Hardware Drivers :: Windows 8 Loads Wrong Network Driver?
Mar 17, 2013
for some reason, windows 8 starts going mad (100% disk and ram usage) when i copy, highlight, or open a ~5gig mpeg2 file (hdtv recording)
right click > view image (to see full image)
no, this is NOT a disk problem...
i copied these exact same files from windows 7 the exact same day i copied them back to windows 8..
also windows 8 started going mad if i read these files from my backup drive AND my normal drive .. it happened with TWO separate files not just one and on BOTH hard drives windows 8 started with the 100% disk usage crap..
i did manage to delete both files through the command prompt, but it sure did take looong time... i then recorded another 5+gig tv show file on windows 8, and windows 8 started going crazy again ..
now my freaking hard disk does not show a normal status on a smart check!!
i'm 100,000,000% sure this is a windows 8 problem since i'm back on windows 7 using big mpeg2 files with no problems... but my f'ing smart check isn't showing good status anymore
Windows detects my Ricoh AC104 on a wireless network but insists it's an HP 5Si MX and installs that driver. When it adds the printer, it loads the driver automatically and without choice or prompt. Perhaps the misidentification has something to do with the printer driver in between (Hawking HMPS1U). I need to force it to use the printer driver from Ricoh, but I've had no luck so far. Some things I've tried:
1. There's an installation program with the Ricoh driver, but it doesn't see the printer on a wireless network.
2. Going to the advanced options for the printer on the device manager, I can see the driver info but Windows will not permit changes. I tried as Administrator also. No difference.
3. Attempting to update the driver just leads to Windows telling me the (wrong) driver is up to date.
which is about the network drivers, I am using Intel desktop board dh61ww which has its on board LAN adapter named (Intel gigabit LAN) which uses Intel gigabit network controller driver, When i bought this computer I had no issues used it about 8 months with out any problems, but now its been 10 months of total. Before 6 days some person used my computer and after that i started facing this problem that is after every reboot i have to reinstall my drivers or restore the windows to a point that i saved. I have done fresh windows on this PC(three times) also with deleting and creating new partitions but still it keeps coming up. after shutdown when I login to my windows the task bar haves a red cross on network connections icon and in device manager there's an exclamation mark on network drivers. so i have to waste my time for restoring windows or reinstalling my network drivers.
I have a 20mbps upload with my ISP and I'm getting around 18.5 consistently. I've started using Zoolz for backing up and I have been assured it does not throttle the bandwidth. It reports it is uploading at around 15-16mbps which would be absolutely fine but Task Manager and NetSpeedMonitor show the upload speed as considerably lower.
I've attached a screenshot showing the difference but I was wondering if Task manager and NetSpeedMonitor could be wrong at all? It seemed quite coincidental that the speed reported by Zoolz was roughly what I would expect. Is there any sort of traffic that wouldn't show with Task Manager?
I loaded Windows 8 x64 about a week ago, it has booted fine every day until this morning. Instead of the loading windows logo its just a black screen that never does anything, I tried safe mode but F8 does nothing. What would cause this? It loaded just fine about 10 times, the only problem I had was with the installation I had to disable the hyper-threading to install the 64-bit version.
Upgraded to Windows 8 from XP a couple of months ago.
Everything's fine except on occasion it loads up blank, like it's just been newly installed. It takes longer to boot when this happens (a couple of minutes as opposed to ~10-15 seconds). It still signs into my profile as normal, but then I'm displayed with this Metro Desktop screen:
If I right click> all apps then everything appears to still be there. A restart solves this and it loads normally.
I just went to a web site that I have been going to for years, and I was using the 'page down' key as I often do. I got to the end of the page, and I saw a "flash" - loading page, at the bottom of the screen, and the next page automatically loaded. I didn't have to click on "next". I just continued to "hit" the 'page down' key.
Is this the new normal, maybe coming, or just something unique to that web site. Because I like it. Using Firefox, windows 8.1
I have made a few changes to speed up Firefox that you see on Google in the "about:config" area. And I have added the "Fastest Fox" add-on.
If there is some setting I can do that would apply to "all" websites, I sure would like to do that.
As mentioned I have a USB network dongle that I use as a second network card. On my stationary pc it installed the driver automatically when plugged into the USB-port and it works perfectly. When I plug it into my laptop it also installs the driver automatically but.. the driver doesn't work and I have an exclamation mark saying the driver isn't working properly. I have tried reinstalling the driver countless times - no luck.
Both machines run the same version of Windows 8. What can I do?
I have a Toshiba Laptop with a Core i3 2.27 GHz 4GB DDR3 Dual Channel Memory and 500GB hard drive. Although this is a problem with both my laptop and desktop, desktop specs are in the specs section. When I boot up windows and then click Desktop in the Metro UI it loads very slowly. I have very minimal programs starting up with windows. I will post a screen shot below of what is starting up with windows boot on my laptop, and post the screen shot of my desktop when I get home. I believe that I have just what I should have booting. There is 2 Intel items that I left booting and some item names JJ, I am unsure if that is my user account or if that is some kind of spyware. Virus scans come back clean, I've done the boot time scan scanned the hard drive in my laptop from my desktop computer as well.
I need to reinstall Windows 8 and it tells me that I need to load a driver before the install can begin. How to do that or where to find the driver for my computer (HP ENVY m6 1125-dx). I know for a fact that its my hard disk driver... SATA driver?
I installed Windows 8.1 a few days ago and now I am having problem installing and updating driver software for any hardware. I tried downloading drivers with Windows update which gives error code 8007000d while installing after successfull download while other software updates install fine. Using device manager, it gives a error that windows found the driver but had problem installing it.
And finally, I tried to install it directly using executable but couldn't install. For instance, I tried to install AMD Catalyst software and everything in it installed except the drivers, catalyst control center, hydravision and every application software installed but just not the driver software. I also had problem with bluetooth software. All drivers installed fine when I installed the windows 8.1 but after few days, this problem began and now I am not able to install any of it. P.S. I tried all the measures to solve error 8007000d I found at the internet.
I have been trying to view webchat sites, the ones where you can type in a box and communicate with the person on the live stream however for some reason the video never loads. I have tried all browsers, updated etc but just doesnt work. In fact I cant even type in the message box.
I installed my fresh Windows 8.1 Enterprise 64 bits (build 9600), on my Acer V3-571G laptop.
When I go to device manager, and I want uninstall this driver.
--> Imaging devices
--> and Bluetooth,
When I Disable and Uninstall them, then, it's seems te drivers are gone! But when I restarts mine Laptop, the Imaging devices and bluetooth, comes back?
How I can complete remove that? In the standard Windows 8 (not 8.1) that was possible? But 8.1?
Moved from windows 7 to 8.1 Now not able to install driver for the HP deskjet 6980.
followed the wizard (add printer) and used windows update, showing the printer, but refuses to install.
The msg: windows can not find suitable driver, despite the driver was on the windows update list, and the cmd screen flashes for two seconds, hence not able to see what is says.
In order to play World of Warplanes, they recommended a rollback to a previous version of the driver. I unistalled the video driver, downloaded the old one and restarted the computer.
Now the monitor (or monitors, as I tried with an Acer and a Samsung one) both pop up a "Input not supported" right after the Windows Logo even if a try to boot in Safe Mode (so, no, I can't enter Advanced Recovery Mode). The same after I try to boot from a USB.
The same error I got when I installed Windows 8.1, a month ago, but after the "Input not supported" remained for 15 minutes or so it restarted a couple of times, and after 40 de minutes the installation begun. Now I'm waiting for 2 hours and nothing.
My windows 8 pro x64 was running normal until I added a logitech cordless rumblepad 2 which uses a USB receiver for the joypad, and after installing the drivers and plugging in windows 8 shows a black screen on first boot but boots normal after a warm reset, this happens every time I switch on until i do a warm reset.
I've tried several installs, gone to Lexmarks's site, searched the web, and I can't get a Lexmark z730 inkjet driver, or a work around that might work.
Do I resign myself to the inconvenience of using my XP laptop for the occasional print job, or can something be done?
So I downloaded an installer of a game game and it is 100% complete but it seems that I can't run the file. When I double click on it it just loads forever and I also noticed that in the Task Manager the Windows Defender is the highest in memory and cpu usage.
I currently own but don't have installed (although I did try installing on friday july 18 2014) a lsi megaraid 9341-4i raid controller. When I had it installed, I disabled the intel rst and used my marvell secondary controller for my optical drive putting my two ssd's I wanted to raid on the lsi controller. I also switched all of my storage settings for windows 8 to legacy and not UEFI in windows since the controller can only be seen by the motherboard in legacy mode. After that, I configured the lsi bios to create a raid 0 on the ssd's and proceeded to install windows 8.1 64 bit. When I get to the point of a fresh install of windows and it asks me to load a driver, I do and it finds the 9341-4i and installs the driver. However, when the driver is done installing, there is no raid array to be found. I redid the raid array with full initialization and still no dice. My question is: why is windows not seeing any raid array after the driver successfully installs. I am using the most current from LSI's website windows 8.1 64 bit driver for the card too.
I recently installed windows 8 on my MacBookPro with UEFI support, but I can't enable audio. I know that apple use BIOS emulation for windows and the assign different Hardware ID's for devices.
I tried changing inf file and it detected the required audio card driver, but it shows that device cannot start. It's Cirrus Audio CS4206B (AB83) sound card, but without emulation it shows it as intel audio card. It would be easier to get back to bootcamp, but I really want to make this work.
Accidentally switched off my computer. Now I can only get Windows 8 to load if I select the disc with Windows 8 on it from the boot menu.
If I look at the actual BIOS settings the HDD is stated to be disabled.
The main board is a Gigabyte GA-Z77 and the disc is a Crucial M4 SSD.
I tried getting the BIOS to reload but that made no difference.how I can enable the SSD again so that I don't have to go through the boot menu each time I start the computer.
ASUS X55C notebook I had windows 8.1 installed and my comp stop reading blue rays, so I called tech support. they told me to mail it in. they change my HDD cause a bad sector and installed normal windows 8 but changed my dvd/cd rom drive to matshita dvd ram. I use to have matshita dvd ram UJ8A0AS and it did play blue rays. now i'm calling back and they are trying to tell me that my model doesn't play BR's. that's the reason why I bought my computer. their call center verified all that. so can I add that driver to my device manager.
I tried all the different ways to install samsung usb driver but I couldn't. I installed samsung kies but didn't recognize the phone as well. i removed it and tried to download the update from windows and I got this message:
Now my Galaxy SII won't be recognized in windows 8. What should i do?
I've just set up a clean system installation (Win 8.1 PRo x64). As a part of it I obviously installed my printer driver. The printer is Lexmark E260d and I use Lexmark Universal Driver downloaded directly from Lexmark's webpage.
My surprise is that after installation I have two such printers available at my system:
- "Lexmark E260" - which is the name I gave during installation,
- "Lexmark International Lexmark E260d" - which is another device appearing as a printer.
Both drivers / devices (?) print correctly yet I can see some differences in their functionality descriptions, when choosing Properties / Hardware. Lexmark E260 device has there "Print queues" only while Lexmark International... device has three types "Printers", "Print queues" and "Universal Serial Bus controllers". Another thing is when I double click on devices icons in "Devices and Printers" window - Lexmark E260 brings well-known list of documents actually being printed and Lexmark International... brings printer configuration dialog allowing to see printing documents, customize printer setting and so on.
Why I have somehow two different printers appearing on my system? Should I remove one of them and which? How can I avoid duplicating devices when installing drivers?