. The wifi and internal NIC (10/100) connection work fine. I've changed the NIC binding order. I've disabled the internal NIC, and Bluetooth (just in case) in the BIOS. I've tried uninstalling the WiFi to force using the Realtek PCIe GBE Family card.
I have ran procmon in order to try to figure out what if any application runs within the 1 min 32 sec timeframe that may interrupt the Realtek PCIe GBE Family card and have uninstalled any suspected applications. I've tried disabling services one at a time to see if it makes a difference.
I have tried DHCP and Static IP addresses.
The problem seems to be something within Windows 8. Something with Windows 8 disables the Realtek PCIe GBE Family internet connectivity. I've tried everything to keep the connection alive, internet works fine, I get perfect gigabit level speeds up until the 1 min 12 secs to 1 min 32 secs then all I get is no network connectivity.
The Windows 8 Troubleshooter is useless. Even though it is setup with static IP it says it can't find the default gateway. The issue is not with the router, somehow not being compatible with Windows 8 or something else. The card worked fine with the same router in Windows 7 and the internal NIC card works with the router in Windows 8 so its not that the router has problems with Windows 8.
I've also already disabled the "Allow the computer to turn off this device" option in the cards Power Management tab (first thing I tried). I've set the Power Management options on the laptop to be set to Maximum Performance.
Everything else with the laptop in Windows 8 seems fine, only this PCI express card that enables gigabit connection is failing. Don't want to use the slower WiFi or 10/100 connection those are too slow for what I need.
I'm using Windows 8 x64, all updated, which had been working without problem for about 8 months now.
I noticed my internel card reader drives (9 pin USB header) kept disappearing and reappearing quickly, in both My Computer, and Device Manager. So I assumed it was dying and bought a new one, but it too did the same thing, so assumed it must be the USB connecter dying, and left it unplugged, and orderd an external card reader (yet to arrive).
Sadly my USB flash drives and USB hard drives started doing the same thing, front and back ports, these drives will disappear and reappear a few times then work as normal, weird thing is my USB printer, mouse, keyboard, and Sansa Clip+ work fine.
I tried testing in WinPE v4, and Linux (Ubuntu LiveCD) and everything seems to be working fine, including the internel card reader. So I reinstalled Windows 8 after trying fixes like uninstalling the USB Root entries in Device Manager, and messing with the USB power saving options in Windows, even though they're at the defaults and never caused problems before, but the internel card reader was doing the same thing again before even doing any updates, or installing drivers.
I have found a workaround for the reader, if I disable it within Device Manger before putting a card in, and then enabling the device it works, but once ejected it goes back to disappearing and reappearing again.
The PC is a Dell Inspiron 531.
I have been having some strange issues with transfers from a USB 3.0 compact flash reader lately. When I start the transfer the speeds top out at 130 Mb/s but soon drop to 0 Mb/s. This seems to happen the moment that Windows 8 "populates" the Explorer window. When I am getting normal speeds explorer shows no files in it's window that have transferred. Once the files that have transferred populate the window the transfer drops significantly for the remaining transfer. I have recorded a small video to show this. Very bizarrre. Almost seems like an indexing thing.
[URL] .....
I use a card and card reader for accessing lock boxes in my real estate profession. The company is called Sentrilock. I have installed their card reader utility and when I insert the card into the usb card reader, an internet window opens [URL]
If everything is working properly, there is supposed to be a green bar at the top of the screen to renew my card. It does not appear, tech support at Sentrilock says ports need to be open in the firewall but they couldn't give me further information.
System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 8.1, 64 bit
Processor: Intel(R) Core(TM) i5-3330 CPU @ 3.00GHz, Intel64 Family 6 Model 58 Stepping 9
Processor Count: 4
RAM: 8063 Mb
Graphics Card: NVIDIA GeForce GT 620, 1024 Mb
Hard Drives: C: Total - 1894353 MB, Free - 554948 MB; F: Total - 1430795 MB, Free - 308017 MB; G: Total - 99 MB, Free - 68 MB; I: Total - 953766 MB, Free - 881853 MB;
Motherboard: Dell Inc., 084J0R
Antivirus: Windows Defender, Disabled
When I upgraded from Win 7 to Win 8 the SD Card Reader on my Dell Latitude E5430 stopped working. It does not even appear in Windows Explorer. I installed all drivers on the Dell site.
View 1 Replies View RelatedI recently just upgraded to windows 8 and notice that my media card reader is not working. My usb works fine but when I try putting in my memory card on the slot, nothing happens. Is there a program I have to download or a driver??
View 8 Replies View RelatedI have no sound from internet explorer nor do I find a realtek audio driver but how do I know what to download
View 1 Replies View Relatedi Am trying to build my first PC with a Asus P8Z68M motherboard I have managed to get it all going but when I start it up its says - Using PCIE Gen 2 - cant find any device. What does this mean? Also, why does the PC beep at me whilst booting up?
View 9 Replies View RelatedI recently had a crash on my system while updating my ATI Radeon HD 5450 graphics card.
This occurred yesterday while updating to Catalyst v13.1, released on Jan 17 2013. Once I start the install, at around mid installation the BSOD appears and restarts my computer. I have since then done a clean install of Windows 8 Pro and it keeps appearing every time I try to update my graphics card. I've had this card for about a year now and with no problems until now.
The crash dump file appears in c:/windows/minidump
PC SPECS:
Gateway DX
Windows 8 Pro 64bit
AMD Athlon X2 Dual Core 2.7Ghz
6GB DDR2
ATI Radeon HD 5450 1GB
640GB HDD
Dump Files
View attachment 011913-13743-01.dmp
View attachment 011913-29000-01.dmp
Recently I decided to go ahead and update to the Windows 8.1 version of the Realtek HD Audio Driver. I procrastinated because it told me I'd have to uninstall the original audio driver and I knew it would take a while to do everything needed. It didn't work that after uninstalling the original audio driver, then restarting like Windows told me to do, I kept getting error messages that forced my computer to restart until eventually my computer let me log in and install the updated audio driver.
However, with the updated version of this driver I had the same issue I got with the original one only much much worse. The original Realtek HD Audio Driver that I had on my computer made music and videos sound absolutely awful when headphones were plugged in. I found out that this is because the driver automatically puts on so-called "enhancements" whenever headphones are plugged in. This was a very simple fix, simply go to "Sound", then under "Playback" you click on "Speakers", then go to "Enhancements" and check the box labeled "Disable all sound effects." Then sound through headphones would return to normal.
Well, with the Window 8.1 version of this audio driver, I can do the same thing, but it never stays that way. Every time I plug in my headphones, it resets back to having enhancements. The strange thing though is that it says the enhancements are disabled but when I reactivate the enhancements(No difference in sound quality) then deactivate it again, suddenly the sound through my headphones is back to normal.
Did the audio driver not install properly? Is there something I can do to permanently disable the audio enhancements?
I'm PC game player. Recently, some problems troubled me:
1, Game usually crashed
2, Some PC games are not compatible with my PC
So, I tried to download game software to improve it:
Game Booster and Game driver updater --- IObit Driver Booster Beta 2.0
I don't wanna change a new PC, if these two software are really useful to improve game performance.
[URL]
Whenever I use my computer, if I don't play any audio on my computer for a certain period of time, and I have to restart the computer.
It's really annoying because I like to view Facebook and Tumblr for a while before I do something such as playing Team Fortress 2.
I have been getting these errors in Event Viewer intermittently, every 1-2 weeks since upgrading to Windows 8.1 . I have an HP m6-1158 (specifications linked).
I had to get rid of my last computer because of constant BSODs because I changed out the graphics drivers so often. That's why I'm reluctant to do it again. A friend advised me to do it only if there's a problem, otherwise leave them alone. If I do update them, he said, it's best to go through the computer manufacturer. Last time when my computer failed, I installed drivers from AMD, so I have been avoiding theirs and Intel's websites.
With this system, that I've had since May of last year, I haven't been able to update the integrated Intel HD Graphics 4000 with this Windows 8 driver or this Windows 8.1 driver. Each time I tried, I got an error that my computer does not meet the necessary specifications. Therefore I left it alone and the only driver installs recorded in Device Manager for it are from when I bought the system in May 2013 and the 8.1 update in October.
The Radeon driver is from 2012 and came with my computer. According to Device Manager, it reconfigured or reinstalled for 8.1 but the driver version has not changed. I have not had any major issues with gaming performance. I tested Far Cry 3, which runs great.
I recently installed the game Papers. After constant crashes on startup, I contacted support, who advised me to change the AMD switchable graphics options for the game to High Performance. After that, it runs fine. That leads me to think that there is an issue with the Intel driver.
Code: Log Name: ApplicationSource: Application ErrorDate: 2014-01-24 9:50:42 PMEvent ID: 1000Task Category: (100)Level: ErrorKeywords: ClassicUser: N/AComputer: My-PCDescription:Faulting application name: MMLoadDrvPXDiscrete.exe, version: 2.0.0.0, time stamp: 0x5058197aFaulting module name: atiumdag.dll_unloaded,
[Code] .....
I downloaded the most recent version of the realtek drivers from toshiba site and i have no sound when plugging in headphones.
View 6 Replies View RelatedMy audio disappeared and stopped working. my audio icon has a red x on it and when i click it it wants to detect problems (it doesn't work).
what should i do? how should I diagnose the audio? I feel like this is hardware problem as it just happened out of the blue. The audio board has a USB connection (which is working) so the connection from it to the mother board is fine.
Installing and updating the driver did nothing. I can't get the device manager to detect the hardware (scanning does nothing).
I'm having trouble getting windows 8 to detect my RTL8188CU after installing the Windows 7 x64 drivers from realtek on Windows consumer preview. I had the exact same issue in developer preview and I was unable to solve it. I'm not sure wether doing a fresh install would solve issues rather than an upgrade to keep personal files.
View 2 Replies View RelatedI have the Dell Studio 1458 and i have Windows 8.1 Enterprise x64, When I try to install the video card which is: ATI Readeon Mobility HD 5400. I got Errors that say "there was an error when trying to install driver" (on devmgmt.msc).
Where can i find the correct drivers this version?
Here is my XML file with the results:
I have two wifi adapters i have been trying to get to work consistently with no luck for several days now. One had been working fine for a few weeks, then it stopped, i tried switching, and that one worked for half a day, then it stopped. Once it stops working the connection is 'limited' but works fine on other machines, or it says it is connected in settings but Chrome says it isn't online. So i wanted to try to install a different driver, having read that this can often be the solution.
But in both cases, there is no old driver to roll back to, and when i try to tell Windows to load a driver i've downloaded or have on a disc, it says, no, the one it already has is 'up to date', and it won't do it. Is there some way to dig around in the system to get rid of the driver it claims is better so i can try another one?
I downloaded the drivers for windows 7 x64bit for the SD card reader in my system. I have installed Windows 8.1 Pro x64.
I had the same issue with Windows 8 and now that I have settled on 8.1 need to fix my card reader. Funny thing is that the drivers from Microsoft load (2006) and all devices look fine in Device Manager.
Even after installing the link from Acer and even searching around and getting other ones from Lenovo, HP still no go.
I just upgraded to Windows 8.1 from Windows 7, and I cannot get a wireless connection. I have a Linksys Wireless G Card v4.1, and I've attempted to use multiple different drivers, but none of them work. At one point I was able to get a "Network Controller" to show up, but after rebooting my computer, it went away (and I was unable to get it again). Is it possible to get an internet connection with my card and Windows 8.1? Or will I have to stick with Windows 7?
View 3 Replies View RelatedSo somehow my main default printer got moved to the 'More' selection in CTRL+P of Windows 8 Reader. On the right hand side all I have is my PrinterShare (remote printer). I have to click 'More' then I see my Fax and my OfficeJet pop up. How to I move my officejet to the front line like it used to be?
View 1 Replies View RelatedWhy does every new O/S decide to remove undesired drivers and software? Same thing happened when moving from XP to Vista, and once you had Vista you sure had to get out of it!
Win 8 Pro N has physically deleted 3 multimedia controller drivers;
1. Type: Other unit, Mfg: Unknown, Location: PCI-bus 1, unit 0, function 0
2. Type: Other unit, Mfg: Unknown, Location: PCI-bus 1, unit 2, function 0
3. Type: Other unit, Mfg: Unknown, Location: On Microsoft ACPI-compliant system
Also, why hasn't Microsoft Fixit 50548 been adapted for Win 8 (i e possibillity to print picture or graphics to printer by right-clicking on file, then left-klick on Print on Menu that appeared. Also works to list contents of a drive on a printer output.
Yesterday I formatted my computer and today I was updating it to Windows 8.1 again. Everything was fine except I forgot to disconnect my hdd. During the update, it said it was detecting and fixing errors. When the update finished, I tried to open my hdd and it wasn't accessible. How can I recover the data?
View 7 Replies View RelatedSome setting must have changed. Or maybe it was the 8 to 8.1 update.
I use to get a notification at the upper right when I turned on an external HD, or inserted an SD card. I could click on it, and it gave me the opportunity to open it in explorer.
Now I don't get the notification.
The device works, but I have to go to My Computer if I want to see it in explorer.
Is there a setting for this somewhere?
