HDD Disabled In BIOS But Win 8 Loads OK From Boot Override?
Aug 22, 2013
Accidentally switched off my computer. Now I can only get Windows 8 to load if I select the disc with Windows 8 on it from the boot menu.
If I look at the actual BIOS settings the HDD is stated to be disabled.
The main board is a Gigabyte GA-Z77 and the disc is a Crucial M4 SSD.
I tried getting the BIOS to reload but that made no difference.how I can enable the SSD again so that I don't have to go through the boot menu each time I start the computer.
View 2 Replies
ADVERTISEMENT
Apr 9, 2014
After the 8.1 Update yesterday the Windows Store keeps automatically opening at boot. After I close it it will then re-open fifteen minutes later.
View 3 Replies
View Related
Dec 12, 2013
I just built a desktop with a sabertooth x79 motherboard, and am running Windows 8.1 pro 64-bit. When I click the UEFI BIOS Firmware live tile via the change PC settings>update and recovery>recovery>etc. my computer reboots normally to Windows and will not open BIOS. I have tried accessing it using the delete and f2 keys, but this does nothing either.
I am up to date in terms of my BIOS, and am definitely running UEFI and not legacy.
View 2 Replies
View Related
Dec 15, 2013
I just got a refurbished ASUS K75DE laptop, and it came with Windows 8 on it. I am wanting to run a dual boot with Win7, so I disabled fast-boot just fine, and went into the UEFI BIOS and disabled the secure boot.
While I was there, I did like I have always done and set a BIOS boot-up password. I then proceed to boot to my Win7 installer USB Flash drive, but I was running low on battery power so I aborted the install and shut the computer down to try again later.
Now however when I get into BIOS to select boot priority, all options are grayed out except for system time and a few other non-essentials. At the bottom of the first BIOS screen it says "User Level : User" and I can't seem to find a way to reverse this issue. So now I'm stuck, can't boot to anything but the HDD because it is first by default.
View 9 Replies
View Related
Apr 27, 2014
.I have an HP Pavilion Slimline PC desktop. It does not allow me to boot from CD/DVD drive or USB connection. Windows 8.1. I wish to be able to use the boot options cd/dvd and all the USB options. I can't use any of the options. I list bios setup options and suggestions given to me from articles but I'm not sure I'm afraid of error. I don't have that much experience in bios setup.
Articles have said in BIOS setup Security is to be disabled. I suppose Legacy remains disabled(?). It is suggested that I shutdown and reboot.
BIOS Setup > Storage > Boot Order has this list:
UEFI Boot Sources
Windows Boot Manager
USB Floppy/CD[code]....
At bottom of this Boot Order Window are the options: F5=disable Enter=drag F10=accept ESC=cancel
Windows Boot Manager at the the top stops all other options.beneath it. How does that 'drag' work. Don'tr I have to move 'Windows Boot Manager' to the bottom?
And move ATAPI CD/DVD drive to the top? of this UEFI boot sources list?
Is it true that if there is an error in the BIOS Boot Setup and Windows 8.1 does not boot, the BIOS Setup will come up instead so one can do a fix?
View 18 Replies
View Related
Jul 29, 2014
I am having an issue with downgrading to Windows 7 and It's not nearly as easy as normally installing an OS. I get to the expanding files screen, and once the system reboots it goes back to the Windows 7 install screen. This is an issue, because it should continue with the installation.
View 2 Replies
View Related
Apr 10, 2014
Last night before going to bed my laptop said it was going to update within a day. I closed the lid as usual and the next day, when I opened it, it was stuck on a blank screen for a few minutes then up came the Asus screen, then into Automatic Repair, then Diagnosing your PC, then "Repairing Disk Errors. This might take more than an hour to complete."
I let it run for about 4 hours but with no effect. I tried a few times to no avail. No matter what I do - F8, F10, F12 - I can't do anything other than get into Bios. I fiddled around with some options, but there weren't many and nothing worked. Finally, I removed the hard drive and attached it to another laptop with a caddy and couldn't get in - it is corrupted and unreadable.
So do I simply need a new hard drive? Or is it possible the problem is even worse? A friend says he has a tool that might be able to retrieve some of my files, but at least my most important ones are in Dropbox.
The other concern I have is that even when I install a new hard drive, I don't know how to get an operating system back up. The laptop didn't come with a disk. How do i go about installing an OS? Windows 7 would be preferable, although it did have 8 on it previously.
The laptop is Asus Ultrabook S400C. It doesn't have an internal cd drive.
View 6 Replies
View Related
Dec 19, 2012
On a new Win 8 laptop I can't boot from a USB flash drive or even a CD unless I turn off secure boot in the BIOS?
This surely can't be progress?
View 9 Replies
View Related
Jan 1, 2013
is there a way to take picture from the whole of the monitor in bios or boot option?
View 5 Replies
View Related
Jun 23, 2013
I have a pretty new computer. Just a few months old. It is supposed to be a good one.
Dell XPS 8500
Quad core i7 processor
lots of memory and extras
This computer also has the 64 bit edition of Windows 8 installed on it. Windows 8 is driving me up the wall!!! I have had numerous problems with it since day 1.
As recently as a few days ago, my system was running reasonably okay. Then I downloaded a driver for my network card from the dell.com website. From that point on, I cannot get my computer to boot up properly. I have turned my computer off and on multiple times in hopes that it would correct whatever is wrong.
When I first turn my PC on, it will stay stuck at the Dell logo window for a while.
Sometimes it will make it past that and it will give me an error message that says:
"error sending end of post message to ME, system HALT!"
Also, I sometimes get a message which says:
"the last USB device you connected to the computer malfunctioned, and Windows did not recognize it.
Try reconnecting the device. If windows still does not recognize it, your device may not be working properly."
This is insanity. I have NOT connected any new USB devices to my computer.
I do not know what to do. I figured that the easiest thing might be to try simply reinstalling Windows 8 from scratch. So I inserted my Windows 8 reinstall disk that Dell sent me when I bought this thing. However, my computer will not boot from this disk. So I guess I am stuck.
View 9 Replies
View Related
Mar 9, 2013
Here are some of my system specs:
Dell Inspiron 17R 5721
OS Name Microsoft Windows 8
Version 6.2.9200 Build 9200
Processor Intel(R) Core(TM) i7-3517U CPU @ 1.90GHz, 2401 Mhz, 2 Core(s), 4 Logical
BIOS Version/Date Dell Inc. A03, 10/24/2012
SMBIOS Version 2.7
Embedded Controller Version 1.01
BIOS Mode UEFI
Secure Boot State On
Boot Device DeviceHarddiskVolume1
Installed Physical Memory (RAM) 8.00 G
As so many others have written, I can't change the boot-up order which means at this time, I can only boot from the hard disk.
I am hopeful that it is my ignorance that prevents me from accessing and changing the order, and that some good hearted soul will set my down the right path.
View 9 Replies
View Related
May 27, 2014
I'm trying to boot from the bios into a Windows 8.1 Recovery USB. When it loads it just goes to a black screen with moveable mouse pointer and will sit like that endlessly. However when I boot with an Acronis USB for example everything comes up on screen fine.
Why this is happening or what it indicates?, all this is occurring outside of Windows so things like drivers shouldn't be affecting the display.
View 9 Replies
View Related
Dec 20, 2013
When I turn the power on, my desktop PC (a Hewlett-Packard) goes into a BIOS startup routine that says "Preparing Automatic Repair" and then "Diagnosing Your PC" which has to finish before it will load Windows or any OS. I've seen it before, and usually it just takes a few seconds. But now it's stopping at the "Diagnosing" message and won't go any further. I turn it off and on, and it does the same thing again. I can get into the BIOS menus and choose other options like booting from another drive, recovery options, etc. but no matter what I choose it starts the BIOS over again and gets hung up on the "Diagnosing" step, so I can't boot ANYTHING.
Any way to bypass or break out of this BIOS startup loop so I can get to Windows?
View 7 Replies
View Related
Dec 26, 2012
After updating the BIOS to A09 Windows 8 won't boot anymore.
The BSOD reports an issue with winload.efi and error code 0XC0000001.
View 15 Replies
View Related
Jul 14, 2014
I have an error message at boot time that says [fail] twice then boots normally.
I have tracked it down in other posts to the bios which I change and it works for awhile but then mysteriously changes itself back.
Here is what I do.
F2 at Dell logo
move tab to "boot"
Reorder the boot order to the following:
Windows Boot Manager
UEFI Onboard LAN IPv4
UEFI Onboard LAN IPv6
then save and exit
machine reboots without error message
Runs/boots fine for awhile then message reappears.
Going back into BIOS shows Windows Boot Manager has moved to the bottom of the list again.
Repeating the fix is only temporary.
How can I set up the BIOS to stay where I put it?
I have a Dell running Win 8.1
View 5 Replies
View Related
Jan 6, 2013
I have Samsung slate xe700t1a and recently downloaded and installed the lates bios from Samsung. After the installation the machine rebooted and all I get is black screen. Not even the Samsung logo, just the blue power led light comes on. I have tried all the button combo boot up power windows key, vol up and down and nothing can't even access the bios. I contacted support and that was a waste of time. Maybe removing ssd drive and connecting using mini sata to sata cable on my pc.
View 2 Replies
View Related
Aug 21, 2013
I am using Windows 8 64 Bit and have lost the password for the Administrator Account (Local). I am only able to login using the Standard Account and unable to create any more admin accounts or make any changes, I am even unable to perform the Gateway Recovery as its asking for the Administrator Password. I even can't enter the BIOS to disable the Fast Boot or change the First Boot to USB so that I can use any other Image of Windows 8 to reinstall.
View 2 Replies
View Related
Jul 4, 2013
Bought a new laptop with preinstalled Windows 8, didn't like it, went into laptop bios, think i deleted some drivers or commands to get me into windows 8 again. dont see any driver options, boot options priorities and cant add new ones
Think i deleted the default one, have nothing under boot options. Once I started the machine it goes right to the bios
the boot devise driver into windows i think is missing.
Unrelated images not mine, but kinda looked like this: [URL] .....
View 4 Replies
View Related
Dec 9, 2013
I dual boot Windows 8.1 and linux, and I was wondering how to boot into the windows BIOS. I would like to enable virtualization so that I can run 64 bit virtual machines, but it does not give me the option to boot into the BIOS. No pressing Esc, delete, F11, or F12 boots me into the BIOS. I was not able to boot into the BIOS even before dual booting.
Have a sony viao laptop with Intel(R) Core(TM) i7-3632QM.
View 5 Replies
View Related
Feb 24, 2014
I have a Gateway desktop computer about a year old. It had been working perfectly, but today when I restarted it, I got an error message saying " no boot disk has been detected or the disk has failed." At the bottom of the screen was a message saying to use the delete key to enter BIOS set up. I went into the bios set up, but didn't see anyway to check my hard drives...
View 5 Replies
View Related
Jul 2, 2014
It has an ASUS M2N-E motherboard with an old single core AMD Athlon 64 (I cannot remember which model specifically).
Last week, I provided him with a couple of old HDDs and 8GB worth PC-5300 DDR2 667 MHz RAM. We also installed Windows 8.1 64-bit, and other than the CPU being a single core and a bit slow, things were proceeding relatively smoothly.
He has an NVIDIA Geforce 8500 on the board, and he's ordered a PNY-made Geforce GTX 650 that's on it's way at present.
He's wanting to upgrade the CPU to the AMD PHENOM X4 9950, so we've been periodically meeting over the past couple of weeks to perform surgery on this old machine.
At any rate, we found that to update the CPU, we needed to update his BIOS from the one that was installed, which was at revision 0502. The needed BIOS revision for the CPU was 1504, but would also work with revision 1701.
After jumping through several hoops to update the BIOS, we updated it to 1701. However, since then the machine will not boot into Windows 8.1. He gets an instant BSOD. I did not see the error code, so I cannot say what it was. He told me that he's attempted to do a repair install to no avail. The repair attempt results in a constant loop of the machine rebooting and BSODing.
At any rate, here are some URLs that detail the board specs and the list of BIOS revisions for that board.
Motherboard Specs: Motherboards - M2N-E - ASUS
CPU Compatibility list: ASUSTeK Computer Inc. -Support- CPU Support M2N-E
View 2 Replies
View Related
Oct 11, 2013
I had a bit of a problem with Malware which led me to reinstall windows 8. I had also at the time been trying to install Linux to dual boot beside it. However, upon reinstalling I got the annoying watermark saying "Secureboot isn't configured correctly." Having decided I would rather remove the watermark and having gone back into the BIOS (with a reinstall) and trying to enable secure boot I get a message - "CSM is Loaded! Disable the CSM via Setup and repeat operation after Restart".
However there is, as far a I can see no option to disable the CSM in my bios - I've tried disabling anything related to Legacy and reinstalling both Ubuntu and Windows 8 as well as wiping the drive and jumping the CMOS as well as updating the BIOS.
I've tried every permutation in the BIOS. Could possibly be an incompatibility with graphics card, but wouldn't know where to start on that end if it is.
View 9 Replies
View Related
Nov 13, 2012
My Acer Extensa 5620Z originally came with Vista, then I clean installed Win 7, now upgraded to Win 8. Since the latest upgrade, I am unable to access BIOS or the boot menu. The black and white boot screen used to say to press F12 for boot menu, and something else for Setup, those messages are no longer there. And those key combinations do not work. I've also tried some other combinations I've found in searches - F2, Alt-F10, ctrl F10, alt ctrl F10, F8, del, esc. None work.
Could the upgrade has modified the firmware somehow? Boot screen says Phoenix bios, TrustedCore v1.32 - I think that is the same it has been.
View 5 Replies
View Related
Nov 27, 2012
My bios shows uefi boot option but no uefi shell... I enabled uefi boot option and booted my dvd it asked me to partition my hd using a GPT format... I even did so so... but when I run
Code:
bcdedit /enum
In elevated command prompt it shows me this
Code:
Windows Boot Manager
--------------------
identifier {bootmgr}
device partition=DeviceHarddiskVolume1
description Windows Boot Manager
[Code] .....
The bold line means my system does not boot from efi... isn't it?
View 9 Replies
View Related
Apr 21, 2012
Will it be possible to boot Windows 8 from a GPT partition using BIOS (not UEFI)? I'll be using the 64bit version.
Technically, I know it's possible as I'm doing it with FreeBSD, many Linux distros etc. Using hybrid MBR/GPT, I've read others have Win7 booting off GPT partitons as all. I'd rather not go that route.
View 2 Replies
View Related
Aug 24, 2011
Ok, I'm up the wall on this, I'm trying to get a copy of Windows to install on a flash drive and boot from BIOS, but there's almost now way of doing so.
I remembered that Windows 8 7850 build had or has a feature called Portable Workspace where Windows will install onto a flash drive so you can take it to any puter you please. That's great and all, but where in the blue hell is it?! :stomp: It's like it's not there. Do I need something special to do something to it or what?
View 3 Replies
View Related
Dec 14, 2013
Ok so i have 2 months lenovo ideapad z580 laptop..i am unable to access UEFI BIOS menu and boot menu anymore these were the steps i tried with my laptop.
1) I have windows 8.1 tried going to pc settings and selected uefi settings on restart But the problem still persist the laptop is just doing normal windows 8 boot
2) Tried pressing/hitting F1,F2,F12,DEL keys
3) I have also used lenovo one key recovery button there it showed "bios setup" when i selected it and hit enter it is just doing normal windows 8 boot still i can't access uefi bios
4) Tried updating BIOS for the laptop but unfortunately there was no bios update for this model
5) Tried resetting Laptop by removing battery and ac adapter and pressing and holding power button for 30 seconds but still no use i can't access BIOS yet
6) I tried removing the internal hard drive Out of the laptop and this time one starnage thing happened " before with internal hard drive i used to get lenovo splash screen when turning ON but after removing hard drive and when i try to access bios i can't see the lenovo splash screen at all" still i can't access BIOS!!!
7) I even have tried holding down Shift key, letter B when starting up the laptop but still didn't work seems like windows 8.1 makes changes to BIOS?
View 9 Replies
View Related
Jul 5, 2014
I can't enter my BIOS/UEFI after activating "MSI Fast Boot" in the BIOS/UEFI.
I read somewhere about "GO2BIOS",but my installation disk didn't came with that software.
MB: H81M-E34 (MSI Global H81M-E34)
View 2 Replies
View Related
Oct 19, 2013
I have an Acer Aspire laptop which has recently stopped booting up. It doesn't display anything when powered on. I know it is not a problem with windows because it doesn't even display the Bios boot screen. Why is this? The fans start but I cant hear the hard drive.
View 4 Replies
View Related
Jan 24, 2014
My wife has a new Asus X750j Laptop.
I've spent the last day and a half setting it up.Now I want to make a system image of the C: drive using Paragon.
I do this from a bootable DVD, but it isn't set to boot to the DVD first in the boot order.
I've tried tapping the F11, F8, Del, Esc and F2 keys and it just boots into Windows 8.
My computer which has an ASUS motherboard, shows a message when I boot, saying select "Delete" to boot into the UEFI Bios.
But I can't seem to get either a boot menu of the bios option on the laptop.
View 17 Replies
View Related
Aug 22, 2014
I have just bought a Toshiba Satellite laptop. Before installing everything I wanted to partition the hard drive, for various reasons. To do so, I installed EASUS Pro. (Have used that many, many times on my W7 PC without a problem.) Anyway, it went away to resize the boot partition and now I can't do a !@#%$ing thing. The laptop boots to a 0xc0000225 error screen, and that's it. I entered the UEFI Firmware Settings, and managed to firstly change the fn keys to standard (YAY!) but I CANNOT use the F10 key to save the boot priority to CD/DVD or anything else, so I have nowhere to go from there.
View 2 Replies
View Related
